]> git.sur5r.net Git - u-boot/log
u-boot
10 years agoboard/b4860qds:Slow MDC clock to comply IEEE specs in PBI config
Prabhakar Kushwaha [Sat, 8 Mar 2014 11:15:04 +0000 (16:45 +0530)]
board/b4860qds:Slow MDC clock to comply IEEE specs in PBI config

The MDC generate by default value of MDIO_CLK_DIV is too high i.e. higher
than 2.5 MHZ.  It violates the IEEE specs.

So Slow MDC clock to comply IEEE specs

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
10 years agot1040rdb/qe: add QE support for T1040RDB
Zhao Qiang [Fri, 14 Mar 2014 02:11:03 +0000 (10:11 +0800)]
t1040rdb/qe: add QE support for T1040RDB

add CONFIG_QE, CONFIG_U_QE and CONFIG_SYS_QE_FW_ADDR into
"include/configs/T1040RDB.h"

Signed-off-by: Zhao Qiang <B45475@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
10 years agoQE/U-QE: Add U-QE support
Zhao Qiang [Fri, 21 Mar 2014 08:21:45 +0000 (16:21 +0800)]
QE/U-QE: Add U-QE support

Modify code to adapt to both u-qe and qe.

U_QE is a kind of cutted QE.
the differences between U_QE and QE
1. UCC: U_QE supports 2 UCCs while QE supports up to 8 UCCs.
2. IMMR: have different immr base addr.
3. iopin: U_QE doesn't need to config iopin.

Signed-off-by: Zhao Qiang <B45475@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
10 years agoQE/FMAN: modify CONFIG_SYS_QE_FMAN_FW_ADDR to CONFIG_SYS_FMAN_FW_ADDR and CONFIG_SYS_...
Zhao Qiang [Fri, 21 Mar 2014 08:21:44 +0000 (16:21 +0800)]
QE/FMAN: modify CONFIG_SYS_QE_FMAN_FW_ADDR to CONFIG_SYS_FMAN_FW_ADDR and CONFIG_SYS_QE_FW_ADDR

CONFIG_SYS_QE_FMAN_FW_ADDR is used to both Fman and QE for microcode address.
Now using CONFIG_SYS_FMAN_FW_ADDR for Fman microcode address,
and CONFIG_SYS_QE_FW_ADDR for QE microcode address.

Signed-off-by: Zhao Qiang <B45475@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
10 years agopowerpc/mpc85xx: SECURE BOOT- Add secure boot target for T1040QDS and T1040RDB
Aneesh Bansal [Tue, 18 Mar 2014 18:11:14 +0000 (23:41 +0530)]
powerpc/mpc85xx: SECURE BOOT- Add secure boot target for T1040QDS and T1040RDB

Secure Boot Target is added for T1040QDS and T1040RDB
Changes:
For Secure boot, CPC is configured as SRAM and used as house
keeping area which needs to be disabled.
So CONFIG_SYS_CPC_REINIT_F is defined for CONFIG_T1040QDS and
CONFIG_T1040RDB

Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com>
Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
10 years agopowerpc/mpc85xx: SECURE BOOT- Add secure boot target for T2080QDS
Aneesh Bansal [Tue, 18 Mar 2014 18:10:59 +0000 (23:40 +0530)]
powerpc/mpc85xx: SECURE BOOT- Add secure boot target for T2080QDS

Secure Boot Target is added for T2080QDS
Changes:
For Secure boot, CPC is configured as SRAM and used as house
keeping area which needs to be disabled.
So CONFIG_SYS_CPC_REINIT_F is defined for CONFIG_T2080QDS.

Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
10 years agopowerpc/mpc85xx: SECURE BOOT- Add secure boot target for T4240QDS and T4160QDS
Aneesh Bansal [Tue, 18 Mar 2014 18:10:42 +0000 (23:40 +0530)]
powerpc/mpc85xx: SECURE BOOT- Add secure boot target for T4240QDS and T4160QDS

Secure Boot Target is added for T4240QDS and T4160QDS
Changes:
For Secure boot, CPC is configured as SRAM and used as house
keeping area which needs to be disabled.
So CONFIG_SYS_CPC_REINIT_F is defined for CONFIG_T4240QDS.

Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
10 years agopowerpc/mpc85xx: SECURE BOOT- Add secure boot target for B4860QDS
Aneesh Bansal [Tue, 18 Mar 2014 18:10:26 +0000 (23:40 +0530)]
powerpc/mpc85xx: SECURE BOOT- Add secure boot target for B4860QDS

Changes:
1. L2 cache is being invalidated by Boot ROM code for e6500 core.
   So removing the invalidation from start.S
2. Clear the LAW and corresponding configuration for CPC. Boot ROM
   code uses it as hosekeeping area.
3. For Secure boot, CPC is configured as SRAM and used as house
   keeping area. This configuration is to be disabled once in uboot.
   Earlier this disabling of CPC as SRAM was happening in cpu_init_r.
   As a result cache invalidation function was getting skipped in
   case CPC is configured as SRAM.This was causing random crashes.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
10 years agopowerpc/mpc85xx: SECURE BOOT- Add NAND secure boot target for BSC9132QDS
Aneesh Bansal [Wed, 12 Mar 2014 16:30:18 +0000 (22:00 +0530)]
powerpc/mpc85xx: SECURE BOOT- Add NAND secure boot target for BSC9132QDS

In case of secure boot from NAND, the DDR is initialized by the
BootROM using the config words (CF_WORDS) in the CF_HEADER
and u-boot image is copied from NAND to DDR by the BootROM.
So, CONFIG_SYS_RAMBOOT has been defined for Secure Boot from NAND

Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
10 years agopowerpc/mpc85xx: SECURE BOOT- Add secure boot target for BSC9132QDS
Aneesh Bansal [Tue, 11 Mar 2014 18:37:27 +0000 (00:07 +0530)]
powerpc/mpc85xx: SECURE BOOT- Add secure boot target for BSC9132QDS

Add NOR, SPI and SD secure boot targets for BSC9132QDS.

Changes:
- Debug TLB entry is not required for Secure Boot Target.

Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
10 years agopowerpc/mpc8xxx: SECURE BOOT- Disable law 0 for non PBL platforms
Aneesh Bansal [Tue, 11 Mar 2014 17:51:45 +0000 (23:21 +0530)]
powerpc/mpc8xxx: SECURE BOOT- Disable law 0 for non PBL platforms

ISBC creates a LAW 0 entry for non PBL platforms, which is not
disabled before transferring the control to uboot.
The LAW 0 entry has to be disabled.

Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
10 years agopowerpc/p1010rdb: SECURE BOOT- enable workaround for IFC errata A003399
Aneesh Bansal [Mon, 20 Jan 2014 09:27:03 +0000 (14:57 +0530)]
powerpc/p1010rdb: SECURE BOOT- enable workaround for IFC errata A003399

The workaround for IFC errata A003399 was not enabled
in case of secure boot. So, secure boot from NOR was not
working.

Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
10 years agopowerpc/p1010rdb: SECURE BOOT enabled for NAND
Aneesh Bansal [Fri, 7 Mar 2014 13:42:09 +0000 (19:12 +0530)]
powerpc/p1010rdb: SECURE BOOT enabled for NAND

In case of secure boot from NAND, the DDR is initialized by the
BootROM using the config words (CF_WORDS) in the CF_HEADER
and u-boot image is copied from NAND to DDR by the BootROM.
So, CONFIG_SYS_RAMBOOT has been defined for Secure Boot from NAND.

Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
10 years agofsl/usb: Fix phy type for Second USB controller
Nikhil Badola [Thu, 19 Dec 2013 05:38:46 +0000 (11:08 +0530)]
fsl/usb: Fix phy type for Second USB controller

Set correct phy_type value for second USB controller.
This is required for supporting SOCs having 2 USB controllers
working simultaneously, one with UTMI phy and other with ULPI phy

Signed-off-by: Nikhil Badola <B46172@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
10 years agoPPC 85xx: Add qemu-ppce500 machine
Alexander Graf [Fri, 11 Apr 2014 15:09:45 +0000 (17:09 +0200)]
PPC 85xx: Add qemu-ppce500 machine

For KVM we have a special PV machine type called "ppce500". This machine
is inspired by the MPC8544DS board, but implements a lot less features
than that one.

It also provides more PCI slots and is supposed to be enumerated by
device tree only.

This patch adds support for the generic ppce500 machine and tries to
rely solely on device tree for device enumeration.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Scott Wood <scottwood@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
10 years agoPPC 85xx: Add ELF entry point
Alexander Graf [Fri, 11 Apr 2014 15:09:44 +0000 (17:09 +0200)]
PPC 85xx: Add ELF entry point

We want to be able to directly execute the ELF binary without going
through the u-boot.bin one.

To know where we have to start executing this ELF binary  we have to
tell the linker where our entry point is.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Scott Wood <scottwood@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
10 years agoPPC: 85xx: Generalize DDR TLB mapping function
Alexander Graf [Fri, 11 Apr 2014 15:09:43 +0000 (17:09 +0200)]
PPC: 85xx: Generalize DDR TLB mapping function

The DDR mapping function really is just a generic virtual -> physical
mapping function. Generalize it so it can support any virtual starting
offset and IO maps just the same.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Scott Wood <scottwood@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
10 years agoPPC: 85xx: Remove IVOR reset
Alexander Graf [Fri, 11 Apr 2014 15:09:42 +0000 (17:09 +0200)]
PPC: 85xx: Remove IVOR reset

There is no need to set IVORs to anything but their default values,
so let's leave them where they are.

Suggested-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Scott Wood <scottwood@freescale.com>
[York Sun: Add back $(obj)start.S section in mpc8572ds/Makefile]
Reviewed-by: York Sun <yorksun@freescale.com>
10 years agofdt_support: Add helper function to read "ranges" property
Alexander Graf [Fri, 11 Apr 2014 15:09:41 +0000 (17:09 +0200)]
fdt_support: Add helper function to read "ranges" property

This patch adds a helper function that can be used to interpret most
"ranges" properties in the device tree.

It reads the n'th range out of a "ranges" array and returns the node's
virtual address of the range, the physical address that range starts at
and the size of the range.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Scott Wood <scottwood@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
10 years agofdt_support: split fdt_getprop_u32_default
Alexander Graf [Fri, 11 Apr 2014 15:09:40 +0000 (17:09 +0200)]
fdt_support: split fdt_getprop_u32_default

We already have a nice helper to give us a property cell value with default
fall back from a path. Split that into two helpers - one for the old path
based lookup and one to give us a value based on a node offset.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Scott Wood <scottwood@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
10 years agoARM:tegra20: Remove aes debug prints
Tom Rini [Fri, 18 Apr 2014 12:18:23 +0000 (08:18 -0400)]
ARM:tegra20: Remove aes debug prints

In 6e7b9f4 some of the debug prints for AES code moved into the generic
code, so we remove these additional calls.

Signed-off-by: Tom Rini <trini@ti.com>
Acked-by: Tom Warren <twarren@nvidia.com>
10 years agoaes: make apply_cbc_chain_data non-static
Stephen Warren [Fri, 18 Apr 2014 16:28:58 +0000 (10:28 -0600)]
aes: make apply_cbc_chain_data non-static

Tegra's crypto.c uses apply_cbc_chain_data() to sign the warm restart
code. This function was recently moved into the core aes.c and made
static, which prevents the Tegra code from compiling. Make it public
again to avoid the compile errors:

arch/arm/cpu/tegra20-common/crypto.c: In function ‘sign_object’:
arch/arm/cpu/tegra20-common/crypto.c:74:3: warning: implicit declaration of function ‘apply_cbc_chain_data’ [-Wimplicit-function-declaration]
arch/arm/cpu/built-in.o: In function `sign_object':
.../arch/arm/cpu/tegra20-common/crypto.c:74: undefined reference to `apply_cbc_chain_data'
.../arch/arm/cpu/tegra20-common/crypto.c:78: undefined reference to `apply_cbc_chain_data'

Fixes: 6e7b9f4fa0ae ("aes: Move the AES-128-CBC encryption function to common code")
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Marek Vasut <marex@denx.de>
10 years agobuild: Use filechk rules to create and update u-boot.lds
Jon Loeliger [Tue, 15 Apr 2014 21:09:37 +0000 (16:09 -0500)]
build: Use filechk rules to create and update u-boot.lds

Prior to this patch, the top-level linker script u-boot.lds
used a simple $(call if_changed) check when generated.
That mechanism misses cases where a possible include file
change induces a change in the u-boot.lds too.

