/*
- Bacula® - The Network Backup Solution
-
- Copyright (C) 2000-2011 Free Software Foundation Europe e.V.
-
- The main author of Bacula is Kern Sibbald, with contributions from
- many others, a complete list can be found in the file AUTHORS.
- This program is Free Software; you can redistribute it and/or
- modify it under the terms of version three of the GNU Affero General Public
- License as published by the Free Software Foundation and included
- in the file LICENSE.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU Affero General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- 02110-1301, USA.
-
- Bacula® is a registered trademark of Kern Sibbald.
- The licensor of Bacula is the Free Software Foundation Europe
- (FSFE), Fiduciary Program, Sumatrastrasse 25, 8006 Zürich,
- Switzerland, email:ftf@fsfeurope.org.
+ Bacula(R) - The Network Backup Solution
+
+ Copyright (C) 2000-2017 Kern Sibbald
+
+ The original author of Bacula is Kern Sibbald, with contributions
+ from many others, a complete list can be found in the file AUTHORS.
+
+ You may use this file and others of this release according to the
+ license defined in the LICENSE file, which includes the Affero General
+ Public License, v3.0 ("AGPLv3") and some additional permissions and
+ terms pursuant to its AGPLv3 Section 7.
+
+ This notice must be preserved when any source code is
+ conveyed and/or propagated.
+
+ Bacula(R) is a registered trademark of Kern Sibbald.
*/
/*
- *
* Bacula Director -- backup.c -- responsible for doing backup jobs
*
* Kern Sibbald, March MM
* Open connection with File daemon and pass him commands
* to do the backup.
* When the File daemon finishes the job, update the DB.
- *
*/
#include "bacula.h"
/* Responses received from File daemon */
static char OKbackup[] = "2000 OK backup\n";
static char OKstore[] = "2000 OK storage\n";
+/* After 17 Aug 2013 */
+static char newEndJob[] = "2800 End Job TermCode=%d JobFiles=%u "
+ "ReadBytes=%llu JobBytes=%llu Errors=%u "
+ "VSS=%d Encrypt=%d "
+ "CommBytes=%lld CompressCommBytes=%lld\n";
+/* Pre 17 Aug 2013 */
static char EndJob[] = "2800 End Job TermCode=%d JobFiles=%u "
- "ReadBytes=%llu JobBytes=%llu Errors=%u "
+ "ReadBytes=%llu JobBytes=%llu Errors=%u "
"VSS=%d Encrypt=%d\n";
/* Pre 1.39.29 (04Dec06) EndJob */
static char OldEndJob[] = "2800 End Job TermCode=%d JobFiles=%u "
"ReadBytes=%llu JobBytes=%llu Errors=%u\n";
-/*
+
+/* Commands sent to Storage daemon */
+static char clientaddr[] = "client address=%s port=%d ssl=%d\n";
+
+/* Commands received from Storage daemon */
+static char OKclient[] = "3000 OK client command\n";
+
+/*
* Called here before the job is run to do the job
* specific setup.
*/
bool do_backup_init(JCR *jcr)
{
+ /* Make local copy */
+ jcr->RescheduleIncompleteJobs = jcr->job->RescheduleIncompleteJobs;
if (jcr->is_JobLevel(L_VIRTUAL_FULL)) {
return do_vbackup_init(jcr);
return false;
}
- /*
+ /*
* Get definitive Job level and since time
*/
get_level_since_time(jcr, jcr->since, sizeof(jcr->since));
if (job_canceled(jcr)) {
return 1;
}
-
+
if (row[2][0] == '0') { /* discard when file_index == 0 */
return 0;
}
/* sending with checksum */
