Changes for U-Boot 1.1.1:
======================================================================
+* Modify KUP4X board configuration to use SL811 driver for USB memory
+ sticks (including FAT / VFAT filesystem support)
+
+* Add SL811 Host Controller Interface driver for USB
+
+* Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README
+
+* Patch by Pantelis Antoniou, 19 Apr 2004:
+ Allow to use shell style syntax (i. e. ${var} ) with standard parser.
+ Minor patches for Intracom boards.
+
+* Patch by Christian Pell, 19 Apr 2004:
+ cleanup support for CF/IDE on PCMCIA for PXA25X
+
* Temporarily disabled John Kerl's extended MII command code because
"miivals.h" is missing
The length in bytes of the EEPROM memory array address. Note
that this is NOT the chip address length!
+ - CFG_I2C_EEPROM_ADDR_OVERFLOW:
+ EEPROM chips that implement "address overflow" are ones
+ like Catalyst 24WC04/08/16 which has 9/10/11 bits of
+ address and the extra bits end up in the "chip address" bit
+ slots. This makes a 24WC08 (1Kbyte) chip look like four 256
+ byte chips.
+
+ Note that we consider the length of the address field to
+ still be one byte because the extra address bits are hidden
+ in the chip address.
+
- CFG_EEPROM_SIZE:
The size in bytes of the EEPROM device.
Note that this is a global option, we can't
have one FEC in standard MII mode and another in RMII mode.
+- CONFIG_CRC32_VERIFY
+ Add a verify option to the crc32 command.
+ The syntax is:
+
+ => crc32 -v <address> <count> <crc32>
+
+ Where address/count indicate a memory area
+ and crc32 is the correct crc32 which the
+ area should have.
+
Building the Software:
======================
/* unlock mode register */
*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
__asm__ volatile ("sync");
-
+
/* precharge all banks */
*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
__asm__ volatile ("sync");
/* set mode register */
*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
__asm__ volatile ("sync");
-
+
/* normal operation */
*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
__asm__ volatile ("sync");
ulong dramsize2 = 0;
#ifndef CFG_RAMBOOT
ulong test1, test2;
-
+
/* setup SDRAM chip selects */
*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;/* 2G at 0x0 */
*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;/* disabled */
if (dramsize < (1 << 20)) {
dramsize = 0;
}
-
+
/* set SDRAM CS0 size according to the amount of RAM found */
if (dramsize > 0) {
*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
}
-
/* let SDRAM CS1 start right after CS0 */
*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
} else {
dramsize2 = test2;
}
-
+
/* memory smaller than 1MB is impossible */
if (dramsize2 < (1 << 20)) {
dramsize2 = 0;
}
-
+
/* set SDRAM CS1 size according to the amount of RAM found */
if (dramsize2 > 0) {
*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize
ulong dramsize = 0;
#ifndef CFG_RAMBOOT
ulong test1, test2;
-
+
/* setup and enable SDRAM chip selects */
*(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
*(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */
/* set SDRAM end address according to size */
*(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
-
+
#else /* CFG_RAMBOOT */
/* Retrieve amount of SDRAM available */
LIB = lib$(BOARD).a
-OBJS = $(BOARD).o ../common/flash.o ../common/kup.o usb.o
+OBJS = $(BOARD).o ../common/flash.o ../common/kup.o
$(LIB): .depend $(OBJS)
$(AR) crv $@ $(OBJS)
+++ /dev/null
-/*
- * (C) Copyright 2004
- * Klaus Heydeck, Kieback & Peter GmbH & Co KG, heydeck@kieback-peter.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-#include "../common/kup.h"
-
-
-#define SL811_ADR (0x50000000)
-#define SL811_DAT (0x50000001)
-
-
-static void sl811_write_index_data (__u8 index, __u8 data)
-{
- *(volatile unsigned char *) (SL811_ADR) = index;
- __asm__ ("eieio");
- *(volatile unsigned char *) (SL811_DAT) = data;
- __asm__ ("eieio");
-}
-
-static __u8 sl811_read_index_data (__u8 index)
-{
- __u8 data;
-
- *(volatile unsigned char *) (SL811_ADR) = index;
- __asm__ ("eieio");
- data = *(volatile unsigned char *) (SL811_DAT);
- __asm__ ("eieio");
- return (data);
-}
-
-int usb_init_kup4x (void)
-{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- int i;
- unsigned char tmp;
-
- memctl = &immap->im_memctl;
- memctl->memc_or7 = 0xFFFF8726;
- memctl->memc_br7 = 0x50000401; /* start at 0x50000000 */
- /* BP 14 low = USB ON */
- immap->im_cpm.cp_pbdat &= ~(BP_USB_VCC);
- /* PB 14 nomal port */
- immap->im_cpm.cp_pbpar &= ~(BP_USB_VCC);
- /* output */
- immap->im_cpm.cp_pbdir |= (BP_USB_VCC);
-
- puts ("USB: ");
-
- for (i = 0x10; i < 0xff; i++) {
- sl811_write_index_data (i, i);
- tmp = (sl811_read_index_data (i));
- if (tmp != i) {
- printf ("SL811 compare error index=0x%02x read=0x%02x\n", i, tmp);
- return (-1);
- }
- }
- printf ("SL811 ready\n");
- return (0);
-}
#include <common.h>
#include <miiphy.h>
#include <sed156x.h>
+#include <status_led.h>
#include "mpc8xx.h"
extern int drv_phone_init(void);
extern int drv_phone_use_me(void);
+extern int drv_phone_is_idle(void);
int misc_init_r(void)
{
do_poll();
if (drv_phone_use_me()) {
+ status_led_set(0, STATUS_LED_ON);
+ while (!drv_phone_is_idle()) {
