]> git.sur5r.net Git - cc65/blob - src/cc65/main.c
Merge telemon24 and telemon30 into telestrat target.
[cc65] / src / cc65 / main.c
1 /*****************************************************************************/
2 /*                                                                           */
3 /*                                  main.c                                   */
4 /*                                                                           */
5 /*                             cc65 main program                             */
6 /*                                                                           */
7 /*                                                                           */
8 /*                                                                           */
9 /* (C) 2000-2015, Ullrich von Bassewitz                                      */
10 /*                Roemerstrasse 52                                           */
11 /*                D-70794 Filderstadt                                        */
12 /* EMail:         uz@cc65.org                                                */
13 /*                                                                           */
14 /*                                                                           */
15 /* This software is provided 'as-is', without any expressed or implied       */
16 /* warranty.  In no event will the authors be held liable for any damages    */
17 /* arising from the use of this software.                                    */
18 /*                                                                           */
19 /* Permission is granted to anyone to use this software for any purpose,     */
20 /* including commercial applications, and to alter it and redistribute it    */
21 /* freely, subject to the following restrictions:                            */
22 /*                                                                           */
23 /* 1. The origin of this software must not be misrepresented; you must not   */
24 /*    claim that you wrote the original software. If you use this software   */
25 /*    in a product, an acknowledgment in the product documentation would be  */
26 /*    appreciated but is not required.                                       */
27 /* 2. Altered source versions must be plainly marked as such, and must not   */
28 /*    be misrepresented as being the original software.                      */
29 /* 3. This notice may not be removed or altered from any source              */
30 /*    distribution.                                                          */
31 /*                                                                           */
32 /*****************************************************************************/
33
34
35
36 #include <stdio.h>
37 #include <string.h>
38 #include <stdlib.h>
39 #include <errno.h>
40
41 /* common */
42 #include "abend.h"
43 #include "chartype.h"
44 #include "cmdline.h"
45 #include "cpu.h"
46 #include "debugflag.h"
47 #include "fname.h"
48 #include "mmodel.h"
49 #include "print.h"
50 #include "segnames.h"
51 #include "strbuf.h"
52 #include "target.h"
53 #include "tgttrans.h"
54 #include "version.h"
55 #include "xmalloc.h"
56
57 /* cc65 */
58 #include "asmcode.h"
59 #include "compile.h"
60 #include "codeopt.h"
61 #include "error.h"
62 #include "global.h"
63 #include "incpath.h"
64 #include "input.h"
65 #include "macrotab.h"
66 #include "output.h"
67 #include "scanner.h"
68 #include "segments.h"
69 #include "standard.h"
70
71
72
73 /*****************************************************************************/
74 /*                                   Code                                    */
75 /*****************************************************************************/
76
77
78
79 static void Usage (void)
80 /* Print usage information to stderr */
81 {
82     printf ("Usage: %s [options] file\n"
83             "Short options:\n"
84             "  -Cl\t\t\t\tMake local variables static\n"
85             "  -Dsym[=defn]\t\t\tDefine a symbol\n"
86             "  -E\t\t\t\tStop after the preprocessing stage\n"
87             "  -I dir\t\t\tSet an include directory search path\n"