- if (jcr->use_accurate_chksum
- && num_fields == 7
+ if (jcr->use_accurate_chksum
+ && num_fields == 7
&& row[6][0] /* skip checksum = '0' */
&& row[6][1])
- {
- jcr->file_bsock->fsend("%s%s%c%s%c%s%c%s",
- row[0], row[1], 0, row[4], 0, row[6], 0, row[5]);
+ {
+ jcr->file_bsock->fsend("%s%s%c%s%c%s%c%s",
+ row[0], row[1], 0, row[4], 0, row[6], 0, row[5]);
} else {
- jcr->file_bsock->fsend("%s%s%c%s%c%c%s",
- row[0], row[1], 0, row[4], 0, 0, row[5]);
+ jcr->file_bsock->fsend("%s%s%c%s%c%c%s",
+ row[0], row[1], 0, row[4], 0, 0, row[5]);
}
return 0;
}
}
f = jcr->job->fileset;
-
+
for (int i=0; i < f->num_includes; i++) { /* Parse all Include {} */
inc = f->include_items[i];
-
+
for (int j=0; j < inc->num_opts; j++) { /* Parse all Options {} */
fopts = inc->opts_list[j];
-
+
for (char *k=fopts->opts; *k ; k++) { /* Try to find one request */
switch (*k) {
case 'V': /* verify */
if (!have_basejob_option && jcr->HasBase) {
return true;
}
-
+
Dmsg0(50, "Checksum will be sent to FD\n");
return false;
}
POOL_MEM buf;
db_list_ctx jobids;
db_list_ctx nb;
+ char ed1[50];
/* In base level, no previous job is used and no restart incomplete jobs */
if (jcr->is_canceled() || jcr->is_JobLevel(L_BASE)) {
return true;
}
- if (!jcr->accurate) {
+ if (!jcr->accurate && !jcr->rerunning) {
return true;
}
if (get_base_jobids(jcr, &jobids)) {
jcr->HasBase = true;
Jmsg(jcr, M_INFO, 0, _("Using BaseJobId(s): %s\n"), jobids.list);
- } else {
+ } else if (!jcr->rerunning) {
return true;
}
+
+ } else if (jcr->is_JobLevel(L_VERIFY_DATA)) {
+ char ed1[50];
+ jobids.add(edit_uint64(jcr->previous_jr.JobId, ed1));
+
} else {
/* For Incr/Diff level, we search for older jobs */
- db_accurate_get_jobids(jcr, jcr->db, &jcr->jr, &jobids);
+ db_get_accurate_jobids(jcr, jcr->db, &jcr->jr, &jobids);
/* We are in Incr/Diff, but no Full to build the accurate list... */
if (jobids.count == 0) {
}
}
+ /* For incomplete Jobs, we add our own id */
+ if (jcr->rerunning) {
+ edit_int64(jcr->JobId, ed1);
+ jobids.add(ed1);
+ }
+
/* Don't send and store the checksum if fileset doesn't require it */
jcr->use_accurate_chksum = is_checksum_needed_by_fileset(jcr);
if (jcr->JobId) { /* display the message only for real jobs */
- Jmsg(jcr, M_INFO, 0, _("Sending Accurate information.\n"));
+ Jmsg(jcr, M_INFO, 0, _("Sending Accurate information to the FD.\n"));
}
/* to be able to allocate the right size for htable */
Mmsg(buf, "SELECT sum(JobFiles) FROM Job WHERE JobId IN (%s)", jobids.list);
db_sql_query(jcr->db, buf.c_str(), db_list_handler, &nb);
Dmsg2(200, "jobids=%s nb=%s\n", jobids.list, nb.list);
- jcr->file_bsock->fsend("accurate files=%s\n", nb.list);
+ jcr->file_bsock->fsend("accurate files=%s\n", nb.list);
if (!db_open_batch_connexion(jcr, jcr->db)) {
Jmsg0(jcr, M_FATAL, 0, "Can't get batch sql connexion");
return false; /* Fail */
}
-
+
if (jcr->HasBase) {
jcr->nb_base_files = str_to_int64(nb.list);
- db_create_base_file_list(jcr, jcr->db, jobids.list);
- db_get_base_file_list(jcr, jcr->db, jcr->use_accurate_chksum,
- accurate_list_handler, (void *)jcr);
+ if (!db_create_base_file_list(jcr, jcr->db, jobids.list)) {
+ Jmsg1(jcr, M_FATAL, 0, "%s", db_strerror(jcr->db));
