General:
+Changes to 1.37.36:
+20Aug05
+- Landon's fix for NLS detection
+- Eliminate incorrect compiler warning on FreeBSD.
+- Move Win32 errno message build into berrno constructor.
+- Minor Win32 build tweaks
+19Aug05
+- A number of minor build Win32 fixes.
+- Remove a PostQuitMessage() as suggested by Thorsten so that
+ BartPE restore can work correctly.
+- Fix for create JobMedia so that VolIndex remains valid even
+ during a delete Job or pruning -- bug 402.
+- Minor tweak for Win32 build.
+18Aug05
+- Win32 fix -- remove debug O_NONBLOCK code.
+- Fix bug 399 -- make_catalog_backup does not work for sqlite3
+- Implement unloading a volume in a different drive if it
+ is needed in the current drive.
+- Implement search for unused autochanger drive.
+- Implement search for exact Volume in reservation before
+ other searches.
+- Fix picking up drive in Dir so that it is not done in
+ the status command.
+- Eliminate double check on "loaded" for autochanger.
+17Aug05
+- Start coding better reservation algorithm
+- Always look for slot for label command.
+- Add more debug code for autochangers.
+- Apply fix from Stephan Leemburg <sleemburg@jvc.nl> for
+ improper scanning of schedule resource:
+ Run = Level=Full Pool=Catalog daily at 1:20
+- Apply patch from Chris Lee <labmonkey42@gmail.com> for
+ adding --enable-build-dird --enable-build-stored.
+- Tweak datadir definition in configure.in
+16Aug05
+- Fix bug that missed drive=nn specification.
+- Eliminate nonblocking kludge in heartbeat of FD as
+ it caused high CPU usage.
+- Pickup loaded slot when doing open() of tape drive.
+- Make autochanger reservation code go through full list
+ first pass until exact match found.
+15Aug05
+- Fix how FileSet is saved in job record to correct continual
+ Full save.
+- Make datadir print on config.out listing.
+- Move get FileSet record up in backup init to eliminate continual
+ Full save seen by Peter Sjoberg.
+- Add VolumeName to read-only Python variables.
+- Add VolumePurged event for Python.
+- Suppress /dev/ Filesystem change prohibited INFO messages.
+- Do not delete FT_RAW files before restore (allows FIFOs
+ to be used for restore).
+13Aug05
+- Add drive specification to mount, unmount, release, label,
+ and relabel for Autochangers. Note Dir<->SD protocol has
+ changed.
+
+Changes to 1.37.35:
+12Aug05
+- Disable parts of NLS as the configure does not work here.
+- In job backup init (backup.c) define definitive Job level and
+ since time, *then* apply Job Pool override selection if any.
+11Aug05
+- Modified bconsole script so that it is improperly
+ installed, it will refuse to execute. This avoids
+ recursive call loops.
+
+Changes to 1.37.34:
+06Aug05
+- Apply David's ACL fix to src/filed/acl.c
+05Aug05
+- Apply patches sent by David Duchscher <kreios@gmail.com> for
+ making ACLs work on MacOS X and FreeBSD.
+04Aug05
+- Apply patch in bug#397 that improved configure
+ - find readline under $with_readline/include/readline
+ - no libutil under Solaris
+ - no need for -ldl under Solaris
+- Make reservation system single threaded during the
+ search to avoid two threads competing for the same
+ resource.
+- Correct a return code in find_suitable_device_for_job()
+ Possibly cause of "busy writing to another volume".
+03Aug05
+- Modify open() for tape so nonblocking really works.
+- Use fcntl() to reset blocking status rather than close()
+ and reopen the drive.
+- Make sure dev->open() is always called so that any change
+ in read/write permissions will occur.
+- Open drives initially in daemon in read-only mode.
+- Ensure that each time the VolHdr.VolumeName is zapped
+ or changed that free_volume() is called on the old name.
+
+Changes to 1.37.33:
+03Aug05
+- Require 5 arguments to mtx-changer except list and slots
+- Turn -EPIPE status returns from bpipe to ETIME
+- Include Slot in SD status output
+- Do not term_dev() during initialization in SD if the device
+ could not be opened. In the case of a tape drive, there may
+ be no tape in the drive.
