]> git.sur5r.net Git - u-boot/shortlog
u-boot
2018-04-17 Tom RiniMerge tag 'arc-for-2018.05-rc3' of git://git.denx.de...
2018-04-17 Neil Armstrongreset: fix bulk API when DM_RESET is disabled
2018-04-17 Bryan O'Donoghuebootm: Align cache flush begin address
2018-04-17 Neil Armstrongclk: fix clk_get_bulk when phandle error
2018-04-17 Neil Armstrongreset: fix reset_get_bulk when phandle error
2018-04-17 Eugeniy PaltsevARC: Remove unused DECLARE_GLOBAL_DATA_PTR from init_he...
2018-04-17 Eugeniy PaltsevARC: Update ARC architecture maintainers
2018-04-17 Eugeniy PaltsevARC: AXS10x: Enable hush shell
2018-04-17 Eugeniy PaltsevARC: HSDK: Fix CPU frequency value
2018-04-17 Tom Riniconfigs: Resync with savedefconfig
2018-04-17 Tom RiniMerge git://git.denx.de/u-boot-marvell
2018-04-17 Matt Pellandmmc: mv_sdhci: zero out sdhci_host structure
2018-04-17 Tom RiniPrepare v2018.05-rc2 v2018.05-rc2
2018-04-16 Patrice Chotardserial: Remove duplicated line in Makefile
2018-04-16 Lukasz Majewskidoc: Update git-mailrc entry for lukma (lukma@denx.de)
2018-04-16 Heinrich Schuchardtenv: mmc/fat/ext4: undefined reference to `mmc_initialize'
2018-04-16 Siva Durga... env: Relocate env drivers if manual reloc is required
2018-04-16 Sjoerd SimonsKconfig: Enlarge default SYS_MALLOC_F_LEN for AM33XX
2018-04-16 Alexander Grafpart: Disable CONFIG_SPL_ISO_PARTITION by default
2018-04-16 Tom RiniMerge git://git.denx.de/u-boot-x86
2018-04-16 Simon Glassx86: Rename coreboot-x86 to coreboot
2018-04-16 Bin Mengdoc: vxworks: Update x86 specific instructions
2018-04-16 Bin Mengbootvx: x86: Assign bootaddr based on kernel memory...
2018-04-16 Bin Mengbootvx: Exit if bootline address is not specified
2018-04-16 Bin Mengbootvx: Refactor the bootline copy codes a little bit
2018-04-16 Bin Mengbootvx: x86: Make VxWorks EFI console driver happy
2018-04-16 Bin Mengpci: video: Only print out when everything is OK
2018-04-16 Bin Mengx86: Change default FRAMEBUFFER_VESA_MODE of some boards
2018-04-16 Bin Mengvideo: vesa: Change default FRAMEBUFFER_VESA_MODE
2018-04-16 Bin Mengbios: vesa: Guard setting vesa mode with CONFIG_FRAMEBU...
2018-04-16 Tom RiniMerge git://git.denx.de/u-boot-cfi-flash
2018-04-16 Bin Mengelf: Add a very simple ELF64 loader
2018-04-16 Bin Mengelf: Add ELF64 related structure defines
2018-04-16 Bin Mengelf: Clean up the ELF header file
2018-04-16 Bin Mengx86: Rename e820entry to e820_entry
2018-04-16 Bin Mengx86: Use 'unsigned int' in install_e820_map() functions
2018-04-16 Bin Mengvxworks: x86: Rename e820info to e820_info
2018-04-16 Bin Mengbootvx: x86: Explicitly clear the bootloader image...
2018-04-16 Bin Mengbootvx: x86: Prepare e820 related stuff from the given...
2018-04-16 Bin Mengdoc: vxworks: Minor update for clarity
2018-04-16 Lukasz Majewskix86: Update the io.h file to use {out|in}_{be|le}X...
2018-04-16 Ivan Gorinovx86: Add 64-bit memory-mapped I/O functions
2018-04-16 Mario Sixmtd: cfi_flash: Make live-tree compatible
2018-04-15 Tom RiniMerge git://git.denx.de/u-boot-imx
2018-04-15 Tom RiniMerge git://git.denx.de/u-boot-net
2018-04-15 Tom RiniMerge git://git.denx.de/u-boot-sh
2018-04-15 Jon Nettletonmx6cuboxi: Fix some memory configuration errors
2018-04-15 Trent Piephoimx: Create distinct pre-processed mkimage config files
2018-04-15 Tom Rinimx31ads: Delete
2018-04-15 Tom Riniimx31_phycore: Delete
2018-04-15 Vanessa Maegimapico-imx7d: Replace fatload command
2018-04-15 Bryan O'Donoghueimx: mx7: snvs: Add an SNVS init routine
2018-04-15 Lukasz Majewskiboot: script: The boot.scr file for K+P's boards
2018-04-15 Lukasz Majewskiimx: board: Add support for the K+P's kp_imx6q_tpc...