+ return false;
+ }
+ if (!db_get_base_file_list(jcr, jcr->db, jcr->use_accurate_chksum,
+ accurate_list_handler, (void *)jcr)) {
+ Jmsg1(jcr, M_FATAL, 0, "%s", db_strerror(jcr->db));
+ return false;
+ }
} else {
- db_get_file_list(jcr, jcr->db_batch,
+ if (!db_get_file_list(jcr, jcr->db_batch,
jobids.list, jcr->use_accurate_chksum, false /* no delta */,
- accurate_list_handler, (void *)jcr);
- }
+ accurate_list_handler, (void *)jcr)) {
+ Jmsg1(jcr, M_FATAL, 0, "%s", db_strerror(jcr->db_batch));
+ return false;
+ }
+ }
/* TODO: close the batch connection ? (can be used very soon) */
-
jcr->file_bsock->signal(BNET_EOD);
return true;
}
+bool send_store_addr_to_fd(JCR *jcr, STORE *store,
+ char *store_address, uint32_t store_port)
+{
+ int tls_need = BNET_TLS_NONE;
+
+ /* TLS Requirement */
+ if (store->tls_enable) {
+ if (store->tls_require) {
+ tls_need = BNET_TLS_REQUIRED;
+ } else {
+ tls_need = BNET_TLS_OK;
+ }
+ }
+
+ /*
+ * Send Storage address to the FD
+ */
+ jcr->file_bsock->fsend(storaddr, store_address, store_port, tls_need);
+ if (!response(jcr, jcr->file_bsock, OKstore, "Storage", DISPLAY_ERROR)) {
+ return false;
+ }
+ return true;
+}
+
+bool send_client_addr_to_sd(JCR *jcr)
+{
+ int tls_need = BNET_TLS_NONE;
+ BSOCK *sd = jcr->store_bsock;
+ POOL_MEM buf;
+
+ /* TLS Requirement for the client */
+ if (jcr->client->tls_enable) {
+ if (jcr->client->tls_require) {
+ tls_need = BNET_TLS_REQUIRED;
+ } else {
+ tls_need = BNET_TLS_OK;
+ }
+ }
+ /*
+ * Send Client address to the SD
+ */
+ sd->fsend(clientaddr, jcr->client->address(buf.addr()), jcr->client->FDport, tls_need);
+ if (!response(jcr, sd, OKclient, "Client", DISPLAY_ERROR)) {
+ return false;
+ }
+ return true;
+}
+
+/*
+ * Allow to specify the address used by the Client to
+ * connect to the storage daemon in the Client resource
+ * or in the Storage resource.
+ */
+char *get_storage_address(CLIENT *client, STORE *store)
+{
+ char *store_address;
+
+ if (client && client->fd_storage_address) {
+ Dmsg0(10, "Using Client resource FD Storage Address to contact the Storage\n");
+ store_address = client->fd_storage_address;
+
+ } else if (store->fd_storage_address) {
+ Dmsg0(10, "Using Storage resource FD Storage Address to contact the Storage\n");
+ store_address = store->fd_storage_address;
+
+ } else {
+ Dmsg0(10, "Using default Storage address\n");
+ store_address = store->address;
+ }
+ return store_address;
+}
+
+bool run_storage_and_start_message_thread(JCR *jcr, BSOCK *sd)
+{
+ /*
+ * Start the job prior to starting the message thread below
+ * to avoid two threads from using the BSOCK structure at
+ * the same time.
+ */
+ if (!sd->fsend("run")) {
+ return false;
+ }
+
+ /*
+ * Now start a Storage daemon message thread. Note,
+ * this thread is used to provide the catalog services
+ * for the backup job, including inserting the attributes
+ * into the catalog. See catalog_update() in catreq.c
+ */
+ if (!start_storage_daemon_message_thread(jcr)) {
+ return false;
+ }
+ Dmsg0(150, "Storage daemon connection OK\n");
+ return true;
+}
+
/*
* Do a backup of the specified FileSet
*
bool do_backup(JCR *jcr)
