1 menu "ARM architecture"
10 select SYS_CACHE_SHIFT_6
13 config POSITION_INDEPENDENT
14 bool "Generate position-independent pre-relocation code"
16 U-Boot expects to be linked to a specific hard-coded address, and to
17 be loaded to and run from that address. This option lifts that
18 restriction, thus allowing the code to be loaded to and executed
19 from almost any address. This logic relies on the relocation
20 information that is embedded into the binary to support U-Boot
21 relocating itself to the top-of-RAM later during execution.
23 config SYS_INIT_SP_BSS_OFFSET
26 U-Boot typically uses a hard-coded value for the stack pointer
27 before relocation. Define this option to instead calculate the
28 initial SP at run-time. This is useful to avoid hard-coding addresses
29 into U-Boot, so that can be loaded and executed at arbitrary
30 addresses and thus avoid using arbitrary addresses at runtime. This
31 option's value is the offset added to &_bss_start in order to
32 calculate the stack pointer. This offset should be large enough so
33 that the early malloc region, global data (gd), and early stack usage
34 do not overlap any appended DTB.
36 config LINUX_KERNEL_IMAGE_HEADER
39 Place a Linux kernel image header at the start of the U-Boot binary.
40 The format of the header is described in the Linux kernel source at
41 Documentation/arm64/booting.txt. This feature is useful since the
42 image header reports the amount of memory (BSS and similar) that
43 U-Boot needs to use, but which isn't part of the binary.
45 if LINUX_KERNEL_IMAGE_HEADER
46 config LNX_KRNL_IMG_TEXT_OFFSET_BASE
49 The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the
50 TEXT_OFFSET value written in to the Linux kernel image header.
56 default y if ARM64 && !POSITION_INDEPENDENT
58 config DMA_ADDR_T_64BIT
68 # Used for compatibility with asm files copied from the kernel
69 config ARM_ASM_UNIFIED
73 # Used for compatibility with asm files copied from the kernel
77 # If set, the workarounds for these ARM errata are applied early during U-Boot
78 # startup. Note that in general these options force the workarounds to be
79 # applied; no CPU-type/version detection exists, unlike the similar options in
80 # the Linux kernel. Do not set these options unless they apply! Also note that
81 # the following can be machine specific errata. These do have ability to
82 # provide rudimentary version and machine specific checks, but expect no
84 # CONFIG_ARM_ERRATA_430973
85 # CONFIG_ARM_ERRATA_454179
86 # CONFIG_ARM_ERRATA_621766
87 # CONFIG_ARM_ERRATA_798870
88 # CONFIG_ARM_ERRATA_801819
89 config ARM_ERRATA_430973
92 config ARM_ERRATA_454179
95 config ARM_ERRATA_621766
98 config ARM_ERRATA_716044
101 config ARM_ERRATA_725233
104 config ARM_ERRATA_742230
107 config ARM_ERRATA_743622
110 config ARM_ERRATA_751472
113 config ARM_ERRATA_761320
116 config ARM_ERRATA_773022
119 config ARM_ERRATA_774769
122 config ARM_ERRATA_794072
125 config ARM_ERRATA_798870
128 config ARM_ERRATA_801819
131 config ARM_ERRATA_826974
134 config ARM_ERRATA_828024
137 config ARM_ERRATA_829520
140 config ARM_ERRATA_833069
143 config ARM_ERRATA_833471
146 config ARM_ERRATA_845369
149 config ARM_ERRATA_852421
152 config ARM_ERRATA_852423
155 config ARM_ERRATA_855873
160 select SYS_CACHE_SHIFT_5
164 select SYS_CACHE_SHIFT_5
168 select SYS_CACHE_SHIFT_5
172 select SYS_CACHE_SHIFT_5
176 select SYS_CACHE_SHIFT_5
181 select SYS_CACHE_SHIFT_5
187 select SYS_CACHE_SHIFT_6
193 select SYS_CACHE_SHIFT_5
197 select SYS_CACHE_SHIFT_5
201 select SYS_CACHE_SHIFT_5
204 default "arm720t" if CPU_ARM720T
205 default "arm920t" if CPU_ARM920T
206 default "arm926ejs" if CPU_ARM926EJS
207 default "arm946es" if CPU_ARM946ES
208 default "arm1136" if CPU_ARM1136
209 default "arm1176" if CPU_ARM1176
210 default "armv7" if CPU_V7
211 default "armv7m" if CPU_V7M
212 default "pxa" if CPU_PXA
213 default "sa1100" if CPU_SA1100
214 default "armv8" if ARM64
218 default 4 if CPU_ARM720T
219 default 4 if CPU_ARM920T
220 default 5 if CPU_ARM926EJS
221 default 5 if CPU_ARM946ES
222 default 6 if CPU_ARM1136
223 default 6 if CPU_ARM1176
227 default 4 if CPU_SA1100
230 config SYS_CACHE_SHIFT_5
233 config SYS_CACHE_SHIFT_6
236 config SYS_CACHE_SHIFT_7
239 config SYS_CACHELINE_SIZE
241 default 128 if SYS_CACHE_SHIFT_7
242 default 64 if SYS_CACHE_SHIFT_6
243 default 32 if SYS_CACHE_SHIFT_5
246 bool "Support for ARM SMC Calling Convention (SMCCC)"