+
+Changes to 1.32.32:
+02Aug05
+- Correct PostgreSQL database scripts as suggested by a user.
+- Add additional info to FATAL message generated when a device
+ is busy writing to another volume.
+- Suppress an inappropriate NULL Volume name message after a cancel.
+- Correct a warning message in reserve.c
+29Jul05
+- Apply user's patch to make mutiple modifiers for times
+ work correctly.
+- Make read_dev_volume_label() handle ANSI/IBM labels
+ correctly -- ie space over any label at the beginning
+ of the tape.
+28Jul05
+- Make ANSI/IBM writing of HDR1/2 labels ignore any
+ errors if at end of tape.
+- Apply Martin's patch to improve Python detection in
+ configure.in
+- Temporarily turn off disk seeking until I find the
+ cause of the problem.
+27Jul05
+- Add OSF1 patch supplied by user.
+- Use number of files selected from write_bsr() only
+ if it is not defined.
+- Explicitly seek to end of file when getting size for
+ restore test.
+- Correctly set EndBlock position in JobMedia record
+ for files.
+- Remove unnecessary set StartBlock in bscan. Caused bscan
+ regression error.
+26Jul05
+- Modify mtx-changer to wait a maximum of 300 seconds.
+- Do restart of failed jobs only for Backups job types.
+- A number of DVD updates from Nicolas.
+24Jul05
+- Turn off old service helper code in Win32.
+- Correct Messages bug found by Phil in stored.
+23Jul05
+- Complete (almost) documentation of 1.38.
+- Add error messages for error conditions with VSS.
+- Fix additional problems with VSS backup that I introduced.
+Changes to 1.37.31:
+22Jul05
+- Correct compiler complaints in wx-console and tray-monitor.
+- Correct VSS problems recognizing c:
+- Add VSS before job status
+- Fix output of status from being one big line.
+- Change cd xx; make to cd xx && make as suggested by Phil.
+- Cleanup projects file
+- Remove unnecessary casting of FF_PKT in filed.
+- Apply Thorsten's bugfix for vss_generic.cpp
+- Add check for df path for dvd_freespace
+- Use df to get space used on DVD.
+- Change sense of flag indicating erase DVD or not before writing.
+- Fix bpipe so that it never modifies the result pointer.
+- Replace more dev_name by print_name().
+- Rewrite edit_device_codes_dev() so it does not overwrite the
+ supplied buffer.
+- Update printing of labels (for bls) so that critical information
+ is printed (Job name and timestamp).
+- Cleanup old spool files when starting the SD.
+- Modify vss.cpp to allow C: as a path name. Otherwise VSS
+ doesn't work when only a drive name is given.
+- Modify vss.c to eliminate double / in filenames.
+- Update doc -- particularly the restore chapter.
+18Jul05
+- Make all files in working directory have .xxx at end.
+- Work on DVD writing.
+- Fix keepatime bug (bugs database).
+- Move Python variables from Job to Bacula. They are
+ DirName, Version, ConfigFile, and WorkingDir
+- Fix delete of bootstrap to only occur on Bacula created
+ filenames.
+- Allow cancelling a Job name that is not active. It is
+ sent to the daemons.
+17Jul05
+- Fix name space pollution by OpenSSL 0.9.8 reported by
+ Matthias Kurz -- applied his patch.
+- Fix bpipe.c so that it does not modify results pointer.
+ ***FIXME*** calling sequence should be changed.
+- Remove some remaining references to dev_name.
+- Fix calls to mount_dev() and unmount_dev() to
+ correspond to returned value (bool instead of int).
+- Try without success to make DVD writing work.
+
+Changes to 1.37.30 released 16 July 05:
+14Jul05
+- Fix "dir" command scanning field misalignment in
+ wx-console.
+- Switch to using the wxWidgets Unicode library.
+- Include msvcr71.dll in distribution.
+- Add VSS to status line in Win32 FD if enabled.
+- Get VSS build scripts working with Thorsten's help.
