git.sur5r.net Git - u-boot/blob - arch/arm/dts/dra7.dtsi

   1 /*
   2  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  * Based on "omap4.dtsi"
   8  */
   9
  10 #include <dt-bindings/interrupt-controller/arm-gic.h>
  11 #include <dt-bindings/pinctrl/dra.h>
  12
  13 #define MAX_SOURCES 400
  14
  15 / {
  16         #address-cells = <2>;
  17         #size-cells = <2>;
  18
  19         compatible = "ti,dra7xx";
  20         interrupt-parent = <&crossbar_mpu>;
  21         chosen { };
  22
  23         aliases {
  24                 i2c0 = &i2c1;
  25                 i2c1 = &i2c2;
  26                 i2c2 = &i2c3;
  27                 i2c3 = &i2c4;
  28                 i2c4 = &i2c5;
  29                 serial0 = &uart1;
  30                 serial1 = &uart2;
  31                 serial2 = &uart3;
  32                 serial3 = &uart4;
  33                 serial4 = &uart5;
  34                 serial5 = &uart6;
  35                 serial6 = &uart7;
  36                 serial7 = &uart8;
  37                 serial8 = &uart9;
  38                 serial9 = &uart10;
  39                 ethernet0 = &cpsw_emac0;
  40                 ethernet1 = &cpsw_emac1;
  41                 d_can0 = &dcan1;
  42                 d_can1 = &dcan2;
  43                 spi0 = &qspi;
  44         };
  45
  46         timer {
  47                 compatible = "arm,armv7-timer";
  48                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
  49                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
  50                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
  51                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
  52                 interrupt-parent = <&gic>;
  53         };
  54
  55         gic: interrupt-controller@48211000 {
  56                 compatible = "arm,cortex-a15-gic";
  57                 interrupt-controller;
  58                 #interrupt-cells = <3>;
  59                 reg = <0x0 0x48211000 0x0 0x1000>,
  60                       <0x0 0x48212000 0x0 0x2000>,
  61                       <0x0 0x48214000 0x0 0x2000>,
  62                       <0x0 0x48216000 0x0 0x2000>;
  63                 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
  64                 interrupt-parent = <&gic>;
  65         };
  66
  67         wakeupgen: interrupt-controller@48281000 {
  68                 compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
  69                 interrupt-controller;
  70                 #interrupt-cells = <3>;
  71                 reg = <0x0 0x48281000 0x0 0x1000>;
  72                 interrupt-parent = <&gic>;
  73         };
  74
  75         cpus {
  76                 #address-cells = <1>;
  77                 #size-cells = <0>;
  78
  79                 cpu0: cpu@0 {
  80                         device_type = "cpu";
  81                         compatible = "arm,cortex-a15";
  82                         reg = <0>;
  83
  84                         operating-points-v2 = <&cpu0_opp_table>;
  85
  86                         clocks = <&dpll_mpu_ck>;
  87                         clock-names = "cpu";
  88
  89                         clock-latency = <300000>; /* From omap-cpufreq driver */
  90
  91                         /* cooling options */
  92                         cooling-min-level = <0>;
  93                         cooling-max-level = <2>;
  94                         #cooling-cells = <2>; /* min followed by max */
  95                 };
  96         };
  97
  98         cpu0_opp_table: opp-table {
  99                 compatible = "operating-points-v2-ti-cpu";
 100                 syscon = <&scm_wkup>;
 101
 102                 opp_nom-1000000000 {
 103                         opp-hz = /bits/ 64 <1000000000>;
 104                         opp-microvolt = <1060000 850000 1150000>;
 105                         opp-supported-hw = <0xFF 0x01>;
 106                         opp-suspend;
 107                 };
 108
 109                 opp_od-1176000000 {
 110                         opp-hz = /bits/ 64 <1176000000>;
 111                         opp-microvolt = <1160000 885000 1160000>;
 112                         opp-supported-hw = <0xFF 0x02>;
 113                 };
 114         };
 115
 116         /*
 117          * The soc node represents the soc top level view. It is used for IPs
 118          * that are not memory mapped in the MPU view or for the MPU itself.
 119          */
 120         soc {
 121                 compatible = "ti,omap-infra";
 122                 mpu {
 123                         compatible = "ti,omap5-mpu";
 124                         ti,hwmods = "mpu";
 125                 };
 126         };
 127
 128         /*
 129          * XXX: Use a flat representation of the SOC interconnect.
 130          * The real OMAP interconnect network is quite complex.
 131          * Since it will not bring real advantage to represent that in DT for
 132          * the moment, just use a fake OCP bus entry to represent the whole bus
 133          * hierarchy.
 134          */
 135         ocp {
 136                 compatible = "ti,dra7-l3-noc", "simple-bus";
 137                 #address-cells = <1>;
 138                 #size-cells = <1>;
 139                 ranges = <0x0 0x0 0x0 0xc0000000>;
 140                 ti,hwmods = "l3_main_1", "l3_main_2";
 141                 reg = <0x0 0x44000000 0x0 0x1000000>,
 142                       <0x0 0x45000000 0x0 0x1000>;
 143                 interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
 144                                       <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 145
 146                 l4_cfg: l4@4a000000 {
 147                         compatible = "ti,dra7-l4-cfg", "simple-bus";
 148                         #address-cells = <1>;
 149                         #size-cells = <1>;
 150                         ranges = <0 0x4a000000 0x22c000>;
 151
 152                         scm: scm@2000 {
 153                                 compatible = "ti,dra7-scm-core", "simple-bus";
 154                                 reg = <0x2000 0x2000>;
 155                                 #address-cells = <1>;
 156                                 #size-cells = <1>;
 157                                 ranges = <0 0x2000 0x2000>;
 158
 159                                 scm_conf: scm_conf@0 {
 160                                         compatible = "syscon", "simple-bus";
 161                                         reg = <0x0 0x1400>;
 162                                         #address-cells = <1>;
 163                                         #size-cells = <1>;
 164                                         ranges = <0 0x0 0x1400>;
 165
 166                                         pbias_regulator: pbias_regulator@e00 {
 167                                                 compatible = "ti,pbias-dra7", "ti,pbias-omap";
 168                                                 reg = <0xe00 0x4>;
 169                                                 syscon = <&scm_conf>;
 170                                                 pbias_mmc_reg: pbias_mmc_omap5 {
 171                                                         regulator-name = "pbias_mmc_omap5";
 172                                                         regulator-min-microvolt = <1800000>;
 173                                                         regulator-max-microvolt = <3000000>;
 174                                                 };
 175                                         };
 176
 177                                         scm_conf_clocks: clocks {
 178                                                 #address-cells = <1>;
 179                                                 #size-cells = <0>;
 180                                         };
 181                                 };
 182
 183                                 dra7_pmx_core: pinmux@1400 {
 184                                         compatible = "ti,dra7-padconf",
 185                                                      "pinctrl-single";
 186                                         reg = <0x1400 0x0468>;
 187                                         #address-cells = <1>;
 188                                         #size-cells = <0>;
 189                                         #pinctrl-cells = <1>;
 190                                         #interrupt-cells = <1>;
 191                                         interrupt-controller;
 192                                         pinctrl-single,register-width = <32>;
 193                                         pinctrl-single,function-mask = <0x3fffffff>;
 194                                 };
 195
 196                                 scm_conf1: scm_conf@1c04 {
 197                                         compatible = "syscon";
 198                                         reg = <0x1c04 0x0020>;
 199                                         #syscon-cells = <2>;
 200                                 };
 201
 202                                 scm_conf_pcie: scm_conf@1c24 {
 203                                         compatible = "syscon";
 204                                         reg = <0x1c24 0x0024>;
 205                                 };
 206
 207                                 sdma_xbar: dma-router@b78 {
 208                                         compatible = "ti,dra7-dma-crossbar";
 209                                         reg = <0xb78 0xfc>;
 210                                         #dma-cells = <1>;
 211                                         dma-requests = <205>;
 212                                         ti,dma-safe-map = <0>;
 213                                         dma-masters = <&sdma>;