247 depends on CPU_V7 || ARM64
250 Say Y here if you want to enable ARM SMC Calling Convention.
251 This should be enabled if U-Boot needs to communicate with system
252 firmware (for example, PSCI) according to SMCCC.
255 bool "support boot from semihosting"
257 In emulated environments, semihosting is a way for
258 the hosted environment to call out to the emulator to
259 retrieve files from the host machine.
261 config SYS_THUMB_BUILD
262 bool "Build U-Boot using the Thumb instruction set"
265 Use this flag to build U-Boot using the Thumb instruction set for
266 ARM architectures. Thumb instruction set provides better code
267 density. For ARM architectures that support Thumb2 this flag will
268 result in Thumb2 code generated by GCC.
270 config SPL_SYS_THUMB_BUILD
271 bool "Build SPL using the Thumb instruction set"
272 default y if SYS_THUMB_BUILD
275 Use this flag to build SPL using the Thumb instruction set for
276 ARM architectures. Thumb instruction set provides better code
277 density. For ARM architectures that support Thumb2 this flag will
278 result in Thumb2 code generated by GCC.
280 config SYS_L2CACHE_OFF
283 If SoC does not support L2CACHE or one do not want to enable
284 L2CACHE, choose this option.
286 config ENABLE_ARM_SOC_BOOT0_HOOK
287 bool "prepare BOOT0 header"
289 If the SoC's BOOT0 requires a header area filled with (magic)
290 values, then choose this option, and create a file included as
291 <asm/arch/boot0.h> which contains the required assembler code.
293 config ARM_CORTEX_CPU_IS_UP
297 config USE_ARCH_MEMCPY
298 bool "Use an assembly optimized implementation of memcpy"
302 Enable the generation of an optimized version of memcpy.
303 Such implementation may be faster under some conditions
304 but may increase the binary size.
306 config SPL_USE_ARCH_MEMCPY
307 bool "Use an assembly optimized implementation of memcpy for SPL"
308 default y if USE_ARCH_MEMCPY
311 Enable the generation of an optimized version of memcpy.
312 Such implementation may be faster under some conditions
313 but may increase the binary size.
315 config USE_ARCH_MEMSET
316 bool "Use an assembly optimized implementation of memset"
320 Enable the generation of an optimized version of memset.
321 Such implementation may be faster under some conditions
322 but may increase the binary size.
324 config SPL_USE_ARCH_MEMSET
325 bool "Use an assembly optimized implementation of memset for SPL"
326 default y if USE_ARCH_MEMSET
329 Enable the generation of an optimized version of memset.
330 Such implementation may be faster under some conditions
331 but may increase the binary size.
333 config ARM64_SUPPORT_AARCH32
334 bool "ARM64 system support AArch32 execution state"
335 default y if ARM64 && !TARGET_THUNDERX_88XX
337 This ARM64 system supports AArch32 execution state.
340 prompt "Target select"
345 select SPL_BOARD_INIT if SPL
347 config TARGET_EDB93XX
348 bool "Support edb93xx"
352 config TARGET_ASPENITE
353 bool "Support aspenite"
357 bool "Support gplugd"
