]> git.sur5r.net Git - openocd/history - tcl/target
buspirate: Fix command parsing, fix errors to have more sense.
[openocd] / tcl / target /
2011-02-08 Luca Elleroomap4430: Add JRC TAPID for PandaBoard REV EA1 (PEAP...
2011-02-02 Aaron Carrollomap4430: fix reset sequence
2011-01-31 Aaron CarrollTCL configs for OMAP4430 and Pandaboard
2011-01-09 Freddie ChopinAdd another level of procedures to LPC2xxx initializati...
2011-01-07 Freddie ChopinAdd common LPC2xxx setup procedure, use in all LPC2xxx...
2010-12-23 Spencer Oliverstm32: add stm32 xl family flash support
2010-12-22 Øyvind Harboelpc2148: redo to the new target configuration scheme
2010-12-19 Michael Schwingenupdate IXP42x target / XBA board config
2010-12-18 Michael TrenschAdd support for Hilscher netX controllers
2010-12-18 Antonio BorneoTCL: fix non TCL comments
2010-12-09 Freddie Chopinremove srst_pulls_trst from LPC2xxx target scripts
2010-12-05 Rolf Meeserlpc2478 target config: CCLK as (mandatory) parameter
2010-12-03 Spencer Oliverstm32: set default soft reset config
2010-12-02 Spencer Oliverconfig: fix luminary jtag config
2010-12-02 Freddie Chopinrename some target scripts to be consistent with the...
2010-11-23 Antonio BorneoFLASH/NOR: rename from spearsmi to stmsmi
2010-11-23 Antonio BorneoSTR750: Add SMI interface support
2010-11-09 Antonio BorneoTCL scripts: replace "puts" with "echo"
2010-11-09 Andrew Leechlpc3131: target definition
2010-11-06 Antonio BorneoTCL scripts: add support for ST SPEAr310
2010-11-05 Marek VasutCortexA8: Introduce Freescale i.MX51 variant
2010-10-25 Peter StugeMake systesetreq typos read sysresetreq instead
2010-10-25 Peter StugeRemove srst_pulls_trst from LPC1768 target
2010-10-10 David Brownellswj-dp.tcl (SWD infrastructure #1)
2010-09-27 Zachary T WelchFix omap3_dbginit to write to physical memory.
2010-09-21 Antonio BorneoTCL scripts: collect duplicated procedures
2010-09-20 Karl KurbjunAM/DM37x: Unify configuration scripts and add support...
2010-09-14 Takács Áronboard scripts: Marvell PXA270M processor has a new...
2010-08-31 Spencer Olivercortex m3: add cortex_m3 reset_config cmd
2010-08-31 Spencer Olivercfg: update Luminary config files
2010-08-19 Øyvind Harboeimx35pdk: fix clock and reset delays
2010-08-17 Øyvind Harboemcb1700: Keil MCB1700 w/1768 config script
2010-08-15 Oleksandr Tymoshenkoavr32: basic target script
2010-08-15 David Brownellat32ap7000 config file
2010-08-13 Øyvind Harboelpc1768: turn down the jtag clock
2010-08-12 Thomas KoellerDM36x: Set OSCDIV divider
2010-08-12 Thomas KoellerDM36x: Disable unused SYSCLKs
2010-08-12 Thomas KoellerDM36x: Use enable bit for PLL pre-divider
2010-08-11 Øyvind Harboetcl: remove silly ocd_ prefix to array2mem and mem2array
2010-08-11 Øyvind Harboeconfig scripts: remove useless reference to OpenOCD...
2010-08-10 Ben Gardinercfg: add omapl138 support and da850evm preliminary...
2010-08-02 Øyvind Harboelpc1768: even if rclk "works", it isn't necessarily...
2010-08-01 Peter StugeRemove srst_pulls_trst from LPC2148 target
2010-07-30 Øyvind Harboelpc7168: make flash available upon reset init
2010-07-17 David Brownelllm3s811-ek uses generic stellaris target config
2010-07-13 Spencer Olivercfg: add Avalue RSC-W910 config
2010-06-25 Olaf Lükeat91sam3s* support
2010-06-15 Thomas KoellerDM36x: pll & clock setup
2010-06-15 michal smulskiarm1136 scripts
2010-05-26 Spencer Olivercfg: add pic32 virtual banks
2010-05-24 Freddie ChopinThere are no variants of arm7tdmi target
2010-05-24 Freddie ChopinAll LPC2xxx chips are little endian and that cannot...
