]> git.sur5r.net Git - openocd/history - tcl
rtos/mqx: prevent crash with -rtos auto
[openocd] / tcl /
2015-04-16 Andrey Yurovskyflash: at91samd: add SAML21 support, fix part ID issue
2015-04-16 Spencer Oliverdocs: update OpenOCD url's to openocd.org domain
2015-04-16 Paul Fertsertcl/target/stm32f3: fix reset init for stlink
2015-04-16 Felipe Balbiboard: ti_am43xx_evm: remove xds100v2 interface
2015-04-14 Tomas VanekAT91SAM4L: handle reset run/halt in SMAP
2015-04-14 Uwe Bonnesturtelizer2-revC: Tested with real hardware.
2015-04-14 Andreas Färbertcl/board: Add Infineon XMC 2Go config
2015-04-14 Andreas Färbertcl/board: Add Infineon XMC1100 Boot Kit config
2015-04-14 Andreas Färbertcl/target: Add Infineon XMC1000 family target config
2015-04-14 Andreas Färbertcl/board: Add Spansion SK-FM4-176L-S6E2CC config
2015-04-14 Andreas Färbertcl/target: Add Spansion FM4 config
2015-04-14 Ed Berosetem357: Corrected EM357 support including errata details
2015-04-14 Paul Fertsertcl/interface/parport: default to sane value on non...
2015-04-14 Jeff Ciesielskitcl/board: Add Infineon XMC4500 Relax Kit config
2015-04-14 Jeff Ciesielskitcl/board: Add Infineon XMC4200 Application Kit config
2015-04-14 Andreas Färbertcl/board: Add Infineon XMC4500 Application Kit configs
2015-04-14 Andreas Färbertcl/target: Add Infineon XMC4000 family config
2015-04-14 Felipe Balbitcl: icepick: add icepick_d_set_coreid
2015-04-14 Felipe Balbitarget: icepick: call icepick_c_setup
2015-04-14 Felipe Balbitarget: icepick: switch over to icepick_c_router
2015-04-14 Felipe Balbitcl: target: am437x: pass coreid
2015-04-14 Felipe Balbitarget: am437x: use more descriptive names
2015-04-14 Felipe Balbitarget: am437x: fix DebugSS DAP ID
2015-04-14 Felipe Balbitcl: board: add AM437x IDK support
2015-04-14 Felipe Balbitcl: am437x: add reset-init event handler
2015-04-14 Felipe Balbitcl: am437x: disable watchdog on reset-end
2015-04-14 Felipe Balbitcl: am437x: define registers to be used later
2015-04-14 Felipe Balbitcl: board: ti_am43xx_evm: follow xds100v2 requirements
2015-04-14 Felipe Balbitcl: board: ti_am437x_evm: select jtag transport
2015-04-14 Felipe Balbitcl: target: am437x: use entire SRAM area
2015-04-14 Felipe Balbitcl: target: am437x.cfg: pass correct dbgbase
2015-03-25 Uwe BonnesAdd configuration for EFM32 Gecko boards with Segger...
2015-03-25 Angus Grattontransport: make 'transport select' auto-select the...
2015-03-25 Paul Fertserdrivers/cmsis-dap: port to common SWD framework
2015-03-25 Paul Fertsertcl/board/twr-k60f120m: remove useless flash bank 0...
2015-03-25 Paul Fertserarmv7m: add generic trace support (TPIU, ITM, etc.)
2015-03-10 Uwe Bonnesstm32l1.cfg: Add missing dash to fix f7394049d3 commit.
2015-03-09 Andreas Fritiofsontcl: Add default hooks for STM32F3x
2015-03-09 Matthijs van Duintcl/interface/ftdi/xdsv2: fix and clarify EMU* signals
2015-03-09 Uwe Bonnesstm32l1.cfg: Add ID Code of Cat.2 devices.
2015-03-09 Uwe Bonnesstm32f3x.cfg: Remove duplicate item.
2015-03-09 Nemui Trinomiuslpc2000: Add LPC407x/8x flash size auto detection
2015-03-09 Arne Wichmanntarget & board: AT91SAM7A2 and Olimex SAM7-LA2
2015-02-22 Paul Fertsercfg: add board and target configs for TI SimpleLink...
2015-02-22 Uwe BonnesProvide genuine F3 nucleo config and source it for...
2015-02-22 Oleksij Rempeltcl/target|board: add configs for Alphascale asm9260t
2015-02-22 Andreas Fritiofsoncfg: Fix Kinetis kwikstik/kx config
2015-02-11 Anton Kuzmintcl/interface/ftdi: correct LED config for BusBlaster...
2015-02-11 Andreas Bomholtzsim3x: new flash driver for Silabs SiM3 microcontroller...
2015-02-11 Angus Grattonnrf51 - Add async loader. Performance on nrf51822QAA...
