]> git.sur5r.net Git - u-boot/commitdiff
QE/FMAN: modify CONFIG_SYS_QE_FMAN_FW_ADDR to CONFIG_SYS_FMAN_FW_ADDR and CONFIG_SYS_...
authorZhao Qiang <B45475@freescale.com>
Fri, 21 Mar 2014 08:21:44 +0000 (16:21 +0800)
committerYork Sun <yorksun@freescale.com>
Wed, 23 Apr 2014 00:58:47 +0000 (17:58 -0700)
CONFIG_SYS_QE_FMAN_FW_ADDR is used to both Fman and QE for microcode address.
Now using CONFIG_SYS_FMAN_FW_ADDR for Fman microcode address,
and CONFIG_SYS_QE_FW_ADDR for QE microcode address.

Signed-off-by: Zhao Qiang <B45475@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
21 files changed:
README
arch/powerpc/cpu/mpc85xx/cpu_init.c
drivers/net/fm/fm.c
drivers/qe/qe.c
include/configs/B4860QDS.h
include/configs/MPC8569MDS.h
include/configs/P1023RDB.h
include/configs/P1023RDS.h
include/configs/P2041RDB.h
include/configs/T1040QDS.h
include/configs/T1040RDB.h
include/configs/T1042RDB_PI.h
include/configs/T208xQDS.h
include/configs/T208xRDB.h
include/configs/T4240EMU.h
include/configs/T4240QDS.h
include/configs/corenet_ds.h
include/configs/km/km8309-common.h
include/configs/km/kmp204x-common.h
include/configs/p1_p2_rdb_pc.h
include/configs/p1_twr.h

diff --git a/README b/README
index 4715cfbc2543af61ee3dc268ee3e1760eb68a394..cb96322fb71d0e4301182759fa53c4afdc6b3167 100644 (file)
--- a/README
+++ b/README
@@ -4502,8 +4502,13 @@ This firmware often needs to be loaded during U-Boot booting, so macros
 are used to identify the storage device (NOR flash, SPI, etc) and the address
 within that device.
 
-- CONFIG_SYS_QE_FMAN_FW_ADDR
-       The address in the storage device where the firmware is located.  The
+- CONFIG_SYS_FMAN_FW_ADDR
+       The address in the storage device where the FMAN microcode is located.  The
+       meaning of this address depends on which CONFIG_SYS_QE_FW_IN_xxx macro
+       is also specified.
+
+- CONFIG_SYS_QE_FW_ADDR
+       The address in the storage device where the QE microcode is located.  The
        meaning of this address depends on which CONFIG_SYS_QE_FW_IN_xxx macro
        is also specified.
 
index 19df95fee291efce08543799d23d955f8fab8bef..0b4d8eaff85539d147d514e367c17fbe14ffb33b 100644 (file)
@@ -818,7 +818,7 @@ void cpu_secondary_init_r(void)
 
        /* load QE firmware from NAND flash to DDR first */
        ret = nand_read(&nand_info[0], (loff_t)CONFIG_SYS_QE_FMAN_FW_IN_NAND,
-                       &fw_length, (u_char *)CONFIG_SYS_QE_FMAN_FW_ADDR);
+                       &fw_length, (u_char *)CONFIG_SYS_QE_FW_ADDR);
 
        if (ret && ret == -EUCLEAN) {
                printf ("NAND read for QE firmware at offset %x failed %d\n",
index bca20b3330361690e1aed72d7386b5a6ae3b24a5..400e9dd5e24902bc8ce8bdf2cdecbd9fc8dcc855 100644 (file)
@@ -350,16 +350,16 @@ int fm_init_common(int index, struct ccsr_fman *reg)
 {
        int rc;
 #if defined(CONFIG_SYS_QE_FMAN_FW_IN_NOR)
-       void *addr = (void *)CONFIG_SYS_QE_FMAN_FW_ADDR;
+       void *addr = (void *)CONFIG_SYS_FMAN_FW_ADDR;
 #elif defined(CONFIG_SYS_QE_FMAN_FW_IN_NAND)
        size_t fw_length = CONFIG_SYS_QE_FMAN_FW_LENGTH;
        void *addr = malloc(CONFIG_SYS_QE_FMAN_FW_LENGTH);
 