+ do_poll();
+ udelay(1000000 / CFG_HZ);
+ }
+
console_assign(stdin, "phone");
console_assign(stdout, "phone");
console_assign(stderr, "phone");
static int refresh_time;
static int blink_time;
static char last_fast_punct;
-static int last_tab_indicator = -1;
/*************************************************************************************************/
refresh_time = REFRESH_HZ;
blink_time = BLINK_HZ;
- tab_indicator = 1;
-
memset(vty_buf, ' ', sizeof(vty_buf));
memset(last_visible_buf, ' ', sizeof(last_visible_buf));
sed156x_init();
width = sed156x_text_width;
height = sed156x_text_height - 1;
+
+ tab_indicator = 0;
}
/*****************************************************************************/
if (input_mode != last_input_mode)
sed156x_output_at(sed156x_text_width - 3, sed156x_text_height - 1, input_mode_txt[input_mode], 3);
- if (tab_indicator != last_tab_indicator)
+ if (tab_indicator == 0) {
sed156x_output_at(0, sed156x_text_height - 1, "\\t", 2);
+ tab_indicator = 1;
+ }
if (fast_punct != last_fast_punct)
sed156x_output_at(4, sed156x_text_height - 1, &fast_punct, 1);
last_input_mode = input_mode;
last_fast_punct = fast_punct;
- last_tab_indicator = tab_indicator;
}
/* ensure visibility; the trick is to minimize the screen movement */
blink_time = BLINK_HZ;
switch (c) {
- case 13: /* ignore */
+ case '\a': /* ignore bell */
+ case '\r': /* ignore carriage return */
break;
case '\n': /* next line */
break;
}
}
+
+/**************************************************************************************/
+
+int drv_phone_is_idle(void)
+{
+ return kp_state == SCAN;
+}
# define SHOW_BOOT_PROGRESS(arg)
#endif
+#ifdef __PPC__
+# define EIEIO __asm__ volatile ("eieio")
+#else
+# define EIEIO /* nothing */
+#endif
#undef IDE_DEBUG
dev, port, val, (ATA_CURR_BASE(dev)+port));
/* Ensure I/O operations complete */
-#ifdef __PPC__
- __asm__ volatile("eieio");
-#endif
+ EIEIO;
*((uchar *)(ATA_CURR_BASE(dev)+port)) = val;
}
#else /* ! __PPC__ */
{
uchar val;
/* Ensure I/O operations complete */
-#ifdef __PPC__
- __asm__ volatile("eieio");
-#endif
+ EIEIO;
val = *((uchar *)(ATA_CURR_BASE(dev)+port));
PRINTF ("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n",
dev, port, (ATA_CURR_BASE(dev)+port), val);
pbuf = (ushort *)(ATA_CURR_BASE(dev)+ATA_DATA_REG);
dbuf = (ushort *)sect_buf;
while (words--) {
- __asm__ volatile ("eieio");
+ EIEIO;
*pbuf = *dbuf++;
- __asm__ volatile ("eieio");
+ EIEIO;
}
if (words&1)
pbuf = (ushort *)(ATA_CURR_BASE(dev)+ATA_DATA_REG);
dbuf = (ushort *)sect_buf;
while (words--) {
-#ifdef __PPC__
- __asm__ volatile ("eieio");
-#endif
+ EIEIO;
*pbuf = *dbuf++;
-#ifdef __PPC__
- __asm__ volatile ("eieio");
-#endif
+ EIEIO;
*pbuf = *dbuf++;
}
#else /* CONFIG_HMI10 */
pbuf_odd = (uchar *)(ATA_CURR_BASE(dev)+ATA_DATA_ODD);
dbuf = (uchar *)sect_buf;
while (words--) {
- __asm__ volatile ("eieio");
+ EIEIO;
*pbuf_even = *dbuf++;
- __asm__ volatile ("eieio");
+ EIEIO;
*pbuf_odd = *dbuf++;
- __asm__ volatile ("eieio");
+ EIEIO;
*pbuf_even = *dbuf++;
- __asm__ volatile ("eieio");
+ EIEIO;
*pbuf_odd = *dbuf++;
}
#endif /* CONFIG_HMI10 */
PRINTF("in input data base for read is %lx\n", (unsigned long) pbuf);
while (words--) {
-#ifdef __PPC__
- __asm__ volatile ("eieio");
-#endif
+ EIEIO;
*dbuf++ = *pbuf;
-#ifdef __PPC__
- __asm__ volatile ("eieio");
-#endif
+ EIEIO;
*dbuf++ = *pbuf;
}
#else /* CONFIG_HMI10 */
pbuf_odd = (uchar *)(ATA_CURR_BASE(dev)+ATA_DATA_ODD);
dbuf = (uchar *)sect_buf;
while (words--) {
- __asm__ volatile ("eieio");
+ EIEIO;
*dbuf++ = *pbuf_even;
- __asm__ volatile ("eieio");
+ EIEIO;
*dbuf++ = *pbuf_odd;
- __asm__ volatile ("eieio");
+ EIEIO;
*dbuf++ = *pbuf_even;
- __asm__ volatile ("eieio");
+ EIEIO;
*dbuf++ = *pbuf_odd;
}
#endif /* CONFIG_HMI10 */
pbuf = (ushort *)(ATA_CURR_BASE(dev)+ATA_DATA_REG);
dbuf = (ushort *)sect_buf;
while (words--) {
- __asm__ volatile ("eieio");
+ EIEIO;
*dbuf++ = *pbuf;
- __asm__ volatile ("eieio");
+ EIEIO;
}
if (words&1) {
PRINTF("in output data shorts base for read is %lx\n", (unsigned long) pbuf);
while (shorts--) {
-#ifdef __PPC__
- __asm__ volatile ("eieio");
-#endif
+ EIEIO;
*pbuf = *dbuf++;
}
#else /* CONFIG_HMI10 */
pbuf_even = (uchar *)(ATA_CURR_BASE(dev)+ATA_DATA_EVEN);
pbuf_odd = (uchar *)(ATA_CURR_BASE(dev)+ATA_DATA_ODD);
while (shorts--) {
- __asm__ volatile ("eieio");
+ EIEIO;
*pbuf_even = *dbuf++;
- __asm__ volatile ("eieio");
+ EIEIO;
*pbuf_odd = *dbuf++;
}
#endif /* CONFIG_HMI10 */
PRINTF("in input data shorts base for read is %lx\n", (unsigned long) pbuf);
while (shorts--) {
-#ifdef __PPC__
- __asm__ volatile ("eieio");
-#endif
+ EIEIO;
*dbuf++ = *pbuf;
}
#else /* CONFIG_HMI10 */
pbuf_even = (uchar *)(ATA_CURR_BASE(dev)+ATA_DATA_EVEN);
pbuf_odd = (uchar *)(ATA_CURR_BASE(dev)+ATA_DATA_ODD);
while (shorts--) {
- __asm__ volatile ("eieio");
+ EIEIO;
*dbuf++ = *pbuf_even;
- __asm__ volatile ("eieio");
+ EIEIO;
*dbuf++ = *pbuf_odd;
}
#endif /* CONFIG_HMI10 */
}
}
-// ----------------------------------------------------------------
+/* ---------------------------------------------------------------- */
int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
char op;
usb, 5, 1, do_usb,
"usb - USB sub-system\n",
"reset - reset (rescan) USB controller\n"
