]>
2017-05-31 | Jagan Teki | engicam: Move PHY configs to defconfig Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-31 | Jagan Teki | drivers: net: Kconfig: Add PHY_MICREL_KSZ9021 entry Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-31 | Jagan Teki | icorem6: Recover missing nand defconfig Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-31 | Jagan Teki | engicam: Move SPL mmc configs under CONFIG_SPL_BUILD Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-31 | Jagan Teki | mmc: fsl_esdhc: Move non DM_MMC code in #ifndef CONFIG_DM_MMC Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-18 | Jagan Teki | engicam: common: Move board_late_init Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-18 | Jagan Teki | engicam: common: Move common board code Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-18 | Jagan Teki | geam6/isiot: Move the spl code common Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-18 | Jagan Teki | icorem6[_rqs]: Move the spl code common Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-18 | Jagan Teki | i.MX6UL: isiot: Add SETUP_IOMUX_PADS Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-18 | Jagan Teki | isiot: Fix to use usdhc2_pads for mmc2 Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-18 | Jagan Teki | i.MX6UL: geam6ul: Add SETUP_IOMUX_PADS Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-18 | Jagan Teki | icorem6: Use drive strength macros Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-18 | Jagan Teki | icorem6: Use proper iomux_ddr_regs drive strength values Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-18 | Jagan Teki | engicam: Move uart mux init to SPL Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-18 | Jagan Teki | icorem6: Make SPL to pick suitable fdt Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-18 | Jagan Teki | engicam: Set fdt_file env during run-time Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-18 | Jagan Teki | geam6ul: Add mmc_late_init Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-18 | Jagan Teki | geam6ul: Add modeboot env via board_late_init Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-18 | Jagan Teki | icorem6: Add mmc_late_init Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-18 | Jagan Teki | icorem6: Add modeboot env via board_late_init Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-11 | Jagan Teki | engicam: common: Move board_late_init Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-11 | Jagan Teki | engicam: common: Move common board code Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-11 | Jagan Teki | geam6/isiot: Move the spl code common Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-11 | Jagan Teki | icorem6[_rqs]: Move the spl code common Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-11 | Jagan Teki | i.MX6UL: isiot: Add SETUP_IOMUX_PADS Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-11 | Jagan Teki | isiot: Fix to use usdhc2_pads for mmc2 Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-11 | Jagan Teki | i.MX6UL: geam6ul: Add SETUP_IOMUX_PADS Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-11 | Jagan Teki | icorem6: Use drive strength macros Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-11 | Jagan Teki | icorem6: Use proper iomux_ddr_regs drive strength values Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-11 | Jagan Teki | engicam: Move uart mux init to SPL Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-11 | Jagan Teki | icorem6: Make SPL to pick suitable fdt Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-11 | Jagan Teki | engicam: Set fdt_file env during run-time Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-11 | Jagan Teki | geam6ul: Add mmc_late_init Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-11 | Jagan Teki | geam6ul: Add modeboot env via board_late_init Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-11 | Jagan Teki | icorem6: Add mmc_late_init Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-05-11 | Jagan Teki | icorem6: Add modeboot env via board_late_init Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-04-12 | Jagan Teki | MAINTAINERS: Fix ARM FREESCALE IMX files Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-03-26 | Jagan Teki | configs: imx6: Select missing BOARD_LATE_INIT Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-03-17 | Jagan Teki | i.MX6Q: isiot: Switch the mmc env based on devno Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-03-17 | Jagan Teki | i.MX6Q: icorem6_rqs: Add mmc_late_init Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-03-17 | Jagan Teki | i.MX6Q: icorem6_rqs: Add modeboot env via board_late_init Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-03-17 | Jagan Teki | imx6: icorem6_rqs: Add eMMC boot support Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-03-17 | Jagan Teki | i.MX6UL: isiot: Switch the mmc env based on devno Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-03-17 | Jagan Teki | i.MX6UL: isiot: Add mmc_late_init Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-03-17 | Jagan Teki | i.MX6UL: isiot: Add modeboot env via board_late_init Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-03-17 | Jagan Teki | i.MX6UL: isiot: Add eMMC boot support Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-03-17 | Jagan Teki | imx6: isiotmx6ul: Update SPL board boot order for eMMC Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-03-17 | Jagan Teki | i.MX6: engicam: Include dts files under MAINTAINERS Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-03-17 | Jagan Teki | imx6ul: isiotmx6ul: Enable I2C support Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-03-17 | Jagan Teki | imx6: isiotmx6ul: Add nandboot env support Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-03-17 | Jagan Teki | imx6: isiotmx6ul: Add NAND support Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-03-17 | Jagan Teki | imx6: isiotmx6ul: Add FEC support Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-03-17 | Jagan Teki | arm: dts: imx6ul-isiot: Add FEC node Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-03-17 | Jagan Teki | imx6: isiotmx6ul: Add I2C support Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-03-17 | Jagan Teki | arm: dts: imx6ul-isiot: Add I2C nodes Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-03-17 | Jagan Teki | arm: imx6ul: Add Engicam Is.IoT MX6UL Starter Kit initial... Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-03-17 | Jagan Teki | configs: imx6: Don't define USDHC2_BASE_ADDR Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-01-23 | Jagan Teki | mmc: Print error code for mmc_complete_init failure |