365 Support for TI's DaVinci platform.
368 bool "Marvell Kirkwood"
370 select BOARD_EARLY_INIT_F
371 select ARCH_MISC_INIT
374 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
383 config TARGET_DEVKIT3250
384 bool "Support devkit3250"
388 config TARGET_WORK_92105
389 bool "Support work_92105"
402 config TARGET_SPEAR300
403 bool "Support spear300"
405 select BOARD_EARLY_INIT_F
409 config TARGET_SPEAR310
410 bool "Support spear310"
412 select BOARD_EARLY_INIT_F
416 config TARGET_SPEAR320
417 bool "Support spear320"
419 select BOARD_EARLY_INIT_F
423 config TARGET_SPEAR600
424 bool "Support spear600"
426 select BOARD_EARLY_INIT_F
430 config TARGET_STV0991
431 bool "Support stv0991"
442 select BOARD_LATE_INIT
447 config TARGET_MX31ADS
448 bool "Support mx31ads"
450 select BOARD_EARLY_INIT_F
452 config TARGET_MX31PDK
453 bool "Support mx31pdk"
454 select BOARD_LATE_INIT
457 select BOARD_EARLY_INIT_F
459 config TARGET_WOODBURN
460 bool "Support woodburn"
463 config TARGET_WOODBURN_SD
464 bool "Support woodburn_sd"
472 config TARGET_MX35PDK
473 bool "Support mx35pdk"
474 select BOARD_LATE_INIT
478 bool "Broadcom BCM283X family"
484 select SERIAL_SEARCH_ALL
487 config TARGET_VEXPRESS_CA15_TC2
488 bool "Support vexpress_ca15_tc2"
490 select CPU_V7_HAS_NONSEC
491 select CPU_V7_HAS_VIRT
494 config TARGET_VEXPRESS_CA5X2
495 bool "Support vexpress_ca5x2"
499 config TARGET_VEXPRESS_CA9X4
500 bool "Support vexpress_ca9x4"
504 config TARGET_BCM23550_W1D
505 bool "Support bcm23550_w1d"
510 config TARGET_BCM28155_AP
511 bool "Support bcm28155_ap"
516 config TARGET_BCMCYGNUS
517 bool "Support bcmcygnus"
525 imply BCM_SF2_ETH_GMAC
528 bool "Support bcmnsp"
532 bool "Support Broadcom Northstar2"
535 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit
536 ARMv8 Cortex-A57 processors targeting a broad range of networking
540 bool "Samsung EXYNOS"
551 bool "Samsung S5PC1XX"
559 bool "Calxeda Highbank"
563 config ARCH_INTEGRATOR
564 bool "ARM Ltd. Integrator family"
573 select SYS_THUMB_BUILD
579 config ARCH_OMAP2PLUS
582 select SPL_BOARD_INIT if SPL
583 select SPL_STACK_R if SPL
590 Support for the Meson SoC family developed by Amlogic Inc.,
591 targeted at media players and tablet computers. We currently
592 support the S905 (GXBaby) 64-bit SoC.
595 bool "NXP i.MX8M platform"
601 bool "NXP i.MX23 family"
612 bool "NXP i.MX28 family"
620 select ROM_UNIFIED_SECTIONS
626 select SYS_FSL_HAS_SEC if SECURE_BOOT
627 select SYS_FSL_SEC_COMPAT_4
628 select SYS_FSL_SEC_LE
629 select BOARD_EARLY_INIT_F
630 select ARCH_MISC_INIT
636 select SYS_FSL_HAS_SEC if SECURE_BOOT
637 select SYS_FSL_SEC_COMPAT_4
638 select SYS_FSL_SEC_LE
639 select SYS_THUMB_BUILD if SPL
644 default "arch/arm/mach-omap2/u-boot-spl.lds"
650 select BOARD_EARLY_INIT_F
654 bool "QEMU Virtual Platform"
661 bool "Renesas ARM SoCs"
664 select BOARD_EARLY_INIT_F
666 imply SYS_THUMB_BUILD
668 config TARGET_S32V234EVB
669 bool "Support s32v234evb"
671 select SYS_FSL_ERRATUM_ESDHC111
673 config ARCH_SNAPDRAGON
674 bool "Qualcomm Snapdragon SoCs"
684 bool "Altera SOCFPGA family"
688 select SPL_OF_CONTROL
690 select ENABLE_ARM_SOC_BOOT0_HOOK
691 select ARCH_EARLY_INIT_R
692 select ARCH_MISC_INIT
693 select SYS_THUMB_BUILD
700 imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
703 bool "Support sunxi (Allwinner) SoCs"
706 select CMD_MMC if MMC
707 select CMD_USB if DISTRO_DEFAULTS