 214                                 };
 215
 216                                 edma_xbar: dma-router@c78 {
 217                                         compatible = "ti,dra7-dma-crossbar";
 218                                         reg = <0xc78 0x7c>;
 219                                         #dma-cells = <2>;
 220                                         dma-requests = <204>;
 221                                         ti,dma-safe-map = <0>;
 222                                         dma-masters = <&edma>;
 223                                 };
 224                         };
 225
 226                         cm_core_aon: cm_core_aon@5000 {
 227                                 compatible = "ti,dra7-cm-core-aon";
 228                                 reg = <0x5000 0x2000>;
 229
 230                                 cm_core_aon_clocks: clocks {
 231                                         #address-cells = <1>;
 232                                         #size-cells = <0>;
 233                                 };
 234
 235                                 cm_core_aon_clockdomains: clockdomains {
 236                                 };
 237                         };
 238
 239                         cm_core: cm_core@8000 {
 240                                 compatible = "ti,dra7-cm-core";
 241                                 reg = <0x8000 0x3000>;
 242
 243                                 cm_core_clocks: clocks {
 244                                         #address-cells = <1>;
 245                                         #size-cells = <0>;
 246                                 };
 247
 248                                 cm_core_clockdomains: clockdomains {
 249                                 };
 250                         };
 251                 };
 252
 253                 l4_wkup: l4@4ae00000 {
 254                         compatible = "ti,dra7-l4-wkup", "simple-bus";
 255                         #address-cells = <1>;
 256                         #size-cells = <1>;
 257                         ranges = <0 0x4ae00000 0x3f000>;
 258
 259                         counter32k: counter@4000 {
 260                                 compatible = "ti,omap-counter32k";
 261                                 reg = <0x4000 0x40>;
 262                                 ti,hwmods = "counter_32k";
 263                         };
 264
 265                         prm: prm@6000 {
 266                                 compatible = "ti,dra7-prm";
 267                                 reg = <0x6000 0x3000>;
 268                                 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 269
 270                                 prm_clocks: clocks {
 271                                         #address-cells = <1>;
 272                                         #size-cells = <0>;
 273                                 };
 274
 275                                 prm_clockdomains: clockdomains {
 276                                 };
 277                         };
 278
 279                         scm_wkup: scm_conf@c000 {
 280                                 compatible = "syscon";
 281                                 reg = <0xc000 0x1000>;
 282                         };
 283                 };
 284
 285                 axi@0 {
 286                         compatible = "simple-bus";
 287                         #size-cells = <1>;
 288                         #address-cells = <1>;
 289                         ranges = <0x51000000 0x51000000 0x3000
 290                                   0x0        0x20000000 0x10000000>;
 291                         /**
 292                          * To enable PCI endpoint mode, disable the pcie1_rc
 293                          * node and enable pcie1_ep mode.
 294                          */
 295                         pcie1_rc: pcie@51000000 {
 296                                 compatible = "ti,dra7-pcie";
 297                                 reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
 298                                 reg-names = "rc_dbics", "ti_conf", "config";
 299                                 interrupts = <0 232 0x4>, <0 233 0x4>;
 300                                 #address-cells = <3>;
 301                                 #size-cells = <2>;
 302                                 device_type = "pci";
 303                                 ranges = <0x81000000 0 0          0x03000 0 0x00010000
 304                                           0x82000000 0 0x20013000 0x13000 0 0xffed000>;
 305                                 bus-range = <0x00 0xff>;
 306                                 #interrupt-cells = <1>;
 307                                 num-lanes = <1>;
 308                                 linux,pci-domain = <0>;
 309                                 ti,hwmods = "pcie1";
 310                                 phys = <&pcie1_phy>;
 311                                 phy-names = "pcie-phy0";
 312                                 interrupt-map-mask = <0 0 0 7>;
 313                                 interrupt-map = <0 0 0 1 &pcie1_intc 1>,
 314                                                 <0 0 0 2 &pcie1_intc 2>,
 315                                                 <0 0 0 3 &pcie1_intc 3>,
 316                                                 <0 0 0 4 &pcie1_intc 4>;
 317                                 status = "disabled";
 318                                 pcie1_intc: interrupt-controller {
 319                                         interrupt-controller;
 320                                         #address-cells = <0>;
 321                                         #interrupt-cells = <1>;
 322                                 };
 323                         };
 324
 325                         pcie1_ep: pcie_ep@51000000 {
 326                                 compatible = "ti,dra7-pcie-ep";
 327                                 reg = <0x51000000 0x28>, <0x51002000 0x14c>, <0x51001000 0x28>, <0x1000 0x10000000>;
 328                                 reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space";
 329                                 interrupts = <0 232 0x4>;
 330                                 num-lanes = <1>;
 331                                 num-ib-windows = <4>;
 332                                 num-ob-windows = <16>;
 333                                 ti,hwmods = "pcie1";
 334                                 phys = <&pcie1_phy>;
 335                                 phy-names = "pcie-phy0";
 336                                 ti,syscon-unaligned-access = <&scm_conf1 0x14 2>;
 337                                 status = "disabled";
 338                         };
 339                 };
 340
 341                 axi@1 {
 342                         compatible = "simple-bus";
 343                         #size-cells = <1>;
 344                         #address-cells = <1>;
 345                         ranges = <0x51800000 0x51800000 0x3000
 346                                   0x0        0x30000000 0x10000000>;
 347                         status = "disabled";
 348                         pcie@51800000 {
 349                                 compatible = "ti,dra7-pcie";
 350                                 reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
 351                                 reg-names = "rc_dbics", "ti_conf", "config";
 352                                 interrupts = <0 355 0x4>, <0 356 0x4>;
 353                                 #address-cells = <3>;
 354                                 #size-cells = <2>;
 355                                 device_type = "pci";
 356                                 ranges = <0x81000000 0 0          0x03000 0 0x00010000
 357                                           0x82000000 0 0x30013000 0x13000 0 0xffed000>;
 358                                 bus-range = <0x00 0xff>;
 359                                 #interrupt-cells = <1>;
 360                                 num-lanes = <1>;
 361                                 linux,pci-domain = <1>;
 362                                 ti,hwmods = "pcie2";
 363                                 phys = <&pcie2_phy>;
 364                                 phy-names = "pcie-phy0";
 365                                 interrupt-map-mask = <0 0 0 7>;
 366                                 interrupt-map = <0 0 0 1 &pcie2_intc 1>,
 367                                                 <0 0 0 2 &pcie2_intc 2>,
 368                                                 <0 0 0 3 &pcie2_intc 3>,
 369                                                 <0 0 0 4 &pcie2_intc 4>;
 370                                 pcie2_intc: interrupt-controller {
 371                                         interrupt-controller;
 372                                         #address-cells = <0>;
 373                                         #interrupt-cells = <1>;
 374                                 };
 375                         };
 376                 };
 377
 378                 ocmcram1: ocmcram@40300000 {
 379                         compatible = "mmio-sram";
 380                         reg = <0x40300000 0x80000>;
 381                         ranges = <0x0 0x40300000 0x80000>;
 382                         #address-cells = <1>;
 383                         #size-cells = <1>;
 384                         /*
 385                          * This is a placeholder for an optional reserved
 386                          * region for use by secure software. The size
 387                          * of this region is not known until runtime so it
 388                          * is set as zero to either be updated to reserve
 389                          * space or left unchanged to leave all SRAM for use.