2018-04-15 Ian Rayboard: ge: bx50v3: enable backlight on demand
2018-04-15 Ken Linarm: imx: Add Winbond SPI-NOR support for Advantech...
2018-04-15 Bryan O'Donoghueimx: hab: Provide hab_auth_img_or_fail command
2018-04-15 Bryan O'Donoghueimximage: Encase majority of header in __ASSEMBLY__...
2018-04-15 Bryan O'Donoghuewarp7: Set u-boot serial# based on OTP value
2018-04-15 Bryan O'Donoghueimx: mx7: Add comment to describe OTP TESTER registers
2018-04-15 Bryan O'Donoghueimx: mx7: Fix CONFIG_SERIAL_TAG compilation
2018-04-15 Marek VasutARM: mx6: ddr: Add write leveling correction code
2018-04-15 Rasmus Villemoestools/imximage: use 0x prefix in HAB Blocks line
2018-04-15 Rasmus VillemoesMakefile: always preserve output for images that can...
2018-04-13 Marek Vasutmmc: tmio: Rename Matsushita to TMIO
2018-04-13 Marek VasutARM: rmobile: Zap CONFIG_MMC_RENESAS_TUNING
2018-04-13 Marek VasutARM: rmobile: Convert TPL to SPL
2018-04-13 Marek VasutARM: rmobile: Shrink the TPL
2018-04-13 Marek VasutARM: rmobile: Update H2 Stout
2018-04-13 Marek VasutARM: rmobile: Fix LBSC programming offset on M2 Porter
2018-04-13 Marek VasutARM: rmobile: Enable SCIFA0 early on H2 Stout
2018-04-13 Marek Vasutserial: sh: Add SCIFA0 address entry
2018-04-13 Marek Vasutnet: sh_eth: Add remaining Gen2 DT compatible
2018-04-13 Marek Vasutclk: renesas: Minor clean up of the R8A7790 clock driver
2018-04-13 Heinrich Schuchardtvexpress: fix syntax error in armv7_boot_nonsec_default()
2018-04-13 Tom Riniconfigs: Fixup some CPSW-related items
2018-04-13 Vasyl Vavrychukvxworks: fixed cpu enable using PSCI on armv8
2018-04-13 Joe Hershbergernet: phy: Don't limit phy addresses by default
2018-04-13 Joe Hershbergerxilinx: Only enable dist boot pxe when DHCP is enabled
2018-04-13 Joe HershbergerRevert "Kconfig: cmd: Make networking command dependent...
2018-04-13 Joe Hershbergernet: Make core net code depend on NET instead of CMD_NET
2018-04-13 Joe Hershbergernet: Make the BOOTP options default
2018-04-13 Joe Hershbergernet: Improve BOOTP PXE config option
2018-04-13 Joe Hershbergernet: Add the BOOTP_DNS2 option to Kconfig
2018-04-13 Joe Hershbergernet: Improve menu options and help for BOOTP options
2018-04-13 Joe Hershbergernet: Move the DHCP command below the BOOTP command
2018-04-13 Joe Hershbergernet: Move net command options to the cmd menu
2018-04-13 Joe Hershbergernet: Fix distro default dependencies
2018-04-13 Joe Hershbergernet: Make CMD_NET a menuconfig
2018-04-13 Marek Vasutnet: sh_eth: Add remaining Gen2 DT compatible
2018-04-13 Siva Durga... net: zynq_gem: Use max-speed property from dt
2018-04-13 Ye Linet: fec: Fix issue in DM probe timeout
2018-04-13 Peng Fannet: fex_mxc: add i.MX6UL/SX/SL compatible
2018-04-13 Peng Fannet: fec: sharing MDIO for two enet controllers
2018-04-13 Peng Fannet: fec: set dev->seq to priv->dev_id
2018-04-13 Peng Fannet: fec_mxc: simplify fec_get_miibus
2018-04-13 Ye Linet: fec_mxc: Fix DM driver issue in recv
2018-04-13 Matt Pellandnet: mvneta: support setting hardware address
2018-04-13 Christian Gmeinerkconfig: add CONFIG_CC_COVERAGE
2018-04-13 Jean-Jacques... configs: dra7xx_evm/dra7xx_hs_evm: Enable AHCI and...
next