- "usb stop [f] - stop USB [f]=force stop\n"
- "usb tree - show USB device tree\n"
- "usb info [dev] - show available USB devices\n"
- "usb scan - (re-)scan USB bus for storage devices\n"
- "usb device [dev] - show or set current USB storage device\n"
- "usb part [dev] - print partition table of one or all USB storage devices\n"
- "usb read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n"
- " to memory address `addr'\n"
+ "usb stop [f] - stop USB [f]=force stop\n"
+ "usb tree - show USB device tree\n"
+ "usb info [dev] - show available USB devices\n"
+ "usb scan - (re-)scan USB bus for storage devices\n"
+ "usb device [dev] - show or set current USB storage device\n"
+ "usb part [dev] - print partition table of one or all USB storage devices\n"
+ "usb read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n"
+ " to memory address `addr'\n"
);
int inputcnt = strlen (input);
int outputcnt = CFG_CBSIZE;
int state = 0; /* 0 = waiting for '$' */
- /* 1 = waiting for '(' */
- /* 2 = waiting for ')' */
+ /* 1 = waiting for '(' or '{' */
+ /* 2 = waiting for ')' or '}' */
/* 3 = waiting for ''' */
#ifdef DEBUG_PARSER
char *output_start = output;
}
break;
case 1: /* Waiting for ( */
- if (c == '(') {
+ if (c == '(' || c == '{') {
state++;
varname_start = input;
} else {
}
break;
case 2: /* Waiting for ) */
- if (c == ')') {
+ if (c == ')' || c == '}') {
int i;
char envname[CFG_CBSIZE], *envval;
int envcnt = input-varname_start-1; /* Varname # of chars */
rtl8019.o rtl8139.o rtl8169.o \
s3c24x0_i2c.o sed13806.o sed156x.o \
serial.o serial_max3100.o serial_pl010.o serial_pl011.o \
- serial_xuartlite.o \
+ serial_xuartlite.o sl811_usb.o \
smc91111.o smiLynxEM.o status_led.o sym53c8xx.o \
ti_pci1410a.o tigon3.o w83c553f.o omap1510_i2c.o \
usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \
--- /dev/null
+#ifndef __UBOOT_SL811_H
+#define __UBOOT_SL811_H
+
+#undef SL811_DEBUG
+
+#ifdef SL811_DEBUG
+ #define PDEBUG(level, fmt, args...) \
+ if (debug >= (level)) printf("[%s:%d] " fmt, \
+ __PRETTY_FUNCTION__, __LINE__ , ## args)
+#else
+ #define PDEBUG(level, fmt, args...) do {} while(0)
+#endif
+
+/* Sl811 host control register */
+#define SL811_CTRL_A 0x00
+#define SL811_ADDR_A 0x01
+#define SL811_LEN_A 0x02
+#define SL811_STS_A 0x03 /* read */
+#define SL811_PIDEP_A 0x03 /* write */
+#define SL811_CNT_A 0x04 /* read */
+#define SL811_DEV_A 0x04 /* write */
+#define SL811_CTRL1 0x05
+#define SL811_INTR 0x06
+#define SL811_CTRL_B 0x08
+#define SL811_ADDR_B 0x09
+#define SL811_LEN_B 0x0A
+#define SL811_STS_B 0x0B /* read */
+#define SL811_PIDEP_B 0x0B /* write */
+#define SL811_CNT_B 0x0C /* read */
+#define SL811_DEV_B 0x0C /* write */
+#define SL811_INTRSTS 0x0D /* write clears bitwise */
+#define SL811_HWREV 0x0E /* read */
+#define SL811_SOFLOW 0x0E /* write */
+#define SL811_SOFCNTDIV 0x0F /* read */
+#define SL811_CTRL2 0x0F /* write */
+
+/* USB control register bits (addr 0x00 and addr 0x08) */
+#define SL811_USB_CTRL_ARM 0x01
+#define SL811_USB_CTRL_ENABLE 0x02
+#define SL811_USB_CTRL_DIR_OUT 0x04
+#define SL811_USB_CTRL_ISO 0x10
+#define SL811_USB_CTRL_SOF 0x20
+#define SL811_USB_CTRL_TOGGLE_1 0x40
+#define SL811_USB_CTRL_PREAMBLE 0x80
+
+/* USB status register bits (addr 0x03 and addr 0x0B) */
+#define SL811_USB_STS_ACK 0x01
+#define SL811_USB_STS_ERROR 0x02
+#define SL811_USB_STS_TIMEOUT 0x04
+#define SL811_USB_STS_TOGGLE_1 0x08
+#define SL811_USB_STS_SETUP 0x10
+#define SL811_USB_STS_OVERFLOW 0x20
+#define SL811_USB_STS_NAK 0x40
+#define SL811_USB_STS_STALL 0x80
+
+/* Control register 1 bits (addr 0x05) */
+#define SL811_CTRL1_SOF 0x01
+#define SL811_CTRL1_RESET 0x08
+#define SL811_CTRL1_JKSTATE 0x10
+#define SL811_CTRL1_SPEED_LOW 0x20
+#define SL811_CTRL1_SUSPEND 0x40
+
+/* Interrut enable (addr 0x06) and interrupt status register bits (addr 0x0D) */
+#define SL811_INTR_DONE_A 0x01
+#define SL811_INTR_DONE_B 0x02
+#define SL811_INTR_SOF 0x10
+#define SL811_INTR_INSRMV 0x20
+#define SL811_INTR_DETECT 0x40
+#define SL811_INTR_NOTPRESENT 0x40
+#define SL811_INTR_SPEED_FULL 0x80 /* only in status reg */
+
+/* HW rev and SOF lo register bits (addr 0x0E) */
+#define SL811_HWR_HWREV 0xF0
+
+/* SOF counter and control reg 2 (addr 0x0F) */
+#define SL811_CTL2_SOFHI 0x3F
+#define SL811_CTL2_DSWAP 0x40
+#define SL811_CTL2_HOST 0x80
+
+/* Set up for 1-ms SOF time. */
+#define SL811_12M_LOW 0xE0
+#define SL811_12M_HI 0x2E
+
+#define SL811_DATA_START 0x10
+#define SL811_DATA_LIMIT 240
+
+/* Requests: bRequest << 8 | bmRequestType */
+#define RH_GET_STATUS 0x0080
+#define RH_CLEAR_FEATURE 0x0100
+#define RH_SET_FEATURE 0x0300
+#define RH_SET_ADDRESS 0x0500
+#define RH_GET_DESCRIPTOR 0x0680
+#define RH_SET_DESCRIPTOR 0x0700
+#define RH_GET_CONFIGURATION 0x0880
+#define RH_SET_CONFIGURATION 0x0900
+#define RH_GET_STATE 0x0280
+#define RH_GET_INTERFACE 0x0A80
+#define RH_SET_INTERFACE 0x0B00
+#define RH_SYNC_FRAME 0x0C80
+
+
+#define PIDEP(pid, ep) (((pid) & 0x0f) << 4 | (ep))
+
+#endif /* __UBOOT_SL811_H */
--- /dev/null
+/*
+ * (C) Copyright 2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This code is based on linux driver for sl811hs chip, source at
+ * drivers/usb/host/sl811.c:
+ *
+ * SL811 Host Controller Interface driver for USB.