{
int stat;
- int tls_need = BNET_TLS_NONE;
- BSOCK *fd;
+ BSOCK *fd, *sd;
STORE *store;
+ char *store_address;
+ uint32_t store_port;
char ed1[100];
db_int64_ctx job;
POOL_MEM buf;
}
/* Print Job Start message */
- Jmsg(jcr, M_INFO, 0, _("Start Backup JobId %s, Job=%s\n"),
- edit_uint64(jcr->JobId, ed1), jcr->Job);
+ if (jcr->rerunning) {
+ Jmsg(jcr, M_INFO, 0, _("Restart Incomplete Backup JobId %s, Job=%s\n"),
+ edit_uint64(jcr->JobId, ed1), jcr->Job);
+ } else {
+ Jmsg(jcr, M_INFO, 0, _("Start Backup JobId %s, Job=%s\n"),
+ edit_uint64(jcr->JobId, ed1), jcr->Job);
+ }
jcr->setJobStatus(JS_Running);
Dmsg2(100, "JobId=%d JobLevel=%c\n", jcr->jr.JobId, jcr->jr.JobLevel);
return false;
}
+ /* For incomplete Jobs, we add our own id */
+ if (jcr->rerunning) {
+ edit_int64(jcr->JobId, ed1);
+ Mmsg(buf, "SELECT max(FileIndex) FROM File WHERE JobId=%s", ed1);
+ if (db_sql_query(jcr->db, buf.c_str(), db_int64_handler, &job)) {
+ Jmsg(jcr, M_INFO, 0, _("Found %ld files from prior incomplete Job.\n"),
+ (int32_t)job.value);
+ } else {
+ Jmsg(jcr, M_FATAL, 0, "%s", db_strerror(jcr->db));
+ return false;
+ }
+ jcr->JobFiles = job.value;
+ Dmsg1(100, "==== FI=%ld\n", jcr->JobFiles);
+ Mmsg(buf, "SELECT VolSessionId FROM Job WHERE JobId=%s", ed1);
+ if (!db_sql_query(jcr->db, buf.c_str(), db_int64_handler, &job)) {
+ Jmsg(jcr, M_FATAL, 0, "%s", db_strerror(jcr->db));
+ return false;
+ }
+ jcr->VolSessionId = job.value;
+ Mmsg(buf, "SELECT VolSessionTime FROM Job WHERE JobId=%s", ed1);
+ if (!db_sql_query(jcr->db, buf.c_str(), db_int64_handler, &job)) {
+ Jmsg(jcr, M_FATAL, 0, "%s", db_strerror(jcr->db));
+ return false;
+ }
+ jcr->VolSessionTime = job.value;
+ Dmsg4(100, "JobId=%s JobFiles=%ld VolSessionId=%ld VolSessionTime=%ld\n", ed1,
+ jcr->JobFiles, jcr->VolSessionId, jcr->VolSessionTime);
+ }
+
/*
* Open a message channel connection with the Storage
* daemon. This is to let him know that our client
if (!start_storage_daemon_job(jcr, NULL, jcr->wstorage)) {
return false;
}
-
- /*
- * Start the job prior to starting the message thread below
- * to avoid two threads from using the BSOCK structure at
- * the same time.
- */
- if (!jcr->store_bsock->fsend("run")) {
- return false;
+ sd = jcr->store_bsock;
+ if (jcr->client) {
+ jcr->sd_calls_client = jcr->client->sd_calls_client;
}
-
/*
- * Now start a Storage daemon message thread. Note,
- * this thread is used to provide the catalog services
- * for the backup job, including inserting the attributes
- * into the catalog. See catalog_update() in catreq.c
+ * Note startup sequence of SD/FD is different depending on
+ * whether the SD listens (normal) or the SD calls the FD.
*/
- if (!start_storage_daemon_message_thread(jcr)) {
- return false;
+ if (!jcr->sd_calls_client) {
+ if (!run_storage_and_start_message_thread(jcr, sd)) {
+ goto bail_out;
+ }
}
- Dmsg0(150, "Storage daemon connection OK\n");
-
jcr->setJobStatus(JS_WaitFD);
if (!connect_to_file_daemon(jcr, 10, FDConnectTimeout, 1)) {
goto bail_out;
goto bail_out;
}
- /*
- * send Storage daemon address to the File daemon
- */
- store = jcr->wstore;
- if (store->SDDport == 0) {
- store->SDDport = store->SDport;