 390                          * On HS parts that that require the reserved region
 391                          * either the bootloader can update the size to
 392                          * the required amount or the node can be overridden
 393                          * from the board dts file for the secure platform.
 394                          */
 395                         sram-hs@0 {
 396                                 compatible = "ti,secure-ram";
 397                                 reg = <0x0 0x0>;
 398                         };
 399                 };
 400
 401                 /*
 402                  * NOTE: ocmcram2 and ocmcram3 are not available on all
 403                  * DRA7xx and AM57xx variants. Confirm availability in
 404                  * the data manual for the exact part number in use
 405                  * before enabling these nodes in the board dts file.
 406                  */
 407                 ocmcram2: ocmcram@40400000 {
 408                         status = "disabled";
 409                         compatible = "mmio-sram";
 410                         reg = <0x40400000 0x100000>;
 411                         ranges = <0x0 0x40400000 0x100000>;
 412                         #address-cells = <1>;
 413                         #size-cells = <1>;
 414                 };
 415
 416                 ocmcram3: ocmcram@40500000 {
 417                         status = "disabled";
 418                         compatible = "mmio-sram";
 419                         reg = <0x40500000 0x100000>;
 420                         ranges = <0x0 0x40500000 0x100000>;
 421                         #address-cells = <1>;
 422                         #size-cells = <1>;
 423                 };
 424
 425                 bandgap: bandgap@4a0021e0 {
 426                         reg = <0x4a0021e0 0xc
 427                                 0x4a00232c 0xc
 428                                 0x4a002380 0x2c
 429                                 0x4a0023C0 0x3c
 430                                 0x4a002564 0x8
 431                                 0x4a002574 0x50>;
 432                                 compatible = "ti,dra752-bandgap";
 433                                 interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 434                                 #thermal-sensor-cells = <1>;
 435                 };
 436
 437                 dsp1_system: dsp_system@40d00000 {
 438                         compatible = "syscon";
 439                         reg = <0x40d00000 0x100>;
 440                 };
 441
 442                 dra7_iodelay_core: padconf@4844a000 {
 443                         compatible = "ti,dra7-iodelay";
 444                         reg = <0x4844a000 0x0d1c>;
 445                         #address-cells = <1>;
 446                         #size-cells = <0>;
 447                         #pinctrl-cells = <2>;
 448                 };
 449
 450                 sdma: dma-controller@4a056000 {
 451                         compatible = "ti,omap4430-sdma";
 452                         reg = <0x4a056000 0x1000>;
 453                         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
 454                                      <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
 455                                      <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
 456                                      <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 457                         #dma-cells = <1>;
 458                         dma-channels = <32>;
 459                         dma-requests = <127>;
 460                 };
 461
 462                 edma: edma@43300000 {
 463                         compatible = "ti,edma3-tpcc";
 464                         ti,hwmods = "tpcc";
 465                         reg = <0x43300000 0x100000>;
 466                         reg-names = "edma3_cc";
 467                         interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
 468                                      <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
 469                                      <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
 470                         interrupt-names = "edma3_ccint", "edma3_mperr",
 471                                           "edma3_ccerrint";
 472                         dma-requests = <64>;
 473                         #dma-cells = <2>;
 474
 475                         ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
 476
 477                         /*
 478                          * memcpy is disabled, can be enabled with:
 479                          * ti,edma-memcpy-channels = <20 21>;
 480                          * for example. Note that these channels need to be
 481                          * masked in the xbar as well.