713 select DM_USB if DISTRO_DEFAULTS
714 select OF_BOARD_SETUP
717 select SPL_STACK_R if SPL
718 select SPL_SYS_MALLOC_SIMPLE if SPL
720 select SPL_SYS_THUMB_BUILD if !ARM64
721 select SYS_THUMB_BUILD if !ARM64
722 select USB if DISTRO_DEFAULTS
723 select USB_STORAGE if DISTRO_DEFAULTS
724 select USB_KEYBOARD if DISTRO_DEFAULTS
725 select USE_TINY_PRINTF
728 imply OF_LIBFDT_OVERLAY
729 imply PRE_CONSOLE_BUFFER
730 imply SPL_GPIO_SUPPORT
731 imply SPL_LIBCOMMON_SUPPORT
732 imply SPL_LIBDISK_SUPPORT
733 imply SPL_LIBGENERIC_SUPPORT
734 imply SPL_MMC_SUPPORT if MMC
735 imply SPL_POWER_SUPPORT
736 imply SPL_SERIAL_SUPPORT
740 bool "Freescale Vybrid"
742 select SYS_FSL_ERRATUM_ESDHC111
747 bool "Xilinx Zynq based platform"
748 select BOARD_LATE_INIT
752 select SPL_BOARD_INIT if SPL
753 select SPL_OF_CONTROL if SPL
761 select SPL_SEPARATE_BSS if SPL
764 select SPL_CLK if SPL
771 bool "Xilinx ZynqMP based platform"
773 select BOARD_LATE_INIT
779 select SPL_BOARD_INIT if SPL
780 select SPL_CLK if SPL
788 config TARGET_VEXPRESS64_AEMV8A
789 bool "Support vexpress_aemv8a"
793 config TARGET_VEXPRESS64_BASE_FVP
794 bool "Support Versatile Express ARMv8a FVP BASE model"
799 config TARGET_VEXPRESS64_BASE_FVP_DRAM
800 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
804 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
805 the default config to allow the user to load the images directly into
806 DRAM using model parameters rather than by using semi-hosting to load
807 the files from the host filesystem.
809 config TARGET_VEXPRESS64_JUNO
810 bool "Support Versatile Express Juno Development Platform"
814 config TARGET_LS2080A_EMU
815 bool "Support ls2080a_emu"
818 select ARMV8_MULTIENTRY
819 select ARCH_MISC_INIT
821 Support for Freescale LS2080A_EMU platform
822 The LS2080A Development System (EMULATOR) is a pre silicon
823 development platform that supports the QorIQ LS2080A
824 Layerscape Architecture processor.
826 config TARGET_LS2080A_SIMU
827 bool "Support ls2080a_simu"
830 select ARMV8_MULTIENTRY
831 select ARCH_MISC_INIT
833 Support for Freescale LS2080A_SIMU platform
834 The LS2080A Development System (QDS) is a pre silicon
835 development platform that supports the QorIQ LS2080A
836 Layerscape Architecture processor.
838 config TARGET_LS1088AQDS
839 bool "Support ls1088aqds"
842 select ARMV8_MULTIENTRY
843 select ARCH_MISC_INIT
844 select BOARD_LATE_INIT
847 Support for NXP LS1088AQDS platform
848 The LS1088A Development System (QDS) is a high-performance
849 development platform that supports the QorIQ LS1088A
850 Layerscape Architecture processor.
852 config TARGET_LS2080AQDS
853 bool "Support ls2080aqds"
856 select ARMV8_MULTIENTRY
857 select BOARD_LATE_INIT
859 select ARCH_MISC_INIT
863 Support for Freescale LS2080AQDS platform
864 The LS2080A Development System (QDS) is a high-performance
865 development platform that supports the QorIQ LS2080A
866 Layerscape Architecture processor.
868 config TARGET_LS2080ARDB
869 bool "Support ls2080ardb"
872 select ARMV8_MULTIENTRY
873 select BOARD_LATE_INIT
875 select ARCH_MISC_INIT
879 Support for Freescale LS2080ARDB platform.
880 The LS2080A Reference design board (RDB) is a high-performance
881 development platform that supports the QorIQ LS2080A
882 Layerscape Architecture processor.
884 config TARGET_LS2081ARDB
885 bool "Support ls2081ardb"