88             "  -O\t\t\t\tOptimize code\n"
89             "  -Oi\t\t\t\tOptimize code, inline more code\n"
90             "  -Or\t\t\t\tEnable register variables\n"
91             "  -Os\t\t\t\tInline some known functions\n"
92             "  -T\t\t\t\tInclude source as comment\n"
93             "  -V\t\t\t\tPrint the compiler version number\n"
94             "  -W warning[,...]\t\tSuppress warnings\n"
95             "  -d\t\t\t\tDebug mode\n"
96             "  -g\t\t\t\tAdd debug info to object file\n"
97             "  -h\t\t\t\tHelp (this text)\n"
98             "  -j\t\t\t\tDefault characters are signed\n"
99             "  -mm model\t\t\tSet the memory model\n"
100             "  -o name\t\t\tName the output file\n"
101             "  -r\t\t\t\tEnable register variables\n"
102             "  -t sys\t\t\tSet the target system\n"
103             "  -v\t\t\t\tIncrease verbosity\n"
104             "\n"
105             "Long options:\n"
106             "  --add-source\t\t\tInclude source as comment\n"
107             "  --all-cdecl\t\t\tMake functions default to __cdecl__\n"
108             "  --bss-name seg\t\tSet the name of the BSS segment\n"
109             "  --check-stack\t\t\tGenerate stack overflow checks\n"
110             "  --code-name seg\t\tSet the name of the CODE segment\n"
111             "  --codesize x\t\t\tAccept larger code by factor x\n"
112             "  --cpu type\t\t\tSet cpu type (6502, 65c02)\n"
113             "  --create-dep name\t\tCreate a make dependency file\n"
114             "  --create-full-dep name\tCreate a full make dependency file\n"
115             "  --data-name seg\t\tSet the name of the DATA segment\n"
116             "  --debug\t\t\tDebug mode\n"
117             "  --debug-info\t\t\tAdd debug info to object file\n"
118             "  --debug-opt name\t\tDebug optimization steps\n"
119             "  --dep-target target\t\tUse this dependency target\n"
120             "  --disable-opt name\t\tDisable an optimization step\n"
121             "  --enable-opt name\t\tEnable an optimization step\n"
122             "  --help\t\t\tHelp (this text)\n"
123             "  --include-dir dir\t\tSet an include directory search path\n"
124             "  --list-opt-steps\t\tList all optimizer steps and exit\n"
125             "  --list-warnings\t\tList available warning types for -W\n"
126             "  --local-strings\t\tEmit string literals immediately\n"
127             "  --memory-model model\t\tSet the memory model\n"
128             "  --register-space b\t\tSet space available for register variables\n"
129             "  --register-vars\t\tEnable register variables\n"
130             "  --rodata-name seg\t\tSet the name of the RODATA segment\n"
131             "  --signed-chars\t\tDefault characters are signed\n"
132             "  --standard std\t\tLanguage standard (c89, c99, cc65)\n"
133             "  --static-locals\t\tMake local variables static\n"
134             "  --target sys\t\t\tSet the target system\n"
135             "  --verbose\t\t\tIncrease verbosity\n"
136             "  --version\t\t\tPrint the compiler version number\n"
137             "  --writable-strings\t\tMake string literals writable\n",
138             ProgName);
139 }
140
141
142
143 static void cbmsys (const char* sys)
144 /* Define a CBM system */
145 {
146     DefineNumericMacro ("__CBM__", 1);
147     DefineNumericMacro (sys, 1);
148 }
149
150
151
152 static void SetSys (const char* Sys)
153 /* Define a target system */
154 {
155     switch (Target = FindTarget (Sys)) {
156
157         case TGT_NONE:
158             break;
159
160         case TGT_MODULE:
161             AbEnd ("Cannot use `module' as a target for the compiler");
162             break;
163
164         case TGT_ATARI5200:
165             DefineNumericMacro ("__ATARI5200__", 1);
166             break;
167
168         case TGT_ATARI:
169             DefineNumericMacro ("__ATARI__", 1);
170             break;
171
172         case TGT_ATARIXL:
173             DefineNumericMacro ("__ATARI__", 1);
174             DefineNumericMacro ("__ATARIXL__", 1);
175             break;
176
177         case TGT_C16:
178             cbmsys ("__C16__");
179             break;
