]> git.sur5r.net Git - u-boot/log
u-boot
20 years agoUpdate AR405 board.
stroese [Thu, 16 Sep 2004 12:34:51 +0000 (12:34 +0000)]
Update AR405 board.

20 years agoesd misc file esd common routines added.
stroese [Thu, 16 Sep 2004 12:33:54 +0000 (12:33 +0000)]
esd misc file esd common routines added.

20 years agoFix SysClk handling for PPChameleon and CATcenter boards
wdenk [Thu, 9 Sep 2004 17:44:35 +0000 (17:44 +0000)]
Fix SysClk handling for PPChameleon and CATcenter boards

20 years ago* Patch by Detlev Zundel, 08 Sep 2004: LABEL_2004_09_09_0000
wdenk [Wed, 8 Sep 2004 22:03:11 +0000 (22:03 +0000)]
* Patch by Detlev Zundel, 08 Sep 2004:
  Update etags build target

* Improve NetConsole support: add support for broadcast destination
  address and buffered input.

* Cleanup compiler warnings for GCC 3.3.x and later

* Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch

20 years agoAdd support for IDS "NC650" board LABEL_2004_08_29_0045
wdenk [Sat, 28 Aug 2004 22:45:57 +0000 (22:45 +0000)]
Add support for IDS "NC650" board

20 years ago* Add automatic update support for LWMON board LABEL_2004_08_28_2355
wdenk [Sat, 28 Aug 2004 21:09:14 +0000 (21:09 +0000)]
* Add automatic update support for LWMON board

* Enable MSDOS/VFAT filesystem support for LWMON board

* Clear Block Lock-Bits when erasing flash on LWMON board.

* Fix return code of "fatload" command

* Disable debugging for TQM5200 board

20 years ago* Patch by Martin Krause, 03 Aug 2004:
wdenk [Wed, 4 Aug 2004 21:56:49 +0000 (21:56 +0000)]
* Patch by Martin Krause, 03 Aug 2004:
  change timing for SM501 graphics controller on TQM5200 module

* Patch by Mark Jonas, 13 July 2004:
  - Total5200 LCD now run in little endian mode. Endianess conversion
    is done in hardware.
  - Removed last reference to "console" environment variable.

20 years agoPatches by Lars Munch, 12 Jul 2004:
wdenk [Mon, 2 Aug 2004 23:39:03 +0000 (23:39 +0000)]
Patches by Lars Munch, 12 Jul 2004:
- move at45.c to board/at91rm9200dk/ since this is at91rm9200dk
  board specific
- split out the LXT971A PHY from ns_9750_eth.h
- split the dm9161 phy part out of at91rm9200_ether.c

20 years ago* Patch by Andreas Engel, 12 Jul 2004:
wdenk [Mon, 2 Aug 2004 23:22:59 +0000 (23:22 +0000)]
* Patch by Andreas Engel, 12 Jul 2004:
  Replaced hardcoded PL011 clock frequency with config variable.
  Fixed wrong CONFIG_CMD_DFL doc.

* Patch by Thomas Viehweger, 09 Jun 2004:
  make it possible to remove chpart when there is only one partition

20 years agoAdd support for console over UDP (compatible to Ingo Molnar's
wdenk [Mon, 2 Aug 2004 21:11:11 +0000 (21:11 +0000)]
Add support for console over UDP (compatible to Ingo Molnar's
netconsole patch under Linux)

20 years agoPatch by Jon Loeliger, 16 Jul 2004:
wdenk [Sun, 1 Aug 2004 23:02:45 +0000 (23:02 +0000)]
Patch by Jon Loeliger, 16 Jul 2004:
- support larger DDR memories up to 2G on the PC8540/8560ADS and
  STXGP3 boards
- Made MPC8540/8560ADS be 33Mhz PCI by default.
- Removed moldy CONFIG_RAM_AS_FLASH, CFG_FLASH_PORT_WIDTH_16
  and CONFIG_L2_INIT_RAM options.
- Refactor Local Bus initialization out of SDRAM setup.
- Re-implement new version of LBC11/DDR11 errata workarounds.
- Moved board specific PCI init parts out of CPU directory.
- Added TLB entry for PCI-1 IO Memory
- Updated README.mpc85xxads

20 years ago* Code cleanup
wdenk [Sun, 1 Aug 2004 22:48:16 +0000 (22:48 +0000)]
* Code cleanup

* Patch by Sascha Hauer, 28 Jun:
  - add generic support for Motorola i.MX architecture
  - add support for mx1ads, mx1fs2 and scb9328 boards

* Patches by Marc Leeman, 23 Jul 2004:
  - Add define for the PCI/Memory Buffer Configuration Register
  - corrected comments in cpu/mpc824x/cpu_init.c

* Add support for multiple serial interfaces
  (for example to allow modem dial-in / dial-out)

20 years ago* Fix NSCU config; add ethernet wakeup code.
wdenk [Sun, 1 Aug 2004 13:09:47 +0000 (13:09 +0000)]
* Fix NSCU config; add ethernet wakeup code.