 482                          */
 483                 };
 484
 485                 edma_tptc0: tptc@43400000 {
 486                         compatible = "ti,edma3-tptc";
 487                         ti,hwmods = "tptc0";
 488                         reg =   <0x43400000 0x100000>;
 489                         interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
 490                         interrupt-names = "edma3_tcerrint";
 491                 };
 492
 493                 edma_tptc1: tptc@43500000 {
 494                         compatible = "ti,edma3-tptc";
 495                         ti,hwmods = "tptc1";
 496                         reg =   <0x43500000 0x100000>;
 497                         interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 498                         interrupt-names = "edma3_tcerrint";
 499                 };
 500
 501                 gpio1: gpio@4ae10000 {
 502                         compatible = "ti,omap4-gpio";
 503                         reg = <0x4ae10000 0x200>;
 504                         interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 505                         ti,hwmods = "gpio1";
 506                         gpio-controller;
 507                         #gpio-cells = <2>;
 508                         interrupt-controller;
 509                         #interrupt-cells = <2>;
 510                 };
 511
 512                 gpio2: gpio@48055000 {
 513                         compatible = "ti,omap4-gpio";
 514                         reg = <0x48055000 0x200>;
 515                         interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 516                         ti,hwmods = "gpio2";
 517                         gpio-controller;
 518                         #gpio-cells = <2>;
 519                         interrupt-controller;
 520                         #interrupt-cells = <2>;
 521                 };
 522
 523                 gpio3: gpio@48057000 {
 524                         compatible = "ti,omap4-gpio";
 525                         reg = <0x48057000 0x200>;
 526                         interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 527                         ti,hwmods = "gpio3";
 528                         gpio-controller;
 529                         #gpio-cells = <2>;
 530                         interrupt-controller;
 531                         #interrupt-cells = <2>;
 532                 };
 533
 534                 gpio4: gpio@48059000 {
 535                         compatible = "ti,omap4-gpio";
 536                         reg = <0x48059000 0x200>;
 537                         interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
 538                         ti,hwmods = "gpio4";
 539                         gpio-controller;
 540                         #gpio-cells = <2>;
 541                         interrupt-controller;
 542                         #interrupt-cells = <2>;
 543                 };
 544
 545                 gpio5: gpio@4805b000 {
 546                         compatible = "ti,omap4-gpio";
 547                         reg = <0x4805b000 0x200>;
 548                         interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 549                         ti,hwmods = "gpio5";
 550                         gpio-controller;
 551                         #gpio-cells = <2>;
 552                         interrupt-controller;
 553                         #interrupt-cells = <2>;
 554                 };
 555
 556                 gpio6: gpio@4805d000 {
 557                         compatible = "ti,omap4-gpio";
 558                         reg = <0x4805d000 0x200>;
 559                         interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 560                         ti,hwmods = "gpio6";
 561                         gpio-controller;
 562                         #gpio-cells = <2>;
 563                         interrupt-controller;
 564                         #interrupt-cells = <2>;
 565                 };
 566
 567                 gpio7: gpio@48051000 {
 568                         compatible = "ti,omap4-gpio";
 569                         reg = <0x48051000 0x200>;
 570                         interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 571                         ti,hwmods = "gpio7";
 572                         gpio-controller;
 573                         #gpio-cells = <2>;
 574                         interrupt-controller;
 575                         #interrupt-cells = <2>;
 576                 };
 577
 578                 gpio8: gpio@48053000 {
 579                         compatible = "ti,omap4-gpio";
 580                         reg = <0x48053000 0x200>;
 581                         interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 582                         ti,hwmods = "gpio8";
 583                         gpio-controller;
 584                         #gpio-cells = <2>;
 585                         interrupt-controller;
 586                         #interrupt-cells = <2>;
 587                 };
 588
 589                 uart1: serial@4806a000 {
 590                         compatible = "ti,dra742-uart", "ti,omap4-uart";
 591                         reg = <0x4806a000 0x100>;
 592                         interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 593                         ti,hwmods = "uart1";
 594                         clock-frequency = <48000000>;
 595                         status = "disabled";
 596                         dmas = <&sdma_xbar 49>, <&sdma_xbar 50>;
 597                         dma-names = "tx", "rx";
 598                 };
 599
 600                 uart2: serial@4806c000 {
 601                         compatible = "ti,dra742-uart", "ti,omap4-uart";
 602                         reg = <0x4806c000 0x100>;
 603                         interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 604                         ti,hwmods = "uart2";
 605                         clock-frequency = <48000000>;
 606                         status = "disabled";
 607                         dmas = <&sdma_xbar 51>, <&sdma_xbar 52>;
 608                         dma-names = "tx", "rx";
 609                 };
 610
 611                 uart3: serial@48020000 {
 612                         compatible = "ti,dra742-uart", "ti,omap4-uart";
 613                         reg = <0x48020000 0x100>;
 614                         interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 615                         ti,hwmods = "uart3";
 616                         clock-frequency = <48000000>;
 617                         status = "disabled";
 618                         dmas = <&sdma_xbar 53>, <&sdma_xbar 54>;
 619                         dma-names = "tx", "rx";
 620                 };
 621
 622                 uart4: serial@4806e000 {
 623                         compatible = "ti,dra742-uart", "ti,omap4-uart";
 624                         reg = <0x4806e000 0x100>;
 625                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 626                         ti,hwmods = "uart4";
 627                         clock-frequency = <48000000>;
 628                         status = "disabled";
 629                         dmas = <&sdma_xbar 55>, <&sdma_xbar 56>;
 630                         dma-names = "tx", "rx";
 631                 };
 632
 633                 uart5: serial@48066000 {
 634                         compatible = "ti,dra742-uart", "ti,omap4-uart";
 635                         reg = <0x48066000 0x100>;
 636                         interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 637                         ti,hwmods = "uart5";
 638                         clock-frequency = <48000000>;
 639                         status = "disabled";
 640                         dmas = <&sdma_xbar 63>, <&sdma_xbar 64>;
 641                         dma-names = "tx", "rx";
 642                 };
 643
 644                 uart6: serial@48068000 {
 645                         compatible = "ti,dra742-uart", "ti,omap4-uart";
 646                         reg = <0x48068000 0x100>;
 647                         interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 648                         ti,hwmods = "uart6";
 649                         clock-frequency = <48000000>;
 650                         status = "disabled";
 651                         dmas = <&sdma_xbar 79>, <&sdma_xbar 80>;
 652                         dma-names = "tx", "rx";
 653                 };
 654
 655                 uart7: serial@48420000 {
 656                         compatible = "ti,dra742-uart", "ti,omap4-uart";
 657                         reg = <0x48420000 0x100>;
 658                         interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
 659                         ti,hwmods = "uart7";
 660                         clock-frequency = <48000000>;
 661                         status = "disabled";
 662                 };
 663
 664                 uart8: serial@48422000 {
 665                         compatible = "ti,dra742-uart", "ti,omap4-uart";
 666                         reg = <0x48422000 0x100>;
 667                         interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
 668                         ti,hwmods = "uart8";
 669                         clock-frequency = <48000000>;
 670                         status = "disabled";
 671                 };
 672
 673                 uart9: serial@48424000 {
 674                         compatible = "ti,dra742-uart", "ti,omap4-uart";
 675                         reg = <0x48424000 0x100>;
 676                         interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
 677                         ti,hwmods = "uart9";
 678                         clock-frequency = <48000000>;