commit | commitdiff | tree |
2017-01-02 | Jagan Teki | imx6ul: geam6ul: Enable I2C support Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-01-02 | Jagan Teki | imx6ul: geam6ul: Add MAINTAINERS for nand_defconfig Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-01-02 | Jagan Teki | configs: engicam: Add fitboot env support Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-01-02 | Jagan Teki | configs: engicam: Cleanup on mmcboot env Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-01-02 | Jagan Teki | configs: engicam: Enable CONFIG_IMAGE_FORMAT_LEGACY Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-01-02 | Jagan Teki | defconfigs: imx6: engicam: Enable FIT Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-01-02 | Jagan Teki | imx6: engicam: Add nandboot env support Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-01-02 | Jagan Teki | defconfigs: engicam: Enable UBI commands Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-01-02 | Jagan Teki | defconfigs: engicam: Enable MMC commands in nand Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-01-02 | Jagan Teki | configs: engicam: Rename nand with gpmi-name in mtdparts Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-01-02 | Jagan Teki | imx6: engicam: Use bootm instead of bootz Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2017-01-02 | Jagan Teki | configs: engicam: Increase nand kernel partition size Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2016-12-16 | Jagan Teki | imx6: icorem6_rqs: Add FEC support Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2016-12-16 | Jagan Teki | arm: dts: imx6qdl-icore-rqs: Add FEC node Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2016-12-16 | Jagan Teki | imx6: geam6ul: Add FEC support Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2016-12-16 | Jagan Teki | arm: dts: imx6ul-geam: Add FEC node Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2016-12-16 | Jagan Teki | imx6: icorem6_rqs: Add I2C support Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2016-12-16 | Jagan Teki | arm: dts: imx6qdl-icore-rqs: Add I2C node's Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2016-12-16 | Jagan Teki | imx6: icorem6: Rename engicam icorem6 defconfig files Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2016-12-16 | Jagan Teki | arm: imx6q: Add Engicam i.CoreM6 Solo/Duallite RQS... Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2016-12-16 | Jagan Teki | arm: imx6q: Add Engicam i.CoreM6 Quad/Dual RQS Starter... Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2016-12-16 | Jagan Teki | imx6: geam6ul: Add default mtd nand partition table Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2016-12-16 | Jagan Teki | imx6: geam6ul: Enable MTD device support Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2016-12-16 | Jagan Teki | imx6: geam6ul: Add NAND support Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2016-12-16 | Jagan Teki | imx6: geam6ul: Add I2C support Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2016-12-16 | Jagan Teki | arm: dts: imx6ul-geam: Add I2C nodes Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2016-12-16 | Jagan Teki | arm: imx6ul: Add Engicam GEAM6UL Starter Kit initial... Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2016-12-16 | Jagan Teki | arm: dts: Add devicetree for i.MX6UL Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2016-12-16 | Jagan Teki | imx6: icorem6: Add I2C support Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2016-12-16 | Jagan Teki | i2c: mxc: Make 'no gpio pinctrl state' print as debug Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2016-12-16 | Jagan Teki | i2c: mxc: Print hex instead of decimal for bus address Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2016-12-16 | Jagan Teki | imx6: icorem6: Add custom splashscreen support Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2016-12-16 | Jagan Teki | imx6: icorem6: Add framebuffer support Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2016-12-16 | Jagan Teki | video: Kconfig: Add VIDEO_IPV3 entry Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2016-12-16 | Jagan Teki | icorem6: Use CONFIG_DM_ETH support Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2016-12-16 | Jagan Teki | ARM: dts: imx6qdl-icore: Add FEC support Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2016-12-16 | Jagan Teki | dm: net: fec: Add .read_rom_hwaddr Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2016-12-16 | Jagan Teki | net: fec_mxc: Driver cleanups Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2016-12-16 | Jagan Teki | net: fec_mxc: Convert into driver model Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2016-12-16 | Jagan Teki | net: fec_mxc: Remove unneeded eth_device arg from fec_get_hwaddr Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> |
commit | commitdiff | tree |
2016-11-18 | Jagan Teki | sf: ids: Use small letter's with flash name |
commit | commitdiff | tree |
next |