+ *
+ * Copyright (c) 2003/06, Courage Co., Ltd.
+ *
+ * Based on:
+ * 1.uhci.c by Linus Torvalds, Johannes Erdfelt, Randy Dunlap,
+ * Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber,
+ * Adam Richter, Gregory P. Smith;
+ * 2.Original SL811 driver (hc_sl811.o) by Pei Liu <pbl@cypress.com>
+ * 3.Rewrited as sl811.o by Yin Aihua <yinah:couragetech.com.cn>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#ifdef CONFIG_USB_SL811HS
+#include <mpc8xx.h>
+#include <usb.h>
+#include "sl811.h"
+
+#include "../board/kup/common/kup.h"
+
+#ifdef __PPC__
+# define EIEIO __asm__ volatile ("eieio")
+#else
+# define EIEIO /* nothing */
+#endif
+
+#define SL811_ADR (0x50000000)
+#define SL811_DAT (0x50000001)
+
+#define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);})
+
+#ifdef SL811_DEBUG
+static int debug = 9;
+#endif
+
+static int root_hub_devnum = 0;
+static struct usb_port_status rh_status = { 0 };/* root hub port status */
+
+static int sl811_rh_submit_urb(struct usb_device *usb_dev, unsigned long pipe,
+ void *data, int buf_len, struct devrequest *cmd);
+
+static void sl811_write (__u8 index, __u8 data)
+{
+ *(volatile unsigned char *) (SL811_ADR) = index;
+ EIEIO;
+ *(volatile unsigned char *) (SL811_DAT) = data;
+ EIEIO;
+}
+
+static __u8 sl811_read (__u8 index)
+{
+ __u8 data;
+
+ *(volatile unsigned char *) (SL811_ADR) = index;
+ EIEIO;
+ data = *(volatile unsigned char *) (SL811_DAT);
+ EIEIO;
+ return (data);
+}
+
+/*
+ * Read consecutive bytes of data from the SL811H/SL11H buffer
+ */
+static void inline sl811_read_buf(__u8 offset, __u8 *buf, __u8 size)
+{
+ *(volatile unsigned char *) (SL811_ADR) = offset;
+ EIEIO;
+ while (size--) {
+ *buf++ = *(volatile unsigned char *) (SL811_DAT);
+ EIEIO;
+ }
+}
+
+/*
+ * Write consecutive bytes of data to the SL811H/SL11H buffer
+ */
+static void inline sl811_write_buf(__u8 offset, __u8 *buf, __u8 size)
+{
+ *(volatile unsigned char *) (SL811_ADR) = offset;
+ EIEIO;
+ while (size--) {
+ *(volatile unsigned char *) (SL811_DAT) = *buf++;
+ EIEIO;
+ }
+}
+
+int usb_init_kup4x (void)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ int i;
+ unsigned char tmp;
+
+ memctl = &immap->im_memctl;
+ memctl->memc_or7 = 0xFFFF8726;
+ memctl->memc_br7 = 0x50000401; /* start at 0x50000000 */
+ /* BP 14 low = USB ON */
+ immap->im_cpm.cp_pbdat &= ~(BP_USB_VCC);
+ /* PB 14 nomal port */
+ immap->im_cpm.cp_pbpar &= ~(BP_USB_VCC);
+ /* output */
+ immap->im_cpm.cp_pbdir |= (BP_USB_VCC);
+
+ puts ("USB: ");
+
+ for (i = 0x10; i < 0xff; i++) {
+ sl811_write(i, i);
+ tmp = (sl811_read(i));
+ if (tmp != i) {
+ printf ("SL811 compare error index=0x%02x read=0x%02x\n", i, tmp);
+ return (-1);
+ }
+ }
+ printf ("SL811 ready\n");
+ return (0);
+}
+
+/*
+ * This function resets SL811HS controller and detects the speed of
+ * the connecting device
+ *
+ * Return: 0 = no device attached; 1 = USB device attached
+ */
+static int sl811_hc_reset(void)
+{
+ int status ;
+
+ sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_12M_HI);
+ sl811_write(SL811_CTRL1, SL811_CTRL1_RESET);
+
+ mdelay(20);
+
+ /* Disable hardware SOF generation, clear all irq status. */
+ sl811_write(SL811_CTRL1, 0);
+ mdelay(2);
+ sl811_write(SL811_INTRSTS, 0xff);
+ status = sl811_read(SL811_INTRSTS);
+
+ if (status & SL811_INTR_NOTPRESENT) {
+ /* Device is not present */
+ PDEBUG(0, "Device not present\n");
+ rh_status.wPortStatus &= ~(USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE);
+ rh_status.wPortChange |= USB_PORT_STAT_C_CONNECTION;
+ sl811_write(SL811_INTR, SL811_INTR_INSRMV);
+ return 0;
+ }
+
+ /* Send SOF to address 0, endpoint 0. */
+ sl811_write(SL811_LEN_B, 0);
+ sl811_write(SL811_PIDEP_B, PIDEP(USB_PID_SOF, 0));
+ sl811_write(SL811_DEV_B, 0x00);
+ sl811_write(SL811_SOFLOW, SL811_12M_LOW);
+
+ if (status & SL811_INTR_SPEED_FULL) {
