For SPL builds this is just dead code since we'll only need to read.
Eliminating it results in a significant size reduction for the SPL
binary, which may be critical for certain platforms where the binary
size is highly constrained.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
COBJS-$(CONFIG_ZYNQ_SDHCI) += zynq_sdhci.o
ifdef CONFIG_SPL_BUILD
COBJS-$(CONFIG_SPL_MMC_BOOT) += fsl_esdhc_spl.o
+else
+COBJS-$(CONFIG_GENERIC_MMC) += mmc_write.o
endif
COBJS := $(COBJS-y)
#include <malloc.h>
#include <linux/list.h>
#include <div64.h>
+#include "mmc_private.h"
/* Set block count limit because of 16 bit register limit on some hardware*/
#ifndef CONFIG_SYS_MMC_MAX_BLK_COUNT
int board_mmc_getcd(struct mmc *mmc)__attribute__((weak,
alias("__board_mmc_getcd")));
-static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
- struct mmc_data *data)
+int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
{
int ret;
return ret;
}
-static int mmc_send_status(struct mmc *mmc, int timeout)
+int mmc_send_status(struct mmc *mmc, int timeout)
{
struct mmc_cmd cmd;
int err, retries = 5;
return 0;
}
-static int mmc_set_blocklen(struct mmc *mmc, int len)
+int mmc_set_blocklen(struct mmc *mmc, int len)
{
struct mmc_cmd cmd;
return NULL;
}
-static ulong mmc_erase_t(struct mmc *mmc, ulong start, lbaint_t blkcnt)
-{
- struct mmc_cmd cmd;
- ulong end;
- int err, start_cmd, end_cmd;
-
- if (mmc->high_capacity)
- end = start + blkcnt - 1;
- else {
- end = (start + blkcnt - 1) * mmc->write_bl_len;
- start *= mmc->write_bl_len;
- }
-
- if (IS_SD(mmc)) {
- start_cmd = SD_CMD_ERASE_WR_BLK_START;
- end_cmd = SD_CMD_ERASE_WR_BLK_END;
- } else {
- start_cmd = MMC_CMD_ERASE_GROUP_START;
- end_cmd = MMC_CMD_ERASE_GROUP_END;
- }
-
- cmd.cmdidx = start_cmd;
- cmd.cmdarg = start;
- cmd.resp_type = MMC_RSP_R1;
-
- err = mmc_send_cmd(mmc, &cmd, NULL);
- if (err)
- goto err_out;
-
- cmd.cmdidx = end_cmd;
- cmd.cmdarg = end;
-
- err = mmc_send_cmd(mmc, &cmd, NULL);
- if (err)
- goto err_out;
-
- cmd.cmdidx = MMC_CMD_ERASE;
- cmd.cmdarg = SECURE_ERASE;
- cmd.resp_type = MMC_RSP_R1b;
-
- err = mmc_send_cmd(mmc, &cmd, NULL);
- if (err)
- goto err_out;
-
- return 0;
-
-err_out:
-#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
- puts("mmc erase failed\n");
-#endif
- return err;
-}
-
-static unsigned long
-mmc_berase(int dev_num, lbaint_t start, lbaint_t blkcnt)
-{
- int err = 0;
- struct mmc *mmc = find_mmc_device(dev_num);
- lbaint_t blk = 0, blk_r = 0;
- int timeout = 1000;
-
- if (!mmc)
- return -1;
-
-#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
- if ((start % mmc->erase_grp_size) || (blkcnt % mmc->erase_grp_size))
- printf("\n\nCaution! Your devices Erase group is 0x%x\n"
- "The erase range would be change to "
- "0x" LBAF "~0x" LBAF "\n\n",
- mmc->erase_grp_size, start & ~(mmc->erase_grp_size - 1),
- ((start + blkcnt + mmc->erase_grp_size)
- & ~(mmc->erase_grp_size - 1)) - 1);
-#endif
-
- while (blk < blkcnt) {
- blk_r = ((blkcnt - blk) > mmc->erase_grp_size) ?