2015-02-11 Joerg FischerJ-Link serial number config option
2015-02-11 Oleksij Rempeltcl: add TP-LINK TL-MR3020 to the firmware recovery...
2015-02-11 Oleksij Rempeltcl/target|board: add config Atheros ar9331
2015-02-11 Pawel Simini51: support for Nuvoton NuMicro M051 series flash...
2015-02-11 Jacob Palssontcl/target: add CC2538 and CC26xx target files (with...
2015-02-11 Ed Berosetem357: added target files for em357 and em358
2015-02-11 Heinz Schweigercfg: TI Tiva C dk-tm4c129x Evaluation Kits
2015-02-11 Tomas Vanekpsoc4: support for Cypress PSoC 41xx/42xx family
2015-02-04 Paul Fertserflash/nor/stm32lx: use 0 base to autodetect second...
2015-02-02 Uwe BonnesAdd more STM32F3 IDs in target/stm32f3.cfg.
2015-01-30 Paul Fertsertcl/target: add lpc8xx.cfg
2015-01-26 Paul Fertsertcl/board: frdm kinetis boards have SRST connected
2015-01-26 Paul Fertsertcl/target/stellaris: Snowflake supports SYSRESETREQ too
2015-01-26 Paul Fertsertcl/target: consolidate Kinetis configs
2015-01-26 Thomas Eichingertcl/board: Add ST NUCLEO L152RE configuration
2015-01-26 Paul Fertsercfg: add srst_nogate to the supported targets, remove...
2015-01-26 Uwe Bonnesstm32f4/nucleo: Use only one configuration for all...
2015-01-26 Uwe Bonnesstm32f0/nucleo: Use only one configuration for all...
2015-01-15 Karl Palssontarget/stm32xx: Endian is not configurable.
2015-01-15 Paul Fertsertcl/interface/ftdi: add config for the IoT-LAB adapter
2015-01-15 Andreas Färbertcl/board: Add TI TMDX570LS20SUSB board config
2015-01-15 Karl Palssoncfg: stm32l1: Use specific chipname
2015-01-09 Spencer Olivercfg: fix lpc17xx regression
2014-12-03 Karl Palssonstm32l: split l0/l1 support no jtag, different HSI...
2014-12-03 Juha Niskanenstm32: Fix L0/1xx CPUTAPID setting and add new L1xx...
2014-11-24 Uwe Bonnestcl/target/stm32f4: ramp up JTAG speed, HSI is 16MHz...
2014-11-24 Uwe Bonnestcl/target/stm32f4x: add F401 and F411 IDs
2014-11-02 Paul Fertsertcl/interface/ftdi/swd-resistor-hack: clarify and add...
2014-10-16 Spencer Olivercmsis-dap: add serial number support
2014-10-06 Spencer Olivercfg: remove incorrect execute permissions
2014-10-06 Rémi PRUD'HOMMEstm32: Add config file for a new board STM32L052 dsicovery
2014-10-06 Rémi PRUD'HOMMEstm32: add L0xx CPUTAPID
2014-10-06 Paul Fertserinterface/ftdi/olimex-arm-usb-ocd-h: fix nTRST control...
2014-09-29 Karl Palssontcl/board: add TI Tiva C ek-tm4c1294xl config
2014-09-22 Andreas Fritiofsontarget: Remove "-variant" argument
2014-09-22 Austin PhillipsSupport hla_serial command for ST-LINK adapters.
2014-09-15 Nemui Trinomiuscfg: Added Nucleo-F411RE board config.
2014-09-15 Paul Fertsertcl/board/sheevaplug: add adapter_khz setting
2014-09-11 Paul Fertsertcl/interface/ftdi/sheevaplug: fix device description
2014-09-08 Vanya Sergeevcfg: refactor lpc1xxx targets onto one base config
2014-09-08 Бурага Александрtcl/target: add config for К1879ХБ1Я, a hybrid ARM11...
2014-09-08 Paul Fertsertcl/interface/ftdi: fix TRST for Olimex TINY adapters
2014-09-08 Paul Fertsertcl/interface/ftdi: add kt-link config (with SWD) for...
2014-09-08 Paul Fertsertcl/target/imx6: add yet another SJC tapid
2014-08-19 Paul Fertsertcl/interface/ftdi: auto-select SWD from converters...
2014-08-19 Eldar Khayrullintcl/board/stm32ldiscovery: fix breakage
2014-08-11 Andrey Smirnovtcl/board: Add board configuration for nRF51822-mKIT
2014-08-11 Angus GrattonnRF51822: Add workaround for PAN-16 where not all RAM...
2014-08-11 Andrey Skvortsovtcl/target: added support for TI OMAP/AM 3505 and 3517
2014-08-11 Paul FertserAllow transports to override the selected target (hla...
next