 679                         status = "disabled";
 680                 };
 681
 682                 uart10: serial@4ae2b000 {
 683                         compatible = "ti,dra742-uart", "ti,omap4-uart";
 684                         reg = <0x4ae2b000 0x100>;
 685                         interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 686                         ti,hwmods = "uart10";
 687                         clock-frequency = <48000000>;
 688                         status = "disabled";
 689                 };
 690
 691                 mailbox1: mailbox@4a0f4000 {
 692                         compatible = "ti,omap4-mailbox";
 693                         reg = <0x4a0f4000 0x200>;
 694                         interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
 695                                      <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
 696                                      <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 697                         ti,hwmods = "mailbox1";
 698                         #mbox-cells = <1>;
 699                         ti,mbox-num-users = <3>;
 700                         ti,mbox-num-fifos = <8>;
 701                         status = "disabled";
 702                 };
 703
 704                 mailbox2: mailbox@4883a000 {
 705                         compatible = "ti,omap4-mailbox";
 706                         reg = <0x4883a000 0x200>;
 707                         interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
 708                                      <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
 709                                      <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
 710                                      <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
 711                         ti,hwmods = "mailbox2";
 712                         #mbox-cells = <1>;
 713                         ti,mbox-num-users = <4>;
 714                         ti,mbox-num-fifos = <12>;
 715                         status = "disabled";
 716                 };
 717
 718                 mailbox3: mailbox@4883c000 {
 719                         compatible = "ti,omap4-mailbox";
 720                         reg = <0x4883c000 0x200>;
 721                         interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
 722                                      <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
 723                                      <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
 724                                      <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
 725                         ti,hwmods = "mailbox3";
 726                         #mbox-cells = <1>;
 727                         ti,mbox-num-users = <4>;
 728                         ti,mbox-num-fifos = <12>;
 729                         status = "disabled";
 730                 };
 731
 732                 mailbox4: mailbox@4883e000 {
 733                         compatible = "ti,omap4-mailbox";
 734                         reg = <0x4883e000 0x200>;
 735                         interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
 736                                      <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
 737                                      <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
 738                                      <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
 739                         ti,hwmods = "mailbox4";
 740                         #mbox-cells = <1>;
 741                         ti,mbox-num-users = <4>;
 742                         ti,mbox-num-fifos = <12>;
 743                         status = "disabled";
 744                 };
 745
 746                 mailbox5: mailbox@48840000 {
 747                         compatible = "ti,omap4-mailbox";
 748                         reg = <0x48840000 0x200>;
 749                         interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
 750                                      <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
 751                                      <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
 752                                      <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
 753                         ti,hwmods = "mailbox5";
 754                         #mbox-cells = <1>;
 755                         ti,mbox-num-users = <4>;
 756                         ti,mbox-num-fifos = <12>;
 757                         status = "disabled";
 758                 };
 759
 760                 mailbox6: mailbox@48842000 {
 761                         compatible = "ti,omap4-mailbox";
 762                         reg = <0x48842000 0x200>;
 763                         interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
 764                                      <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
 765                                      <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
 766                                      <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
 767                         ti,hwmods = "mailbox6";
 768                         #mbox-cells = <1>;
 769                         ti,mbox-num-users = <4>;
 770                         ti,mbox-num-fifos = <12>;
 771                         status = "disabled";
 772                 };
 773
 774                 mailbox7: mailbox@48844000 {
 775                         compatible = "ti,omap4-mailbox";
 776                         reg = <0x48844000 0x200>;
 777                         interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
 778                                      <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
 779                                      <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
 780                                      <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>;
 781                         ti,hwmods = "mailbox7";
 782                         #mbox-cells = <1>;
 783                         ti,mbox-num-users = <4>;
 784                         ti,mbox-num-fifos = <12>;
 785                         status = "disabled";
 786                 };
 787
 788                 mailbox8: mailbox@48846000 {
 789                         compatible = "ti,omap4-mailbox";
 790                         reg = <0x48846000 0x200>;
 791                         interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
 792                                      <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
 793                                      <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
 794                                      <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
 795                         ti,hwmods = "mailbox8";
 796                         #mbox-cells = <1>;
 797                         ti,mbox-num-users = <4>;
 798                         ti,mbox-num-fifos = <12>;
 799                         status = "disabled";
 800                 };
 801
 802                 mailbox9: mailbox@4885e000 {
 803                         compatible = "ti,omap4-mailbox";
 804                         reg = <0x4885e000 0x200>;
 805                         interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
 806                                      <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
 807                                      <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
 808                                      <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
 809                         ti,hwmods = "mailbox9";
 810                         #mbox-cells = <1>;
 811                         ti,mbox-num-users = <4>;
 812                         ti,mbox-num-fifos = <12>;
 813                         status = "disabled";
 814                 };
 815
 816                 mailbox10: mailbox@48860000 {
 817                         compatible = "ti,omap4-mailbox";
 818                         reg = <0x48860000 0x200>;
 819                         interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
 820                                      <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
 821                                      <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
 822                                      <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
 823                         ti,hwmods = "mailbox10";
 824                         #mbox-cells = <1>;
 825                         ti,mbox-num-users = <4>;
 826                         ti,mbox-num-fifos = <12>;
 827                         status = "disabled";
 828                 };
 829
 830                 mailbox11: mailbox@48862000 {
 831                         compatible = "ti,omap4-mailbox";
 832                         reg = <0x48862000 0x200>;
 833                         interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
 834                                      <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
 835                                      <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
 836                                      <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
 837                         ti,hwmods = "mailbox11";
 838                         #mbox-cells = <1>;
 839                         ti,mbox-num-users = <4>;
 840                         ti,mbox-num-fifos = <12>;
 841                         status = "disabled";
 842                 };
 843
 844                 mailbox12: mailbox@48864000 {
 845                         compatible = "ti,omap4-mailbox";
 846                         reg = <0x48864000 0x200>;