+ /* full speed device connect directly to root hub */
+ PDEBUG (0, "Full speed Device attached\n");
+
+ sl811_write(SL811_CTRL1, SL811_CTRL1_RESET);
+ mdelay(20);
+ sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_12M_HI);
+ sl811_write(SL811_CTRL1, SL811_CTRL1_SOF);
+
+ /* start the SOF or EOP */
+ sl811_write(SL811_CTRL_B, SL811_USB_CTRL_ARM);
+ rh_status.wPortStatus |= USB_PORT_STAT_CONNECTION;
+ rh_status.wPortStatus &= ~USB_PORT_STAT_LOW_SPEED;
+ mdelay(2);
+ sl811_write(SL811_INTRSTS, 0xff);
+ } else {
+ /* slow speed device connect directly to root-hub */
+ PDEBUG(0, "Low speed Device attached\n");
+
+ sl811_write(SL811_CTRL1, SL811_CTRL1_RESET);
+ mdelay(20);
+ sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_CTL2_DSWAP | SL811_12M_HI);
+ sl811_write(SL811_CTRL1, SL811_CTRL1_SPEED_LOW | SL811_CTRL1_SOF);
+
+ /* start the SOF or EOP */
+ sl811_write(SL811_CTRL_B, SL811_USB_CTRL_ARM);
+ rh_status.wPortStatus |= USB_PORT_STAT_CONNECTION | USB_PORT_STAT_LOW_SPEED;
+ mdelay(2);
+ sl811_write(SL811_INTRSTS, 0xff);
+ }
+
+ rh_status.wPortChange |= USB_PORT_STAT_C_CONNECTION;
+ sl811_write(SL811_INTR, /*SL811_INTR_INSRMV*/SL811_INTR_DONE_A);
+
+ return 1;
+}
+
+int usb_lowlevel_init(void)
+{
+ root_hub_devnum = 0;
+ sl811_hc_reset();
+ return 0;
+}
+
+int usb_lowlevel_stop(void)
+{
+ sl811_hc_reset();
+ return 0;
+}
+
+int sl811_send_packet(int dir_to_host, int data1, __u8 *buffer, int len)
+{
+ __u8 ctrl = SL811_USB_CTRL_ARM | SL811_USB_CTRL_ENABLE;
+ __u16 status;
+ int err = 0;
+
+ if (len > 239)
+ return -1;
+
+ if (!dir_to_host)
+ ctrl |= SL811_USB_CTRL_DIR_OUT;
+ if (data1)
+ ctrl |= SL811_USB_CTRL_TOGGLE_1;
+
+ sl811_write(SL811_ADDR_A, 0x10);
+ sl811_write(SL811_LEN_A, len);
+ if (!dir_to_host && len)
+ sl811_write_buf(0x10, buffer, len);
+
+ while (err < 3) {
+ if (sl811_read(SL811_SOFCNTDIV)*64 < len * 8 * 2)
+ ctrl |= SL811_USB_CTRL_SOF;
+ else
+ ctrl &= ~SL811_USB_CTRL_SOF;
+ sl811_write(SL811_CTRL_A, ctrl);
+ while (!(sl811_read(SL811_INTRSTS) & SL811_INTR_DONE_A))
+ ; /* do nothing */
+
+ sl811_write(SL811_INTRSTS, 0xff);
+ status = sl811_read(SL811_STS_A);
+
+ if (status & SL811_USB_STS_ACK) {
+ int remainder = sl811_read(SL811_CNT_A);
+ if (remainder) {
+ PDEBUG(0, "usb transfer remainder = %d\n", remainder);
+ len -= remainder;
+ }
+ if (dir_to_host && len)
+ sl811_read_buf(0x10, buffer, len);
+ return len;
+ }
+
+ if ((status & SL811_USB_STS_NAK) == SL811_USB_STS_NAK)
+ continue;
+
+ PDEBUG(0, "usb transfer error %#x\n", (int)status);
+ err++;
+ }
+
+ return -1;
+}
+
+int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int len)
+{
+ int dir_out = usb_pipeout(pipe);
+ int ep = usb_pipeendpoint(pipe);
+ __u8* buf = (__u8*)buffer;
+ int max = usb_maxpacket(dev, pipe);
+ int done = 0;
+
+ PDEBUG(7, "dev = %ld pipe = %ld buf = %p size = %d dir_out = %d\n",
+ usb_pipedevice(pipe), usb_pipeendpoint(pipe), buffer, len, dir_out);
+
+ dev->status = 0;
+
+ sl811_write(SL811_DEV_A, usb_pipedevice(pipe));
+ sl811_write(SL811_PIDEP_A, PIDEP(!dir_out ? USB_PID_IN : USB_PID_OUT, ep));
+ while (done < len) {
+ int res = sl811_send_packet(!dir_out, usb_gettoggle(dev, ep, dir_out),
+ buf+done,
+ max > len - done ? len - done : max);
+ if (res < 0) {
+ dev->status = res;
+ return res;
+ }
+
+ if (!dir_out && res < max) /* short packet */
+ break;
+
+ done += res;
+ usb_dotoggle(dev, ep, dir_out);
+ }
+
+ dev->act_len = done;
+
+ return 0;
+}
+
+int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int len,struct devrequest *setup)
+{
+ int done = 0;
+ int devnum = usb_pipedevice(pipe);
+
+ dev->status = 0;
+
+ if (devnum == root_hub_devnum)
+ return sl811_rh_submit_urb(dev, pipe, buffer, len, setup);
+
+ PDEBUG(7, "dev = %d pipe = %ld buf = %p size = %d rt = %#x req = %#x\n",
+ devnum, usb_pipeendpoint(pipe), buffer, len, (int)setup->requesttype,
+ (int)setup->request);
