]> git.sur5r.net Git - openocd/history - tcl
flash/nor/at91sam4: fix sam4sa16c flash banks and its gpnvms count
[openocd] / tcl /
2018-07-18 Edward Fewellflash/nor: add support for TI MSP432 devices
2018-07-18 Peter Lawrencetcl/board: add SAMD11 Xplained Pro evaluation board
2018-07-18 Karl Palssontarget: atmel samd10 xplained mini
2018-07-14 Christopher Headtarget/stm32f7x: Clear stuck HSE clock with CSS
2018-07-13 Andreas Färbertcl: board: Add NXP Freedom FRDM-LS1012A config
2018-07-13 Andreas Färbertcl: target: Add NXP LS1012A config
2018-06-25 Marek Vasuttcl/board: Factor out common R-Car Gen2 code
2018-06-25 Marek Vasuttcl/board: Add Renesas R-Car R8A7794 E2 Silk board
2018-06-25 Marek Vasuttcl/board: Add Renesas R-Car R8A7791 M2W Porter board
2018-06-25 Marek Vasuttcl/board: Add Renesas R-Car R8A7790 H2 Stout board
2018-06-25 Marek Vasuttcl/target: Add Renesas R-Car R8A7794 E2 target
2018-06-15 Tomas Vanektcl/target/stm32f7x: configure faster system clock...
2018-06-15 Edward Fewellflash/nor: Add support for TI CC26xx/CC13xx flash
2018-06-06 Andreas Färberpsoc5lp: Add NV Latch flash driver
2018-06-06 Andreas Färberpsoc5lp: Add EEPROM flash driver
2018-06-06 Andreas Färberflash/nor: Add PSoC 5LP flash driver
2018-06-06 Edward Fewellflash/nor: Add support for TI CC3220SF internal flash
2018-05-31 Edward Fewelljtag/drivers: Add support for TI XDS110 debug probe
2018-04-23 Bohdan Tymkivpsoc6: Run flash algorithm asynchronously to improve...
2018-04-23 Matthias Welwarskyboard: add configuration for stm32f103c8 "Blue Pill"
2018-04-18 Marek Vasuttcl/target: Add Renesas R-Car R8A7790 H2 target
2018-04-12 Matthias Welwarskytarget: add Cortex-M4 target to VF6xx target
2018-04-10 Matthias Welwarskytarget: add configuration for NXP MC-IMX8M-EVK
2018-04-10 Matthias Welwarskytcl/board: add board configuration for NXP IMX7SABRE
2018-04-09 Niklas Söderlundtcl/target: Add Renesas R-Car R8A7791 M2W target
2018-03-30 Robert Jordensxilinx-dna.cfg: generic tools for reading Xilinx Device DNA
2018-03-30 Robert Jordenstcl/fpga/xilinx-xadc.cfg: add support for XADC
2018-03-30 Robert Jordenstcl/board: add support for Kasli
2018-03-30 Robert Jordenssayma_amc: add Sayma AMC board definition
2018-03-30 Robert Jordenskcu105: add support for Xilinx KCU105
2018-03-30 Robert Jordensxilinx-xcu: add Xilinx Ultrascale tap data
2018-03-30 Matthias Welwarskytarget: restructure dap support
2018-03-30 Matthias Welwarskytcl/board: add configuration for the avnet ultrazed...
2018-03-30 Matthias Welwarskyarm_cti: add cti command group
2018-03-15 Tomas Vanektcl/target: warn if a Kinetis MCU is connected to a...
2018-03-13 Matej Kogovsekjtag: drivers: add support for FT232R sync bitbang...
2018-03-13 Paul Fertsertcl: interface: usb blaster I: specify driver explicitly
2018-03-12 Mateusz ManowieckiAdd SWD protocol support to buspirate (2nd try)
2018-03-07 Robert Jordenspipistrello: decrease jtag speed to 10 MHz
2018-03-07 Michele SardoAdded support for STMicroelectronics BlueNRG-1 and...
2018-02-24 Jonas Norlingefm32: Add JTAG definitions to EFM32 target file
2018-02-21 Matthias Welwarskyicepick-d: extend access to core control register
2018-02-14 Bohdan TymkivAdd support for Cypress PSoC6 family of devices
2018-02-14 Tomas Vanekpsoc4: update for 4x00BLE, L, M, S and PRoC BLE devices
2018-02-01 Tomas VanekKinetis_ke: add KEAx family to texi and cfg comment
2018-01-30 Paul Fertsertcl: interface: harmonise RPi configs
2018-01-25 Paul Fertsertcl: target: klx: use 1KiB for working area
2018-01-16 Oleksij Rempeltarget: add initial imx7.cfg
2018-01-13 Robert Jordensjtagspi: new protocol that includes transfer length
2018-01-13 Patrick Stewartftdi swd: disable SWD output pin during input
2018-01-13 Robert Jordensdigilent_jtag_smt2_nc: add support
2018-01-13 barthessXCF (Xilinx platfrom flash) support.