* Add link for preloader for Motorola Coldfire to RAEDME.m68k

20 years agoPatch by Stefan Roese, 15 Jul 2004
stroese [Thu, 15 Jul 2004 14:41:43 +0000 (14:41 +0000)]
Patch by Stefan Roese, 15 Jul 2004

20 years agocpu/ppc4xx/sdram.c rewritten now using get_ram_size()
stroese [Thu, 15 Jul 2004 14:41:13 +0000 (14:41 +0000)]
cpu/ppc4xx/sdram.c rewritten now using get_ram_size()

20 years agoPatch by Michael Bendzick, 12 Jul 2004:
wdenk [Mon, 12 Jul 2004 22:34:51 +0000 (22:34 +0000)]
Patch by Michael Bendzick, 12 Jul 2004:
fix output formatting in drivers/cfi_flash.c

20 years agoPatch by Mark Jonas, 02 Jul 2004:
wdenk [Mon, 12 Jul 2004 14:37:59 +0000 (14:37 +0000)]
Patch by Mark Jonas, 02 Jul 2004:
Fix lowboot (again) on MPC5xxx

20 years agoAdd cerf250 to MAINTAINERS and README
wdenk [Sun, 11 Jul 2004 22:37:59 +0000 (22:37 +0000)]
Add cerf250 to MAINTAINERS and README

20 years agoPatch by Curt Brune, 07 Jul 2004:
wdenk [Sun, 11 Jul 2004 22:27:55 +0000 (22:27 +0000)]
Patch by Curt Brune, 07 Jul 2004:
relocate exception vectors on arm720t if needed

20 years ago* Patch by George G. Davis, 06 Jul 2004:
wdenk [Sun, 11 Jul 2004 22:19:26 +0000 (22:19 +0000)]
* Patch by George G. Davis, 06 Jul 2004:
  - update mach-types.h to latest arm.linux.org.uk master list
  - Set correct OMAP1610 bi_arch_number for build target

* Patch by Curt Brune, 06 Jul 2004:
  evb4510: add support for timer interrupt; cleanup

20 years ago* Patch by Dan Poirot, 06 Jul 2004:
wdenk [Sun, 11 Jul 2004 21:49:42 +0000 (21:49 +0000)]
* Patch by Dan Poirot, 06 Jul 2004:
  Fix sbc8260 environment variables

* Cleanup redundand "console" environment variable

20 years ago* Cleanup
wdenk [Sun, 11 Jul 2004 20:04:51 +0000 (20:04 +0000)]
* Cleanup

* Patch by Mark Jonas, 05 Jul 2004:
  add support for the Total5100's and Total5200's LCD screen

* Patches by Dan Eisenhut, 01 Jul 2004:
  - README fixes.
  - Move doc2000.h include to prevent compiler warning on some boards

20 years agoPatch by Mark Jonas, 01 Jul 2004:
wdenk [Sun, 11 Jul 2004 19:17:20 +0000 (19:17 +0000)]
Patch by Mark Jonas, 01 Jul 2004:
Added support for Total5100 and Total5200 (Rev.1 and Rev.2)
MGT5100 and MPC5200 based Freescale platforms.

20 years ago* Patch by Philippe Robin, 01 Jul 2004:
wdenk [Sun, 11 Jul 2004 18:10:30 +0000 (18:10 +0000)]
* Patch by Philippe Robin, 01 Jul 2004:
  Add initialization for Integrator and versatile board files.

* Patch by Hinko Kocevar, 01 Jun 2004:
  Fix VFD FB allocation, add LCD FB allocation on ARM

20 years ago* Patch by Martin Krause, 30 Jun 2004:
wdenk [Sun, 11 Jul 2004 17:40:54 +0000 (17:40 +0000)]
* Patch by Martin Krause, 30 Jun 2004:
  Add support for TQM5200 board

* Patch by Martin Krause, 29 Jun 2004:
  Add loopw command: infinite write loop on address range

20 years agoPatches by Yasushi Shoji, 29 Jun 2004:
wdenk [Sat, 10 Jul 2004 23:48:41 +0000 (23:48 +0000)]
Patches by Yasushi Shoji, 29 Jun 2004:
- add empty include/asm-microblaze/processor.h
- add to CREDITS and MAINTAINERS
- add gd initialization
- add MicroBlaze and SUZAKU board to MAKEALL script
- add reset support for SUZAKU
- add flush_cache() for MicroBlaze
- add CFG_FLASH_SIZE to include/configs/suzaku.h since we have fixed
  size flash memory on SUZAKU

20 years ago* Patch by Prakash Kumar, 27 Jun 2004:
wdenk [Sat, 10 Jul 2004 23:11:10 +0000 (23:11 +0000)]
* Patch by Prakash Kumar, 27 Jun 2004:
  Add support for the PXA250 based Intrinsyc Cerf board.