+- Unlink the bootstrap file after sending it to
+ the FD.
+- Remove sending include/exclude lists to the FD during
+ a restore -- deprecated code.
+- Cleanup the bootstrap files in the FD.
+
+Changes to 1.37.29:
+14Jul05
+- Remove old commented out code from configure.in
+- Add baculavssfd.mak file for building VSS version of
+ Win32 FD.
+- Correct date (year) in vss.cpp and vss_generic.cpp
+13Jul05
+- I finally found and squashed the elusive SD crash.
+ I needed to initialize the used volume list before
+ firing off the device initialization thread.
+Changes to 1.37.28:
+11Jul05
+- Make sure that bpipe results are zapped even on
+ error return.
+- Lots of documentation.
+- Do not prune volume marked as append when needing a
+ new Volume.
+- Print a warning message in SD if a non-used Volume
+ is specified and autolabel not turned on.
+- Correct a bug in chksum.c concerning SHA1 signatures
+ (an * should have been & when checking for a bit flag).
+- Print File:Block for all label records in label.c -- concerns
+ primarily bls when doing Job listings (-j).
+- Correct is_volume_in_use() to return false if testing
+ on the same device where the Volume is already mounted.
+- Define a init_done flag in the SD that is set when the
+ devices are initialized and make users connecting wait.
+ This prevents useless connect failure warning messages.
+- Do additional device locking in ask_op_to_mount_volume()
+ to prevent race conditions with a user labeling a Volume
+ or autolabeling.
+09Jul05
+- Add a test for error return from bnet_wait... in heartbeat.c
+ in FD to avoid CPU loop.
+- Implement TLS in gnome console and wx-console.
+08Jul05
+- Correct a NULL pointer reference in the mount command.
+- Correct typo in Copyright
+- Add detection of EOM for IBM drives (i.e. errno == ENOSPC)
+07Jul05
+- Remove temp file created in mtx-changer script.
+- Make fsf_dev() into a class method.
+06Jul05
+- Modify mtx-changer.in script to return slot:barcode for
+ Volumes that are loaded in the drives.
+- Correct some more places where dev->is_blocked() needs
+ to be checked in dircmd.c in SD.
+- Update doc.
+05Jul05
+- Add code to ensure that reserved but unused volumes
+ are freed.
+- Correct how Volumes are mounted and handled so that the SD
+ does not get stuck if multiple volumes are used (recycling,
+ relabling, ...)
+- Correct bug where you could relabel a volume while it
+ was being acquired -- created chaos.
+04Jul05
+- Correct seg fault caused by open() calling sequence change.
+03Jul05
+- Add new rc-chio-changer script by Rudolf Cejka to
+ examples/autochangers
+- Apply Rudolf's changes to bacula.in
+- Expand the space from 8 to 10 characters in editing
+ file sizes for restore and dir of catalog, otherwise
+ GB sizes are truncated -- fixes bug report.
+- Modify wx-console to know about 10 character widths.
+- Allow decending into top level directory if "recurse=no"
+ is set. Fixes a bug report.
+- Install pthreadVCE.dll when installing console or wx-console
+ on Win32 systems. Fixes bug report.
+02Jul05
+- Tweak dvd-writepart script to prevent door from opening/closing
+ so much.
+- Remove GROUP BY in several PostgreSQL commands to prevent error.
+ Resolves bug report.
+- Ensure that < as first character of filename list is not treated
+ as a directory for restore.
+- Add debug to heartbeat in FD as it seems to go into an
+ infinite loop from time to time during SD failure in DVD writing.
+- Add more debug code to dvd writing.
+- Attempt not to destroy existing fs on DVD.
+30Jun05
+- Detect device mounted for DVD and suppress be sure to
+ mount message after label.
+- Set Cleaning tape status to "Cleaning" and force no
+ MediaType.
+- Get DVD writing working with new standard Bacula open()
+ code.
+- Rename get_filename() to make more sense.
+- Detect "is already mounted on" on mount command so to avoid
+ error if device is already mounted.
+- Eliminated guess_name() code. It may be necessary to
+ add it back later.
+- Eliminate seg fault from printing invalid results.
