]> git.sur5r.net Git - u-boot/commitdiff
mmc: don't support write & erase for SPL builds
authorPaul Burton <paul.burton@imgtec.com>
Mon, 9 Sep 2013 14:30:26 +0000 (15:30 +0100)
committerPantelis Antoniou <panto@antoniou-consulting.com>
Fri, 20 Sep 2013 15:58:55 +0000 (18:58 +0300)
For SPL builds this is just dead code since we'll only need to read.
Eliminating it results in a significant size reduction for the SPL
binary, which may be critical for certain platforms where the binary
size is highly constrained.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
drivers/mmc/Makefile
drivers/mmc/mmc.c
drivers/mmc/mmc_private.h [new file with mode: 0644]
drivers/mmc/mmc_write.c [new file with mode: 0644]

index bedf833f70dfac17344af3195cfb33582c96ab34..06280d1fa6bb65d62b7873f04505992f85f371ec 100644 (file)
@@ -34,6 +34,8 @@ COBJS-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o
 COBJS-$(CONFIG_ZYNQ_SDHCI) += zynq_sdhci.o
 ifdef CONFIG_SPL_BUILD
 COBJS-$(CONFIG_SPL_MMC_BOOT) += fsl_esdhc_spl.o
+else
+COBJS-$(CONFIG_GENERIC_MMC) += mmc_write.o
 endif
 
 COBJS  := $(COBJS-y)
index 5550d46be9ea781d5480219fd63d09daa95c5430..84dae4d8bd8055d9f5cd78a6b421d7413a61f24c 100644 (file)
@@ -15,6 +15,7 @@
 #include <malloc.h>
 #include <linux/list.h>
 #include <div64.h>
+#include "mmc_private.h"
 
 /* Set block count limit because of 16 bit register limit on some hardware*/
 #ifndef CONFIG_SYS_MMC_MAX_BLK_COUNT
@@ -52,8 +53,7 @@ int __board_mmc_getcd(struct mmc *mmc) {
 int board_mmc_getcd(struct mmc *mmc)__attribute__((weak,
        alias("__board_mmc_getcd")));
 
-static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
-                       struct mmc_data *data)
+int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
 {
        int ret;
 
@@ -111,7 +111,7 @@ static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
        return ret;
 }
 
-static int mmc_send_status(struct mmc *mmc, int timeout)
+int mmc_send_status(struct mmc *mmc, int timeout)
 {
        struct mmc_cmd cmd;
        int err, retries = 5;
@@ -159,7 +159,7 @@ static int mmc_send_status(struct mmc *mmc, int timeout)
        return 0;
 }
 
-static int mmc_set_blocklen(struct mmc *mmc, int len)
+int mmc_set_blocklen(struct mmc *mmc, int len)
 {
        struct mmc_cmd cmd;
 
@@ -189,184 +189,6 @@ struct mmc *find_mmc_device(int dev_num)
        return NULL;
 }
 