* Patch by Yasushi Shoji, 27 Jun 2004:
  fix comment in include/common.h

20 years agoFix swapped config files.
wdenk [Sat, 10 Jul 2004 23:02:23 +0000 (23:02 +0000)]
Fix swapped config files.

20 years ago* Rename SBC8560 into sbc8560 for consistency
wdenk [Sat, 10 Jul 2004 22:35:59 +0000 (22:35 +0000)]
* Rename SBC8560 into sbc8560 for consistency

* Patch by Daniel Poirot, 24 Jun 2004:
  Add support for Wind River's sbc8240 board

* Patches by Yasushi Shoji, 26 Jun 2004:
  - drivers/serial_xuartlite.c: fix "return 0" in void function
  - add microblaze support to mkimage tool

20 years ago* Patch by Fred Klatt, 25 Jun 2004:
wdenk [Sat, 10 Jul 2004 21:45:47 +0000 (21:45 +0000)]
* Patch by Fred Klatt, 25 Jun 2004:
  Add support for WindRiver's SBC8560 board

* Patch by Nicolas Lacressonniere, 24 Jun 2004
  Small Bugs fixes for "at91rm9200dk" board:
  - Timing modifications for SPI DataFlash access
  - Fix NAND flash detection bug

* Patch by Nicolas Lacressonniere, 24 Jun 2004:
  Add Support for Flash AT49BV6416 for AT91RM9200DK board

20 years agoPatch by Jon Loeliger, 17 June 2004:
wdenk [Fri, 9 Jul 2004 23:27:13 +0000 (23:27 +0000)]
Patch by Jon Loeliger, 17 June 2004:
Completion of the 8540ADS/8560ADS updates:
Fix some PCI and Rapid I/O memory maps,
Initialize both TSEC 1 and 2,
Initialize SDRAM
Update MAINTAINER for 85xx boards and README.mpc85xxads

20 years ago* Patch by Yuli Barcohen, 16 Jun 2004:
wdenk [Fri, 9 Jul 2004 22:51:01 +0000 (22:51 +0000)]
* Patch by Yuli Barcohen, 16 Jun 2004:
  Remove obsolete AdderII port which was superseded by unified
  AdderII/Adder87x port

* Patch by Ladislav Michl, 16 Jun 2004:
  Fix gcc-3.3.3 warnings for smc91111.c

20 years agoPatch by Stefan Roese, 02 Jul 2004
stroese [Fri, 2 Jul 2004 14:38:26 +0000 (14:38 +0000)]
Patch by Stefan Roese, 02 Jul 2004

20 years agoFix problem in 405 i2c driver; don't try to print without console!
stroese [Fri, 2 Jul 2004 14:37:04 +0000 (14:37 +0000)]
Fix problem in 405 i2c driver; don't try to print without console!

20 years agoFix bug in 405 ethernet driver; allocated data not cleared!
stroese [Fri, 2 Jul 2004 14:36:35 +0000 (14:36 +0000)]
Fix bug in 405 ethernet driver; allocated data not cleared!

20 years agoPatch by Paul Ruhland, 11 Jun 2004:
wdenk [Thu, 1 Jul 2004 22:02:29 +0000 (22:02 +0000)]
Patch by Paul Ruhland, 11 Jun 2004:
Remove debug code from 'board/lpd7a40x/flash.c'

20 years agoPatch by Andrea Marson, 11 Jun 2004:
wdenk [Thu, 1 Jul 2004 21:40:08 +0000 (21:40 +0000)]
Patch by Andrea Marson, 11 Jun 2004:
Update for PPChameleon board:
- support for SysClk @ 25MHz
- support for Silicon Motion SM712 VGA controller
- some clean ups

20 years ago* Patches by Richard Woodruff, 10 Jun 2004:
wdenk [Thu, 1 Jul 2004 20:28:03 +0000 (20:28 +0000)]
* Patches by Richard Woodruff, 10 Jun 2004:
  - fix problems with examples/stubs.c for GCC >= 3.4
  - fix problems with gd initialization

* Enable FAT filesystem support for HMI10 board

20 years ago* Code cleanup (ARM mostly)
wdenk [Thu, 1 Jul 2004 16:30:44 +0000 (16:30 +0000)]
* Code cleanup (ARM mostly)

* Patch by Curt Brune, 17 May 2004:
  - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
  - Add support for ESPD-Inc. EVB4510 Board

20 years ago* Fix "cls" command when used with splash screen LABEL_2004_07_01_1200
wdenk [Wed, 30 Jun 2004 22:59:18 +0000 (22:59 +0000)]
* Fix "cls" command when used with splash screen

* Increase NFS download timeout (now 1 min - 10 sec is to short for a
  slow download of a big image)

20 years agoAdd "cls" function to MPC823 LCD driver so we can reinitialize the
wdenk [Fri, 25 Jun 2004 23:35:58 +0000 (23:35 +0000)]
Add "cls" function to MPC823 LCD driver so we can reinitialize the
display even after showing a bitmap

20 years agoAdd MicroSys maintainer. LABEL_2004_06_24_1800
wdenk [Thu, 24 Jun 2004 15:54:37 +0000 (15:54 +0000)]
Add MicroSys maintainer.