+ /* TODO: See priority with bandwidth parameter */
+ if (jcr->job->max_bandwidth > 0) {
+ jcr->max_bandwidth = jcr->job->max_bandwidth;
+ } else if (jcr->client->max_bandwidth > 0) {
+ jcr->max_bandwidth = jcr->client->max_bandwidth;
}
- /* TLS Requirement */
- if (store->tls_enable) {
- if (store->tls_require) {
- tls_need = BNET_TLS_REQUIRED;
- } else {
- tls_need = BNET_TLS_OK;
+ if (jcr->max_bandwidth > 0) {
+ send_bwlimit(jcr, jcr->Job); /* Old clients don't have this command */
+ }
+
+ send_snapshot_retention(jcr, jcr->snapshot_retention);
+
+ store = jcr->wstore;
+
+ if (jcr->sd_calls_client) {
+ if (jcr->FDVersion < 10) {
+ Jmsg(jcr, M_FATAL, 0, _("The File daemon does not support SDCallsClient.\n"));
+ goto bail_out;
+ }
+ if (!send_client_addr_to_sd(jcr)) {
+ goto bail_out;
+ }
+
+ if (!run_storage_and_start_message_thread(jcr, sd)) {
+ goto bail_out;
+ }
+
+ store_address = jcr->wstore->address; /* dummy */
+ store_port = 0; /* flag that SD calls FD */
+ } else {
+ /*
+ * send Storage daemon address to the File daemon
+ */
+ if (store->SDDport == 0) {
+ store->SDDport = store->SDport;
}
+
+ store_address = get_storage_address(jcr->client, store);
+ store_port = store->SDDport;
}
- fd->fsend(storaddr, store->address, store->SDDport, tls_need);
- if (!response(jcr, fd, OKstore, "Storage", DISPLAY_ERROR)) {
+ if (!send_store_addr_to_fd(jcr, store, store_address, store_port)) {
goto bail_out;
}
+ /* Declare the job started to start the MaxRunTime check */
+ jcr->setJobStarted();
+
+ /* Send and run the RunBefore */
if (!send_runscripts_commands(jcr)) {
goto bail_out;
}
- /*
+ /*
* We re-update the job start record so that the start
- * time is set after the run before job. This avoids
+ * time is set after the run before job. This avoids
* that any files created by the run before job will
* be saved twice. They will be backed up in the current
* job, but not in the next one unless they are changed.
* Without this, they will be backed up in this job and
- * in the next job run because in that case, their date
+ * in the next job run because in that case, their date
* is after the start of this run.
*/
jcr->start_time = time(NULL);
stat = wait_for_job_termination(jcr);
db_write_batch_file_records(jcr); /* used by bulk batch file insert */
- if (jcr->HasBase && !db_commit_base_file_attributes_record(jcr, jcr->db)) {
- Jmsg(jcr, M_FATAL, 0, "%s", db_strerror(jcr->db));
+ if (jcr->HasBase) {
+ db_commit_base_file_attributes_record(jcr, jcr->db);
+ /* Any error already printed */
}
- if (stat == JS_Terminated) {
+ if (!jcr->is_canceled() && stat == JS_Terminated) {
backup_cleanup(jcr, stat);
return true;
- }
+ }
return false;
/* Come here only after starting SD thread */
uint32_t JobWarnings = 0;
uint64_t ReadBytes = 0;
uint64_t JobBytes = 0;
- int VSS = 0;
+ uint64_t CommBytes = 0;
+ uint64_t CommCompressedBytes = 0;
+ int VSS = 0; /* or Snapshot on Unix */
int Encrypt = 0;
btimer_t *tid=NULL;
- jcr->setJobStatus(JS_Running);
-
if (fd) {
if (timeout) {
tid = start_bsock_timer(fd, timeout); /* TODO: New timeout directive??? */
}
/* Wait for Client to terminate */
while ((n = bget_dirmsg(fd)) >= 0) {