180
181         case TGT_C64:
182             cbmsys ("__C64__");
183             break;
184
185         case TGT_VIC20:
186             cbmsys ("__VIC20__");
187             break;
188
189         case TGT_C128:
190             cbmsys ("__C128__");
191             break;
192
193         case TGT_PLUS4:
194             cbmsys ("__C16__");
195             DefineNumericMacro ("__PLUS4__", 1);
196             break;
197
198         case TGT_CBM510:
199             cbmsys ("__CBM510__");
200             break;
201
202         case TGT_CBM610:
203             cbmsys ("__CBM610__");
204             break;
205
206         case TGT_PET:
207             cbmsys ("__PET__");
208             break;
209
210         case TGT_BBC:
211             DefineNumericMacro ("__BBC__", 1);
212             break;
213
214         case TGT_APPLE2:
215             DefineNumericMacro ("__APPLE2__", 1);
216             break;
217
218         case TGT_APPLE2ENH:
219             DefineNumericMacro ("__APPLE2__", 1);
220             DefineNumericMacro ("__APPLE2ENH__", 1);
221             break;
222
223         case TGT_GAMATE:
224             DefineNumericMacro ("__GAMATE__", 1);
225             break;
226
227         case TGT_GEOS_CBM:
228             /* Do not handle as a CBM system */
229             DefineNumericMacro ("__GEOS__", 1);
230             DefineNumericMacro ("__GEOS_CBM__", 1);
231             break;
232
233         case TGT_GEOS_APPLE:
234             DefineNumericMacro ("__GEOS__", 1);
235             DefineNumericMacro ("__GEOS_APPLE__", 1);
236             break;
237
238         case TGT_LUNIX:
239             DefineNumericMacro ("__LUNIX__", 1);
240             break;
241
242         case TGT_ATMOS:
243             DefineNumericMacro ("__ATMOS__", 1);
244             break;
245
246         case TGT_TELESTRAT:
247             DefineNumericMacro ("__TELESTRAT__", 1);
248             break;
249                                 
250         case TGT_NES:
251             DefineNumericMacro ("__NES__", 1);
252             break;
253
254         case TGT_SUPERVISION:
255             DefineNumericMacro ("__SUPERVISION__", 1);
256             break;
257
258         case TGT_LYNX:
259             DefineNumericMacro ("__LYNX__", 1);
260             break;
261
262         case TGT_SIM6502:
263             DefineNumericMacro ("__SIM6502__", 1);
264             break;
265
266         case TGT_SIM65C02:
267             DefineNumericMacro ("__SIM65C02__", 1);
268             break;
269
270         case TGT_OSIC1P:
271             DefineNumericMacro ("__OSIC1P__", 1);
272             break;
273
274         case TGT_PCENGINE:
275             DefineNumericMacro ("__PCE__", 1);
276             break;
277
278         default:
279             AbEnd ("Unknown target system type %d", Target);
280     }
281
282     /* Initialize the translation tables for the target system */
283     TgtTranslateInit ();
284 }
285
286
287
288 static void FileNameOption (const char* Opt, const char* Arg, StrBuf* Name)
289 /* Handle an option that remembers a file name for later */
290 {
291     /* Cannot have the option twice */
292     if (SB_NotEmpty (Name)) {
293         AbEnd ("Cannot use option `%s' twice", Opt);
294     }
295     /* Remember the file name for later */
296     SB_CopyStr (Name, Arg);
297     SB_Terminate (Name);
298 }
299
300
301
302 static void DefineSym (const char* Def)
303 /* Define a symbol on the command line */
304 {
305     const char* P = Def;
306
307     /* The symbol must start with a character or underline */
308     if (Def [0] != '_' && !IsAlpha (Def [0])) {
309         InvDef (Def);
310     }
311
312     /* Check the symbol name */
313     while (IsAlNum (*P) || *P == '_') {
314         ++P;
315     }
316
317     /* Do we have a value given? */
318     if (*P != '=') {
319         if (*P != '\0') {
320             InvDef (Def);
321         }
322         /* No value given. Define the macro with the value 1 */
323         DefineNumericMacro (Def, 1);
324     } else {
325         /* We have a value, P points to the '=' character. Since the argument
326         ** is const, create a copy and replace the '=' in the copy by a zero
327         ** terminator.