-       rc = nand_read(&nand_info[0], (loff_t)CONFIG_SYS_QE_FMAN_FW_ADDR,
+       rc = nand_read(&nand_info[0], (loff_t)CONFIG_SYS_FMAN_FW_ADDR,
                       &fw_length, (u_char *)addr);
        if (rc == -EUCLEAN) {
                printf("NAND read of FMAN firmware at offset 0x%x failed %d\n",
-                       CONFIG_SYS_QE_FMAN_FW_ADDR, rc);
+                       CONFIG_SYS_FMAN_FW_ADDR, rc);
        }
 #elif defined(CONFIG_SYS_QE_FW_IN_SPIFLASH)
        struct spi_flash *ucode_flash;
@@ -371,7 +371,7 @@ int fm_init_common(int index, struct ccsr_fman *reg)
        if (!ucode_flash)
                printf("SF: probe for ucode failed\n");
        else {
-               ret = spi_flash_read(ucode_flash, CONFIG_SYS_QE_FMAN_FW_ADDR,
+               ret = spi_flash_read(ucode_flash, CONFIG_SYS_FMAN_FW_ADDR,
                                CONFIG_SYS_QE_FMAN_FW_LENGTH, addr);
                if (ret)
                        printf("SF: read for ucode failed\n");
@@ -381,7 +381,7 @@ int fm_init_common(int index, struct ccsr_fman *reg)
        int dev = CONFIG_SYS_MMC_ENV_DEV;
        void *addr = malloc(CONFIG_SYS_QE_FMAN_FW_LENGTH);
        u32 cnt = CONFIG_SYS_QE_FMAN_FW_LENGTH / 512;
-       u32 blk = CONFIG_SYS_QE_FMAN_FW_ADDR / 512;
+       u32 blk = CONFIG_SYS_FMAN_FW_ADDR / 512;
        struct mmc *mmc = find_mmc_device(CONFIG_SYS_MMC_ENV_DEV);
 
        if (!mmc)
@@ -395,7 +395,7 @@ int fm_init_common(int index, struct ccsr_fman *reg)
                flush_cache((ulong)addr, cnt * 512);
        }
 #elif defined(CONFIG_SYS_QE_FMAN_FW_IN_REMOTE)
-       void *addr = (void *)CONFIG_SYS_QE_FMAN_FW_ADDR;
+       void *addr = (void *)CONFIG_SYS_FMAN_FW_ADDR;
 #else
        void *addr = NULL;
 #endif
index b5ddc4b474d0e89bde1884f6f1bd9db46d1c181d..b1da75ec4d924dc4471c7daabe77fdef81a7fa1c 100644 (file)
@@ -165,7 +165,7 @@ void qe_init(uint qe_base)
        /*
         * Upload microcode to IRAM for those SOCs which do not have ROM in QE.
         */
-       qe_upload_firmware((const void *)CONFIG_SYS_QE_FMAN_FW_ADDR);
+       qe_upload_firmware((const void *)CONFIG_SYS_QE_FW_ADDR);
 
        /* enable the microcode in IRAM */
        out_be32(&qe_immr->iram.iready,QE_IRAM_READY);
index b2483026870f3a8e4ecfcc164ce3be3944504b01..b9ec9573db07e6154fe8d5a2304a41538a5ca0a9 100644 (file)
@@ -596,7 +596,7 @@ unsigned long get_board_ddr_clk(void);
  * env, so we got 0x110000.
  */
 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     0x110000
+#define CONFIG_SYS_FMAN_FW_ADDR        0x110000
 #elif defined(CONFIG_SDCARD)
 /*
  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
@@ -604,10 +604,10 @@ unsigned long get_board_ddr_clk(void);
  * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
  */
 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     (512 * 1130)
+#define CONFIG_SYS_FMAN_FW_ADDR        (512 * 1130)
 #elif defined(CONFIG_NAND)
 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#define CONFIG_SYS_FMAN_FW_ADDR        (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 /*
  * Slave has no ucode locally, it can fetch this from remote. When implementing
@@ -617,10 +617,10 @@ unsigned long get_board_ddr_clk(void);
  * master LAW->the ucode address in master's memory space.
  */
 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     0xFFE00000
+#define CONFIG_SYS_FMAN_FW_ADDR        0xFFE00000
 #else
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
-#define CONFIG_SYS_QE_FMAN_FW_ADDR             0xEFF00000
+#define CONFIG_SYS_FMAN_FW_ADDR                0xEFF00000
 #endif
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x10000
 #define CONFIG_SYS_FDT_PAD             (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
index 58b9c26e93dba0a9c0253d604f32147a62cbac73..5165a456aa1389390d4b5efa2c774ab282aa5929 100644 (file)
@@ -493,7 +493,7 @@ extern unsigned long get_clock_freq(void);
 