- if (!fd_ok &&
- (sscanf(fd->msg, EndJob, &jcr->FDJobStatus, &JobFiles,
+ if (!fd_ok &&
+ (sscanf(fd->msg, newEndJob, &jcr->FDJobStatus, &JobFiles,
+ &ReadBytes, &JobBytes, &JobErrors, &VSS, &Encrypt,
+ &CommBytes, &CommCompressedBytes) == 9 ||
+ sscanf(fd->msg, EndJob, &jcr->FDJobStatus, &JobFiles,
&ReadBytes, &JobBytes, &JobErrors, &VSS, &Encrypt) == 7 ||
sscanf(fd->msg, OldEndJob, &jcr->FDJobStatus, &JobFiles,
&ReadBytes, &JobBytes, &JobErrors) == 5)) {
stop_bsock_timer(tid);
}
- if (is_bnet_error(fd)) {
+ if (fd->is_error() && jcr->getJobStatus() != JS_Canceled) {
int i = 0;
Jmsg(jcr, M_FATAL, 0, _("Network error with FD during %s: ERR=%s\n"),
job_type_to_str(jcr->getJobType()), fd->bstrerror());
- while (i++ < 10 && jcr->job->RescheduleIncompleteJobs && jcr->is_canceled()) {
+ while (i++ < 20 && jcr->job->RescheduleIncompleteJobs && jcr->is_canceled()) {
bmicrosleep(3, 0);
}
-
}
fd->signal(BNET_TERMINATE); /* tell Client we are terminating */
}
jcr->ReadBytes = ReadBytes;
jcr->JobBytes = JobBytes;
jcr->JobWarnings = JobWarnings;
- jcr->VSS = VSS;
+ jcr->CommBytes = CommBytes;
+ jcr->CommCompressedBytes = CommCompressedBytes;
+ jcr->Snapshot = VSS;
jcr->Encrypt = Encrypt;
- } else {
+ } else if (jcr->getJobStatus() != JS_Canceled) {
Jmsg(jcr, M_FATAL, 0, _("No Job status returned from FD.\n"));
}
-// Dmsg4(100, "fd_ok=%d FDJS=%d JS=%d SDJS=%d\n", fd_ok, jcr->FDJobStatus,
-// jcr->JobStatus, jcr->SDJobStatus);
-
/* Return the first error status we find Dir, FD, or SD */
- if (!fd_ok || is_bnet_error(fd)) { /* if fd not set, that use !fd_ok */
- jcr->FDJobStatus = JS_ErrorTerminated;
+ if (!fd_ok || fd->is_error()) { /* if fd not set, that use !fd_ok */
+ if (jcr->getJobStatus() == JS_Canceled) {
+ jcr->FDJobStatus = JS_Canceled;
+ } else {
+ jcr->FDJobStatus = JS_ErrorTerminated;
+ }
}
if (jcr->JobStatus != JS_Terminated) {
return jcr->JobStatus;
void backup_cleanup(JCR *jcr, int TermCode)
{
char sdt[50], edt[50], schedt[50];
- char ec1[30], ec2[30], ec3[30], ec4[30], ec5[30], compress[50];
- char ec6[30], ec7[30], ec8[30], elapsed[50];
- char term_code[100], fd_term_msg[100], sd_term_msg[100];
- const char *term_msg;
+ char ec1[30], ec2[30], ec3[30], ec4[30], ec5[30];
+ char ec6[30], ec7[30], ec8[30], ec9[30], ec10[30], elapsed[50];
+ char data_compress[200], comm_compress[200];
+ char fd_term_msg[100], sd_term_msg[100];
+ POOL_MEM term_msg;
int msg_type = M_INFO;
MEDIA_DBR mr;
CLIENT_DBR cr;
- double kbps, compression;
+ double kbps, compression, ratio;
utime_t RunTime;
POOL_MEM base_info;
+ POOL_MEM vol_info;
+
+ remove_dummy_jobmedia_records(jcr);
if (jcr->is_JobLevel(L_VIRTUAL_FULL)) {
vbackup_cleanup(jcr, TermCode);
}
Dmsg2(100, "Enter backup_cleanup %d %c\n", TermCode, TermCode);
- memset(&mr, 0, sizeof(mr));
memset(&cr, 0, sizeof(cr));
- if (jcr->getJobStatus() == JS_Terminated &&
+#ifdef xxxx
+ /* The current implementation of the JS_Warning status is not
+ * completed. SQL part looks to be ok, but the code is using
+ * JS_Terminated almost everywhere instead of (JS_Terminated || JS_Warning)
+ * as we do with is_canceled()
+ */
+ if (jcr->getJobStatus() == JS_Terminated &&