+
+ sl811_write(SL811_DEV_A, devnum);
+ sl811_write(SL811_PIDEP_A, PIDEP(USB_PID_SETUP, 0));
+ /* setup phase */
+ if (sl811_send_packet(0, 0, (__u8*)setup, sizeof(*setup)) == sizeof(*setup)) {
+ int dir_in = setup->requesttype & USB_DIR_IN;
+ __u8* buf = (__u8*)buffer;
+ int data1 = 1;
+ int max = usb_maxpacket(dev, pipe);
+
+ /* data phase */
+ sl811_write(SL811_PIDEP_A,
+ PIDEP(dir_in ? USB_PID_IN : USB_PID_OUT, 0));
+ while (done < len) {
+ int res = sl811_send_packet(dir_in, data1, buf+done,
+ max > len - done ? len - done : max);
+ if (res < 0)
+ return res;
+ done += res;
+
+ if (dir_in && res < max) /* short packet */
+ break;
+
+ data1 = !data1;
+ }
+
+ /* status phase */
+ sl811_write(SL811_PIDEP_A,
+ PIDEP(!dir_in ? USB_PID_IN : USB_PID_OUT, 0));
+ if (sl811_send_packet(!dir_in, 1, 0, 0) < 0) {
+ PDEBUG(0, "status phase failed!\n");
+ dev->status = -1;
+ }
+ } else {
+ PDEBUG(0, "setup phase failed!\n");
+ dev->status = -1;
+ }
+
+ dev->act_len = done;
+
+ return done;
+}
+
+int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int len, int interval)
+{
+ PDEBUG(7, "dev = %p pipe = %#lx buf = %p size = %d int = %d\n", dev, pipe,
+ buffer, len, interval);
+ return -1;
+}
+
+/*
+ * SL811 Virtual Root Hub
+ */
+
+/* Device descriptor */
+static __u8 sl811_rh_dev_des[] =
+{
+ 0x12, /* __u8 bLength; */
+ 0x01, /* __u8 bDescriptorType; Device */
+ 0x10, /* __u16 bcdUSB; v1.1 */
+ 0x01,
+ 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 bDeviceSubClass; */
+ 0x00, /* __u8 bDeviceProtocol; */
+ 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
+ 0x00, /* __u16 idVendor; */
+ 0x00,
+ 0x00, /* __u16 idProduct; */
+ 0x00,
+ 0x00, /* __u16 bcdDevice; */
+ 0x00,
+ 0x00, /* __u8 iManufacturer; */
+ 0x02, /* __u8 iProduct; */
+ 0x01, /* __u8 iSerialNumber; */
+ 0x01 /* __u8 bNumConfigurations; */
+};
+
+/* Configuration descriptor */
+static __u8 sl811_rh_config_des[] =
+{
+ 0x09, /* __u8 bLength; */
+ 0x02, /* __u8 bDescriptorType; Configuration */
+ 0x19, /* __u16 wTotalLength; */
+ 0x00,
+ 0x01, /* __u8 bNumInterfaces; */
+ 0x01, /* __u8 bConfigurationValue; */
+ 0x00, /* __u8 iConfiguration; */
+ 0x40, /* __u8 bmAttributes;
+ Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup,
+ 4..0: resvd */
+ 0x00, /* __u8 MaxPower; */
+
+ /* interface */
+ 0x09, /* __u8 if_bLength; */
+ 0x04, /* __u8 if_bDescriptorType; Interface */
+ 0x00, /* __u8 if_bInterfaceNumber; */
+ 0x00, /* __u8 if_bAlternateSetting; */
+ 0x01, /* __u8 if_bNumEndpoints; */
+ 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 if_bInterfaceSubClass; */
+ 0x00, /* __u8 if_bInterfaceProtocol; */
+ 0x00, /* __u8 if_iInterface; */
+
+ /* endpoint */
+ 0x07, /* __u8 ep_bLength; */
+ 0x05, /* __u8 ep_bDescriptorType; Endpoint */
+ 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
+ 0x03, /* __u8 ep_bmAttributes; Interrupt */
+ 0x08, /* __u16 ep_wMaxPacketSize; */
+ 0x00,
+ 0xff /* __u8 ep_bInterval; 255 ms */
+};
+
+/* root hub class descriptor*/
+static __u8 sl811_rh_hub_des[] =
+{
+ 0x09, /* __u8 bLength; */
+ 0x29, /* __u8 bDescriptorType; Hub-descriptor */
+ 0x01, /* __u8 bNbrPorts; */
+ 0x00, /* __u16 wHubCharacteristics; */
+ 0x00,
+ 0x50, /* __u8 bPwrOn2pwrGood; 2ms */
+ 0x00, /* __u8 bHubContrCurrent; 0 mA */
+ 0xfc, /* __u8 DeviceRemovable; *** 7 Ports max *** */
+ 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */
+};
+
+/*
+ * helper routine for returning string descriptors in UTF-16LE
+ * input can actually be ISO-8859-1; ASCII is its 7-bit subset
+ */
+static int ascii2utf (char *s, u8 *utf, int utfmax)
+{
+ int retval;
+
+ for (retval = 0; *s && utfmax > 1; utfmax -= 2, retval += 2) {
+ *utf++ = *s++;
+ *utf++ = 0;
+ }
+ return retval;
+}
+
+/*
+ * root_hub_string is used by each host controller's root hub code,
+ * so that they're identified consistently throughout the system.