 /* QE microcode/firmware address */
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     0xfff00000
+#define CONFIG_SYS_QE_FW_ADDR  0xfff00000
 
 /*
  * BOOTP options
index b41cb4a13efff2291d163f0befaf973997e762a7..d7274f1b684b00cb6af7f99bf9ca65feb76c176a 100644 (file)
@@ -360,7 +360,7 @@ extern unsigned long get_clock_freq(void);
 /* Default address of microcode for the Linux Fman driver */
 /* QE microcode/firmware address */
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     0xEFF00000
+#define CONFIG_SYS_FMAN_FW_ADDR        0xEFF00000
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x10000
 #define CONFIG_SYS_FDT_PAD             (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 
index 2ffa3546de7d39338985f345696a1ec5cbc4a855..0ee75dc4b25283cf5c04c7b5548bbe9ab94dc922 100644 (file)
@@ -500,10 +500,10 @@ extern unsigned long get_clock_freq(void);
 /* Default address of microcode for the Linux Fman driver */
 /* QE microcode/firmware address */
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     0xEFF00000
+#define CONFIG_SYS_FMAN_FW_ADDR        0xEFF00000
 #else
 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     0x1f00000
+#define CONFIG_SYS_FMAN_FW_ADDR        0x1f00000
 #endif
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x10000
 #define CONFIG_SYS_FDT_PAD             (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
index b3880f190f9a481bb503a4faac3c54908f0ae214..f024c29dcd32165501b168b03d91414f9eee49ac 100644 (file)
@@ -506,7 +506,7 @@ unsigned long get_board_sys_clk(unsigned long dummy);
  * env, so we got 0x110000.
  */
 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     0x110000
+#define CONFIG_SYS_FMAN_FW_ADDR        0x110000
 #elif defined(CONFIG_SDCARD)
 /*
  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
@@ -514,10 +514,10 @@ unsigned long get_board_sys_clk(unsigned long dummy);
  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
  */
 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     (512 * 1680)
+#define CONFIG_SYS_FMAN_FW_ADDR        (512 * 1680)
 #elif defined(CONFIG_NAND)
 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#define CONFIG_SYS_FMAN_FW_ADDR        (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 /*
  * Slave has no ucode locally, it can fetch this from remote. When implementing
@@ -527,10 +527,10 @@ unsigned long get_board_sys_clk(unsigned long dummy);
  * master LAW->the ucode address in master's memory space.
  */
 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     0xFFE00000
+#define CONFIG_SYS_FMAN_FW_ADDR        0xFFE00000
 #else
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     0xEFF00000
+#define CONFIG_SYS_FMAN_FW_ADDR        0xEFF00000
 #endif
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x10000
 #define CONFIG_SYS_FDT_PAD             (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
index 993f9ae53364d3c88fe79996d12b4edbc583fff8..84213b8eaf106aa18e079658c09534843090522a 100644 (file)
@@ -602,7 +602,7 @@ unsigned long get_board_ddr_clk(void);
  * env, so we got 0x110000.
  */
 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     0x110000
+#define CONFIG_SYS_FMAN_FW_ADDR        0x110000
 #elif defined(CONFIG_SDCARD)
 /*
  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
@@ -610,13 +610,13 @@ unsigned long get_board_ddr_clk(void);
  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
  */
 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     (512 * 1680)
+#define CONFIG_SYS_FMAN_FW_ADDR        (512 * 1680)
 #elif defined(CONFIG_NAND)
 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#define CONFIG_SYS_FMAN_FW_ADDR        (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #else
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
-#define CONFIG_SYS_QE_FMAN_FW_ADDR             0xEFF00000
+#define CONFIG_SYS_FMAN_FW_ADDR                0xEFF00000
 #endif
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x10000
 #define CONFIG_SYS_FDT_PAD             (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
index 395845bd68d1889d094eba4c75f217699935dc4f..7420db921e75db0a7692c6bc1215dd4a957c211c 100644 (file)
  * env, so we got 0x110000.
  */
 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     0x110000
+#define CONFIG_SYS_FMAN_FW_ADDR        0x110000
 #elif defined(CONFIG_SDCARD)
 /*
  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
  */
 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     (512 * 1680)
+#define CONFIG_SYS_FMAN_FW_ADDR        (512 * 1680)
 #elif defined(CONFIG_NAND)
 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     (4 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#define CONFIG_SYS_FMAN_FW_ADDR        (4 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #else
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
-#define CONFIG_SYS_QE_FMAN_FW_ADDR             0xEFF00000
+#define CONFIG_SYS_FMAN_FW_ADDR                0xEFF00000
 #endif
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x10000
 #define CONFIG_SYS_FDT_PAD             (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
index 68656e6ef15fc4e1d9efa7ae49e8b4f36970f4e9..a2af6b02e10379adc837a0a05055e081bfc460e5 100644 (file)
  * env, so we got 0x110000.
  */
 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     0x110000
+#define CONFIG_SYS_FMAN_FW_ADDR        0x110000
 #elif defined(CONFIG_SDCARD)
 /*
  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
  */
 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     (512 * 1680)
+#define CONFIG_SYS_FMAN_FW_ADDR        (512 * 1680)
 #elif defined(CONFIG_NAND)
 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     (4 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#define CONFIG_SYS_FMAN_FW_ADDR        (4 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #else
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
-#define CONFIG_SYS_QE_FMAN_FW_ADDR             0xEFF00000
+#define CONFIG_SYS_FMAN_FW_ADDR                0xEFF00000
 #endif
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x10000
 #define CONFIG_SYS_FDT_PAD             (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
index 399ddbb791cee82480c4f7a9761b2be8998964f8..04527e3ec5c9884b84c2b90f6db40dd02881773c 100644 (file)
@@ -552,7 +552,7 @@ unsigned long get_board_ddr_clk(void);
  * env, so we got 0x110000.
  */
 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     0x110000
+#define CONFIG_SYS_FMAN_FW_ADDR        0x110000
 #elif defined(CONFIG_SDCARD)
 /*
  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
@@ -560,10 +560,10 @@ unsigned long get_board_ddr_clk(void);
  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
  */
 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     (512 * 1680)
+#define CONFIG_SYS_FMAN_FW_ADDR        (512 * 1680)
 #elif defined(CONFIG_NAND)
 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#define CONFIG_SYS_FMAN_FW_ADDR        (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 /*
  * Slave has no ucode locally, it can fetch this from remote. When implementing
@@ -573,10 +573,10 @@ unsigned long get_board_ddr_clk(void);
  * master LAW->the ucode address in master's memory space.
  */
 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     0xFFE00000
+#define CONFIG_SYS_FMAN_FW_ADDR        0xFFE00000
 #else
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     0xEFF00000
+#define CONFIG_SYS_FMAN_FW_ADDR        0xEFF00000
 #endif
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x10000
 #define CONFIG_SYS_FDT_PAD             (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
index 743eee3161c60c4ed2add576c0cf7c52a25dacb5..66f8a4ce8f225ba34177796561a2b96d8eb25f75 100644 (file)
@@ -510,7 +510,7 @@ unsigned long get_board_ddr_clk(void);
  * env, so we got 0x110000.
  */
 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     0x110000
+#define CONFIG_SYS_FMAN_FW_ADDR        0x110000
 #define CONFIG_CORTINA_FW_ADDR         0x120000
 