(jcr->JobErrors || jcr->SDErrors || jcr->JobWarnings)) {
TermCode = JS_Warnings;
}
-
+#endif
+
update_job_end(jcr, TermCode);
if (!db_get_job_record(jcr, jcr->db, &jcr->jr)) {
switch (jcr->JobStatus) {
case JS_Terminated:
if (jcr->JobErrors || jcr->SDErrors) {
- term_msg = _("Backup OK -- with warnings");
+ Mmsg(term_msg, _("Backup OK -- %s"), jcr->StatusErrMsg[0] ? jcr->StatusErrMsg : _("with warnings"));
+
} else {
- term_msg = _("Backup OK");
+ Mmsg(term_msg, _("Backup OK"));
}
break;
case JS_Incomplete:
- term_msg = _("Backup failed -- incomplete");
+ Mmsg(term_msg, _("Backup failed -- incomplete"));
break;
case JS_Warnings:
- term_msg = _("Backup OK -- with warnings");
+ Mmsg(term_msg, _("Backup OK -- %s"), jcr->StatusErrMsg[0] ? jcr->StatusErrMsg : _("with warnings"));
break;
case JS_FatalError:
case JS_ErrorTerminated:
- term_msg = _("*** Backup Error ***");
+ Mmsg(term_msg, _("*** Backup Error ***"));
msg_type = M_ERROR; /* Generate error message */
if (jcr->store_bsock) {
jcr->store_bsock->signal(BNET_TERMINATE);
- if (jcr->SD_msg_chan) {
+ if (jcr->SD_msg_chan_started) {
pthread_cancel(jcr->SD_msg_chan);
}
}
break;
case JS_Canceled:
- term_msg = _("Backup Canceled");
+ Mmsg(term_msg, _("Backup Canceled"));
if (jcr->store_bsock) {
jcr->store_bsock->signal(BNET_TERMINATE);
- if (jcr->SD_msg_chan) {
+ if (jcr->SD_msg_chan_started) {
pthread_cancel(jcr->SD_msg_chan);
}
}
break;
default:
- term_msg = term_code;
- sprintf(term_code, _("Inappropriate term code: %c\n"), jcr->JobStatus);
+ Mmsg(term_msg, _("Inappropriate term code: %c\n"), jcr->JobStatus);
break;
}
bstrftimes(schedt, sizeof(schedt), jcr->jr.SchedTime);
bstrftimes(edt, sizeof(edt), jcr->jr.EndTime);
RunTime = jcr->jr.EndTime - jcr->jr.StartTime;
if (RunTime <= 0) {
- kbps = 0;
- } else {
- kbps = ((double)jcr->jr.JobBytes) / (1000.0 * (double)RunTime);
+ RunTime = 1;
}
+ kbps = ((double)jcr->jr.JobBytes) / (1000.0 * (double)RunTime);
if (!db_get_job_volume_names(jcr, jcr->db, jcr->jr.JobId, &jcr->VolumeName)) {
/*
* Note, if the job has erred, most likely it did not write any
}
if (jcr->ReadBytes == 0) {
- bstrncpy(compress, "None", sizeof(compress));
+ bstrncpy(data_compress, "None", sizeof(data_compress));
} else {
- compression = (double)100 - 100.0 * ((double)jcr->JobBytes / (double)jcr->ReadBytes);
+ compression = (double)100 - 100.0 * ((double)jcr->SDJobBytes / (double)jcr->ReadBytes);
if (compression < 0.5) {
- bstrncpy(compress, "None", sizeof(compress));
+ bstrncpy(data_compress, "None", sizeof(data_compress));
} else {
- bsnprintf(compress, sizeof(compress), "%.1f %%", compression);
+ if (jcr->SDJobBytes > 0) {
+ ratio = (double)jcr->ReadBytes / (double)jcr->SDJobBytes;
+ } else {
+ ratio = 1.0;
+ }
+ bsnprintf(data_compress, sizeof(data_compress), "%.1f%% %.1f:1",
+ compression, ratio);
}
}
+ if (jcr->CommBytes == 0 || jcr->CommCompressedBytes == 0) {
+ bstrncpy(comm_compress, "None", sizeof(comm_compress));
+ } else {
+ compression = (double)100 - 100.0 * ((double)jcr->CommCompressedBytes / (double)jcr->CommBytes);
+ if (compression < 0.5) {
+ bstrncpy(comm_compress, "None", sizeof(comm_compress));
+ } else {