This patch converts it to a stronger check using ($call filechk)
that will also notice differences in file contents and
will catch changes due to pre-processing as well.

Signed-off-by: Jon Loeliger <jon.loeliger@oracle.com>
10 years agobuildman: make output dir configurable
Daniel Schwierzeck [Thu, 17 Apr 2014 19:13:11 +0000 (21:13 +0200)]
buildman: make output dir configurable

Add an option to specify the output directory to override the
default path '../'. This is useful for building in a ramdisk.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
10 years agoe1000: remove redundant assignment
David Müller (ELSOFT AG) [Wed, 16 Apr 2014 11:15:59 +0000 (13:15 +0200)]
e1000: remove redundant assignment

Signed-off-by: David Mueller <d.mueller@elsoft.ch>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
10 years agobootm: set max decompression size for LZO
Kees Cook [Tue, 15 Apr 2014 17:28:12 +0000 (10:28 -0700)]
bootm: set max decompression size for LZO

The LZO decompressor wasn't initializing the maximum output size, which
meant it would fail to decompress most of the time.

Reported-by: Matthias Weißer <weisserm@arcor.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Matthias Weißer <weisserm@arcor.de>
Acked-by: Simon Glass <sjg@chromium.org>
10 years agokbuild: add user-supplied CPPFLAGS, AFLAGS and CFLAGS
Masahiro Yamada [Tue, 15 Apr 2014 05:47:40 +0000 (14:47 +0900)]
kbuild: add user-supplied CPPFLAGS, AFLAGS and CFLAGS

Like Linux Kernel, this commit provides environment variables
KCPPFLAGS, KAFLAGS and KCFLAGS, which are useful to pass
additional options.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
10 years agokbuild: docbook: sync with Linux Kernel v3.15-rc1
Masahiro Yamada [Tue, 15 Apr 2014 04:30:51 +0000 (13:30 +0900)]
kbuild: docbook: sync with Linux Kernel v3.15-rc1

This commit imports DocBook-related updates
from v3.14 to v3.15-rc1.

 - commit ec3fadd64b9940baa2a369bf978e8561837db3f5
    kbuild: docbook: use $(obj) and $(src) rather than specific path
 - commit 100da4c0150c97ce34d4d3b38bf2f5449b05ae4f
    kbuild: docbook: specify KERNELDOC dependency correctly
 - commit 6f89b9c1d6b29eaa600ac4a8ac1314b0d06f15e3
    kbuild: docbook: include cmd files more simply
 - commit ac6d662a95a6989d83b259ccf8ec01dd7903af73
    doc: Add "*.svg" to DocBook/.gitignore
 - commit 832919bfcf0cfd75767c68b0c61f7cf48be860a8
    DocBook: Make mandocs parallel-safe
 - commit c4d79a4799719f2b0cd354ee498aad605730c97e
    work around xmlto bug in htmldocs

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
10 years agokbuild: sync with Linux Kernel v3.15-rc1
Masahiro Yamada [Tue, 15 Apr 2014 04:29:00 +0000 (13:29 +0900)]
kbuild: sync with Linux Kernel v3.15-rc1

This commit imports Kbuild-related updates
from v3.14 to v3.15-rc1.

 - commit 3d3d6b8474204b6819688c9800774d52d370a538
    kbuild: LLVMLinux: Adapt warnings for compilation with clang
 - commit 61163efae02040f66a95c8ed17f4407951ba58fa
    kbuild: LLVMLinux: Add Kbuild support for building kernel with Clang
 - commit 79192ca8ebd9a25c583aa46024a250fef1e7766f
    scripts: objdiff: detect object code changes between two commits
 - commit 1c9e70a55b088d97a59241744fe459409d0c3582
    kbuild: create a build directory automatically for out-of-tree build
 - commit a03fcb50e816a69acffb13b5e56db75063aeba8a
    kbuild: remove redundant '.*.cmd' pattern from make distclean
 - commit 13338935f1574a2dcd1c891461b0dcc42f8cff42
    kbuild: move "quote" to Kbuild.include to be consistent
 - commit bfdfaeae500a3b194b73b01e92a8034791a58b7f
    kbuild: specify build_docproc as a phony target
 - commit f4d4ffc03efc864645b990e1d579bbe1b8e358a4
    kbuild: dtbs_install: new make target
 - commit 1e64ff42ea3d8d2fc8aa71f9717b3c1cb6c2f893
    Kbuild, lto: Disable LTO for asm-offsets.c
 - commit ccbef1674a1579842c7dbdf554efca85d2cd245a
    Kbuild, lto: add ld-version and ld-ifversion macros
 - commit ae63b2d7bdd9bd66b88843be0daf8e37d8f0b574
    scripts/tags.sh: Ignore *.mod.c
 - commit e36aaea28972c57a32a3ba5365e61633739719b9
    kbuild: Fix silent builds with make-4

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
10 years agopcnet: force ordering of descriptor accesses
Paul Burton [Mon, 7 Apr 2014 15:41:48 +0000 (16:41 +0100)]
pcnet: force ordering of descriptor accesses

The ordering of accesses to the rx & tx descriptors is important, yet
the send & recv functions accessed them via regular structure accesses.
This leaves the compiler with the opportunity to reorder those accesses
or to hoist them outside of loops. Prevent that from happening by using
readl & writel to access the descriptors. As a nice bonus, this removes
the need for the driver to care about endianness.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
10 years agopcnet: align rx buffers for cache invalidation
Paul Burton [Mon, 7 Apr 2014 15:41:47 +0000 (16:41 +0100)]
pcnet: align rx buffers for cache invalidation

The RX buffers are invalidated when a packet is received, however they
were not suitably cache-line aligned. Allocate them seperately to the
pcnet_priv structure and align to ARCH_DMA_MINALIGN in order to ensure
suitable alignment for the cache invalidation, preventing anything else
being placed in the same lines & lost.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
10 years agopcnet: access descriptor rings & init block uncached
Paul Burton [Mon, 7 Apr 2014 15:41:46 +0000 (16:41 +0100)]
pcnet: access descriptor rings & init block uncached

The prior accesses to the descriptor rings & init block via cached
memory had a few issues:

  - The memory needs cache flushes or invalidation at the appropriate
    times, but was not necessarily aligned on cache line boundaries.
    This could lead to data being incorrectly lost or written back to
    RAM at the wrong time.