+ */
+int usb_root_hub_string (int id, int serial, char *type, __u8 *data, int len)
+{
+ char buf [30];
+
+ /* assert (len > (2 * (sizeof (buf) + 1)));
+ assert (strlen (type) <= 8);*/
+
+ /* language ids */
+ if (id == 0) {
+ *data++ = 4; *data++ = 3; /* 4 bytes data */
+ *data++ = 0; *data++ = 0; /* some language id */
+ return 4;
+
+ /* serial number */
+ } else if (id == 1) {
+ sprintf (buf, "%x", serial);
+
+ /* product description */
+ } else if (id == 2) {
+ sprintf (buf, "USB %s Root Hub", type);
+
+ /* id 3 == vendor description */
+
+ /* unsupported IDs --> "stall" */
+ } else
+ return 0;
+
+ data [0] = 2 + ascii2utf (buf, data + 2, len - 2);
+ data [1] = 3;
+ return data [0];
+}
+
+/* helper macro */
+#define OK(x) len = (x); break
+
+/*
+ * This function handles all USB request to the the virtual root hub
+ */
+static int sl811_rh_submit_urb(struct usb_device *usb_dev, unsigned long pipe,
+ void *data, int buf_len, struct devrequest *cmd)
+{
+ __u8 data_buf[16];
+ __u8 *bufp = data_buf;
+ int len = 0;
+ int status = 0;
+
+ __u16 bmRType_bReq;
+ __u16 wValue;
+ __u16 wIndex;
+ __u16 wLength;
+
+ if (usb_pipeint(pipe)) {
+ PDEBUG(0, "interrupt transfer unimplemented!\n");
+ return 0;
+ }
+
+ bmRType_bReq = cmd->requesttype | (cmd->request << 8);
+ wValue = le16_to_cpu (cmd->value);
+ wIndex = le16_to_cpu (cmd->index);
+ wLength = le16_to_cpu (cmd->length);
+
+ PDEBUG(5, "submit rh urb, req = %d(%x) val = %#x index = %#x len=%d\n",
+ bmRType_bReq, bmRType_bReq, wValue, wIndex, wLength);
+
+ /* Request Destination:
+ without flags: Device,
+ USB_RECIP_INTERFACE: interface,
+ USB_RECIP_ENDPOINT: endpoint,
+ USB_TYPE_CLASS means HUB here,
+ USB_RECIP_OTHER | USB_TYPE_CLASS almost ever means HUB_PORT here
+ */
+ switch (bmRType_bReq) {
+ case RH_GET_STATUS:
+ *(__u16 *)bufp = cpu_to_le16(1);
+ OK(2);
+
+ case RH_GET_STATUS | USB_RECIP_INTERFACE:
+ *(__u16 *)bufp = cpu_to_le16(0);
+ OK(2);
+
+ case RH_GET_STATUS | USB_RECIP_ENDPOINT:
+ *(__u16 *)bufp = cpu_to_le16(0);
+ OK(2);
+
+ case RH_GET_STATUS | USB_TYPE_CLASS:
+ *(__u32 *)bufp = cpu_to_le32(0);
+ OK(4);
+
+ case RH_GET_STATUS | USB_RECIP_OTHER | USB_TYPE_CLASS:
+ *(__u32 *)bufp = cpu_to_le32(rh_status.wPortChange<<16 | rh_status.wPortStatus);
+ OK(4);
+
+ case RH_CLEAR_FEATURE | USB_RECIP_ENDPOINT:
+ switch (wValue) {
+ case 1:
+ OK(0);
+ }
+ break;
+
+ case RH_CLEAR_FEATURE | USB_TYPE_CLASS:
+ switch (wValue) {
+ case C_HUB_LOCAL_POWER:
+ OK(0);
+
+ case C_HUB_OVER_CURRENT:
+ OK(0);
+ }
+ break;
+
+ case RH_CLEAR_FEATURE | USB_RECIP_OTHER | USB_TYPE_CLASS:
+ switch (wValue) {
+ case USB_PORT_FEAT_ENABLE:
+ rh_status.wPortStatus &= ~USB_PORT_STAT_ENABLE;
+ OK(0);
+
+ case USB_PORT_FEAT_SUSPEND:
+ rh_status.wPortStatus &= ~USB_PORT_STAT_SUSPEND;
+ OK(0);
+
+ case USB_PORT_FEAT_POWER:
+ rh_status.wPortStatus &= ~USB_PORT_STAT_POWER;
+ OK(0);
+
+ case USB_PORT_FEAT_C_CONNECTION:
+ rh_status.wPortChange &= ~USB_PORT_STAT_C_CONNECTION;
+ OK(0);
+
+ case USB_PORT_FEAT_C_ENABLE:
+ rh_status.wPortChange &= ~USB_PORT_STAT_C_ENABLE;
+ OK(0);
+
+ case USB_PORT_FEAT_C_SUSPEND:
+ rh_status.wPortChange &= ~USB_PORT_STAT_C_SUSPEND;
+ OK(0);
+
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ rh_status.wPortChange &= ~USB_PORT_STAT_C_OVERCURRENT;
+ OK(0);
+
+ case USB_PORT_FEAT_C_RESET:
+ rh_status.wPortChange &= ~USB_PORT_STAT_C_RESET;
+ OK(0);
+ }
+ break;
+
+ case RH_SET_FEATURE | USB_RECIP_OTHER | USB_TYPE_CLASS:
+ switch (wValue) {
+ case USB_PORT_FEAT_SUSPEND:
+ rh_status.wPortStatus |= USB_PORT_STAT_SUSPEND;
+ OK(0);
+
+ case USB_PORT_FEAT_RESET:
+ rh_status.wPortStatus |= USB_PORT_STAT_RESET;
+ rh_status.wPortChange = 0;
+ rh_status.wPortChange |= USB_PORT_STAT_C_RESET;
+ rh_status.wPortStatus &= ~USB_PORT_STAT_RESET;
+ rh_status.wPortStatus |= USB_PORT_STAT_ENABLE;
+ OK(0);
+
+ case USB_PORT_FEAT_POWER:
+ rh_status.wPortStatus |= USB_PORT_STAT_POWER;
+ OK(0);
+
+ case USB_PORT_FEAT_ENABLE:
+ rh_status.wPortStatus |= USB_PORT_STAT_ENABLE;
+ OK(0);
+ }
+ break;
+
+ case RH_SET_ADDRESS:
+ root_hub_devnum = wValue;
+ OK(0);
+
+ case RH_GET_DESCRIPTOR:
+ switch ((wValue & 0xff00) >> 8) {
+ case USB_DT_DEVICE:
+ len = sizeof(sl811_rh_dev_des);
+ bufp = sl811_rh_dev_des;
+ OK(len);
+
+ case USB_DT_CONFIG:
+ len = sizeof(sl811_rh_config_des);
+ bufp = sl811_rh_config_des;
+ OK(len);
+
+ case USB_DT_STRING:
+ len = usb_root_hub_string(wValue & 0xff, (int)(long)0, "SL811HS", data, wLength);
+ if (len > 0) {
+ bufp = data;
+ OK(len);
+ }
+
+ default:
+ status = -32;
+ }
+ break;
+
+ case RH_GET_DESCRIPTOR | USB_TYPE_CLASS:
+ len = sizeof(sl811_rh_hub_des);
+ bufp = sl811_rh_hub_des;
+ OK(len);
+
+ case RH_GET_CONFIGURATION:
+ bufp[0] = 0x01;
+ OK(1);
+
+ case RH_SET_CONFIGURATION:
+ OK(0);
+
+ default:
+ PDEBUG(1, "unsupported root hub command\n");