20 years agoPatch by Josef Wagner, 04 Jun 2004:
wdenk [Sat, 19 Jun 2004 21:19:10 +0000 (21:19 +0000)]
Patch by Josef Wagner, 04 Jun 2004:
- DDR Ram support for PM520 (MPC5200)
- support for different flash types (PM520)
- USB / IDE / CF-Card / DiskOnChip support for PM520
- 8 bit boot rom support for PM520/CE520
- Add auto SDRAM module detection for MicroSys CPC45 board (MPC8245)
- I2C and RTC support for CPC45
- support of new flash type (28F160C3T) for CPC45

20 years ago* Fix flash parameters passed to Linux for PPChameleon board
wdenk [Thu, 17 Jun 2004 18:50:45 +0000 (18:50 +0000)]
* Fix flash parameters passed to Linux for PPChameleon board

* Remove eth_init() from lib_arm/board.c; it's done in net.net.c.

20 years ago* Patch by Paul Ruhland, 10 Jun 2004:
wdenk [Thu, 10 Jun 2004 21:55:33 +0000 (21:55 +0000)]
* Patch by Paul Ruhland, 10 Jun 2004:
  fix support for Logic SDK-LH7A404 board and clean up the
  LH7A404 register macros.

* Patch by Matthew McClintock, 10 Jun 2004:
  Modify code to select correct serial clock on Sandpoint8245

20 years ago* Patch by Robert Schwebel, 10 Jun 2004:
wdenk [Thu, 10 Jun 2004 21:34:36 +0000 (21:34 +0000)]
* Patch by Robert Schwebel, 10 Jun 2004:
  Add support for Intel K3 strata flash.

* Some cleanup

* Patch by Thomas Brand, 10 Jun 2004:
  Fix "loads" command on DK1S10 board

20 years agoRemove duplicate entry
wdenk [Wed, 9 Jun 2004 22:52:57 +0000 (22:52 +0000)]
Remove duplicate entry

20 years agoPatch by Yuli Barcohen, 09 Jun 2004:
wdenk [Wed, 9 Jun 2004 21:54:22 +0000 (21:54 +0000)]
Patch by Yuli Barcohen, 09 Jun 2004:
Add support for 8MB flash SIMM and JFFS2 file system on
Motorola FADS board and its derivatives (MPC86xADS, MPC885ADS).

20 years ago* Patch by Yuli Barcohen, 09 Jun 2004:
wdenk [Wed, 9 Jun 2004 21:50:45 +0000 (21:50 +0000)]
* Patch by Yuli Barcohen, 09 Jun 2004:
  Add support for Analogue&Micro Adder87x and the older AdderII board.

* Patch by Ming-Len Wu, 09 Jun 2004:
  Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board

20 years agoPatch by Sam Song, 09 Jun 2004:
wdenk [Wed, 9 Jun 2004 21:04:48 +0000 (21:04 +0000)]
Patch by Sam Song, 09 Jun 2004:
- Add support for RPXlite_DW board
- Update FLASH driver for 4*AM29DL323DB90VI
- Add option configuration of CFG_ENV_IS_IN_NVRAM on RPXlite_DW board

20 years ago* Patch by Mark Jonas, 08 June 2004:
wdenk [Wed, 9 Jun 2004 17:45:32 +0000 (17:45 +0000)]
* Patch by Mark Jonas, 08 June 2004:
  - Make MPC5200 boards evaluate the SVR to print processor name and
    version in checkcpu() (cpu/mpc5xxx/cpu.c).

* Patch by Kai-Uwe Bloem, 06 May 2004:
  Fix endianess problem in cramfs code

20 years ago* Patch by Tom Armistead, 04 Jun 2004:
wdenk [Wed, 9 Jun 2004 17:34:58 +0000 (17:34 +0000)]
* Patch by Tom Armistead, 04 Jun 2004:
  Add support for MAX6900 RTC

* Patches by Ladislav Michl, 03 Jun 2004:
  - fix cfi_flash.c on LE systems
  - let 'make mrproper' delete u-boot.img as well
  - turn printf into debug in cfi_flash.c

20 years agoPatch by Kurt Stremerch, 28 May 2004:
wdenk [Wed, 9 Jun 2004 15:37:23 +0000 (15:37 +0000)]
Patch by Kurt Stremerch, 28 May 2004:
Add support for Exys XSEngine board

Some code cleanup.