 847                         interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
 848                                      <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
 849                                      <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
 850                                      <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
 851                         ti,hwmods = "mailbox12";
 852                         #mbox-cells = <1>;
 853                         ti,mbox-num-users = <4>;
 854                         ti,mbox-num-fifos = <12>;
 855                         status = "disabled";
 856                 };
 857
 858                 mailbox13: mailbox@48802000 {
 859                         compatible = "ti,omap4-mailbox";
 860                         reg = <0x48802000 0x200>;
 861                         interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
 862                                      <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
 863                                      <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
 864                                      <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>;
 865                         ti,hwmods = "mailbox13";
 866                         #mbox-cells = <1>;
 867                         ti,mbox-num-users = <4>;
 868                         ti,mbox-num-fifos = <12>;
 869                         status = "disabled";
 870                 };
 871
 872                 timer1: timer@4ae18000 {
 873                         compatible = "ti,omap5430-timer";
 874                         reg = <0x4ae18000 0x80>;
 875                         interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 876                         ti,hwmods = "timer1";
 877                         ti,timer-alwon;
 878                 };
 879
 880                 timer2: timer@48032000 {
 881                         compatible = "ti,omap5430-timer";
 882                         reg = <0x48032000 0x80>;
 883                         interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 884                         ti,hwmods = "timer2";
 885                 };
 886
 887                 timer3: timer@48034000 {
 888                         compatible = "ti,omap5430-timer";
 889                         reg = <0x48034000 0x80>;
 890                         interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 891                         ti,hwmods = "timer3";
 892                 };
 893
 894                 timer4: timer@48036000 {
 895                         compatible = "ti,omap5430-timer";
 896                         reg = <0x48036000 0x80>;
 897                         interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 898                         ti,hwmods = "timer4";
 899                 };
 900
 901                 timer5: timer@48820000 {
 902                         compatible = "ti,omap5430-timer";
 903                         reg = <0x48820000 0x80>;
 904                         interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 905                         ti,hwmods = "timer5";
 906                 };
 907
 908                 timer6: timer@48822000 {
 909                         compatible = "ti,omap5430-timer";
 910                         reg = <0x48822000 0x80>;
 911                         interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 912                         ti,hwmods = "timer6";
 913                 };
 914
 915                 timer7: timer@48824000 {
 916                         compatible = "ti,omap5430-timer";
 917                         reg = <0x48824000 0x80>;
 918                         interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 919                         ti,hwmods = "timer7";
 920                 };
 921
 922                 timer8: timer@48826000 {
 923                         compatible = "ti,omap5430-timer";
 924                         reg = <0x48826000 0x80>;
 925                         interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 926                         ti,hwmods = "timer8";
 927                 };
 928
 929                 timer9: timer@4803e000 {
 930                         compatible = "ti,omap5430-timer";
 931                         reg = <0x4803e000 0x80>;
 932                         interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 933                         ti,hwmods = "timer9";
 934                 };
 935
 936                 timer10: timer@48086000 {
 937                         compatible = "ti,omap5430-timer";
 938                         reg = <0x48086000 0x80>;
 939                         interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 940                         ti,hwmods = "timer10";
 941                 };
 942
 943                 timer11: timer@48088000 {
 944                         compatible = "ti,omap5430-timer";
 945                         reg = <0x48088000 0x80>;
 946                         interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 947                         ti,hwmods = "timer11";
 948                 };
 949
 950                 timer12: timer@4ae20000 {
 951                         compatible = "ti,omap5430-timer";
 952                         reg = <0x4ae20000 0x80>;
 953                         interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 954                         ti,hwmods = "timer12";
 955                         ti,timer-alwon;
 956                         ti,timer-secure;
 957                 };
 958
 959                 timer13: timer@48828000 {
 960                         compatible = "ti,omap5430-timer";
 961                         reg = <0x48828000 0x80>;
 962                         interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
 963                         ti,hwmods = "timer13";
 964                 };
 965
 966                 timer14: timer@4882a000 {
 967                         compatible = "ti,omap5430-timer";
 968                         reg = <0x4882a000 0x80>;
 969                         interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
 970                         ti,hwmods = "timer14";
 971                 };
 972
 973                 timer15: timer@4882c000 {
 974                         compatible = "ti,omap5430-timer";
 975                         reg = <0x4882c000 0x80>;
 976                         interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
 977                         ti,hwmods = "timer15";
 978                 };
 979
 980                 timer16: timer@4882e000 {
 981                         compatible = "ti,omap5430-timer";
 982                         reg = <0x4882e000 0x80>;
 983                         interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
 984                         ti,hwmods = "timer16";
 985                 };
 986
 987                 wdt2: wdt@4ae14000 {
 988                         compatible = "ti,omap3-wdt";
 989                         reg = <0x4ae14000 0x80>;
 990                         interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 991                         ti,hwmods = "wd_timer2";
 992                 };
 993
 994                 hwspinlock: spinlock@4a0f6000 {
 995                         compatible = "ti,omap4-hwspinlock";
 996                         reg = <0x4a0f6000 0x1000>;
 997                         ti,hwmods = "spinlock";
 998                         #hwlock-cells = <1>;
 999                 };
1000
1001                 dmm@4e000000 {
1002                         compatible = "ti,omap5-dmm";
1003                         reg = <0x4e000000 0x800>;
1004                         interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
1005                         ti,hwmods = "dmm";
1006                 };
1007
1008                 i2c1: i2c@48070000 {
1009                         compatible = "ti,omap4-i2c";
1010                         reg = <0x48070000 0x100>;
1011                         interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
1012                         #address-cells = <1>;
1013                         #size-cells = <0>;
1014                         ti,hwmods = "i2c1";
1015                         status = "disabled";
1016                 };
1017
1018                 i2c2: i2c@48072000 {
1019                         compatible = "ti,omap4-i2c";
1020                         reg = <0x48072000 0x100>;
1021                         interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
1022                         #address-cells = <1>;
1023                         #size-cells = <0>;
1024                         ti,hwmods = "i2c2";
1025                         status = "disabled";
1026                 };
1027
1028                 i2c3: i2c@48060000 {
1029                         compatible = "ti,omap4-i2c";
1030                         reg = <0x48060000 0x100>;
1031                         interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
1032                         #address-cells = <1>;
1033                         #size-cells = <0>;
1034                         ti,hwmods = "i2c3";
1035                         status = "disabled";
1036                 };
1037
1038                 i2c4: i2c@4807a000 {
1039                         compatible = "ti,omap4-i2c";
1040                         reg = <0x4807a000 0x100>;
1041                         interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
1042                         #address-cells = <1>;
1043                         #size-cells = <0>;
1044                         ti,hwmods = "i2c4";
1045                         status = "disabled";
1046                 };
1047
1048                 i2c5: i2c@4807c000 {