+ status = -32;
+ }
+
+ len = min(len, buf_len);
+ if (data != bufp)
+ memcpy(data, bufp, len);
+
+ PDEBUG(5, "len = %d, status = %d\n", len, status);
+
+ usb_dev->status = status;
+ usb_dev->act_len = len;
+
+ return status == 0 ? len : status;
+}
+
+#endif /* CONFIG_USB_SL811HS */
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_DHCP | \
CFG_CMD_I2C | \
- CFG_CMD_IDE )
+ CFG_CMD_IDE | \
+ CFG_CMD_USB | \
+ CFG_CMD_FAT)
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
#define CONFIG_AUTOBOOT_STOP_STR "." /* easy to stop for now */
#define CONFIG_SILENT_CONSOLE 1
+#define CONFIG_USB_STORAGE 1
+#define CONFIG_USB_SL811HS 1
+
#endif /* __CONFIG_H */
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
"tftpboot; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
- "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
"bootm"
#define CONFIG_AUTOSCRIPT
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
"tftpboot; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
- "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
"bootm"
#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
"tftpboot; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
- "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
"bootm"
#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
#ifndef _FAT_H_
#define _FAT_H_
+#include <asm/byteorder.h>
+
#define CONFIG_SUPPORT_VFAT
#define SECTOR_SIZE FS_BLOCK_SIZE
const char *file_getfsname(int idx);
int fat_register_device(block_dev_desc_t *dev_desc, int part_no);
-#ifdef CONFIG_PXA250
-#undef FAT2CPU16
-#define FAT2CPU16(x) x
-#undef FAT2CPU32
-#define FAT2CPU32(x) x
-#endif
-
#endif /* _FAT_H_ */
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
#include <usb_defs.h>
/* Everything is aribtrary */
-#define USB_ALTSETTINGALLOC 4
-#define USB_MAXALTSETTING 128 /* Hard limit */
+#define USB_ALTSETTINGALLOC 4
+#define USB_MAXALTSETTING 128 /* Hard limit */
-#define USB_MAX_DEVICE 32
-#define USB_MAXCONFIG 8
-#define USB_MAXINTERFACES 8
-#define USB_MAXENDPOINTS 16
-#define USB_MAXCHILDREN 8 /* This is arbitrary */
-#define USB_MAX_HUB 16
+#define USB_MAX_DEVICE 32
+#define USB_MAXCONFIG 8
+#define USB_MAXINTERFACES 8
+#define USB_MAXENDPOINTS 16
+#define USB_MAXCHILDREN 8 /* This is arbitrary */
+#define USB_MAX_HUB 16
#define USB_CNTL_TIMEOUT 100 /* 100ms timeout */
unsigned char bmAttributes;
unsigned char MaxPower;
- unsigned char no_of_if; /* number of interfaces */
+ unsigned char no_of_if; /* number of interfaces */
struct usb_interface_descriptor if_desc[USB_MAXINTERFACES];
} __attribute__ ((packed));
struct usb_device {
- int devnum; /* Device number on USB bus */
- int slow; /* Slow device? */
- char mf[32]; /* manufacturer */
- char prod[32]; /* product */
- char serial[32]; /* serial number */
+ int devnum; /* Device number on USB bus */
+ int slow; /* Slow device? */
+ char mf[32]; /* manufacturer */
+ char prod[32]; /* product */
+ char serial[32]; /* serial number */
- int maxpacketsize; /* Maximum packet size; encoded as 0,1,2,3 = 8,16,32,64 */
+ int maxpacketsize; /* Maximum packet size; encoded as 0,1,2,3 = 8,16,32,64 */
unsigned int toggle[2]; /* one bit for each endpoint ([0] = IN, [1] = OUT) */
unsigned int halted[2]; /* endpoint halts; one bit per endpoint # & direction; */
/* [0] = IN, [1] = OUT */
int string_langid; /* language ID for strings */
int (*irq_handle)(struct usb_device *dev);
unsigned long irq_status;
- int irq_act_len; /* transfered bytes */
+ int irq_act_len; /* transfered bytes */
void *privptr;
/*
* Child devices - if this is a hub device
* this is how the lowlevel part communicate with the outer world
*/
-#if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI)
+#if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || defined (CONFIG_USB_SL811HS)
int usb_lowlevel_init(void);
int usb_lowlevel_stop(void);
int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len);
/* Defines */
#define USB_UHCI_VEND_ID 0x8086
-#define USB_UHCI_DEV_ID 0x7112
+#define USB_UHCI_DEV_ID 0x7112
#else
#error USB Lowlevel not defined
({ unsigned long x_ = (unsigned long)x; \
(unsigned long)( \
((x_ & 0x000000FFUL) << 24) | \
- ((x_ & 0x0000FF00UL) << 8) | \
- ((x_ & 0x00FF0000UL) >> 8) | \
+ ((x_ & 0x0000FF00UL) << 8) | \
+ ((x_ & 0x00FF0000UL) >> 8) | \
((x_ & 0xFF000000UL) >> 24) ); \
})
#endif /* LITTLEENDIAN */
/* The D0/D1 toggle bits */
#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> ep) & 1)
-#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << ep))
+#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << ep))
#define usb_settoggle(dev, ep, out, bit) ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << ep)) | ((bit) << ep))
/* Endpoint halt control/status */
projects / u-boot / commitdiff