2018-01-13 Pushpal Sidhuboard: consolidate st_nucleo_l4 boards
2018-01-12 Ake RehnmanAdded config files for stm8l152 stm8s003 and stm8s105
2017-12-20 Jiri Kastnerconfig for ESPRESSObin from Globalscale Tech. Inc.
2017-12-20 Jiri Kastnerconfigs for Marvell Armada 3700
2017-12-12 Paul Fertserjtag: drivers: stlink: handle all versions with single...
2017-12-08 elmotconfig: stm32l01x and stm32l02x chips support
2017-12-07 Ake Rehnmanstm8 : new target
2017-12-06 Alexandre TorgueAdd STM32H7 config files
2017-10-27 Jonathan McDowelltcl/interface/ftdi/openrd: Fix FTDI channel + device...
2017-10-16 Peter Griffintcl: add hi3798 target and Tocoding Poplar board config
2017-10-03 Slowcodernrf5: Add nRF52832-QFAA support
2017-10-03 Oleksij Rempeltarget: atheros_ar9344: add simple uart0 test
2017-10-03 Oleksij Rempelboard: add TP-Link WDR4300 config
2017-10-03 Oleksij Rempeltarget: add atheros_ar9344.cfg
2017-10-03 Oleksij Rempelboard: tp-link_tl-mr3020: add ath79 support
2017-10-03 Diego Herranztcl/interface/ftdi: improve minimodule config
2017-10-03 Jonathan McDowelltcl/interface/ftdi/sheevaplug: Fix FTDI channel configu...
2017-06-30 Moritz Fischerzynq_7000: Add expected id for Zynq 7z100 devices
2017-06-17 Tomas Vanekflash Kinetis: handle all types of watchdog, disable...
2017-06-17 Tomas Vanekflash Kinetis: implement automatic bank creation based...
2017-06-17 Tomas Vanektcl/target: make sure kex.cfg is not used for Kinetis...
2017-06-17 Tomas Vanekflash Kinetis: add KE1xZ and KE1xF families
2017-05-31 Grzegorz Kostkaimx_gpio: add mmap based jtag interface for IMX processors
2017-05-12 Forest Crossmanjtag/drivers: Add Cypress KitProg driver
2017-05-09 Moritz Fischertcl/cpld: add config file for Altera 5M570Z CPLD (MAXV...
2017-05-08 Juha Niskanenstm32l4: support flashing L45x/46x devices
2017-04-24 Marc Schinktcl/board: Add STMicroelectronics STM32F7 Nucleo config
2017-04-24 Jan Čapektcl STM32L0xx - add support for dual banked targets...
2017-04-24 Jerome LambourgAdd support for the ATMEL SAM G55 Xplained Pro board...
2017-04-23 Matthias Welwarskyboard: introduce base config for TI BeagleBone family...
2017-04-23 Matthias Bockadded interface config file for In-Circuit's ICprog...
2017-02-24 Matthias Welwarskytcl: add Hi6220 target and LeMaker HiKey board config
2017-02-13 Karl Palssonflash/nor: avrf: support atmega128rfa1
2017-01-15 Tomas Vanektcl at91samdXX.cfg: partially revert change 3722
2016-12-25 Paul Fertsertcl: target: imx5{1,3}: remove bogus tapenable command
2016-12-09 Matthias Welwarskyboard: add configuration for freescale twr-vf65gs10...
2016-12-08 Uwe Bonnesstm32l0.cfg: Add examine-end event like on other STM32...
2016-12-08 Owen Kirbyat91sam4: Add flash description and chipid for SAM4Cxx...
2016-12-08 Andreas Färbertcl/board: Add Infineon XMC4300 Relax EtherCAT Kit...
2016-12-08 Peter Lawrencetcl: Support for Analog Devices ADSP-SC58x
2016-12-08 Tomas Vanektcl at91samdXX.cfg: update config to current OpenOCD...
2016-11-06 Andreas FritiofsonRemove support for the GPL incompatible FTDI D2XX library
2016-11-06 Andreas FritiofsonRemove since long deprecated ft2232 driver
2016-11-04 Harald WelteAM335x: Disable watchdog on 'reset halt'
2016-11-04 Andreas Fritiofsoncfg: Don't check BS TAP IDCODE in STM32 configs
2016-11-04 Rick Foostcl/board: Add board configuration for nRF51-DK, and...
2016-10-17 Vivien Didelottcl/board: add Linksys WAG200G config
2016-10-17 Sean Crosstcl/board: add configuration for Novena's integrated...
next