 #elif defined(CONFIG_SDCARD)
@@ -520,12 +520,12 @@ unsigned long get_board_ddr_clk(void);
  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
  */
 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     (512 * 1680)
+#define CONFIG_SYS_FMAN_FW_ADDR        (512 * 1680)
 #define CONFIG_CORTINA_FW_ADDR         (512 * 1808)
 
 #elif defined(CONFIG_NAND)
 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     (6 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#define CONFIG_SYS_FMAN_FW_ADDR        (6 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #define CONFIG_CORTINA_FW_ADDR         (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 /*
@@ -536,11 +536,11 @@ unsigned long get_board_ddr_clk(void);
  * master LAW->the ucode address in master's memory space.
  */
 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     0xFFE00000
+#define CONFIG_SYS_FMAN_FW_ADDR        0xFFE00000
 #define CONFIG_CORTINA_FW_ADDR         0xFFE10000
 #else
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     0xEFF00000
+#define CONFIG_SYS_FMAN_FW_ADDR        0xEFF00000
 #define CONFIG_CORTINA_FW_ADDR         0xEFE00000
 #endif
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x10000
index c81c4577e3aba68dbb427102ce9cf383c119cef9..ad5a9a6f0c8533c4374d22e118e5cf50da10f0c9 100644 (file)
@@ -98,7 +98,7 @@
 #define CONFIG_SYS_INTERLAKEN
 
