git.sur5r.net Git - u-boot/search

]> git.sur5r.net Git - u-boot/search

2017-04-08	Vikas Manocha	spl: armv7m: keep ARM v7M in thumb mode while jumping... Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2017-04-08	Vikas Manocha	stm32f7: enable instruction & data cache Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2017-04-08	Vikas Manocha	armv7m: add instruction & data cache support Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2017-04-05	Vikas Manocha	dm: avoid dropping pin control DT properties in case... Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2017-03-17	Vikas Manocha	ARM: DT: stm32f7: add qspi pin contol node Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2017-03-17	Vikas Manocha	ARM: DT: stm32f7: add ethernet pin contol node Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2017-03-17	Vikas Manocha	ARM: DT: stm32f7: add pin control node for serial port... Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2017-03-17	Vikas Manocha	ARM: DT: stm32f7: add pin control device node Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2017-03-17	Vikas Manocha	PINCTRL: stm32f7: add pin control driver Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2017-03-17	Vikas Manocha	stm32f7: clk: remove usart1 clock enable from board... Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2017-03-17	Vikas Manocha	ARM: DT: stm32f7: add usart1 & clock device tree nodes Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2017-03-17	Vikas Manocha	stm32f7: serial: use clock driver to enable clock Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2017-03-17	Vikas Manocha	clk: stm32f7: add clock driver for stm32f7 family Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2017-03-17	Vikas Manocha	serial: stm32f7: add device tree support Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2017-03-17	Vikas Manocha	arm: use common instructions applicable to armv7m ... Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2016-04-12	Vikas Manocha	stm32: stm32_flash: add memory barrier during flash... Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2016-03-26	Vikas Manocha	stm32f746-disco: enable flash support Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2016-03-26	Vikas Manocha	stm32: stm32f4: move flash driver to mtd driver location Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2016-02-24	Vikas Manocha	stm32: add support for stm32f7 & stm32f746 discovery... Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2016-02-24	Vikas Manocha	stm32x7: add support for stm32x7 serial driver Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2016-02-24	Vikas Manocha	gpio: stm32_gpio: move base addresses to the soc file Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2016-02-24	Vikas Manocha	gpio: stm32_gpio: move clock config from driver to... Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2016-02-08	Vikas Manocha	serial: serial_stm32: move clock config from driver... Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2016-01-20	Vikas Manocha	stm32: move stm32 specific code to mach-stm32 Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2015-07-03	Vikas Manocha	spi: cadence_qspi: add device tree binding doc Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2015-07-03	Vikas Manocha	spi: cadence_qspi: support FIFO width other than 4... Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2015-07-03	Vikas Manocha	spi: cadence_qspi: get sram size from device tree Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2015-07-03	Vikas Manocha	spi: cadence_qspi: move the sram partition in init Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2015-07-03	Vikas Manocha	stv0991: configure device tree for cadence qspi & flash Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2015-07-03	Vikas Manocha	stv0991: enable cadence qspi controller & spi flash Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2015-07-03	Vikas Manocha	stv0991: configure clock & pad muxing for qspi Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2015-07-03	Vikas Manocha	stv0991: remove define CONFIG_OF_SEPARATE from board... Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2015-07-03	Vikas Manocha	stv0991: move OF_CONTROL config to defconfig Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2015-07-03	Vikas Manocha	stv0991: enable saving enrironment in spi flash Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2015-05-10	Vikas Manocha	serial: fdt: add device tree support for pl01x Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2015-05-10	Vikas Manocha	stv0991: use fdt for serial port platform data Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2015-05-10	Vikas Manocha	stv0991: fdt: add stv0991 device tree Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2014-12-09	Vikas Manocha	dm: stv0991: Move serial to driver model Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2014-12-09	Vikas Manocha	stv0991: increase the initial ram size config Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2014-12-09	Vikas Manocha	stv0991: enable default and misc command configs Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2014-12-09	Vikas Manocha	stv0991: enable ethernet support Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2014-12-09	Vikas Manocha	stv0991: Add basic stv0991 architecture support Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2014-12-08	Vikas Manocha	serial: pl01x: avoid pl01x type check two times Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2014-12-08	Vikas Manocha	serial: pl01x: disable as per type of pl01x Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2014-12-08	Vikas Manocha	serial: pl01x: move all line control at same place Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2014-12-08	Vikas Manocha	serial: pl01x: fix pl011 baud rate configuration Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2014-12-08	Vikas Manocha	serial: pl01x: pass pl01x_type to set baudrate Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree
2012-04-04	Vikas Manocha	net/designware: Program phy registers when auto-negotiation... Signed-off-by: Vikas Manocha <vikas.manocha@st.com>	commit \| commitdiff \| tree

Cloned from git://git.denx.de/u-boot.git

RSS Atom