- mmc->erase_grp_size : (blkcnt - blk);
- err = mmc_erase_t(mmc, start + blk, blk_r);
- if (err)
- break;
-
- blk += blk_r;
-
- /* Waiting for the ready status */
- if (mmc_send_status(mmc, timeout))
- return 0;
- }
-
- return blk;
-}
-
-static ulong
-mmc_write_blocks(struct mmc *mmc, lbaint_t start, lbaint_t blkcnt, const void*src)
-{
- struct mmc_cmd cmd;
- struct mmc_data data;
- int timeout = 1000;
-
- if ((start + blkcnt) > mmc->block_dev.lba) {
-#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
- printf("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n",
- start + blkcnt, mmc->block_dev.lba);
-#endif
- return 0;
- }
-
- if (blkcnt == 0)
- return 0;
- else if (blkcnt == 1)
- cmd.cmdidx = MMC_CMD_WRITE_SINGLE_BLOCK;
- else
- cmd.cmdidx = MMC_CMD_WRITE_MULTIPLE_BLOCK;
-
- if (mmc->high_capacity)
- cmd.cmdarg = start;
- else
- cmd.cmdarg = start * mmc->write_bl_len;
-
- cmd.resp_type = MMC_RSP_R1;
-
- data.src = src;
- data.blocks = blkcnt;
- data.blocksize = mmc->write_bl_len;
- data.flags = MMC_DATA_WRITE;
-
- if (mmc_send_cmd(mmc, &cmd, &data)) {
-#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
- printf("mmc write failed\n");
-#endif
- return 0;
- }
-
- /* SPI multiblock writes terminate using a special
- * token, not a STOP_TRANSMISSION request.
- */
- if (!mmc_host_is_spi(mmc) && blkcnt > 1) {
- cmd.cmdidx = MMC_CMD_STOP_TRANSMISSION;
- cmd.cmdarg = 0;
- cmd.resp_type = MMC_RSP_R1b;
- if (mmc_send_cmd(mmc, &cmd, NULL)) {
-#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
- printf("mmc fail to send stop cmd\n");
-#endif
- return 0;
- }
- }
-
- /* Waiting for the ready status */
- if (mmc_send_status(mmc, timeout))
- return 0;
-
- return blkcnt;
-}
-
-static ulong
-mmc_bwrite(int dev_num, lbaint_t start, lbaint_t blkcnt, const void*src)
-{
- lbaint_t cur, blocks_todo = blkcnt;
-
- struct mmc *mmc = find_mmc_device(dev_num);
- if (!mmc)
- return 0;
-
- if (mmc_set_blocklen(mmc, mmc->write_bl_len))
- return 0;
-
- do {
- cur = (blocks_todo > mmc->b_max) ? mmc->b_max : blocks_todo;
- if(mmc_write_blocks(mmc, start, cur, src) != cur)
- return 0;
- blocks_todo -= cur;
- start += cur;
- src += cur * mmc->write_bl_len;
- } while (blocks_todo > 0);
-
- return blkcnt;
-}
-
static int mmc_read_blocks(struct mmc *mmc, void *dst, lbaint_t start,
lbaint_t blkcnt)
{
--- /dev/null
+/*
+ * Copyright 2008,2010 Freescale Semiconductor, Inc
+ * Andy Fleming
+ *
+ * Based (loosely) on the Linux code
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _MMC_PRIVATE_H_
+#define _MMC_PRIVATE_H_
+
+#include <mmc.h>
+
+extern int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
+ struct mmc_data *data);
+extern int mmc_send_status(struct mmc *mmc, int timeout);
+extern int mmc_set_blocklen(struct mmc *mmc, int len);
+
+#ifndef CONFIG_SPL_BUILD
+
+extern unsigned long mmc_berase(int dev_num, lbaint_t start, lbaint_t blkcnt);
+
+extern ulong mmc_bwrite(int dev_num, lbaint_t start, lbaint_t blkcnt,
+ const void *src);
+
+#else /* CONFIG_SPL_BUILD */
+
+/* SPL will never write or erase, declare dummies to reduce code size. */
+
+static inline unsigned long mmc_berase(int dev_num, lbaint_t start,
+ lbaint_t blkcnt)
+{
+ return 0;
+}
+
+static inline ulong mmc_bwrite(int dev_num, lbaint_t start, lbaint_t blkcnt,
+ const void *src)
+{
+ return 0;
+}
+
+#endif /* CONFIG_SPL_BUILD */
+
+#endif /* _MMC_PRIVATE_H_ */
--- /dev/null
+/*
+ * Copyright 2008, Freescale Semiconductor, Inc
+ * Andy Fleming
+ *
+ * Based vaguely on the Linux code
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+#include <common.h>
+#include <part.h>
+#include "mmc_private.h"
+
+static ulong mmc_erase_t(struct mmc *mmc, ulong start, lbaint_t blkcnt)