2010-05-24 Freddie Chopinadd correct CPUTAPID value for LPC2129
2010-05-24 Freddie ChopinUpdate "flash bank" helper comments for LPC2xxx chips
2010-05-24 Freddie ChopinLPC23xx and LPC24xx after reset run on internal 4MHz...
2010-05-21 Øyvind Harboeat91sam9260: use RCLK
2010-05-18 Marc Pignatat91rm9200 : reset_config should go to the board config...
2010-05-13 Spencer Oliverscripts: update flash bank names
2010-04-24 michal smulskitelo: update configuration scripts to matched master...
2010-03-26 Antonio BorneoTCL scripts: update to current "flash bank" syntax
2010-03-16 Spencer OliverPIC32: add Microchip Explorer16 cfg
2010-03-15 David Brownellrename jtag_nsrst_assert_width as adapter_nsrst_assert_...
2010-03-15 David Brownellrename jtag_nsrst_delay as adapter_nsrst_delay
2010-03-15 David Brownellrename jtag_khz as adapter_khz
2010-03-15 Spencer OliverPIC32MX: update cfg script
2010-03-10 Spencer OliverPIC32: add flash algorithm support
2010-03-02 David BrownellLPC1768 updates, IAR board support
2010-02-28 Mariano AlviraAdd target/mc13224v.cfg
2010-02-15 David BrownellLPC1768.cfg -- partial fixes for bogus reset-init handler
2010-02-11 Viktar Palstsiuktarget library: configuration files for openocd tested...
2010-02-09 Spencer Oliverstr730.cfg: fix incorrect mem regions
2010-02-04 Ethan Eadescripts: Phytec/LPC2350 config scripts
2010-02-02 Harald KippAT91R40008/Ethernut 3 configuration
2010-02-02 Edgar Grimbergtcl/str7x: Reset init unlocks the flash
2010-02-02 Edgar Grimbergflash/str7x: After reset init the flash is unlocked
2010-01-20 Michael Grzeschiktcl/target/at91sam3u4e.cfg: changed case in dependent...
2010-01-05 Spencer OliverPIC32: enable ram execution
2009-12-17 Spencer Olivertarget.cfg: update to use new flash configuration syntax
2009-12-15 David Brownellmore tcl/{board,target} cleanup
2009-12-15 David Brownelltesting/examples/.../*cfg: rm jtag_device calls
2009-12-15 mkdorg@users.sourc... target: add basic dsp563xx support
2009-12-15 Øyvind Harboeimx31: move srst delay into config script
2009-12-15 David Brownelllm3748: use new Stellaris config file
2009-12-15 Yegor YefremovCommon target file for Stellaris chips
2009-12-07 David BrownellOMAP2420: define reset-assert event
2009-12-01 David BrownellTcl and doc: update to match new 'arm mcr ...' etc
2009-12-01 Øyvind Harboetarget: at91eb40a.cfg is a board, not a target.
2009-11-29 Marek Vasutcreate target/pxa3xx.cfg
2009-11-28 David Brownellomap3530.cfg: use new "reset-assert" event
2009-11-26 David Brownellomap3530.cfg: yes we have SRAM!
2009-11-20 David Brownelltarget.cfg: TAP id for Hilscher netX 500
2009-11-19 Zachary T Welchupdate 'flash bank' usage in scripts
2009-11-17 David BrownellARM: "armv4_5" command prefix becomes "arm"
2009-11-14 David BrownellARM11: ETM + ETB support
2009-11-14 David BrownelliMX2* + ETB targets: hook up ETM and ETB
2009-11-13 David Brownelltarget.cfg: label ETBs correctly
2009-11-10 David Brownelltarget.cfg: (re)move some bogus reset_config lines
2009-11-10 Thomas Kindlerstm32.cfg: remove reset_config
2009-11-10 Øyvind HarboeARM11: remove old mrc/mcr commands
2009-11-10 Øyvind Harboetelo.cfg: fix search paths
next