-static ulong mmc_erase_t(struct mmc *mmc, ulong start, lbaint_t blkcnt)
-{
-       struct mmc_cmd cmd;
-       ulong end;
-       int err, start_cmd, end_cmd;
-
-       if (mmc->high_capacity)
-               end = start + blkcnt - 1;
-       else {
-               end = (start + blkcnt - 1) * mmc->write_bl_len;
-               start *= mmc->write_bl_len;
-       }
-
-       if (IS_SD(mmc)) {
-               start_cmd = SD_CMD_ERASE_WR_BLK_START;
-               end_cmd = SD_CMD_ERASE_WR_BLK_END;
-       } else {
-               start_cmd = MMC_CMD_ERASE_GROUP_START;
-               end_cmd = MMC_CMD_ERASE_GROUP_END;
-       }
-
-       cmd.cmdidx = start_cmd;
-       cmd.cmdarg = start;
-       cmd.resp_type = MMC_RSP_R1;
-
-       err = mmc_send_cmd(mmc, &cmd, NULL);
-       if (err)
-               goto err_out;
-
-       cmd.cmdidx = end_cmd;
-       cmd.cmdarg = end;
-
-       err = mmc_send_cmd(mmc, &cmd, NULL);
-       if (err)
-               goto err_out;
-
-       cmd.cmdidx = MMC_CMD_ERASE;
-       cmd.cmdarg = SECURE_ERASE;
-       cmd.resp_type = MMC_RSP_R1b;
-
-       err = mmc_send_cmd(mmc, &cmd, NULL);
-       if (err)
-               goto err_out;
-
-       return 0;
-
-err_out:
-#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
-       puts("mmc erase failed\n");
-#endif
-       return err;
-}
-
-static unsigned long
-mmc_berase(int dev_num, lbaint_t start, lbaint_t blkcnt)
-{
-       int err = 0;
-       struct mmc *mmc = find_mmc_device(dev_num);
-       lbaint_t blk = 0, blk_r = 0;
-       int timeout = 1000;
-
-       if (!mmc)
-               return -1;
-
-#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
-       if ((start % mmc->erase_grp_size) || (blkcnt % mmc->erase_grp_size))
-               printf("\n\nCaution! Your devices Erase group is 0x%x\n"
-                      "The erase range would be change to "
-                      "0x" LBAF "~0x" LBAF "\n\n",
-                      mmc->erase_grp_size, start & ~(mmc->erase_grp_size - 1),
-                      ((start + blkcnt + mmc->erase_grp_size)
-                      & ~(mmc->erase_grp_size - 1)) - 1);
-#endif
-
-       while (blk < blkcnt) {
-               blk_r = ((blkcnt - blk) > mmc->erase_grp_size) ?
-                       mmc->erase_grp_size : (blkcnt - blk);
-               err = mmc_erase_t(mmc, start + blk, blk_r);
-               if (err)
-                       break;
-
-               blk += blk_r;
-
-               /* Waiting for the ready status */
-               if (mmc_send_status(mmc, timeout))
-                       return 0;
-       }
-
-       return blk;
-}
-
-static ulong
-mmc_write_blocks(struct mmc *mmc, lbaint_t start, lbaint_t blkcnt, const void*src)
-{
-       struct mmc_cmd cmd;
-       struct mmc_data data;
-       int timeout = 1000;
-
-       if ((start + blkcnt) > mmc->block_dev.lba) {
-#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
-               printf("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n",
-                       start + blkcnt, mmc->block_dev.lba);
-#endif
-               return 0;
-       }
-
-       if (blkcnt == 0)
-               return 0;
-       else if (blkcnt == 1)
-               cmd.cmdidx = MMC_CMD_WRITE_SINGLE_BLOCK;
-       else
-               cmd.cmdidx = MMC_CMD_WRITE_MULTIPLE_BLOCK;
-
-       if (mmc->high_capacity)
-               cmd.cmdarg = start;
-       else
-               cmd.cmdarg = start * mmc->write_bl_len;
-
-       cmd.resp_type = MMC_RSP_R1;
-
-       data.src = src;
-       data.blocks = blkcnt;
-       data.blocksize = mmc->write_bl_len;
-       data.flags = MMC_DATA_WRITE;
-
-       if (mmc_send_cmd(mmc, &cmd, &data)) {
-#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
-               printf("mmc write failed\n");
-#endif
-               return 0;
-       }
-
-       /* SPI multiblock writes terminate using a special
-        * token, not a STOP_TRANSMISSION request.
-        */