328         */
329         char* Q;
330         unsigned Len = strlen (Def)+1;
331         char* S = (char*) xmalloc (Len);
332         memcpy (S, Def, Len);
333         Q = S + (P - Def);
334         *Q++ = '\0';
335
336         /* Define this as a macro */
337         DefineTextMacro (S, Q);
338
339         /* Release the allocated memory */
340         xfree (S);
341     }
342 }
343
344
345
346 static void CheckSegName (const char* Seg)
347 /* Abort if the given name is not a valid segment name */
348 {
349     /* Print an error and abort if the name is not ok */
350     if (!ValidSegName (Seg)) {
351         AbEnd ("Segment name `%s' is invalid", Seg);
352     }
353 }
354
355
356
357 static void OptAddSource (const char* Opt attribute ((unused)),
358                           const char* Arg attribute ((unused)))
359 /* Add source lines as comments in generated assembler file */
360 {
361     AddSource = 1;
362 }
363
364
365
366 static void OptAllCDecl (const char* Opt attribute ((unused)),
367                          const char* Arg attribute ((unused)))
368 /* Make functions default to cdecl instead of fastcall. */
369 {
370     AutoCDecl = 1;
371 }
372
373
374
375 static void OptBssName (const char* Opt attribute ((unused)), const char* Arg)
376 /* Handle the --bss-name option */
377 {
378     /* Check for a valid name */
379     CheckSegName (Arg);
380
381     /* Set the name */
382     SetSegName (SEG_BSS, Arg);
383 }
384
385
386
387 static void OptCheckStack (const char* Opt attribute ((unused)),
388                            const char* Arg attribute ((unused)))
389 /* Handle the --check-stack option */
390 {
391     IS_Set (&CheckStack, 1);
392 }
393
394
395
396 static void OptCodeName (const char* Opt attribute ((unused)), const char* Arg)
397 /* Handle the --code-name option */
398 {
399     /* Check for a valid name */
400     CheckSegName (Arg);
401
402     /* Set the name */
403     SetSegName (SEG_CODE, Arg);
404 }
405
406
407
408 static void OptCodeSize (const char* Opt, const char* Arg)
409 /* Handle the --codesize option */
410 {
411     unsigned Factor;
412     char     BoundsCheck;
413
414     /* Numeric argument expected */
415     if (sscanf (Arg, "%u%c", &Factor, &BoundsCheck) != 1 ||
416         Factor < 10 || Factor > 1000) {
417         AbEnd ("Argument for %s is invalid", Opt);
418     }
419     IS_Set (&CodeSizeFactor, Factor);
420 }
421
422
423
424 static void OptCreateDep (const char* Opt, const char* Arg)
425 /* Handle the --create-dep option */
426 {
427     FileNameOption (Opt, Arg, &DepName);
428 }
429
430
431
432 static void OptCreateFullDep (const char* Opt attribute ((unused)),
433                               const char* Arg)
434 /* Handle the --create-full-dep option */
435 {
436     FileNameOption (Opt, Arg, &FullDepName);
437 }
438
439
440
441 static void OptCPU (const char* Opt, const char* Arg)
442 /* Handle the --cpu option */
443 {
444     /* Find the CPU from the given name */
445     CPU = FindCPU (Arg);
446     if (CPU != CPU_6502 && CPU != CPU_6502X && CPU != CPU_65SC02 &&
447         CPU != CPU_65C02 && CPU != CPU_65816 && CPU != CPU_HUC6280) {
448         AbEnd ("Invalid argument for %s: `%s'", Opt, Arg);
449     }
450 }
451
452
453
454 static void OptDataName (const char* Opt attribute ((unused)), const char* Arg)
455 /* Handle the --data-name option */
456 {
457     /* Check for a valid name */
458     CheckSegName (Arg);
459
460     /* Set the name */
461     SetSegName (SEG_DATA, Arg);
462 }
463
464
465
466 static void OptDebug (const char* Opt attribute ((unused)),
467                       const char* Arg attribute ((unused)))
468 /* Compiler debug mode */
469 {
470     ++Debug;
471 }
472
473
474
475 static void OptDebugInfo (const char* Opt attribute ((unused)),
476                           const char* Arg attribute ((unused)))
477 /* Add debug info to the object file */
478 {
479     DebugInfo = 1;
480 }
481
482
483
484 static void OptDebugOpt (const char* Opt attribute ((unused)), const char* Arg)
485 /* Debug optimization steps */
486 {
487     char Buf [128];
488     char* Line;
489
490     /* Open the file */
491     FILE* F = fopen (Arg, "r");
492     if (F == 0) {
493         AbEnd ("Cannot open `%s': %s", Arg, strerror (errno));
494     }
495
496     /* Read line by line, ignore empty lines and switch optimization
497     ** steps on/off.