20 years ago* Patch by Martin Krause, 27 May 2004:
wdenk [Wed, 9 Jun 2004 15:29:49 +0000 (15:29 +0000)]
* Patch by Martin Krause, 27 May 2004:
  Fix a MPC5xxx I2C timing issue in i2c_probe().

* Patch by Leif Lindholm, 27 May 2004:
  Fix board_init_f() for dbau1x00 board.

20 years ago* Patch by Imre Deak, 26 May 2004:
wdenk [Wed, 9 Jun 2004 15:25:53 +0000 (15:25 +0000)]
* Patch by Imre Deak, 26 May 2004:
  On OMAP1610 platforms check if booting from RAM(CS0) or flash(CS3).
  Set flash base accordingly, and decide whether to do or skip board
  specific setup steps.

* Patch by Josef Baumgartner, 26 May 2004:
  Add missing define in include/asm-m68k/global_data.h

20 years ago* Patch by Josef Baumgartner, 25 May 2004:
wdenk [Wed, 9 Jun 2004 15:24:18 +0000 (15:24 +0000)]
* Patch by Josef Baumgartner, 25 May 2004:
  Add missing functions get_ticks() and get_tbclk() in lib_m68k/time.c

* Patch by Paul Ruhland, 24 May 2004:
  fix SDRAM initialization for LPD7A400 board.

20 years agoPatch by Jian Zhang, 20 May 2004:
wdenk [Wed, 9 Jun 2004 14:58:14 +0000 (14:58 +0000)]
Patch by Jian Zhang, 20 May 2004:
add support for environment in NAND flash

20 years agoPatch by Yuli Barcohen, 20 May 2004:
wdenk [Wed, 9 Jun 2004 14:47:54 +0000 (14:47 +0000)]
Patch by Yuli Barcohen, 20 May 2004:
Add support for Interphase iSPAN boards.

20 years ago* Patch by Paul Ruhland, 17 May 2004:
wdenk [Wed, 9 Jun 2004 13:37:52 +0000 (13:37 +0000)]
* Patch by Paul Ruhland, 17 May 2004:
  - Add support for the Logic Zoom LH7A40x based SDK board(s),
    specifically the LPD7A400.

* Patches by Robert Schwebel, 15 May 2004:
  - call MAC address reading code also for SMSC91C111;
  - make SMSC91C111 timeout configurable, remove duplicate code
  - fix get_timer() for PXA
  - update doc/README.JFFS2
  - use "bootfile" env variable also for jffs2

20 years agoPatch by Tolunay Orkun, 14 May 2004:
wdenk [Wed, 9 Jun 2004 12:47:02 +0000 (12:47 +0000)]
Patch by Tolunay Orkun, 14 May 2004:
Add support for Cogent CSB472 board (8MB Flash Rev)

20 years agoPatch by Thomas Viehweger, 14 May 2004:
wdenk [Wed, 9 Jun 2004 12:42:26 +0000 (12:42 +0000)]
Patch by Thomas Viehweger, 14 May 2004:
- flash.h: more flash types added
- immap_8260.h: some bits added (useful for RMII)
- cmd_coninfo.c: typo corrected, printf -> puts
- reduced size by replacing spaces with tab

20 years agoPatch by Robert Schwebel, 13 May 2004:
wdenk [Wed, 9 Jun 2004 10:15:00 +0000 (10:15 +0000)]
Patch by Robert Schwebel, 13 May 2004:
Add 'imgextract' command: extract one part of a multi file image.

20 years agoPatches by Jon Loeliger, 11 May 2004:
wdenk [Wed, 9 Jun 2004 00:51:50 +0000 (00:51 +0000)]
Patches by Jon Loeliger, 11 May 2004:
(partially, as they contained a lot of crap)

20 years agoPatches Part 1 by Jon Loeliger, 11 May 2004:
wdenk [Wed, 9 Jun 2004 00:34:46 +0000 (00:34 +0000)]
Patches Part 1 by Jon Loeliger, 11 May 2004:
Dynamically handle REV1 and REV2 MPC85xx parts.
  (Jon Loeliger, 10-May-2004).
New consistent memory map and Local Access Window across MPC85xx line.
New CCSRBAR at 0xE000_0000 now.
Add RAPID I/O memory map.
New memory map in README.MPC85xxads
  (Kumar Gala, 10-May-2004)
Better board and CPU identification on MPC85xx boards at boot.
  (Jon Loeliger, 10-May-2004)
SDRAM clock control fixes on MPC8540ADS & MPC8560 boards.
Some configuration options for MPC8540ADS & MPC8560ADS cleaned up.
  (Jim Robertson, 10-May-2004)
Rewrite of the MPC85xx Three Speed Ethernet Controller (TSEC) driver.
Supports multiple PHYs.
  (Andy Fleming, 10-May-2004)
Some README.MPC85xxads updates.
  (Kumar Gala, 10-May-2004)
Copyright updates for "Freescale"
  (Andy Fleming, 10-May-2004)

20 years agoPatch by Stephen Williams, 11 May 2004:
wdenk [Wed, 9 Jun 2004 00:15:33 +0000 (00:15 +0000)]
Patch by Stephen Williams, 11 May 2004:
Add flash support for ST M29W040B
Reduce JSE specific flash.c to remove dead code.