888 select ARMV8_MULTIENTRY
889 select BOARD_LATE_INIT
891 select ARCH_MISC_INIT
893 Support for Freescale LS2081ARDB platform.
894 The LS2081A Reference design board (RDB) is a high-performance
895 development platform that supports the QorIQ LS2081A/LS2041A
896 Layerscape Architecture processor.
899 bool "Support HiKey 96boards Consumer Edition Platform"
907 Support for HiKey 96boards platform. It features a HI6220
908 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
911 bool "Support Poplar 96boards Enterprise Edition Platform"
919 Support for Poplar 96boards EE platform. It features a HI3798cv200
920 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU
921 making it capable of running any commercial set-top solution based on
924 config TARGET_LS1012AQDS
925 bool "Support ls1012aqds"
928 select BOARD_LATE_INIT
930 Support for Freescale LS1012AQDS platform.
931 The LS1012A Development System (QDS) is a high-performance
932 development platform that supports the QorIQ LS1012A
933 Layerscape Architecture processor.
935 config TARGET_LS1012ARDB
936 bool "Support ls1012ardb"
939 select BOARD_LATE_INIT
943 Support for Freescale LS1012ARDB platform.
944 The LS1012A Reference design board (RDB) is a high-performance
945 development platform that supports the QorIQ LS1012A
946 Layerscape Architecture processor.
948 config TARGET_LS1012A2G5RDB
949 bool "Support ls1012a2g5rdb"
952 select BOARD_LATE_INIT
955 Support for Freescale LS1012A2G5RDB platform.
956 The LS1012A 2G5 Reference design board (RDB) is a high-performance
957 development platform that supports the QorIQ LS1012A
958 Layerscape Architecture processor.
960 config TARGET_LS1012AFRDM
961 bool "Support ls1012afrdm"
965 Support for Freescale LS1012AFRDM platform.
966 The LS1012A Freedom board (FRDM) is a high-performance
967 development platform that supports the QorIQ LS1012A
968 Layerscape Architecture processor.
970 config TARGET_LS1088ARDB
971 bool "Support ls1088ardb"
974 select ARMV8_MULTIENTRY
975 select ARCH_MISC_INIT
976 select BOARD_LATE_INIT
979 Support for NXP LS1088ARDB platform.
980 The LS1088A Reference design board (RDB) is a high-performance
981 development platform that supports the QorIQ LS1088A
982 Layerscape Architecture processor.
984 config TARGET_LS1021AQDS
985 bool "Support ls1021aqds"
986 select BOARD_LATE_INIT
988 select CPU_V7_HAS_NONSEC
989 select CPU_V7_HAS_VIRT
992 select ARCH_SUPPORT_PSCI
993 select LS1_DEEP_SLEEP
995 select BOARD_EARLY_INIT_F
998 config TARGET_LS1021ATWR
999 bool "Support ls1021atwr"
1000 select BOARD_LATE_INIT
1002 select CPU_V7_HAS_NONSEC
1003 select CPU_V7_HAS_VIRT
1006 select ARCH_SUPPORT_PSCI
1007 select LS1_DEEP_SLEEP
1008 select BOARD_EARLY_INIT_F
1011 config TARGET_LS1021AIOT
1012 bool "Support ls1021aiot"
1013 select BOARD_LATE_INIT
1015 select CPU_V7_HAS_NONSEC
1016 select CPU_V7_HAS_VIRT
1019 select ARCH_SUPPORT_PSCI
1022 Support for Freescale LS1021AIOT platform.
1023 The LS1021A Freescale board (IOT) is a high-performance
1024 development platform that supports the QorIQ LS1021A
1025 Layerscape Architecture processor.
1027 config TARGET_LS1043AQDS
1028 bool "Support ls1043aqds"
1031 select ARMV8_MULTIENTRY
1032 select BOARD_LATE_INIT
1034 select BOARD_EARLY_INIT_F
1037 Support for Freescale LS1043AQDS platform.
1039 config TARGET_LS1043ARDB
1040 bool "Support ls1043ardb"
1043 select ARMV8_MULTIENTRY
1044 select BOARD_LATE_INIT
1046 select BOARD_EARLY_INIT_F
1049 Support for Freescale LS1043ARDB platform.
1051 config TARGET_LS1046AQDS
1052 bool "Support ls1046aqds"