  - There are points where ordering of writes to the memory is
    important, but because it's cached memory the pcnet controller
    would see cache lines written back ordered by address. This could
    occasionally lead to hardware seeing descriptors in an incorrect
    state.

  - Flushing the cache constantly is inefficient.

So, to avoid all of those issues simply access the descriptors & init
block via uncached memory. The MIPS-specific UNCACHED_SDRAM macro is
used to do this (retrieving an address in kseg1) as I could see no
existing generic solution. Since the MIPS Malta board is the only user
of the pcnet driver, hopefully this doesn't matter.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
10 years agodoc:power:pmic: Add doc entry for PMIC(v2) framework
Łukasz Majewski [Mon, 7 Apr 2014 12:34:44 +0000 (14:34 +0200)]
doc:power:pmic: Add doc entry for PMIC(v2) framework

Well written documentation for PMIC framework was missing and hence
it has been probably difficult and time consuming for other developers
to understand rationale for key design decisions and overall design
structure.
This commit provides proper documentation entry.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
10 years agoboard_r: return 0 from show_model_r
Paul Burton [Fri, 4 Apr 2014 11:23:24 +0000 (12:23 +0100)]
board_r: return 0 from show_model_r

The show_model_r function should return an int but didn't. Return 0 to
indicate inevitable success and avoid the following if it is used:

common/board_r.c: In function 'show_model_r':
common/board_r.c:531:1: warning: no return statement in function returning non-void [-Wreturn-type]
 }
 ^

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Simon Glass <sjg@chromium.org>
10 years agoarm: remove lubbock board support
Masahiro Yamada [Fri, 4 Apr 2014 06:25:11 +0000 (15:25 +0900)]
arm: remove lubbock board support

Enough time has passed since this board was moved to Orphan. Remove.

 - Remove board/lubbock/*
 - Remove include/configs/lubbock.h
 - Cleanup defined(CONFIG_LUBBOCK)
 - Move the entry from boards.cfg to doc/README.scrapyard

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
10 years agopowerpc: remove EVB64260 board support
Masahiro Yamada [Fri, 4 Apr 2014 06:25:10 +0000 (15:25 +0900)]
powerpc: remove EVB64260 board support

Enough time has passed since this board was moved to Orphan. Remove.

 - Remove include/configs/EVB64260.h
 - Remove the entry from boards.cfg

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
10 years agopowerpc: remove MOUSSE board support
Masahiro Yamada [Fri, 4 Apr 2014 06:25:09 +0000 (15:25 +0900)]
powerpc: remove MOUSSE board support

Enough time has passed since this board was moved to Orphan. Remove.

 - Remove board/mousse/*
 - Remove include/configs/MOUSSE.h
 - Clean-up defined(CONFIG_MOUSSE)
 - Move the entry from boards.cfg to doc/README.scrapyard

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
10 years agopowerpc: remove rsdproto board support
Masahiro Yamada [Fri, 4 Apr 2014 06:25:08 +0000 (15:25 +0900)]
powerpc: remove rsdproto board support

Enough time has passed since this board was moved to Orphan. Remove.

 - Remove board/rsdproto/*
 - Remove include/configs/rsdproto.h
 - Move the entry from boards.cfg to doc/README.scrapyard

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
10 years agopowerpc: remove RPXsuper board support
Masahiro Yamada [Fri, 4 Apr 2014 06:25:07 +0000 (15:25 +0900)]
powerpc: remove RPXsuper board support

Enough time has passed since this board was moved to Orphan. Remove.

 - Remove board/rpxsuper/*
 - Remove include/configs/RPXsuper.h
 - Move the entry from boards.cfg to doc/README.scrapyard

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
10 years agopowerpc: remove RPXClassic, RPXlite boards support
Masahiro Yamada [Fri, 4 Apr 2014 06:25:06 +0000 (15:25 +0900)]
powerpc: remove RPXClassic, RPXlite boards support

Enough time has passed since these boards were moved to Orphan. Remove.

 - Remove board/RPXlite/*
 - Remove board/RPXClassic/*
 - Remove include/configs/RPXlite.h
 - Remove include/configs/RPXClassic.h
 - Clean-up defined(CONFIG_RPXCLASSIC)
 - Move the entry from boards.cfg to doc/README.scrapyard

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
10 years agopowerpc: remove ADS860, FADS823, FADS850SAR, FADS860T support
Masahiro Yamada [Fri, 4 Apr 2014 06:25:05 +0000 (15:25 +0900)]
powerpc: remove ADS860, FADS823, FADS850SAR, FADS860T support

Enough time has passed since these boards were moved to Orphan. Remove.

 - Remove include/configs/{ADS860.h,FADS823.h,FADS850SAR.h,FADS860T.h}
 - Cleanup defined(CONFIG_ADS), defined(CONFIG_MPC823FADS),
   defined(CONFIG_MPC850SAR), defined(CONFIG_SYS_DAUGHTERBOARD)
 - Remove the entries from boards.cfg

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
10 years agopowerpc: remove genietv board support
Masahiro Yamada [Fri, 4 Apr 2014 06:25:04 +0000 (15:25 +0900)]
powerpc: remove genietv board support

Enough time has passed since this board was moved to Orphan. Remove.

 - Remove board/genietv/*
 - Remove include/configs/GENIETV.h
 - Clean-up if defined(CONFIG_GENIETV)
 - Move the entry from boards.cfg to doc/README.scrapyard

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
10 years agopowerpc: remove MBX and MBX860T boards support
Masahiro Yamada [Fri, 4 Apr 2014 06:25:03 +0000 (15:25 +0900)]
powerpc: remove MBX and MBX860T boards support

Enough time has passed since these boards were moved to Orphan. Remove.