1049                         compatible = "ti,omap4-i2c";
1050                         reg = <0x4807c000 0x100>;
1051                         interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
1052                         #address-cells = <1>;
1053                         #size-cells = <0>;
1054                         ti,hwmods = "i2c5";
1055                         status = "disabled";
1056                 };
1057
1058                 mmc1: mmc@4809c000 {
1059                         compatible = "ti,dra7-hsmmc", "ti,omap4-hsmmc";
1060                         reg = <0x4809c000 0x400>;
1061                         interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
1062                         ti,hwmods = "mmc1";
1063                         ti,dual-volt;
1064                         ti,needs-special-reset;
1065                         dmas = <&sdma_xbar 61>, <&sdma_xbar 62>;
1066                         dma-names = "tx", "rx";
1067                         status = "disabled";
1068                         pbias-supply = <&pbias_mmc_reg>;
1069                         max-frequency = <192000000>;
1070                         sd-uhs-sdr104;
1071                         sd-uhs-sdr50;
1072                         sd-uhs-ddr50;
1073                         sd-uhs-sdr25;
1074                         sd-uhs-sdr12;
1075                 };
1076
1077                 mmc2: mmc@480b4000 {
1078                         compatible = "ti,dra7-hsmmc", "ti,omap4-hsmmc";
1079                         reg = <0x480b4000 0x400>;
1080                         interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
1081                         ti,hwmods = "mmc2";
1082                         ti,needs-special-reset;
1083                         dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
1084                         dma-names = "tx", "rx";
1085                         status = "disabled";
1086                         max-frequency = <192000000>;
1087                         sd-uhs-sdr25;
1088                         sd-uhs-sdr12;
1089                         mmc-hs200-1_8v;
1090                         mmc-ddr-1_8v;
1091                 };
1092
1093                 mmc3: mmc@480ad000 {
1094                         compatible = "ti,dra7-hsmmc", "ti,omap4-hsmmc";
1095                         reg = <0x480ad000 0x400>;
1096                         interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
1097                         ti,hwmods = "mmc3";
1098                         ti,needs-special-reset;
1099                         dmas = <&sdma_xbar 77>, <&sdma_xbar 78>;
1100                         dma-names = "tx", "rx";
1101                         status = "disabled";
1102                         /* Errata i887 limits max-frequency of MMC3 to 64 MHz */
1103                         max-frequency = <64000000>;
1104                         sd-uhs-sdr12;
1105                         sd-uhs-sdr25;
1106                         sd-uhs-sdr50;
1107                 };
1108
1109                 mmc4: mmc@480d1000 {
1110                         compatible = "ti,dra7-hsmmc", "ti,omap4-hsmmc";
1111                         reg = <0x480d1000 0x400>;
1112                         interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
1113                         ti,hwmods = "mmc4";
1114                         ti,needs-special-reset;
1115                         dmas = <&sdma_xbar 57>, <&sdma_xbar 58>;
1116                         dma-names = "tx", "rx";
1117                         status = "disabled";
1118                         max-frequency = <192000000>;
1119                         sd-uhs-sdr12;
1120                         sd-uhs-sdr25;
1121                 };
1122
1123                 mmu0_dsp1: mmu@40d01000 {
1124                         compatible = "ti,dra7-dsp-iommu";
1125                         reg = <0x40d01000 0x100>;
1126                         interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
1127                         ti,hwmods = "mmu0_dsp1";
1128                         #iommu-cells = <0>;
1129                         ti,syscon-mmuconfig = <&dsp1_system 0x0>;
1130                         status = "disabled";
1131                 };
1132
1133                 mmu1_dsp1: mmu@40d02000 {
1134                         compatible = "ti,dra7-dsp-iommu";
1135                         reg = <0x40d02000 0x100>;
1136                         interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
1137                         ti,hwmods = "mmu1_dsp1";
1138                         #iommu-cells = <0>;
1139                         ti,syscon-mmuconfig = <&dsp1_system 0x1>;
1140                         status = "disabled";
1141                 };
1142
1143                 mmu_ipu1: mmu@58882000 {
1144                         compatible = "ti,dra7-iommu";
1145                         reg = <0x58882000 0x100>;
1146                         interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
1147                         ti,hwmods = "mmu_ipu1";
1148                         #iommu-cells = <0>;
1149                         ti,iommu-bus-err-back;
1150                         status = "disabled";
1151                 };
1152
1153                 mmu_ipu2: mmu@55082000 {
1154                         compatible = "ti,dra7-iommu";
1155                         reg = <0x55082000 0x100>;
1156                         interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
1157                         ti,hwmods = "mmu_ipu2";
1158                         #iommu-cells = <0>;
1159                         ti,iommu-bus-err-back;
1160                         status = "disabled";
1161                 };
1162
1163                 abb_mpu: regulator-abb-mpu {
1164                         compatible = "ti,abb-v3";
1165                         regulator-name = "abb_mpu";
1166                         #address-cells = <0>;
1167                         #size-cells = <0>;
1168                         clocks = <&sys_clkin1>;
1169                         ti,settling-time = <50>;
1170                         ti,clock-cycles = <16>;
1171
1172                         reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
1173                               <0x4ae06014 0x4>, <0x4a003b20 0xc>,
1174                               <0x4ae0c158 0x4>;
1175                         reg-names = "setup-address", "control-address",
1176                                     "int-address", "efuse-address",
1177                                     "ldo-address";
1178                         ti,tranxdone-status-mask = <0x80>;
1179                         /* LDOVBBMPU_FBB_MUX_CTRL */
1180                         ti,ldovbb-override-mask = <0x400>;
1181                         /* LDOVBBMPU_FBB_VSET_OUT */
1182                         ti,ldovbb-vset-mask = <0x1F>;
1183
1184                         /*
1185                          * NOTE: only FBB mode used but actual vset will
1186                          * determine final biasing
1187                          */
1188                         ti,abb_info = <
1189                         /*uV            ABB     efuse   rbb_m fbb_m     vset_m*/
1190                         1060000         0       0x0     0 0x02000000 0x01F00000
1191                         1160000         0       0x4     0 0x02000000 0x01F00000
1192                         1210000         0       0x8     0 0x02000000 0x01F00000
1193                         >;
1194                 };
1195
1196                 abb_ivahd: regulator-abb-ivahd {
1197                         compatible = "ti,abb-v3";
1198                         regulator-name = "abb_ivahd";
1199                         #address-cells = <0>;
1200                         #size-cells = <0>;
1201                         clocks = <&sys_clkin1>;
1202                         ti,settling-time = <50>;
1203                         ti,clock-cycles = <16>;
1204
1205                         reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
1206                               <0x4ae06010 0x4>, <0x4a0025cc 0xc>,
1207                               <0x4a002470 0x4>;
1208                         reg-names = "setup-address", "control-address",
1209                                     "int-address", "efuse-address",
1210                                     "ldo-address";
1211                         ti,tranxdone-status-mask = <0x40000000>;
1212                         /* LDOVBBIVA_FBB_MUX_CTRL */
1213                         ti,ldovbb-override-mask = <0x400>;
1214                         /* LDOVBBIVA_FBB_VSET_OUT */
1215                         ti,ldovbb-vset-mask = <0x1F>;
1216
1217                         /*
1218                          * NOTE: only FBB mode used but actual vset will
1219                          * determine final biasing
1220                          */
1221                         ti,abb_info = <
1222                         /*uV            ABB     efuse   rbb_m fbb_m     vset_m*/
1223                         1055000         0       0x0     0 0x02000000 0x01F00000
1224                         1150000         0       0x4     0 0x02000000 0x01F00000
1225                         1250000         0       0x8     0 0x02000000 0x01F00000
1226                         >;
1227                 };
1228
1229                 abb_dspeve: regulator-abb-dspeve {
1230                         compatible = "ti,abb-v3";
1231                         regulator-name = "abb_dspeve";
1232                         #address-cells = <0>;
1233                         #size-cells = <0>;
1234                         clocks = <&sys_clkin1>;
1235                         ti,settling-time = <50>;
1236                         ti,clock-cycles = <16>;
1237