1055 select ARMV8_MULTIENTRY
1056 select BOARD_LATE_INIT
1058 select DM_SPI_FLASH if DM_SPI
1059 select BOARD_EARLY_INIT_F
1062 Support for Freescale LS1046AQDS platform.
1063 The LS1046A Development System (QDS) is a high-performance
1064 development platform that supports the QorIQ LS1046A
1065 Layerscape Architecture processor.
1067 config TARGET_LS1046ARDB
1068 bool "Support ls1046ardb"
1071 select ARMV8_MULTIENTRY
1072 select BOARD_LATE_INIT
1074 select DM_SPI_FLASH if DM_SPI
1075 select POWER_MC34VR500
1076 select BOARD_EARLY_INIT_F
1079 Support for Freescale LS1046ARDB platform.
1080 The LS1046A Reference Design Board (RDB) is a high-performance
1081 development platform that supports the QorIQ LS1046A
1082 Layerscape Architecture processor.
1085 bool "Support h2200"
1088 config TARGET_ZIPITZ2
1089 bool "Support zipitz2"
1092 config TARGET_COLIBRI_PXA270
1093 bool "Support colibri_pxa270"
1096 config ARCH_UNIPHIER
1097 bool "Socionext UniPhier SoCs"
1098 select BOARD_LATE_INIT
1109 select SPL_BOARD_INIT if SPL
1110 select SPL_DM if SPL
1111 select SPL_LIBCOMMON_SUPPORT if SPL
1112 select SPL_LIBGENERIC_SUPPORT if SPL
1113 select SPL_OF_CONTROL if SPL
1114 select SPL_PINCTRL if SPL
1118 Support for UniPhier SoC family developed by Socionext Inc.
1119 (formerly, System LSI Business Division of Panasonic Corporation)
1122 bool "Support STM32"
1126 select SYS_THUMB_BUILD
1129 bool "Support STMicrolectronics SoCs"
1137 Support for STMicroelectronics STiH407/10 SoC family.
1138 This SoC is used on Linaro 96Board STiH410-B2260
1140 config ARCH_ROCKCHIP
1141 bool "Support Rockchip SoCs"
1145 select SPL_DM if SPL
1147 select SYS_THUMB_BUILD if !ARM64
1148 select SPL_SYS_MALLOC_SIMPLE if SPL
1155 select DM_USB if USB
1158 select ENABLE_ARM_SOC_BOOT0_HOOK
1162 imply USB_FUNCTION_FASTBOOT
1166 imply SARADC_ROCKCHIP
1168 config TARGET_THUNDERX_88XX
1169 bool "Support ThunderX 88xx"
1172 select SYS_CACHE_SHIFT_7
1176 bool "Support Aspeed SoCs"
1182 config TI_SECURE_DEVICE
1183 bool "HS Device Type Support"
1184 depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS
1186 If a high secure (HS) device type is being used, this config
1187 must be set. This option impacts various aspects of the
1188 build system (to create signed boot images that can be
1189 authenticated) and the code. See the doc/README.ti-secure
1190 file for further details.
1192 source "arch/arm/mach-aspeed/Kconfig"
1194 source "arch/arm/mach-at91/Kconfig"
1196 source "arch/arm/mach-bcm283x/Kconfig"
1198 source "arch/arm/mach-davinci/Kconfig"
1200 source "arch/arm/mach-exynos/Kconfig"
1202 source "arch/arm/mach-highbank/Kconfig"
1204 source "arch/arm/mach-integrator/Kconfig"
1206 source "arch/arm/mach-keystone/Kconfig"
1208 source "arch/arm/mach-kirkwood/Kconfig"
1210 source "arch/arm/mach-mvebu/Kconfig"
1212 source "arch/arm/cpu/armv7/ls102xa/Kconfig"
1214 source "arch/arm/mach-imx/mx2/Kconfig"
1216 source "arch/arm/mach-imx/mx5/Kconfig"
1218 source "arch/arm/mach-imx/mx6/Kconfig"
1220 source "arch/arm/mach-imx/mx7/Kconfig"
1222 source "arch/arm/mach-imx/mx7ulp/Kconfig"
1224 source "arch/arm/mach-imx/mx8m/Kconfig"
1226 source "arch/arm/mach-imx/mxs/Kconfig"
1228 source "arch/arm/mach-omap2/Kconfig"
1230 source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
1232 source "arch/arm/mach-orion5x/Kconfig"
1234 source "arch/arm/mach-rmobile/Kconfig"
1236 source "arch/arm/mach-meson/Kconfig"