 - Remove board/mbx8xx/*
 - Remove include/configs/{MBX.h,MBX860T.h}
 - Clean-up if defined(CONFIG_MBX)
 - Move the entries from boards.cfg to doc/README.scrapyard

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
10 years agopowerpc: remove NX823 board support
Masahiro Yamada [Fri, 4 Apr 2014 06:25:02 +0000 (15:25 +0900)]
powerpc: remove NX823 board support

Enough time has passed since this board was moved to Orphan. Remove.

 - Remove board/nx823/*
 - Remove include/configs/NX823.h
 - Clean-up ifdef(CONFIG_NX823)
 - Move the entry from boards.cfg to doc/README.scrapyard

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
10 years agotools: fix Makefile to clean-up fit_info and fit_check_sign
Masahiro Yamada [Tue, 1 Apr 2014 00:24:44 +0000 (09:24 +0900)]
tools: fix Makefile to clean-up fit_info and fit_check_sign

We should avoid the description in Makefile like this

ifdef CONFIG_FIT_SIGNATURE
hostprogs-y += fit_info$(SFX) fit_check_sign$(SFX)
endif

Otherwise, fit_info and fit_check_sign would never be cleaned
by "make clean".

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Heiko Schocher <hs@denx.de>
10 years agoblackfin: make name_to_gpio be a weak symbol
Ian Campbell [Thu, 27 Mar 2014 20:34:13 +0000 (20:34 +0000)]
blackfin: make name_to_gpio be a weak symbol

This required moving it into a C file from the header.

The only user of a non-default name_to_gpio is blackfin, therefore build tested
with the blackfin bct-brettl2 build, which is one I picked at random. Also
tested with a build for the ARM tec board which uses the default/fallback
implementation. Inspection with objdump shows that both have done the right
thing.

This change was requested by Marek during review of the sunxi patch series.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Sonic Zhang <sonic.adi@gmail.com>
10 years agoenv_flash.c: Drop unused variables
Tom Rini [Thu, 17 Apr 2014 20:20:39 +0000 (16:20 -0400)]
env_flash.c: Drop unused variables

With 7ce1526 we no longer need 'len' or 'res', so drop these variables.

Signed-off-by: Tom Rini <trini@ti.com>
10 years agoboards.cfg: move more boards with invalid emails to Orphan
Masahiro Yamada [Fri, 4 Apr 2014 06:37:14 +0000 (15:37 +0900)]
boards.cfg: move more boards with invalid emails to Orphan

Emails to the following addresses have been bouncing.

 - Nye Liu <nyet@zumanetworks.com>
 - Jim Thompson <jim@musenki.com>
 - Brad Kemp <Brad.Kemp@seranoa.com>

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
10 years agokbuild: do not use $(BOARD) to specify exact object name
Masahiro Yamada [Mon, 31 Mar 2014 04:30:18 +0000 (13:30 +0900)]
kbuild: do not use $(BOARD) to specify exact object name

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
10 years agokbuild: use boolean macros to select tegra*-common directory
Masahiro Yamada [Mon, 31 Mar 2014 04:29:48 +0000 (13:29 +0900)]
kbuild: use boolean macros to select tegra*-common directory

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
10 years agoboard: hidden_dragon: remove an unused source file
Masahiro Yamada [Mon, 31 Mar 2014 04:14:46 +0000 (13:14 +0900)]
board: hidden_dragon: remove an unused source file

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Yusdi Santoso <yusdi_santoso@adaptec.com>
10 years agoboard: dave: delete unused source files
Masahiro Yamada [Mon, 31 Mar 2014 04:14:12 +0000 (13:14 +0900)]
board: dave: delete unused source files

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Andrea Marson <andrea.marson@dave-tech.it>
10 years agoboard: prodrive: delete unused source files
Masahiro Yamada [Mon, 31 Mar 2014 04:12:52 +0000 (13:12 +0900)]
board: prodrive: delete unused source files

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Stefan Roese <sr@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
10 years agoboard: Marvell: delete an unused source file
Masahiro Yamada [Mon, 31 Mar 2014 04:12:12 +0000 (13:12 +0900)]
board: Marvell: delete an unused source file

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Lei Wen <leiwen@marvell.com>
10 years agostandalone: delete an unused source file
Masahiro Yamada [Mon, 31 Mar 2014 04:11:43 +0000 (13:11 +0900)]
standalone: delete an unused source file

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
10 years agoboard: sandpoint: delete an unused source file
Masahiro Yamada [Mon, 31 Mar 2014 04:10:11 +0000 (13:10 +0900)]
board: sandpoint: delete an unused source file

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Jim Thompson <jim@musenki.com>
10 years agoboard: ppmc8260: delete an unused source file
Masahiro Yamada [Mon, 31 Mar 2014 04:09:39 +0000 (13:09 +0900)]
board: ppmc8260: delete an unused source file

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Brad Kemp <Brad.Kemp@seranoa.com>
10 years agopowerpc: mpc8xx: delete an unused source file
Masahiro Yamada [Tue, 1 Apr 2014 08:15:13 +0000 (17:15 +0900)]
powerpc: mpc8xx: delete an unused source file

References to the wireless keyboard should also be removed
from README.console.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Wolfgang Denk <wd@denx.de>
10 years agoboard: altera: delete unused source files
Masahiro Yamada [Mon, 31 Mar 2014 04:06:38 +0000 (13:06 +0900)]
board: altera: delete unused source files

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Scott McNutt <smcnutt@psyent.com>
10 years agoboard: evb64260: delete an unused source file
Masahiro Yamada [Mon, 31 Mar 2014 04:05:58 +0000 (13:05 +0900)]
board: evb64260: delete an unused source file

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Nye Liu <nyet@zumanetworks.com>
10 years agoboard: samsung: delete unused source files
Masahiro Yamada [Mon, 31 Mar 2014 04:05:28 +0000 (13:05 +0900)]
board: samsung: delete unused source files

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Mateusz Zalega <m.zalega@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Acked-by: Mateusz Zalega <m.zalega@samsung.com>
10 years agofloppy: delete unused files
Masahiro Yamada [Mon, 31 Mar 2014 04:02:51 +0000 (13:02 +0900)]
floppy: delete unused files

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
10 years agomtd: delete unused files
Masahiro Yamada [Mon, 31 Mar 2014 04:01:09 +0000 (13:01 +0900)]
mtd: delete unused files