-       if (!mmc_host_is_spi(mmc) && blkcnt > 1) {
-               cmd.cmdidx = MMC_CMD_STOP_TRANSMISSION;
-               cmd.cmdarg = 0;
-               cmd.resp_type = MMC_RSP_R1b;
-               if (mmc_send_cmd(mmc, &cmd, NULL)) {
-#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
-                       printf("mmc fail to send stop cmd\n");
-#endif
-                       return 0;
-               }
-       }
-
-       /* Waiting for the ready status */
-       if (mmc_send_status(mmc, timeout))
-               return 0;
-
-       return blkcnt;
-}
-
-static ulong
-mmc_bwrite(int dev_num, lbaint_t start, lbaint_t blkcnt, const void*src)
-{
-       lbaint_t cur, blocks_todo = blkcnt;
-
-       struct mmc *mmc = find_mmc_device(dev_num);
-       if (!mmc)
-               return 0;
-
-       if (mmc_set_blocklen(mmc, mmc->write_bl_len))
-               return 0;
-
-       do {
-               cur = (blocks_todo > mmc->b_max) ?  mmc->b_max : blocks_todo;
-               if(mmc_write_blocks(mmc, start, cur, src) != cur)
-                       return 0;
-               blocks_todo -= cur;
-               start += cur;
-               src += cur * mmc->write_bl_len;
-       } while (blocks_todo > 0);
-
-       return blkcnt;
-}
-
 static int mmc_read_blocks(struct mmc *mmc, void *dst, lbaint_t start,
                           lbaint_t blkcnt)
 {
diff --git a/drivers/mmc/mmc_private.h b/drivers/mmc/mmc_private.h
new file mode 100644 (file)
index 0000000..16dcf9f
--- /dev/null
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2008,2010 Freescale Semiconductor, Inc
+ * Andy Fleming
+ *
+ * Based (loosely) on the Linux code
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef _MMC_PRIVATE_H_
+#define _MMC_PRIVATE_H_
+
+#include <mmc.h>
+
+extern int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
+                       struct mmc_data *data);
+extern int mmc_send_status(struct mmc *mmc, int timeout);
+extern int mmc_set_blocklen(struct mmc *mmc, int len);
+
+#ifndef CONFIG_SPL_BUILD
+
+extern unsigned long mmc_berase(int dev_num, lbaint_t start, lbaint_t blkcnt);
+
+extern ulong mmc_bwrite(int dev_num, lbaint_t start, lbaint_t blkcnt,
+               const void *src);
+
+#else /* CONFIG_SPL_BUILD */
+
+/* SPL will never write or erase, declare dummies to reduce code size. */
+
+static inline unsigned long mmc_berase(int dev_num, lbaint_t start,
+               lbaint_t blkcnt)
+{
+       return 0;
+}
+
+static inline ulong mmc_bwrite(int dev_num, lbaint_t start, lbaint_t blkcnt,
+               const void *src)
+{
+       return 0;
+}
+
+#endif /* CONFIG_SPL_BUILD */
+
+#endif /* _MMC_PRIVATE_H_ */
diff --git a/drivers/mmc/mmc_write.c b/drivers/mmc/mmc_write.c
new file mode 100644 (file)
index 0000000..aa2fdef
--- /dev/null
@@ -0,0 +1,179 @@
+/*
+ * Copyright 2008, Freescale Semiconductor, Inc
+ * Andy Fleming
+ *
+ * Based vaguely on the Linux code
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <config.h>
+#include <common.h>
+#include <part.h>
+#include "mmc_private.h"
+
+static ulong mmc_erase_t(struct mmc *mmc, ulong start, lbaint_t blkcnt)
+{
+       struct mmc_cmd cmd;
+       ulong end;
+       int err, start_cmd, end_cmd;
+
+       if (mmc->high_capacity) {
+               end = start + blkcnt - 1;
+       } else {
+               end = (start + blkcnt - 1) * mmc->write_bl_len;
+               start *= mmc->write_bl_len;
+       }
+
+       if (IS_SD(mmc)) {
+               start_cmd = SD_CMD_ERASE_WR_BLK_START;
+               end_cmd = SD_CMD_ERASE_WR_BLK_END;
+       } else {
+               start_cmd = MMC_CMD_ERASE_GROUP_START;
+               end_cmd = MMC_CMD_ERASE_GROUP_END;
+       }
+
+       cmd.cmdidx = start_cmd;
+       cmd.cmdarg = start;
+       cmd.resp_type = MMC_RSP_R1;
+
+       err = mmc_send_cmd(mmc, &cmd, NULL);
+       if (err)
+               goto err_out;
+
+       cmd.cmdidx = end_cmd;
+       cmd.cmdarg = end;
+
+       err = mmc_send_cmd(mmc, &cmd, NULL);