20 years agoPatch by Markus Pietrek, 04 May 2004:
wdenk [Wed, 9 Jun 2004 00:10:59 +0000 (00:10 +0000)]
Patch by Markus Pietrek, 04 May 2004:
Fix clear_bss code for ARM systems (all except s3c44b0 which
doesn't clear BSS at all?)

20 years ago* Patch by Rishi Bhattacharya, 08 May 2004:
wdenk [Tue, 8 Jun 2004 00:22:43 +0000 (00:22 +0000)]
* Patch by Rishi Bhattacharya, 08 May 2004:
  Add support for TI OMAP5912 OSK Board

* Patch by Sam Song May, 07 May 2004:
  Fix typo of UPM table for rmu board

20 years agoPatch by Pantelis Antoniou, 5 May 2004:
wdenk [Mon, 7 Jun 2004 23:46:25 +0000 (23:46 +0000)]
Patch by Pantelis Antoniou, 5 May 2004:
- Intracom board update.
- Add Codec POST.

20 years agoAdd support for the second Ethernet interface for the 'PPChameleon' board.
wdenk [Sun, 6 Jun 2004 23:53:59 +0000 (23:53 +0000)]
Add support for the second Ethernet interface for the 'PPChameleon' board.

20 years ago* Patch by Dave Peverley, 30 Apr 2004:
wdenk [Sun, 6 Jun 2004 23:13:55 +0000 (23:13 +0000)]
* Patch by Dave Peverley, 30 Apr 2004:
  Add support for OMAP730 Perseus2 Development board

* Patch by Alan J. Luse, 29 Apr 2004:
  Fix flash chip-select (OR0) option register setting on FADS boards.

* Patch by Alan J. Luse, 29 Apr 2004:
  Report MII network speed and duplex setting properly when
  auto-negotiate is not enabled.

* Patch by Jarrett Redd, 29 Apr 2004:
  Fix hang on reset on Ocotea board due to flash in wrong mode.

20 years agoPatch by Dave Peverley, 29 Apr 2004:
wdenk [Sun, 6 Jun 2004 22:11:41 +0000 (22:11 +0000)]
Patch by Dave Peverley, 29 Apr 2004:
add MAC address detection to smc91111 driver

20 years agoPatch by Tolunay Orkun, 20 Apr 2004:
wdenk [Sun, 6 Jun 2004 21:51:03 +0000 (21:51 +0000)]
Patch by Tolunay Orkun, 20 Apr 2004:
- README update: add CONFIG_CSB272 and csb272_config
- add descriptions for some MII/PHY options, CONFIG_I2CFAST, and
  i2cfast environment variable

20 years agoPatch by Yuli Barcohen, 19 Apr 2004:
wdenk [Sun, 6 Jun 2004 21:35:06 +0000 (21:35 +0000)]
Patch by Yuli Barcohen, 19 Apr 2004:
- Rename DUET_ADS to MPC885ADS
- Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
- Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
- Clean up FADS family port to use the new defines

20 years agoFix text alignment
wdenk [Tue, 1 Jun 2004 21:15:28 +0000 (21:15 +0000)]
Fix text alignment

20 years agoFix PCI support on CPC45 board
wdenk [Tue, 1 Jun 2004 21:08:17 +0000 (21:08 +0000)]
Fix PCI support on CPC45 board

20 years agoFix CONFIG_ETH*ADDR for Ocotea board. LABEL_2004_05_29_1850
wdenk [Sat, 29 May 2004 16:53:29 +0000 (16:53 +0000)]
Fix CONFIG_ETH*ADDR for Ocotea board.
Sort Makefile.
Update docs.

20 years agoPatch by Scott McNutt, 25 Apr 2004: LABEL_2004_05_19_2335
wdenk [Wed, 19 May 2004 21:33:14 +0000 (21:33 +0000)]
Patch by Scott McNutt, 25 Apr 2004:
Add Nios GDB/JTAG Console support:
- Add stubs to support gdb via JTAG.
- Add support for console over JTAG.
- Minor cleanup.