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Scott Wood <scottwood@freescale.com>
10 years agoboard: esd: remove remainders of dead boards
Masahiro Yamada [Mon, 31 Mar 2014 03:59:58 +0000 (12:59 +0900)]
board: esd: remove remainders of dead boards

Commit 99bcad18 deleted ADCIOP and DASA_SIM board support
but missed to delete board/esd/adciop and board/esd/dasa_sim.
It also missed to add entries to doc/README.scrapyard.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Stefan Roese <sr@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu>
10 years agocosmetic: README.scrapyard: fix false removed date and commit
Masahiro Yamada [Mon, 31 Mar 2014 03:58:54 +0000 (12:58 +0900)]
cosmetic: README.scrapyard: fix false removed date and commit

Describe removed date in the form of YYYY-MM-DD, not YYYY-DD-MM.
And wrong commit hash also should be fixed.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Marek Vasut <marex@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
10 years agocosmetic: README.scrapyard: sort in reverse chronological order
Masahiro Yamada [Mon, 31 Mar 2014 03:57:17 +0000 (12:57 +0900)]
cosmetic: README.scrapyard: sort in reverse chronological order

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
10 years agoMerge branch 'next'
Tom Rini [Thu, 17 Apr 2014 18:33:25 +0000 (14:33 -0400)]
Merge branch 'next'

10 years agoStart the deprecation process for generic board
Simon Glass [Sat, 22 Mar 2014 23:14:51 +0000 (17:14 -0600)]
Start the deprecation process for generic board

We should move forward to remove the old board init code. Add a
prominent message to encourage maintainers to get started on this
work.

Signed-off-by: Simon Glass <sjg@chromium.org>
10 years agoPrepare v2014.04 v2014.04
Tom Rini [Mon, 14 Apr 2014 19:19:24 +0000 (15:19 -0400)]
Prepare v2014.04

Signed-off-by: Tom Rini <trini@ti.com>
10 years agoarm: kzm9g: Add CONFIG_SYS_GENERIC_BOARD
Tetsuyuki Kobayashi [Mon, 14 Apr 2014 08:13:58 +0000 (17:13 +0900)]
arm: kzm9g: Add CONFIG_SYS_GENERIC_BOARD

Add CONFIG_SYS_GENERIC_BOARD to use common/board_[fr].c for kzm9g.

Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
10 years agoi2c: sh_i2c: bugfix: i2c probe command does not work
Tetsuyuki Kobayashi [Mon, 14 Apr 2014 08:13:57 +0000 (17:13 +0900)]
i2c: sh_i2c: bugfix: i2c probe command does not work

This is regression of commit 2035d77d i2c: sh_i2c: Update to new CONFIG_SYS_I2C framework

Before commit 2035d77d, i2c probe command works properly on kzm9g board.

KZM-A9-GT# i2c probe
Valid chip addresses: 0C 12 1D 32 39 3D 40 60

After commit 2035d77d, i2c probe command does not work.

KZM-A9-GT# i2c probe
Valid chip addresses: 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4E 4F 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5D 5E 5F 60 61 62 63 64 65 66 67 68 69 6A 6B 6C 6D 6E 6F 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7D 7E 7F

sh_i2c_probe() calls sh_i2c_read(), but read length is 0. So acutally it does not read device at all. This patch prepares dummy buffer and read data into it.

Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
10 years agoboard:tricorder: fixup SPL OOB layout
Andreas Bießmann [Thu, 10 Apr 2014 10:52:52 +0000 (12:52 +0200)]
board:tricorder: fixup SPL OOB layout

Commit d016dc42cedbf6102e100fa9ecb58462edfb14f8 changed the layout of BCH8 SW
on omap3 boards. We need to adopt the ecc layout for the nand_spl_simle
driver to avoid wrong ecc errors.

Signed-off-by: Andreas Bießmann <andreas.biessmann@corscience.de>
Cc: Thomas Weber <thomas.weber@corscience.de>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
10 years agoboard:tricorder: enable omap_gpio clocks
Andreas Bießmann [Thu, 10 Apr 2014 10:52:51 +0000 (12:52 +0200)]
board:tricorder: enable omap_gpio clocks

Signed-off-by: Andreas Bießmann <andreas.biessmann@corscience.de>
Cc: Thomas Weber <thomas.weber@corscience.de>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
10 years agoboard:tricorder: always work with valid eeprom data
Andreas Bießmann [Thu, 10 Apr 2014 10:52:50 +0000 (12:52 +0200)]
board:tricorder: always work with valid eeprom data

Commit 890880583d84607e36b52a785a96b167728bbf73 introduced EEPROM parsing and
board detection but faild to return a valid tricorder_eeprom struct for backup
case.  When pressing S200 while reading EEPROM we ignore the value. We
returned falsely a tricorder_eeprom struct with uninitialized data which is
just garbage.
Initialize it by zeroing the whole structure.

Signed-off-by: Andreas Bießmann <andreas.biessmann@corscience.de>
Cc: Thomas Weber <thomas.weber@corscience.de>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
10 years agoarm:board:trats2:FIX: Clear INFORM4 and INFORM5 registers at correct boot
Łukasz Majewski [Wed, 9 Apr 2014 13:09:44 +0000 (15:09 +0200)]
arm:board:trats2:FIX: Clear INFORM4 and INFORM5 registers at correct boot

During switch to device tree, commit 1ecab0f has removed this code.

INFORM4 and INFORM5 registers are used by TRATS2 first stage bootloader for
providing recovery. For normal operation, those two must be cleared out.

This error emerges when one force reset from u-boot's command line for
three times.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Acked-by: Minkyu Kang <mk7.kang@samsung.com>
10 years agokbuild: fix a bug in regeneration of linker scripts
Masahiro Yamada [Wed, 9 Apr 2014 11:10:43 +0000 (20:10 +0900)]
kbuild: fix a bug in regeneration of linker scripts

In some use cases, SPL linker script was not updated even when
it should be.

For instance,

  $ make tricoder_config all
    [ build complete ]
  ... modify include/configs/tricoder.h
  $ make

spl/u-boot-spl.lds should be updated in this case, but it wasn't.

To fix this problem, linker scripts generation should be handled
by $(call if_changed_dep,...) rather than by $(call if_changed,...).