+ ratio = (double)jcr->CommBytes / (double)jcr->CommCompressedBytes;
+ bsnprintf(comm_compress, sizeof(comm_compress), "%.1f%% %.1f:1",
+ compression, ratio);
+ }
+ Dmsg2(200, "=== CommCompressed=%lld CommBytes=%lld\n",
+ jcr->CommCompressedBytes, jcr->CommBytes);
+ }
jobstatus_to_ascii(jcr->FDJobStatus, fd_term_msg, sizeof(fd_term_msg));
jobstatus_to_ascii(jcr->SDJobStatus, sd_term_msg, sizeof(sd_term_msg));
if (jcr->HasBase) {
- Mmsg(base_info, " Base files/Used files: %lld/%lld (%.2f%%)\n",
- jcr->nb_base_files,
- jcr->nb_base_files_used,
+ Mmsg(base_info, _(" Base files/Used files: %lld/%lld (%.2f%%)\n"),
+ jcr->nb_base_files,
+ jcr->nb_base_files_used,
jcr->nb_base_files_used*100.0/jcr->nb_base_files);
}
+ /* Edit string for last volume size */
+ if (mr.VolABytes != 0) {
+ Mmsg(vol_info, _("meta: %s (%sB) aligned: %s (%sB)"),
+ edit_uint64_with_commas(mr.VolBytes, ec7),
+ edit_uint64_with_suffix(mr.VolBytes, ec8),
+ edit_uint64_with_commas(mr.VolABytes, ec9),
+ edit_uint64_with_suffix(mr.VolABytes, ec10));
+ } else {
+ Mmsg(vol_info, _("%s (%sB)"),
+ edit_uint64_with_commas(mr.VolBytes, ec7),
+ edit_uint64_with_suffix(mr.VolBytes, ec8));
+ }
+
// bmicrosleep(15, 0); /* for debugging SIGHUP */
Jmsg(jcr, msg_type, 0, _("%s %s %s (%s):\n"
" SD Bytes Written: %s (%sB)\n"
" Rate: %.1f KB/s\n"
" Software Compression: %s\n"
+" Comm Line Compression: %s\n"
"%s" /* Basefile info */
-" VSS: %s\n"
+" Snapshot/VSS: %s\n"
" Encryption: %s\n"
" Accurate: %s\n"
" Volume name(s): %s\n"
" Volume Session Id: %d\n"
" Volume Session Time: %d\n"
-" Last Volume Bytes: %s (%sB)\n"
+" Last Volume Bytes: %s\n"
" Non-fatal FD errors: %d\n"
" SD Errors: %d\n"
" FD termination status: %s\n"
edit_uint64_with_commas(jcr->SDJobBytes, ec5),
edit_uint64_with_suffix(jcr->SDJobBytes, ec6),
kbps,
- compress,
+ data_compress,
+ comm_compress,
base_info.c_str(),
- jcr->VSS?_("yes"):_("no"),
+ jcr->Snapshot?_("yes"):_("no"),
jcr->Encrypt?_("yes"):_("no"),
jcr->accurate?_("yes"):_("no"),
jcr->VolumeName,
jcr->VolSessionId,
jcr->VolSessionTime,
- edit_uint64_with_commas(mr.VolBytes, ec7),
- edit_uint64_with_suffix(mr.VolBytes, ec8),
+ vol_info.c_str(),
jcr->JobErrors,
jcr->SDErrors,
fd_term_msg,
sd_term_msg,
- term_msg);
+ term_msg.c_str());
Dmsg0(100, "Leave backup_cleanup()\n");
}
BPIPE *bpipe = NULL;
int got_pipe = 0;
POOLMEM *fname = get_pool_memory(PM_FNAME);
- fname = edit_job_codes(jcr, fname, jcr->job->WriteBootstrap, "");
+ fname = edit_job_codes(jcr, fname, jcr->job->WriteBootstrap, "",
+ job_code_callback_director);
VOL_PARAMS *VolParams = NULL;
int VolCount;
fd = bpipe ? bpipe->wfd : NULL;
} else {
/* ***FIXME*** handle BASE */
- fd = fopen(fname, jcr->is_JobLevel(L_FULL)?"w+b":"a+b");
+ fd = bfopen(fname, jcr->is_JobLevel(L_FULL)?"w+b":"a+b");
}
if (fd) {
VolCount = db_get_job_volume_parameters(jcr, jcr->db, jcr->JobId,
}
fprintf(fd, "VolSessionId=%u\n", jcr->VolSessionId);
fprintf(fd, "VolSessionTime=%u\n", jcr->VolSessionTime);
- fprintf(fd, "VolAddr=%s-%s\n",
+ fprintf(fd, "VolAddr=%s-%s\n",
edit_uint64(VolParams[i].StartAddr, ed1),
edit_uint64(VolParams[i].EndAddr, ed2));
fprintf(fd, "FileIndex=%d-%d\n", VolParams[i].FirstIndex,