498     */
499     while (fgets (Buf, sizeof (Buf), F) != 0) {
500
501         /* Remove trailing control chars. This will also remove the
502         ** trailing newline.
503         */
504         unsigned Len = strlen (Buf);
505         while (Len > 0 && IsControl (Buf[Len-1])) {
506             --Len;
507         }
508         Buf[Len] = '\0';
509
510         /* Get a pointer to the buffer and remove leading white space */
511         Line = Buf;
512         while (IsBlank (*Line)) {
513             ++Line;
514         }
515
516         /* Check the first character and enable/disable the step or
517         ** ignore the line
518         */
519         switch (*Line) {
520
521             case '\0':
522             case '#':
523             case ';':
524                 /* Empty or comment line */
525                 continue;
526
527             case '-':
528                 DisableOpt (Line+1);
529                 break;
530
531             case '+':
532                 ++Line;
533                 /* FALLTHROUGH */
534
535             default:
536                 EnableOpt (Line);
537                 break;
538
539         }
540
541     }
542
543     /* Close the file, no error check here since we were just reading and
544     ** this is only a debug function.
545     */
546     (void) fclose (F);
547 }
548
549
550
551 static void OptDebugOptOutput (const char* Opt attribute ((unused)), 
552                                const char* Arg attribute ((unused)))
553 /* Output optimization steps */
554 {
555     DebugOptOutput = 1;
556 }
557
558
559
560 static void OptDepTarget (const char* Opt attribute ((unused)), const char* Arg)
561 /* Handle the --dep-target option */
562 {
563     FileNameOption (Opt, Arg, &DepTarget);
564 }
565
566
567
568 static void OptDisableOpt (const char* Opt attribute ((unused)), const char* Arg)
569 /* Disable an optimization step */
570 {
571     DisableOpt (Arg);
572 }
573
574
575
576 static void OptEnableOpt (const char* Opt attribute ((unused)), const char* Arg)
577 /* Enable an optimization step */
578 {
579     EnableOpt (Arg);
580 }
581
582
583
584 static void OptHelp (const char* Opt attribute ((unused)),
585                      const char* Arg attribute ((unused)))
586 /* Print usage information and exit */
587 {
588     Usage ();
589     exit (EXIT_SUCCESS);
590 }
591
592
593
594 static void OptIncludeDir (const char* Opt attribute ((unused)), const char* Arg)
595 /* Add an include search path */
596 {
597     AddSearchPath (SysIncSearchPath, Arg);
598     AddSearchPath (UsrIncSearchPath, Arg);
599 }
600
601
602
603 static void OptListOptSteps (const char* Opt attribute ((unused)),
604                              const char* Arg attribute ((unused)))
605 /* List all optimizer steps */
606 {
607     /* List the optimizer steps */
608     ListOptSteps (stdout);
609
610     /* Terminate */
611     exit (EXIT_SUCCESS);
612 }
613
614
615
616 static void OptListWarnings (const char* Opt attribute ((unused)),
617                              const char* Arg attribute ((unused)))
618 /* List all warning types */
619 {
620     /* List the warnings */
621     ListWarnings (stdout);
622
623     /* Terminate */
624     exit (EXIT_SUCCESS);
625 }
626
627
628
629 static void OptLocalStrings (const char* Opt attribute ((unused)),
630                              const char* Arg attribute ((unused)))
631 /* Emit string literals immediately */
632 {
633     IS_Set (&LocalStrings, 1);
634 }
635
636
637
638 static void OptMemoryModel (const char* Opt, const char* Arg)
639 /* Set the memory model */
640 {
641     mmodel_t M;
642
643     /* Check the current memory model */
644     if (MemoryModel != MMODEL_UNKNOWN) {
645         AbEnd ("Cannot use option `%s' twice", Opt);
646     }
647
648     /* Translate the memory model name and check it */
649     M = FindMemoryModel (Arg);
650     if (M == MMODEL_UNKNOWN) {
651         AbEnd ("Unknown memory model: %s", Arg);
652     } else if (M == MMODEL_HUGE) {
653         AbEnd ("Unsupported memory model: %s", Arg);
654     }
655
656     /* Set the memory model */
657     SetMemoryModel (M);
658 }
659
660
661