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Reported-by: Andreas Bießmann <andreas.devel@googlemail.com>
Tested-by: Andreas Bießmann <andreas.devel@googlemail.com>
10 years agoMerge branch 'u-boot/master' into 'u-boot-arm/master'
Albert ARIBAUD [Tue, 8 Apr 2014 07:25:08 +0000 (09:25 +0200)]
Merge branch 'u-boot/master' into 'u-boot-arm/master'

Conflicts:
arch/arm/cpu/arm926ejs/mxs/Makefile
include/configs/trats.h
include/configs/trats2.h
include/mmc.h

10 years agoarm64 patch: gicv3 support
David Feng [Fri, 14 Mar 2014 06:26:27 +0000 (14:26 +0800)]
arm64 patch: gicv3 support

This patch add gicv3 support to uboot armv8 platform.

Changes for v2:
  - rename arm/cpu/armv8/gic.S with arm/lib/gic_64.S
  - move smp_kick_all_cpus() from gic.S to start.S, it would be
    implementation dependent.
  - Each core initialize it's own ReDistributor instead of master
    initializeing all ReDistributors. This is advised by arnab.basu
    <arnab.basu@freescale.com>.

Signed-off-by: David Feng <fenghua@phytium.com.cn>
10 years agobootstage: arm: fix fdt stashing code
Mela Custodio [Wed, 19 Feb 2014 15:16:56 +0000 (00:16 +0900)]
bootstage: arm: fix fdt stashing code

The conditional is using a variable that is not defined.

Signed-off-by: Rommel G Custodio <sessyargc+u-boot@gmail.com>
10 years agoARMv8: fix bug for flush data cache by set/way
Leo Yan [Mon, 31 Mar 2014 01:50:35 +0000 (09:50 +0800)]
ARMv8: fix bug for flush data cache by set/way

When flush the d$ with set/way instruction, it need calculate the way's
offset = log2(Associativity); but in current uboot's code, it use below
formula to calculate the offset: log2(Associativity * 2 - 1), so finally
it cannot flush data cache properly.

Signed-off-by: Leo Yan <leoy@marvell.com>
10 years agoarmv8: Flush dcache before switching to EL2
York Sun [Mon, 31 Mar 2014 21:40:32 +0000 (14:40 -0700)]
armv8: Flush dcache before switching to EL2

For ARMv8, U-boot has been running at EL3 with cache and MMU enabled.
Without proper setup for EL2, cache and MMU are both disabled (out of
reset). Before switching, we need to flush the dcache to make sure the
data is in the main memory.

Signed-off-by: York Sun <yorksun@freescale.com>
Acked-by: David.Feng <fenghua@phytium.com.cn>
10 years agoarm: vf610: fix double iomux configuration for vf610twr board
Marcel Ziswiler [Tue, 11 Mar 2014 17:44:00 +0000 (18:44 +0100)]
arm: vf610: fix double iomux configuration for vf610twr board

Get rid of double VF610_PAD_DDR_A15__DDR_A_15 iomux configuration.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
10 years agoarm: vf610: add enet1 support
Marcel Ziswiler [Tue, 11 Mar 2014 17:43:59 +0000 (18:43 +0100)]
arm: vf610: add enet1 support

This patch contains several changes required for second Ethernet
(enet1/RMII1) port on vf610
- ANADIG PLL5 control definitions required for Ethernet RMII1 clock
- Secondary Ethernet (enet1) MAC RMII1 base address definition
- RMII1 iomux definitions
- VF610_PAD_PTA6__RMII0_CLKOUT iomux definition required for
  internal (e.g. crystal-less) Ethernet clocking.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
[stefan@agner.ch: regrouped patch]
Signed-off-by: Stefan Agner <stefan@agner.ch>
10 years agoarm: vf610: add uart0 clock/iomux definitions
Marcel Ziswiler [Tue, 11 Mar 2014 17:43:58 +0000 (18:43 +0100)]
arm: vf610: add uart0 clock/iomux definitions

Add CCM_CCGR0_UART0_CTRL_MASK clock definition and add TX/RX iomux
definitions for UART0 (aka. SCI0).

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
[stefan@agner.ch: regrouped patch]
Signed-off-by: Stefan Agner <stefan@agner.ch>
10 years agoarm: vf610: fix anadig register struct
Marcel Ziswiler [Tue, 11 Mar 2014 17:43:57 +0000 (18:43 +0100)]
arm: vf610: fix anadig register struct

The anadig_reg structure started at the wrong offset (fixed by adding
reserved_0x000[4]), was missing some reserved field required for
alignment purpose (reserved_0x094[3] between pll4_denom and pll6_ctrl)
and further contained a too short reserved field causing further miss-
alignment (reserved_0x0C4[7]). Also, rename all the reserved fields
and using a memory offset based scheme for.

Discovered and tested by temporarily putting the following debug
instrumentation into board_init():
    struct anadig_reg *anadig = (struct anadig_reg *)ANADIG_BASE_ADDR;
    printf("&anadig->pll3_ctrl=0x%p\n", &anadig->pll3_ctrl);
    printf("&anadig->pll5_ctrl=0x%p\n", &anadig->pll5_ctrl);

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
[stefan@agner.ch: regrouped patch]
Signed-off-by: Stefan Agner <stefan@agner.ch>
10 years agobuild:arm: Remove setting of CROSS_COMPILE environment variable
Łukasz Majewski [Tue, 18 Mar 2014 15:46:48 +0000 (16:46 +0100)]
build:arm: Remove setting of CROSS_COMPILE environment variable

After Kbuild introduction, the CROSS_COMPILE environment variable has been
set to some default value (prefix arm-linux-).

This shall be removed since it breaks building u-boot for native arm target
(like qemu ARM).
Moreover not all compilers have arm-linux- prefix.

Additionally the u-boot cross compiles with CROSS_COMPILE= set explicitly-
e.g.:
CROSS_COMPILE=/ .... /arm-v7a-linux-gnueabi- make

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
10 years agoMerge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Albert ARIBAUD [Mon, 7 Apr 2014 17:13:42 +0000 (19:13 +0200)]
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'

10 years agoMX6: Enable ARM errata workaround 794072 and 761320
Nitin Garg [Wed, 2 Apr 2014 13:55:03 +0000 (08:55 -0500)]
MX6: Enable ARM errata workaround 794072 and 761320

Since MX6 is Cortex-A9 r2p10, enable software workaround
for errata 794072 and 761320.

Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
10 years agoARM: Add workaround for Cortex-A9 errata 761320
Nitin Garg [Wed, 2 Apr 2014 13:55:02 +0000 (08:55 -0500)]
ARM: Add workaround for Cortex-A9 errata 761320

Full cache line writes to the same memory region from at least two
processors might deadlock the processor. Exists on r1, r2, r3
revisions.

Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
10 years agoARM: Add workaround for Cortex-A9 errata 794072
Nitin Garg [Wed, 2 Apr 2014 13:55:01 +0000 (08:55 -0500)]
ARM: Add workaround for Cortex-A9 errata 794072

A short loop including a DMB instruction might cause a denial of
service on another processor which executes a CP15 broadcast operation.
Exists on r1, r2, r3, r4 revisions.

Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
10 years agoarmv8/cache: Change cache invalidate and flush function
York Sun [Wed, 26 Feb 2014 21:26:04 +0000 (13:26 -0800)]
armv8/cache: Change cache invalidate and flush function

When SoC first boots up, we should invalidate the cache but not flush it.
We can use the same function for invalid and flush mostly, with a wrapper.

Invalidating large cache can ben slow on emulator, so we postpone doing
so until I-cache is enabled, and before enabling D-cache.

Signed-off-by: York Sun <yorksun@freescale.com>
CC: David Feng <fenghua@phytium.com.cn>
10 years agoarmv8/cache: Flush D-cache, invalidate I-cache for relocation
York Sun [Wed, 26 Feb 2014 21:26:03 +0000 (13:26 -0800)]
armv8/cache: Flush D-cache, invalidate I-cache for relocation

If D-cache is enabled, we need to flush it, and invalidate i-cache before
jumping to the new location. This should be done right after relocation.

Signed-off-by: York Sun <yorksun@freescale.com>
CC: David Feng <fenghua@phytium.com.cn>
10 years agoarmv8/cache: Consolidate setting for MAIR and TCR
York Sun [Wed, 26 Feb 2014 21:26:02 +0000 (13:26 -0800)]
armv8/cache: Consolidate setting for MAIR and TCR

Move setting for MAIR and TCR to cache_v8.c, to avoid conflict with
sub-architecture.

Signed-off-by: York Sun <yorksun@freescale.com>
CC: David Feng <fenghua@phytium.com.cn>
10 years agoarm: Handle .gnu.hash section in ldscripts
Andreas Färber [Mon, 27 Jan 2014 04:48:11 +0000 (05:48 +0100)]
arm: Handle .gnu.hash section in ldscripts

Avoids "could not find output section .gnu.hash" ld.bfd errors on openSUSE.

Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Tom Rini <trini@ti.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
10 years agosocfpga: Adding Clock Manager driver
Chin Liang See [Wed, 5 Mar 2014 04:13:53 +0000 (22:13 -0600)]
socfpga: Adding Clock Manager driver

Clock Manager driver will be called to reconfigure all the
clocks setting based on user input. The input are passed to
Preloader through handoff files

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
CC: Pavel Machek <pavel@denx.de>
Cc: Dinh Nguyen <dinguyen@altera.com>
Acked-by: Pavel Machek <pavel@denx.de>
10 years agoRevert "Start the deprecation process for generic board"
Tom Rini [Fri, 4 Apr 2014 14:09:19 +0000 (10:09 -0400)]
Revert "Start the deprecation process for generic board"

We've run into a non-trivial conversion to CONFIG_SYS_GENERIC_BOARD so
we'll postpone this notice until right after v2014.04 is out.

This reverts commit 36c4b1d98059244c34ec3327d9cc9f3c552fd01b.

Signed-off-by: Tom Rini <trini@ti.com>
10 years agoarm: mxs: Add support for generating signed BootStream
Marek Vasut [Thu, 3 Apr 2014 17:12:21 +0000 (19:12 +0200)]
arm: mxs: Add support for generating signed BootStream

This patch adds the groundwork for generating signed BootStream, which
can be used by the HAB library in i.MX28. We are adding a new target,
u-boot-signed.sb , since the process for generating regular non-signed
BootStream is much easier. Moreover, the signed bootstream depends on
external _proprietary_ _binary-only_ tool from Freescale called 'cst',
which is available only under NDA.

To make things even uglier, the CST or HAB mandates a kind-of circular
dependency. The problem is, unlike the regular IVT, which is generated
by mxsimage, the IVT for signed boot must be generated by hand here due
to special demands of the CST. The U-Boot binary (or SPL binary) and IVT
are then signed by the CST as a one block. But here is the problem. The
size of the entire image (U-Boot, IVT, CST blocks) must be appended at
the end of IVT. But the size of the entire image is not known until the
CST has finished signing the U-Boot and IVT. We solve this by expecting
the CST block to be always 3904B (which it is in case two files, U-Boot
and the hand-made IVT, are signed in the CST block).

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
10 years agoMerge branch 'master' of git://git.denx.de/u-boot-arm into master
Stefano Babic [Fri, 4 Apr 2014 09:35:30 +0000 (11:35 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-arm into master

Conflicts:
arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg
arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg

Signed-off-by: Stefano Babic <sbabic@denx.de>
10 years agoRevert "arm: mxs: Add support for generating signed BootStream"
Stefano Babic [Fri, 4 Apr 2014 09:29:29 +0000 (11:29 +0200)]
Revert "arm: mxs: Add support for generating signed BootStream"

This reverts commit 53e6b14e037c9f72e6d03244c32d8d597e2e0234.

Patch does not merge anymore with u-boot-arm and must be rebased.

Signed-off-by: Stefano Babic <sbabic@denx.de>
10 years agotrats/trats2: enable CONFIG_RANDOM_UUID
Przemyslaw Marczak [Wed, 2 Apr 2014 08:20:07 +0000 (10:20 +0200)]
trats/trats2: enable CONFIG_RANDOM_UUID

This change enables automatically uuid generation by command gpt.
In case of updating partitions layout user don't need to care about
generate uuid manually.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Piotr Wilczek <p.wilczek@samsung.com>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: trini@ti.com