+- Make dvd_write_part() bool.
+
+29Jun05
+- Attempt to fix DVD writing by eliminating a number of the
+ DVD subroutines to simplify.
+- Modify DEVICE::open() to take dcr as first argument. This
+ will permit providing more info to DVD opening.
+- Fix scanning for time/size items which in some cases
+ ate the next line.
+- Eliminate read_dvd_volume_label(). New code (not yet written)
+ *must* open dvd appropriately before calling
+ read_dev_volume_label.
+- Modify open_first_part() open_next_part() to take DCR as
+ argument.
+- Make label command from console work on DVDs.
+- Make mount command from console work on DVDs.
+ Unmount does not work yet.
+
+Changes to 1.37.27:
+27Jun05
+- Add Database vendor to CatalogRes tuple for Python.
+- Update doc
+- Implement DoesVolumeExist(Vol) for Python.
+- Prevent python command from seg faulting if no arg given.
+
+Changes to 1.37.26:
+26Jun05
+- Add set_mode method in DEVICE.
+- Correct set_mode method in DEVICE
+- Add more DVD debug info
+23Jun05
+- Check for incorrect duration and size modifiers in conf files.
+22Jun05:
+- Make Version a tuple (version, build-date)
+- Add CatalogRes tuple (DBName, Address, User, Password,
+ Socket, Port)
+- Add Version, ConfigFile, and WorkingDir as Python attributes
+ in the Director.
+- Implement code (principally for Win32) that on failure to
+ create a file, it will cd into the directory and attempt
+ to create the file using a relative path. This avoids creating
+ files with paths which fail on Win32.
+- Fix parsing of times and sizes with decimal numbers.
+- Make free_volume_list() in SD work if vol list is not
+ initialized (./bacula-sd -t).
+21Jun05:
+- Add debug error printout when open() fails.
+- If open() of DVD fails in mount.c, return false.
+- Split open() code for DVD into separate subroutine in dev.c
+
+Changes to 1.37.25 released on 20 Jun 05:
+20Jun05:
+- Remove (cd gnome-console; make clean) from src/Makefile.in
+- Fix bug where Storage daemon gets confused about what
+ tape is mounted. (one line of code was inadvertently
+ deleted).
+
+Changes to 1.37.24:
+18Jun05
+- DVD writing/reading seems to be mostly working.
+- Set execute bits on dvd-freespace and dvd-writepart
+- Make dvd-freespace use existing dummy file.
+- Modify dvd-freespace to pickup size from Track Size:
+16Jun05
+- Add Date, Job, level to updates to .bsr file in
+ dird/backup.c
+- Add debug info to dvd-freespace.in
+- Fix hard coded bacula.sql in make_catalog_backup reported
+ by a user.
+- Make sure a verify volume to catalog never reports an error
+ if there are zero files to verify.
+- Remove confusing debug info in filed/backup.c on network
+ error.
+- Make sure output from console is not sent to system log.
+- Convert open_dev() into a class method.
+- Change VolHdr.VolName to VolHdr.VolumeName.
+- Add a flag in the device state word to indicate that
+ we found Media in the drive (DVD).
+- Make mount_dev() and unmount_dev() return bool.
+
+Changes to 1.37.22:
+14Jun05
+- Fix the same state variable problem in open_next_part().
+- C++ify the SD code a bit more.
+13Jun05
+- Add more debug code and clarify debug code for DVDs.
+- Do not save and restore state in open_first_part()
+ since state should be properly set after open_dev().
+- Make default mandir /usr/share/man
+- Install Bacula man page.
+- Implement passing of FileSet Enable VSS to FD.
+- Move main body of reserve drive code into subroutine
+ so that it can be called multiple times.
+12Jun05
+- Eliminate getpass() for Win32 builds in console as the
+ function does not exist.
+10Jun05
+- Correct some reservation problems in SD when no devices
+ are available.
+- Start removing #ifdef HAVE_TLS by sneaky tricks.
+- Begin implementation of TLS in wx-console
+- Remove ignoring SIGCHLD from console.
+- Rework the dlist binary search routines for implemenation
+ of the Volume reservation code -- make it more general.