662 static void OptRegisterSpace (const char* Opt, const char* Arg)
663 /* Handle the --register-space option */
664 {
665     /* Numeric argument expected */
666     if (sscanf (Arg, "%u", &RegisterSpace) != 1 || RegisterSpace > 256) {
667         AbEnd ("Argument for option %s is invalid", Opt);
668     }
669 }
670
671
672
673 static void OptRegisterVars (const char* Opt attribute ((unused)),
674                              const char* Arg attribute ((unused)))
675 /* Handle the --register-vars option */
676 {
677     IS_Set (&EnableRegVars, 1);
678 }
679
680
681
682 static void OptRodataName (const char* Opt attribute ((unused)), const char* Arg)
683 /* Handle the --rodata-name option */
684 {
685     /* Check for a valid name */
686     CheckSegName (Arg);
687
688     /* Set the name */
689     SetSegName (SEG_RODATA, Arg);
690 }
691
692
693
694 static void OptSignedChars (const char* Opt attribute ((unused)),
695                             const char* Arg attribute ((unused)))
696 /* Make default characters signed */
697 {
698     IS_Set (&SignedChars, 1);
699 }
700
701
702
703 static void OptStandard (const char* Opt, const char* Arg)
704 /* Handle the --standard option */
705 {
706     /* Find the standard from the given name */
707     standard_t Std = FindStandard (Arg);
708     if (Std == STD_UNKNOWN) {
709         AbEnd ("Invalid argument for %s: `%s'", Opt, Arg);
710     } else if (IS_Get (&Standard) != STD_UNKNOWN) {
711         AbEnd ("Option %s given more than once", Opt);
712     } else {
713         IS_Set (&Standard, Std);
714     }
715 }
716
717
718
719 static void OptStaticLocals (const char* Opt attribute ((unused)),
720                              const char* Arg attribute ((unused)))
721 /* Place local variables in static storage */
722 {
723     IS_Set (&StaticLocals, 1);
724 }
725
726
727
728 static void OptTarget (const char* Opt attribute ((unused)), const char* Arg)
729 /* Set the target system */
730 {
731     SetSys (Arg);
732 }
733
734
735
736 static void OptVerbose (const char* Opt attribute ((unused)),
737                         const char* Arg attribute ((unused)))
738 /* Increase verbosity */
739 {
740     ++Verbosity;
741 }
742
743
744
745 static void OptVersion (const char* Opt attribute ((unused)),
746                         const char* Arg attribute ((unused)))
747 /* Print the compiler version */
748 {
749     fprintf (stderr, "%s V%s\n", ProgName, GetVersionAsString ());
750     exit (EXIT_SUCCESS);
751 }
752
753
754
755 static void OptWarning (const char* Opt attribute ((unused)), const char* Arg)
756 /* Handle the -W option */
757 {
758     StrBuf W = AUTO_STRBUF_INITIALIZER;
759
760     /* Arg is a list of suboptions, separated by commas */
761     while (Arg) {
762
763         const char* Pos;
764         int         Enabled = 1;
765         IntStack*   S;
766
767         /* The suboption may be prefixed with '-' or '+' */
768         if (*Arg == '-') {
769             Enabled = 0;
770             ++Arg;
771         } else if (*Arg == '+') {
772             /* This is the default */
773             ++Arg;
774         }
775
776         /* Get the next suboption */
777         Pos = strchr (Arg, ',');
778         if (Pos) {
779             SB_CopyBuf (&W, Arg, Pos - Arg);
780             Arg = Pos + 1;
781         } else {
782             SB_CopyStr (&W, Arg);
783             Arg = 0;
784         }
785         SB_Terminate (&W);
786
787         /* Search for the warning */
788         S = FindWarning (SB_GetConstBuf (&W));
789         if (S == 0) {
790             InvArg (Opt, SB_GetConstBuf (&W));
791         }
792         IS_Set (S, Enabled);
793     }
794
795     /* Free allocated memory */
796     SB_Done (&W);
797 }
798
799
800
801 static void OptWritableStrings (const char* Opt attribute ((unused)),
802                                 const char* Arg attribute ((unused)))
803 /* Make string literals writable */
804 {
805     IS_Set (&WritableStrings, 1);
806 }
807
808
809
810 int main (int argc, char* argv[])
811 {
812     /* Program long options */
813     static const LongOpt OptTab[] = {
814         { "--add-source",       0,      OptAddSource            },