20 years agoAdd support for CATcenter board (based on PPChameleon ME module)
wdenk [Thu, 13 May 2004 13:23:58 +0000 (13:23 +0000)]
Add support for CATcenter board (based on PPChameleon ME module)

20 years agoPatch by Klaus Heydeck, 12 May 2004:
wdenk [Wed, 12 May 2004 22:54:36 +0000 (22:54 +0000)]
Patch by Klaus Heydeck, 12 May 2004:
Using external watchdog for KUP4 boards in mpc8xx/cpu.c;
load_sernum_ethaddr() for KUP4 boards in lib_ppc/board.c;
various changes to KUP4 board specific files

20 years agoFix minor network problem on MPC5200
wdenk [Wed, 12 May 2004 22:18:31 +0000 (22:18 +0000)]
Fix minor network problem on MPC5200

20 years agoFix handling of low-speed devices with SL811 USB controller (again).
wdenk [Wed, 12 May 2004 13:20:19 +0000 (13:20 +0000)]
Fix handling of low-speed devices with SL811 USB controller (again).

20 years agoAdd some limited support for low-speed devices to SL811 USB controller
wdenk [Tue, 11 May 2004 21:53:55 +0000 (21:53 +0000)]
Add some limited support for low-speed devices to SL811 USB controller
(at least "usb reset" now passes successfully and "usb info" displays
correct information)

20 years agoChange init sequence for multiple network interfaces: initialize
wdenk [Sat, 8 May 2004 20:33:20 +0000 (20:33 +0000)]
Change init sequence for multiple network interfaces: initialize
on-chip interfaces before external cards.

20 years ago* Fix memory leak in the NAND-specific JFFS2 code
wdenk [Wed, 5 May 2004 19:44:41 +0000 (19:44 +0000)]
* Fix memory leak in the NAND-specific JFFS2 code

* Fix SL811 USB controller when attached to a USB hub

20 years ago* Fix config option spelling in PM520 config file
wdenk [Wed, 5 May 2004 08:31:53 +0000 (08:31 +0000)]
* Fix config option spelling in PM520 config file

* Fix PHY discovery problem in cpu/mpc8xx/fec.c (introduced by
  patches by Pantelis Antoniou, 30 Mar 2004)

20 years ago* Fix minor NAND JFFS2 related issue
wdenk [Mon, 3 May 2004 20:45:30 +0000 (20:45 +0000)]
* Fix minor NAND JFFS2 related issue

* Fixes for SL811 USB controller:
  - implement workaround for broken memory stick
  - improve error handling

* Increase packet send timeout to 10 ms in cpu/mpc8xx/scc.c to better
  cope with congested networks.

20 years agoMake compile clean. U-Boot-1_1_1
wdenk [Sun, 25 Apr 2004 16:40:11 +0000 (16:40 +0000)]
Make compile clean.

20 years ago* Back out Patch by Christian Hohnstaedt, 23 Apr 2004:
wdenk [Sun, 25 Apr 2004 15:41:35 +0000 (15:41 +0000)]
* Back out Patch by Christian Hohnstaedt, 23 Apr 2004:
  (JFFS2 speed enhancements) because of using non-public
  data (PHYS_FLASH_SECT_SIZE)

* Patch by Travis Sawyer, 23 Apr 2004:
  Fix VSC/CIS 8201 phy descrambler interoperability timing due to
  errata from Vitesse Semiconductor.

20 years ago* Patch by Christian Hohnstaedt, 23 Apr 2004:
wdenk [Sun, 25 Apr 2004 14:37:29 +0000 (14:37 +0000)]
* Patch by Christian Hohnstaedt, 23 Apr 2004:
  JFFS2 speed enhancements:
  - repair header CRC calculation in jffs2_1pass.c
  - add eraseblock size to the partition information to skip empty
    eraseblocks if we find more then 4k of free space.
  - The JFFS2 scanner is now fast enough to remove the spinning wheel
    so #ifdef-ed out.
  - add watchdog calls in long running loops

* Patch by Philippe Robin, 22 Apr 2004:
  Fix ethernet configuration for "versatile" board

* Patch by Kshitij Gupta, 21 Apr 2004:
  Remove busy loop and use MPU timer fr usleep() on OMAP1510/1610 boards

* Patch by Steven Scholz, 24 Feb 2004:
  Fix a bug in AT91RM9200 ethernet driver:
  The MII interface is now initialized before accessing the PHY.

* Cleanup PCI ID's

20 years ago* Patch by John Kerl, 19 Apr 2004:
wdenk [Sun, 25 Apr 2004 13:18:40 +0000 (13:18 +0000)]
* Patch by John Kerl, 19 Apr 2004:
  Use U-boot's miiphy.h for PHY register names, rather than
  introducing a new header file.

* Update pci_ids.h from linux-2.4.26

* Patch by Masami Komiya, 19 Apr 2004:
  Fix problem cause by VLAN function on little endian architecture
  without VLAN environment

20 years agoClean up the TQM8xx_YYMHz configurations; allow to use the same
wdenk [Sat, 24 Apr 2004 23:23:30 +0000 (23:23 +0000)]
Clean up the TQM8xx_YYMHz configurations; allow to use the same
binary image for all clock frequencies. Implement run-time
optimization of flash access timing based on the actual bus
frequency.