+- Strip double slashes // from Win32 filenames in an attempt
+ to resolve restore problems on some systems.
+- Fix a minor bugs in the trace code that caused the first
+ line output to be lost.
+- Implement a good first cut at adding Volume reservation code
+ to the storage daemon (in file reserve.c).
+- Remove old unused code from the tree.c routines.
+
+Changes to 1.37.21:
+06Jun05
+- Fix compile problems on Win32
+- Start writing Volume reservation list (already exists, but
+ is not really very good).
+- Implement attribute caching to put Signature into database
+ at the same time as the file attributes thus eliminating a
+ number of database accesses.
+- Correct a reservation problem.
+- Implement full Dir Storage use.
+- Reduce a bit of TLS #ifdeffing.
+
+Changes to 1.37.20:
+04Jun05
+- Minor changes
+01Jun05
+- Add more documentation to mtx-changer.in
+- Correct link to manual in authenticate.c in various
+ directories.
+- Create a new src/stored/reserve.c file where the
+ Use Storage command is processed and drives are
+ reserved.
+- Modify src/stored/autochanger.c to keep track of each
+ Slot that is loaded for each device.
+- Ensure that changer_command and changer_name are picked
+ up from Autochanger resource if not specified, and if
+ neither is specified, err.
+30May05
+- Fix bextract.c compile problem
+- Create bacula.man
+- Make make distclean clean a bit better
+29May05
+- Remove old code in jcr.c
+- Make testls release jcr chain when terminating.
+27May05
+- Implement Maximum Job Spool Size (actually DCR based)
+26May05
+- Use light weight non-recursive locking on jcr chain.
+- Make JCR a class and implement inc_use_count() and
+ dec_use_count() methods that ensure that the jcr is
+ locked when inc/dec the use count.
+- Remove the global jcr lock when traversing the jcr
+ chain.
+- Use dlist to implement the jcr chain rather than hand
+ crafted next and prev links.
+- Lock the jcr chain inside each function that modifies
+ the chain.
+
+Changes to 1.37.19:
+26May05
+- Fix compile problem of ua_restore.c on broken compilers.
+- Apply patch from bug 326 to permit bacula status by any user.
+- Fix bug 325 -- conversion of 12:30pm to 24hour time.
+25May05
+- Put Dmsg() on inside if() to avoid calling subroutine.
+- Make restore.bsr have unique name.
+- Allow user to define bsr filename on restore command line
+ with bootstrap=xxx.bsr
+- Add limit=nnn to "list jobs" command.
+- Remove old restore code that did not use .bsr file.
+- unlink automatically generated bsr file.
+- Cleanup heartbeat code so that duped fd is almost sure
+ to be released. Previously under certain conditions, the
+ memory was not released due to race conditions.
+- Shorten copyright.
+20May05
+- Unify the reserve_device() for a single device into one subroutine.
+18May05
+- Modify wait during use_device to happen only after all devices
+ have been examined rather than in the reserve_device code.
+- Correct updating count of number of Volumes in a pool.
+
Changes to 1.37.18:
+16May05
+- Add more debug to SD for Autochangers + status output.
+- Add Scratch to PoolType in PostgreSQL make...tables and do not
+ permit NULL PoolTypes. Fix for bug 319 reported by Eric.
+- Update LICENSE.
+- Add quotes around filename in parse_config error message. Bug
+ reported by Eric.
+15May05
+- Change nested \include to \input so that sections are properly
+ included in the pdf manual -- update the Web site.
+- Set reconnect flag in MySQL packet to 1 to ensure that connection
+ is re-established. MySQL 5 changed default to 0. Fixes bug report.
+- Fix Scratch pool handling as reported in a bug by Eric Bollengier
+ by applying his patch.
+- Remove delete job in favor of delete jobid.
+- Add = NULL to configfile definitions as reported by Eric in a bug
+ report.
+- Update winbacula.nsi.in to reflect new manual file structure.
10May05
- Correct a minor build problem with wx-console.
- Add cancel() to Dir Python scripting.
projects / bacula / docs / blobdiff