1238 source "arch/arm/mach-qemu/Kconfig"
1240 source "arch/arm/mach-rockchip/Kconfig"
1242 source "arch/arm/mach-s5pc1xx/Kconfig"
1244 source "arch/arm/mach-snapdragon/Kconfig"
1246 source "arch/arm/mach-socfpga/Kconfig"
1248 source "arch/arm/mach-sti/Kconfig"
1250 source "arch/arm/mach-stm32/Kconfig"
1252 source "arch/arm/mach-sunxi/Kconfig"
1254 source "arch/arm/mach-tegra/Kconfig"
1256 source "arch/arm/mach-uniphier/Kconfig"
1258 source "arch/arm/cpu/armv7/vf610/Kconfig"
1260 source "arch/arm/mach-zynq/Kconfig"
1262 source "arch/arm/cpu/armv7/Kconfig"
1264 source "arch/arm/cpu/armv8/zynqmp/Kconfig"
1266 source "arch/arm/cpu/armv8/Kconfig"
1268 source "arch/arm/mach-imx/Kconfig"
1270 source "board/bosch/shc/Kconfig"
1271 source "board/CarMediaLab/flea3/Kconfig"
1272 source "board/Marvell/aspenite/Kconfig"
1273 source "board/Marvell/gplugd/Kconfig"
1274 source "board/armadeus/apf27/Kconfig"
1275 source "board/armltd/vexpress/Kconfig"
1276 source "board/armltd/vexpress64/Kconfig"
1277 source "board/broadcom/bcm23550_w1d/Kconfig"
1278 source "board/broadcom/bcm28155_ap/Kconfig"
1279 source "board/broadcom/bcmcygnus/Kconfig"
1280 source "board/broadcom/bcmnsp/Kconfig"
1281 source "board/broadcom/bcmns2/Kconfig"
1282 source "board/cavium/thunderx/Kconfig"
1283 source "board/cirrus/edb93xx/Kconfig"
1284 source "board/eets/pdu001/Kconfig"
1285 source "board/freescale/ls2080a/Kconfig"
1286 source "board/freescale/ls2080aqds/Kconfig"
1287 source "board/freescale/ls2080ardb/Kconfig"
1288 source "board/freescale/ls1088a/Kconfig"
1289 source "board/freescale/ls1021aqds/Kconfig"
1290 source "board/freescale/ls1043aqds/Kconfig"
1291 source "board/freescale/ls1021atwr/Kconfig"
1292 source "board/freescale/ls1021aiot/Kconfig"
1293 source "board/freescale/ls1046aqds/Kconfig"
1294 source "board/freescale/ls1043ardb/Kconfig"
1295 source "board/freescale/ls1046ardb/Kconfig"
1296 source "board/freescale/ls1012aqds/Kconfig"
1297 source "board/freescale/ls1012ardb/Kconfig"
1298 source "board/freescale/ls1012afrdm/Kconfig"
1299 source "board/freescale/mx31ads/Kconfig"
1300 source "board/freescale/mx31pdk/Kconfig"
1301 source "board/freescale/mx35pdk/Kconfig"
1302 source "board/freescale/s32v234evb/Kconfig"
1303 source "board/gdsys/a38x/Kconfig"
1304 source "board/grinn/chiliboard/Kconfig"
1305 source "board/gumstix/pepper/Kconfig"
1306 source "board/h2200/Kconfig"
1307 source "board/hisilicon/hikey/Kconfig"
1308 source "board/hisilicon/poplar/Kconfig"
1309 source "board/isee/igep003x/Kconfig"
1310 source "board/phytec/pcm051/Kconfig"
1311 source "board/silica/pengwyn/Kconfig"
1312 source "board/spear/spear300/Kconfig"
1313 source "board/spear/spear310/Kconfig"
1314 source "board/spear/spear320/Kconfig"
1315 source "board/spear/spear600/Kconfig"
1316 source "board/spear/x600/Kconfig"
1317 source "board/st/stv0991/Kconfig"
1318 source "board/tcl/sl50/Kconfig"
1319 source "board/birdland/bav335x/Kconfig"
1320 source "board/timll/devkit3250/Kconfig"
1321 source "board/toradex/colibri_pxa270/Kconfig"
1322 source "board/vscom/baltos/Kconfig"
1323 source "board/woodburn/Kconfig"
1324 source "board/work-microwave/work_92105/Kconfig"
1325 source "board/zipitz2/Kconfig"
1327 source "arch/arm/Kconfig.debug"
1332 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if ARCH_MX23 || ARCH_MX28
1333 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
1334 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64