+       if (err)
+               goto err_out;
+
+       cmd.cmdidx = MMC_CMD_ERASE;
+       cmd.cmdarg = SECURE_ERASE;
+       cmd.resp_type = MMC_RSP_R1b;
+
+       err = mmc_send_cmd(mmc, &cmd, NULL);
+       if (err)
+               goto err_out;
+
+       return 0;
+
+err_out:
+       puts("mmc erase failed\n");
+       return err;
+}
+
+unsigned long mmc_berase(int dev_num, lbaint_t start, lbaint_t blkcnt)
+{
+       int err = 0;
+       struct mmc *mmc = find_mmc_device(dev_num);
+       lbaint_t blk = 0, blk_r = 0;
+       int timeout = 1000;
+
+       if (!mmc)
+               return -1;
+
+       if ((start % mmc->erase_grp_size) || (blkcnt % mmc->erase_grp_size))
+               printf("\n\nCaution! Your devices Erase group is 0x%x\n"
+                      "The erase range would be change to "
+                      "0x" LBAF "~0x" LBAF "\n\n",
+                      mmc->erase_grp_size, start & ~(mmc->erase_grp_size - 1),
+                      ((start + blkcnt + mmc->erase_grp_size)
+                      & ~(mmc->erase_grp_size - 1)) - 1);
+
+       while (blk < blkcnt) {
+               blk_r = ((blkcnt - blk) > mmc->erase_grp_size) ?
+                       mmc->erase_grp_size : (blkcnt - blk);
+               err = mmc_erase_t(mmc, start + blk, blk_r);
+               if (err)
+                       break;
+
+               blk += blk_r;
+
+               /* Waiting for the ready status */
+               if (mmc_send_status(mmc, timeout))
+                       return 0;
+       }
+
+       return blk;
+}
+
+static ulong mmc_write_blocks(struct mmc *mmc, lbaint_t start,
+               lbaint_t blkcnt, const void *src)
+{
+       struct mmc_cmd cmd;
+       struct mmc_data data;
+       int timeout = 1000;
+
+       if ((start + blkcnt) > mmc->block_dev.lba) {
+               printf("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n",
+                      start + blkcnt, mmc->block_dev.lba);
+               return 0;
+       }
+
+       if (blkcnt == 0)
+               return 0;
+       else if (blkcnt == 1)
+               cmd.cmdidx = MMC_CMD_WRITE_SINGLE_BLOCK;
+       else
+               cmd.cmdidx = MMC_CMD_WRITE_MULTIPLE_BLOCK;
+
+       if (mmc->high_capacity)
+               cmd.cmdarg = start;
+       else
+               cmd.cmdarg = start * mmc->write_bl_len;
+
+       cmd.resp_type = MMC_RSP_R1;
+
+       data.src = src;
+       data.blocks = blkcnt;
+       data.blocksize = mmc->write_bl_len;
+       data.flags = MMC_DATA_WRITE;
+
+       if (mmc_send_cmd(mmc, &cmd, &data)) {
+               printf("mmc write failed\n");
+               return 0;
+       }
+
+       /* SPI multiblock writes terminate using a special
+        * token, not a STOP_TRANSMISSION request.
+        */
+       if (!mmc_host_is_spi(mmc) && blkcnt > 1) {
+               cmd.cmdidx = MMC_CMD_STOP_TRANSMISSION;
+               cmd.cmdarg = 0;
+               cmd.resp_type = MMC_RSP_R1b;
+               if (mmc_send_cmd(mmc, &cmd, NULL)) {
+                       printf("mmc fail to send stop cmd\n");
+                       return 0;
+               }
+       }
+
+       /* Waiting for the ready status */
+       if (mmc_send_status(mmc, timeout))
+               return 0;
+
+       return blkcnt;
+}
+
+ulong mmc_bwrite(int dev_num, lbaint_t start, lbaint_t blkcnt, const void *src)
+{
+       lbaint_t cur, blocks_todo = blkcnt;
+
+       struct mmc *mmc = find_mmc_device(dev_num);
+       if (!mmc)
+               return 0;
+
+       if (mmc_set_blocklen(mmc, mmc->write_bl_len))
+               return 0;
+
+       do {
+               cur = (blocks_todo > mmc->b_max) ?  mmc->b_max : blocks_todo;
+               if (mmc_write_blocks(mmc, start, cur, src) != cur)
+                       return 0;
+               blocks_todo -= cur;
+               start += cur;
+               src += cur * mmc->write_bl_len;
+       } while (blocks_todo > 0);
+
+       return blkcnt;
+}