815         { "--all-cdecl",        0,      OptAllCDecl             },
816         { "--bss-name",         1,      OptBssName              },
817         { "--check-stack",      0,      OptCheckStack           },
818         { "--code-name",        1,      OptCodeName             },
819         { "--codesize",         1,      OptCodeSize             },
820         { "--cpu",              1,      OptCPU                  },
821         { "--create-dep",       1,      OptCreateDep            },
822         { "--create-full-dep",  1,      OptCreateFullDep        },
823         { "--data-name",        1,      OptDataName             },
824         { "--debug",            0,      OptDebug                },
825         { "--debug-info",       0,      OptDebugInfo            },
826         { "--debug-opt",        1,      OptDebugOpt             },
827         { "--debug-opt-output", 0,      OptDebugOptOutput       },
828         { "--dep-target",       1,      OptDepTarget            },
829         { "--disable-opt",      1,      OptDisableOpt           },
830         { "--enable-opt",       1,      OptEnableOpt            },
831         { "--help",             0,      OptHelp                 },
832         { "--include-dir",      1,      OptIncludeDir           },
833         { "--list-opt-steps",   0,      OptListOptSteps         },
834         { "--list-warnings",    0,      OptListWarnings         },
835         { "--local-strings",    0,      OptLocalStrings         },
836         { "--memory-model",     1,      OptMemoryModel          },
837         { "--register-space",   1,      OptRegisterSpace        },
838         { "--register-vars",    0,      OptRegisterVars         },
839         { "--rodata-name",      1,      OptRodataName           },
840         { "--signed-chars",     0,      OptSignedChars          },
841         { "--standard",         1,      OptStandard             },
842         { "--static-locals",    0,      OptStaticLocals         },
843         { "--target",           1,      OptTarget               },
844         { "--verbose",          0,      OptVerbose              },
845         { "--version",          0,      OptVersion              },
846         { "--writable-strings", 0,      OptWritableStrings      },
847     };
848
849     unsigned I;
850
851     /* Initialize the input file name */
852     const char* InputFile  = 0;
853
854     /* Initialize the cmdline module */
855     InitCmdLine (&argc, &argv, "cc65");
856
857     /* Initialize the default segment names */
858     InitSegNames ();
859
860     /* Initialize the include search paths */
861     InitIncludePaths ();
862
863     /* Parse the command line */
864     I = 1;
865     while (I < ArgCount) {
866
867         const char* P;
868
869         /* Get the argument */
870         const char* Arg = ArgVec[I];
871
872         /* Check for an option */
873         if (Arg[0] == '-') {
874
875             switch (Arg[1]) {
876
877                 case '-':
878                     LongOption (&I, OptTab, sizeof(OptTab)/sizeof(OptTab[0]));
879                     break;
880
881                 case 'd':
882                     OptDebug (Arg, 0);
883                     break;
884
885                 case 'h':
886                 case '?':
887                     OptHelp (Arg, 0);
888                     break;
889
890                 case 'g':
891                     OptDebugInfo (Arg, 0);
892                     break;
893
894                 case 'j':
895                     OptSignedChars (Arg, 0);
896                     break;
897
898                 case 'o':
899                     SetOutputName (GetArg (&I, 2));
900                     break;
901
902                 case 'r':
903                     OptRegisterVars (Arg, 0);
904                     break;
905
906                 case 't':
907                     OptTarget (Arg, GetArg (&I, 2));
908                     break;
909
910                 case 'u':
911                     OptCreateDep (Arg, 0);
912                     break;
913
914                 case 'v':
915                     OptVerbose (Arg, 0);
916                     break;
917
918                 case 'C':