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
-#define CONFIG_SYS_QE_FMAN_FW_ADDR             0xEFF00000
+#define CONFIG_SYS_FMAN_FW_ADDR                0xEFF00000
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x10000
 #define CONFIG_SYS_FDT_PAD             (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 
index 56e1293720c4f1e85dd3e30819a85f8f25e98c3a..1b98cfda3eca732696e4034c2bda8d1d5f50ea69 100644 (file)
@@ -375,7 +375,7 @@ unsigned long get_board_ddr_clk(void);
  * env, so we got 0x110000.
  */
 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     0x110000
+#define CONFIG_SYS_FMAN_FW_ADDR        0x110000
 #elif defined(CONFIG_SDCARD)
 /*
  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
@@ -383,10 +383,10 @@ unsigned long get_board_ddr_clk(void);
  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
  */
 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     (512 * 1680)
+#define CONFIG_SYS_FMAN_FW_ADDR        (512 * 1680)
 #elif defined(CONFIG_NAND)
 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#define CONFIG_SYS_FMAN_FW_ADDR        (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 /*
  * Slave has no ucode locally, it can fetch this from remote. When implementing
@@ -396,10 +396,10 @@ unsigned long get_board_ddr_clk(void);
  * master LAW->the ucode address in master's memory space.
  */
 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     0xFFE00000
+#define CONFIG_SYS_FMAN_FW_ADDR        0xFFE00000
 #else
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
-#define CONFIG_SYS_QE_FMAN_FW_ADDR             0xEFF00000
+#define CONFIG_SYS_FMAN_FW_ADDR                0xEFF00000
 #endif
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x10000
 #define CONFIG_SYS_FDT_PAD             (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
index 1e4bfc49fc92b3875cb5354cdf3ec0d5f91e78c2..ca14558357ac5ac58f37e8b4e2727a3a40a65e2a 100644 (file)
  * env, so we got 0x110000.
  */
 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     0x110000
+#define CONFIG_SYS_FMAN_FW_ADDR        0x110000
 #elif defined(CONFIG_SDCARD)
 /*
  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
  */
 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     (512 * 1680)
+#define CONFIG_SYS_FMAN_FW_ADDR        (512 * 1680)
 #elif defined(CONFIG_NAND)
 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#define CONFIG_SYS_FMAN_FW_ADDR        (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 /*
  * Slave has no ucode locally, it can fetch this from remote. When implementing
  * master LAW->the ucode address in master's memory space.
  */
 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     0xFFE00000
+#define CONFIG_SYS_FMAN_FW_ADDR        0xFFE00000
 #else
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
-#define CONFIG_SYS_QE_FMAN_FW_ADDR             0xEFF00000
+#define CONFIG_SYS_FMAN_FW_ADDR                0xEFF00000
 #endif
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x10000
 #define CONFIG_SYS_FDT_PAD             (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
index 29c6f60971aa0776d0e841aacaf19f061bc8484f..c8df23b534ec32db750a8c18320243c7dbdabcc7 100644 (file)
@@ -27,7 +27,7 @@
 /* QE microcode/firmware address */
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 /* at end of uboot partition, before env */
-#define CONFIG_SYS_QE_FMAN_FW_ADDR   0xF00B0000
+#define CONFIG_SYS_QE_FW_ADDR   0xF00B0000
 
 /*
  * System IO Config
index 582978afe206b645c43aaa9e297390d3317dd82e..418e3d129818f48b6dc8a9f935ef607967ebe6f4 100644 (file)
@@ -350,7 +350,7 @@ int get_scl(void);
  * ucode is stored after env, so we got 0x120000.
  */
 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     0x120000
+#define CONFIG_SYS_FMAN_FW_ADDR        0x120000
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x10000
 #define CONFIG_SYS_FDT_PAD             (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 
index 07b61795bb9efa587a0159431e394acef141b7fc..d3a792adf80b9c133905e4d55b5d799276ebc3dc 100644 (file)
 #ifdef CONFIG_QE
 /* QE microcode/firmware address */
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     0xefec0000
+#define CONFIG_SYS_QE_FW_ADDR  0xefec0000
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x10000
 #endif /* CONFIG_QE */
 
index c296a0759947f2c1081cd91a931302ae10092805..97ec593c207ac25ae237035f2cd94a67d824e445 100644 (file)
@@ -348,7 +348,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #ifdef CONFIG_QE
 /* QE microcode/firmware address */
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     0xefec0000
+#define CONFIG_SYS_QE_FW_ADDR  0xefec0000
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x10000
 #endif /* CONFIG_QE */