20 years ago* Modify KUP4X board configuration to use SL811 driver for USB memory LABEL_2004_04_23_2240
wdenk [Fri, 23 Apr 2004 20:32:05 +0000 (20:32 +0000)]
* Modify KUP4X board configuration to use SL811 driver for USB memory
  sticks (including FAT / VFAT filesystem support)

* Add SL811 Host Controller Interface driver for USB

* Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README

* Patch by Pantelis Antoniou, 19 Apr 2004:
  Allow to use shell style syntax (i. e. ${var} ) with standard parser.
  Minor patches for Intracom boards.

* Patch by Christian Pell, 19 Apr 2004:
  cleanup support for CF/IDE on PCMCIA for PXA25X

20 years ago* Temporarily disabled John Kerl's extended MII command code because
wdenk [Sun, 18 Apr 2004 23:32:11 +0000 (23:32 +0000)]
* Temporarily disabled John Kerl's extended MII command code because
  "miivals.h" is missing

* Patches by Mark Jonas, 13 Apr 2004:
  - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S
  - Add sync instructions to IceCube SDRAM init code
  - Move SDRAM chip constants into seperate include files
  - Unify DDR and SDR initialization code
  - Unify all IceCube (Lite5xxx) target names

20 years ago* Patch by John Kerl, 16 Apr 2004:
wdenk [Sun, 18 Apr 2004 22:57:51 +0000 (22:57 +0000)]
* Patch by John Kerl, 16 Apr 2004:
  Enable ranges in mii command, e.g. mii read 0-1f 0 or
  mii read 4-7 18-1a.  Also add mii dump subcommand for
  pretty-printing standard regs 0-5.

* Patch by  Stephen Williams, 16 April 2004:
  fix typo in JSE.h; update MAINTAINERS

20 years ago* Patch by Matthew S. McClintock, 14 Apr 2004:
wdenk [Sun, 18 Apr 2004 22:26:17 +0000 (22:26 +0000)]
* Patch by Matthew S. McClintock, 14 Apr 2004:
  fix initdram function for utx8245 board

* Patch by Markus Pietrek, 14 Apr 2004:
  use ATAG_INITRD2 instead of deprecated ATAG_INITRD tag

* Patch by Reinhard Meyer, 18 Apr 2004:
  provide the IDE Reset Function for EMK 5200 boards

* Patch by Masami Komiya, 12 Apr 2004:
  fix pci_hose_write_config_{byte,word}_via_dword problems

20 years ago* Patch by Sangmoon Kim, 12 Apr 2004:
wdenk [Sun, 18 Apr 2004 22:03:42 +0000 (22:03 +0000)]
* Patch by Sangmoon Kim, 12 Apr 2004:
  Update max RAM size for debris board

* Patch by Travis Sawyer, 08 Apr 2004:
  Add TLB entry for second DIMM slot on ocotea

* Patch by Masami Komiya, 08 Apr 2004:
  add RTL8169 network driver

20 years ago* Patch by Dan Malek, 07 Apr 2004:
wdenk [Sun, 18 Apr 2004 21:45:42 +0000 (21:45 +0000)]
* Patch by Dan Malek, 07 Apr 2004:
  - Add support for RPC/STx GP3, Motorola 8560 board
  - Update 85xx TSEC driver so it searches MII for first available PHY
    and uses that one.
  - Add functions to support console MII commands.

* Patch by Tolunay Orkun, 07 Apr 2004:
  Move  initialization of bi_iic_fast[]
  from board_init_f() to board_init_r()

* Patch by Yasushi Shoji, 07 Apr 2004:
  Cleanup microblaze port

* Patch by Sangmoon Kim, 07 Apr 2004:
  Add auto SDRAM module detection for Debris board

20 years ago* Add missing microblaze header files
wdenk [Sun, 18 Apr 2004 21:17:30 +0000 (21:17 +0000)]
* Add missing microblaze header files

* Patch by Rune Torgersen, 06 Apr 2004:
  - Fix some PCI problems on the MPC8266ADS board
  - Fix the location of some PCI entries in the immap structure

20 years ago* Patch by Yasushi Shoji, 07 Apr 2004:
wdenk [Sun, 18 Apr 2004 21:13:41 +0000 (21:13 +0000)]
* Patch by Yasushi Shoji, 07 Apr 2004:
  - add support for microblaze processors
  - add support for AtmarkTechno "suzaku" board

20 years ago* Configure PPChameleon board to use redundand environment in flash LABEL_2004_04_18_2135
wdenk [Sun, 18 Apr 2004 19:43:36 +0000 (19:43 +0000)]
* Configure PPChameleon board to use redundand environment in flash

* Configure PPChameleon board to use JFFS2 NAND support.

* Added support for JFFS2 filesystem (read-only) on top of NAND flash