919                     P = Arg + 2;
920                     while (*P) {
921                         switch (*P++) {
922                             case 'l':
923                                 OptStaticLocals (Arg, 0);
924                                 break;
925                             default:
926                                 UnknownOption (Arg);
927                                 break;
928                         }
929                     }
930                     break;
931
932                 case 'D':
933                     DefineSym (GetArg (&I, 2));
934                     break;
935
936                 case 'E':
937                     PreprocessOnly = 1;
938                     break;
939
940                 case 'I':
941                     OptIncludeDir (Arg, GetArg (&I, 2));
942                     break;
943
944                 case 'O':
945                     IS_Set (&Optimize, 1);
946                     P = Arg + 2;
947                     while (*P) {
948                         switch (*P++) {
949                             case 'i':
950                                 IS_Set (&CodeSizeFactor, 200);
951                                 break;
952                             case 'r':
953                                 IS_Set (&EnableRegVars, 1);
954                                 break;
955                             case 's':
956                                 IS_Set (&InlineStdFuncs, 1);
957                                 break;
958                         }
959                     }
960                     break;
961
962                 case 'T':
963                     OptAddSource (Arg, 0);
964                     break;
965
966                 case 'V':
967                     OptVersion (Arg, 0);
968                     break;
969
970                 case 'W':
971                     OptWarning (Arg, GetArg (&I, 2));
972                     break;
973
974                 default:
975                     UnknownOption (Arg);
976                     break;
977             }
978         } else {
979             if (InputFile) {
980                 fprintf (stderr, "additional file specs ignored\n");
981             } else {
982                 InputFile = Arg;
983             }
984         }
985
986         /* Next argument */
987         ++I;
988     }
989
990     /* Did we have a file spec on the command line? */
991     if (InputFile == 0) {
992         AbEnd ("No input files");
993     }
994
995     /* Add the default include search paths. */
996     FinishIncludePaths ();
997
998     /* Create the output file name if it was not explicitly given */
999     MakeDefaultOutputName (InputFile);
1000
1001     /* If no CPU given, use the default CPU for the target */
1002     if (CPU == CPU_UNKNOWN) {
1003         if (Target != TGT_UNKNOWN) {
1004             CPU = GetTargetProperties (Target)->DefaultCPU;
1005         } else {
1006             CPU = CPU_6502;
1007         }
1008     }
1009
1010     /* If no memory model was given, use the default */
1011     if (MemoryModel == MMODEL_UNKNOWN) {
1012         SetMemoryModel (MMODEL_NEAR);
1013     }
1014
1015     /* If no language standard was given, use the default one */
1016     if (IS_Get (&Standard) == STD_UNKNOWN) {
1017         IS_Set (&Standard, STD_DEFAULT);
1018     }
1019
1020     /* Go! */
1021     Compile (InputFile);
1022
1023     /* Create the output file if we didn't had any errors */
1024     if (PreprocessOnly == 0 && (ErrorCount == 0 || Debug)) {
1025
1026         /* Emit literals, externals, do cleanup and optimizations */
1027         FinishCompile ();
1028
1029         /* Open the file */
1030         OpenOutputFile ();
1031
1032         /* Write the output to the file */
1033         WriteAsmOutput ();
1034         Print (stdout, 1, "Wrote output to `%s'\n", OutputFilename);
1035
1036         /* Close the file, check for errors */
1037         CloseOutputFile ();
1038
1039         /* Create dependencies if requested */
1040         CreateDependencies ();
1041     }
1042
1043     /* Return an apropriate exit code */
1044     return (ErrorCount > 0)? EXIT_FAILURE : EXIT_SUCCESS;
1045 }