]> git.sur5r.net Git - u-boot/commitdiff
display5: Support for the emergency PAD pressing
authorLukasz Majewski <lukma@denx.de>
Fri, 11 May 2018 14:51:08 +0000 (16:51 +0200)
committerStefano Babic <sbabic@denx.de>
Mon, 18 Jun 2018 13:42:38 +0000 (15:42 +0200)
To enter the special mode, one needs to short cut two pads with e.g. screw
driver.

After power up the SPL will execute u-boot in which proper actions will be
taken.

It is worth noting that we do not alter envs (even the BOOT_FROM variable)
and unconditionally go to recovery.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
board/liebherr/display5/common.c
board/liebherr/display5/common.h
board/liebherr/display5/display5.c
board/liebherr/display5/spl.c
include/configs/display5.h

index 26575f73bdcb2a504cbb61174e1dc27f6bf2fe39..4eb86d8c5d7faddf700d40780c7b95d9a7801a09 100644 (file)
@@ -34,6 +34,16 @@ void displ5_set_iomux_uart(void)
        SETUP_IOMUX_PADS(uart_pads);
 }
 
+iomux_v3_cfg_t const misc_pads_spl[] = {
+       /* Emergency recovery pin */
+       MX6_PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+void displ5_set_iomux_misc_spl(void)
+{
+       SETUP_IOMUX_PADS(misc_pads_spl);
+}
+
 #ifdef CONFIG_MXC_SPI
 iomux_v3_cfg_t const ecspi_pads[] = {
        /* SPI3 */
index a507ef9ce83e61cd033555ef54a1b54b50cd71fc..78c64b02e280a8d7e2c6707b7a67a99ee72e7dc4 100644 (file)
@@ -37,5 +37,6 @@ void displ5_set_iomux_ecspi_spl(void);
 void displ5_set_iomux_ecspi(void);
 void displ5_set_iomux_usdhc_spl(void);
 void displ5_set_iomux_usdhc(void);
+void displ5_set_iomux_misc_spl(void);
 
 #endif /* __DISPL5_COMMON_H_ */
index ebc643e7e3f1a5c8358f080b491e16c64e05abd9..4bade476a55be476264a151fb5c292be7a66dc37 100644 (file)
@@ -44,6 +44,7 @@ static bool sw_ids_valid;
 static u32 cpu_id;
 static u32 unit_id;
 
+#define EM_PAD IMX_GPIO_NR(3, 29)
 #define SW0    IMX_GPIO_NR(2, 4)
 #define SW1    IMX_GPIO_NR(2, 5)
 #define SW2    IMX_GPIO_NR(2, 6)
@@ -179,6 +180,9 @@ iomux_v3_cfg_t const misc_pads[] = {
 
        /* XTALOSC */
        MX6_PAD_GPIO_3__XTALOSC_REF_CLK_24M | MUX_PAD_CTRL(NO_PAD_CTRL),
+
+       /* Emergency recovery pin */
+       MX6_PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
 };
 
 #ifdef CONFIG_FSL_ESDHC
@@ -369,7 +373,22 @@ static inline void setup_boot_modes(void) {}
 
 int misc_init_r(void)
 {
+       int ret;
+
        setup_boot_modes();
+
+       ret = gpio_request(EM_PAD, "Emergency_PAD");
+       if (ret) {
+               printf("Can't request emergency PAD gpio\n");
+               return ret;
+       }
+
+       ret = gpio_direction_input(EM_PAD);
+       if (ret) {
+               printf("Can't set emergency PAD direction\n");
+               return ret;
+       }
+
        return 0;
 }
 
index 0d25b0d99632fd6faaf6f21c4d37215adef378c1..551a14347da6c47b2b33c6fccbe94d33f70ed190 100644 (file)
@@ -16,6 +16,7 @@
 #include <asm/arch/imx-regs.h>
 #include "asm/arch/iomux.h"
 #include <asm/mach-imx/iomux-v3.h>
+#include <asm/gpio.h>
 #include <environment.h>
 #include <fsl_esdhc.h>
 #include <netdev.h>
@@ -194,10 +195,24 @@ void board_init_f(ulong dummy)
        /* Clear the BSS. */
        memset(__bss_start, 0, __bss_end - __bss_start);
 
+       displ5_set_iomux_misc_spl();
+
        /* load/boot image from boot device */
        board_init_r(NULL, 0);
 }
 
+#define EM_PAD IMX_GPIO_NR(3, 29)
+int board_check_emergency_pad(void)
+{
+       int ret;
+
+       ret = gpio_direction_input(EM_PAD);
+       if (ret)
+               return ret;
+
+       return !gpio_get_value(EM_PAD);
+}
+
 void board_boot_order(u32 *spl_boot_list)
 {
        /* Default boot sequence SPI -> MMC */
@@ -206,6 +221,13 @@ void board_boot_order(u32 *spl_boot_list)
        spl_boot_list[2] = BOOT_DEVICE_UART;
        spl_boot_list[3] = BOOT_DEVICE_NONE;
 
+       /*
+        * In case of emergency PAD pressed, we always boot
+        * to proper u-boot and perform recovery tasks there.
+        */
+       if (board_check_emergency_pad())
+               return;
+
 #ifdef CONFIG_SPL_ENV_SUPPORT
        /* 'fastboot' */
        const char *s;
index f5656a29ff005a2207a671d3294dbac6719cd600..c4cd2ff6f9c225a355298211af18201ba8d10772 100644 (file)
 #define CONFIG_BAUDRATE                        115200
 
 #ifndef CONFIG_BOOTCOMMAND
-#define CONFIG_BOOTCOMMAND "if test ${BOOT_FROM} = FACTORY; then " \
+#define CONFIG_BOOTCOMMAND "if run check_em_pad; then " \
+            "run recovery;" \
+       "else if test ${BOOT_FROM} = FACTORY; then " \
             "run factory_nfs;" \
        "else " \
             "run boot_mmc;" \
-       "fi"
+       "fi;fi"
 #endif
 
 #define PARTS_DEFAULT \
 
 #define CONFIG_EXTRA_ENV_SETTINGS        \
        PARTS_DEFAULT \
+       "gpio_recovery=93\0" \
+       "check_em_pad=gpio input ${gpio_recovery};test $? -eq 0;\0" \
        "display=tianma-tm070-800x480\0" \
        "board=display5\0" \
        "mmcdev=0\0" \