+{
+ struct mmc_cmd cmd;
+ ulong end;
+ int err, start_cmd, end_cmd;
+
+ if (mmc->high_capacity) {
+ end = start + blkcnt - 1;
+ } else {
+ end = (start + blkcnt - 1) * mmc->write_bl_len;
+ start *= mmc->write_bl_len;
+ }
+
+ if (IS_SD(mmc)) {
+ start_cmd = SD_CMD_ERASE_WR_BLK_START;
+ end_cmd = SD_CMD_ERASE_WR_BLK_END;
+ } else {
+ start_cmd = MMC_CMD_ERASE_GROUP_START;
+ end_cmd = MMC_CMD_ERASE_GROUP_END;
+ }
+
+ cmd.cmdidx = start_cmd;
+ cmd.cmdarg = start;
+ cmd.resp_type = MMC_RSP_R1;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (err)
+ goto err_out;
+
+ cmd.cmdidx = end_cmd;
+ cmd.cmdarg = end;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (err)
+ goto err_out;
+
+ cmd.cmdidx = MMC_CMD_ERASE;
+ cmd.cmdarg = SECURE_ERASE;
+ cmd.resp_type = MMC_RSP_R1b;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (err)
+ goto err_out;
+
+ return 0;
+
+err_out:
+ puts("mmc erase failed\n");
+ return err;
+}
+
+unsigned long mmc_berase(int dev_num, lbaint_t start, lbaint_t blkcnt)
+{
+ int err = 0;
+ struct mmc *mmc = find_mmc_device(dev_num);
+ lbaint_t blk = 0, blk_r = 0;
+ int timeout = 1000;
+
+ if (!mmc)
+ return -1;
+
+ if ((start % mmc->erase_grp_size) || (blkcnt % mmc->erase_grp_size))
+ printf("\n\nCaution! Your devices Erase group is 0x%x\n"
+ "The erase range would be change to "
+ "0x" LBAF "~0x" LBAF "\n\n",
+ mmc->erase_grp_size, start & ~(mmc->erase_grp_size - 1),
+ ((start + blkcnt + mmc->erase_grp_size)
+ & ~(mmc->erase_grp_size - 1)) - 1);
+
+ while (blk < blkcnt) {
+ blk_r = ((blkcnt - blk) > mmc->erase_grp_size) ?
+ mmc->erase_grp_size : (blkcnt - blk);
+ err = mmc_erase_t(mmc, start + blk, blk_r);
+ if (err)
+ break;
+
+ blk += blk_r;
+
+ /* Waiting for the ready status */
+ if (mmc_send_status(mmc, timeout))
+ return 0;
+ }
+
+ return blk;
+}
+
+static ulong mmc_write_blocks(struct mmc *mmc, lbaint_t start,
+ lbaint_t blkcnt, const void *src)
+{
+ struct mmc_cmd cmd;
+ struct mmc_data data;
+ int timeout = 1000;
+
+ if ((start + blkcnt) > mmc->block_dev.lba) {
+ printf("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n",
+ start + blkcnt, mmc->block_dev.lba);
+ return 0;
+ }
+
+ if (blkcnt == 0)
+ return 0;
+ else if (blkcnt == 1)
+ cmd.cmdidx = MMC_CMD_WRITE_SINGLE_BLOCK;
+ else
+ cmd.cmdidx = MMC_CMD_WRITE_MULTIPLE_BLOCK;
+
+ if (mmc->high_capacity)
+ cmd.cmdarg = start;
+ else
+ cmd.cmdarg = start * mmc->write_bl_len;
+
+ cmd.resp_type = MMC_RSP_R1;
+
+ data.src = src;
+ data.blocks = blkcnt;
+ data.blocksize = mmc->write_bl_len;
+ data.flags = MMC_DATA_WRITE;
+
+ if (mmc_send_cmd(mmc, &cmd, &data)) {
+ printf("mmc write failed\n");
+ return 0;
+ }
+
+ /* SPI multiblock writes terminate using a special
+ * token, not a STOP_TRANSMISSION request.
+ */
+ if (!mmc_host_is_spi(mmc) && blkcnt > 1) {
+ cmd.cmdidx = MMC_CMD_STOP_TRANSMISSION;
+ cmd.cmdarg = 0;
+ cmd.resp_type = MMC_RSP_R1b;
+ if (mmc_send_cmd(mmc, &cmd, NULL)) {
+ printf("mmc fail to send stop cmd\n");
+ return 0;
+ }
+ }
+
+ /* Waiting for the ready status */
+ if (mmc_send_status(mmc, timeout))
+ return 0;
+
+ return blkcnt;
+}
+
+ulong mmc_bwrite(int dev_num, lbaint_t start, lbaint_t blkcnt, const void *src)
+{
+ lbaint_t cur, blocks_todo = blkcnt;
+
+ struct mmc *mmc = find_mmc_device(dev_num);
+ if (!mmc)
+ return 0;
+
+ if (mmc_set_blocklen(mmc, mmc->write_bl_len))
+ return 0;
+
+ do {
+ cur = (blocks_todo > mmc->b_max) ? mmc->b_max : blocks_todo;
+ if (mmc_write_blocks(mmc, start, cur, src) != cur)
+ return 0;
+ blocks_todo -= cur;
+ start += cur;
+ src += cur * mmc->write_bl_len;
+ } while (blocks_todo > 0);
+
+ return blkcnt;
+}
projects / u-boot / commitdiff