1238                         reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
1239                               <0x4ae06010 0x4>, <0x4a0025e0 0xc>,
1240                               <0x4a00246c 0x4>;
1241                         reg-names = "setup-address", "control-address",
1242                                     "int-address", "efuse-address",
1243                                     "ldo-address";
1244                         ti,tranxdone-status-mask = <0x20000000>;
1245                         /* LDOVBBDSPEVE_FBB_MUX_CTRL */
1246                         ti,ldovbb-override-mask = <0x400>;
1247                         /* LDOVBBDSPEVE_FBB_VSET_OUT */
1248                         ti,ldovbb-vset-mask = <0x1F>;
1249
1250                         /*
1251                          * NOTE: only FBB mode used but actual vset will
1252                          * determine final biasing
1253                          */
1254                         ti,abb_info = <
1255                         /*uV            ABB     efuse   rbb_m fbb_m     vset_m*/
1256                         1055000         0       0x0     0 0x02000000 0x01F00000
1257                         1150000         0       0x4     0 0x02000000 0x01F00000
1258                         1250000         0       0x8     0 0x02000000 0x01F00000
1259                         >;
1260                 };
1261
1262                 abb_gpu: regulator-abb-gpu {
1263                         compatible = "ti,abb-v3";
1264                         regulator-name = "abb_gpu";
1265                         #address-cells = <0>;
1266                         #size-cells = <0>;
1267                         clocks = <&sys_clkin1>;
1268                         ti,settling-time = <50>;
1269                         ti,clock-cycles = <16>;
1270
1271                         reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
1272                               <0x4ae06010 0x4>, <0x4a003b08 0xc>,
1273                               <0x4ae0c154 0x4>;
1274                         reg-names = "setup-address", "control-address",
1275                                     "int-address", "efuse-address",
1276                                     "ldo-address";
1277                         ti,tranxdone-status-mask = <0x10000000>;
1278                         /* LDOVBBGPU_FBB_MUX_CTRL */
1279                         ti,ldovbb-override-mask = <0x400>;
1280                         /* LDOVBBGPU_FBB_VSET_OUT */
1281                         ti,ldovbb-vset-mask = <0x1F>;
1282
1283                         /*
1284                          * NOTE: only FBB mode used but actual vset will
1285                          * determine final biasing
1286                          */
1287                         ti,abb_info = <
1288                         /*uV            ABB     efuse   rbb_m fbb_m     vset_m*/
1289                         1090000         0       0x0     0 0x02000000 0x01F00000
1290                         1210000         0       0x4     0 0x02000000 0x01F00000
1291                         1280000         0       0x8     0 0x02000000 0x01F00000
1292                         >;
1293                 };
1294
1295                 mcspi1: spi@48098000 {
1296                         compatible = "ti,omap4-mcspi";
1297                         reg = <0x48098000 0x200>;
1298                         interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
1299                         #address-cells = <1>;
1300                         #size-cells = <0>;
1301                         ti,hwmods = "mcspi1";
1302                         ti,spi-num-cs = <4>;
1303                         dmas = <&sdma_xbar 35>,
1304                                <&sdma_xbar 36>,
1305                                <&sdma_xbar 37>,
1306                                <&sdma_xbar 38>,
1307                                <&sdma_xbar 39>,
1308                                <&sdma_xbar 40>,
1309                                <&sdma_xbar 41>,
1310                                <&sdma_xbar 42>;
1311                         dma-names = "tx0", "rx0", "tx1", "rx1",
1312                                     "tx2", "rx2", "tx3", "rx3";
1313                         status = "disabled";
1314                 };
1315
1316                 mcspi2: spi@4809a000 {
1317                         compatible = "ti,omap4-mcspi";
1318                         reg = <0x4809a000 0x200>;
1319                         interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
1320                         #address-cells = <1>;
1321                         #size-cells = <0>;
1322                         ti,hwmods = "mcspi2";
1323                         ti,spi-num-cs = <2>;
1324                         dmas = <&sdma_xbar 43>,
1325                                <&sdma_xbar 44>,
1326                                <&sdma_xbar 45>,
1327                                <&sdma_xbar 46>;
1328                         dma-names = "tx0", "rx0", "tx1", "rx1";
1329                         status = "disabled";
1330                 };
1331
1332                 mcspi3: spi@480b8000 {
1333                         compatible = "ti,omap4-mcspi";
1334                         reg = <0x480b8000 0x200>;
1335                         interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
1336                         #address-cells = <1>;
1337                         #size-cells = <0>;
1338                         ti,hwmods = "mcspi3";
1339                         ti,spi-num-cs = <2>;
1340                         dmas = <&sdma_xbar 15>, <&sdma_xbar 16>;
1341                         dma-names = "tx0", "rx0";
1342                         status = "disabled";
1343                 };
1344
1345                 mcspi4: spi@480ba000 {
1346                         compatible = "ti,omap4-mcspi";
1347                         reg = <0x480ba000 0x200>;
1348                         interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
1349                         #address-cells = <1>;
1350                         #size-cells = <0>;
1351                         ti,hwmods = "mcspi4";
1352                         ti,spi-num-cs = <1>;
1353                         dmas = <&sdma_xbar 70>, <&sdma_xbar 71>;
1354                         dma-names = "tx0", "rx0";
1355                         status = "disabled";
1356                 };
1357
1358                 qspi: qspi@4b300000 {
1359                         compatible = "ti,dra7xxx-qspi";
1360                         reg = <0x4b300000 0x100>,
1361                               <0x5c000000 0x4000000>;
1362                         reg-names = "qspi_base", "qspi_mmap";
1363                         syscon-chipselects = <&scm_conf 0x558>;
1364                         #address-cells = <1>;
1365                         #size-cells = <0>;
1366                         ti,hwmods = "qspi";
1367                         clocks = <&qspi_gfclk_div>;
1368                         clock-names = "fck";
1369                         num-cs = <4>;
1370                         interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
1371                         status = "disabled";
1372                 };
1373
1374                 /* OCP2SCP3 */
1375                 ocp2scp@4a090000 {
1376                         compatible = "ti,omap-ocp2scp";
1377                         #address-cells = <1>;
1378                         #size-cells = <1>;
1379                         ranges;
1380                         reg = <0x4a090000 0x20>;
1381                         ti,hwmods = "ocp2scp3";
1382                         sata_phy: phy@4A096000 {
1383                                 compatible = "ti,phy-pipe3-sata";
1384                                 reg = <0x4A096000 0x80>, /* phy_rx */
1385                                       <0x4A096400 0x64>, /* phy_tx */
1386                                       <0x4A096800 0x40>; /* pll_ctrl */
1387                                 reg-names = "phy_rx", "phy_tx", "pll_ctrl";
1388                                 syscon-phy-power = <&scm_conf 0x374>;
1389                                 clocks = <&sys_clkin1>, <&sata_ref_clk>;
1390                                 clock-names = "sysclk", "refclk";
1391                                 syscon-pllreset = <&scm_conf 0x3fc>;
1392                                 #phy-cells = <0>;
1393                         };
1394
1395                         pcie1_phy: pciephy@4a094000 {
1396                                 compatible = "ti,phy-pipe3-pcie";
1397                                 reg = <0x4a094000 0x80>, /* phy_rx */
1398                                       <0x4a094400 0x64>; /* phy_tx */
1399                                 reg-names = "phy_rx", "phy_tx";
1400                                 syscon-phy-power = <&scm_conf_pcie 0x1c>;
1401                                 syscon-pcs = <&scm_conf_pcie 0x10>;
1402                                 clocks = <&dpll_pcie_ref_ck>,
1403                                          <&dpll_pcie_ref_m2ldo_ck>,
1404                                          <&optfclk_pciephy1_32khz>,
1405                                          <&optfclk_pciephy1_clk>,
1406                                          <&optfclk_pciephy1_div_clk>,
1407                                          <&optfclk_pciephy_div>,
1408                                          <&sys_clkin1>;
1409                                 clock-names = "dpll_ref", "dpll_ref_m2",
1410                                               "wkupclk", "refclk",
1411                                               "div-clk", "phy-div", "sysclk";
1412                                 #phy-cells = <0>;
1413                         };
1414
1415                         pcie2_phy: pciephy@4a095000 {
1416                                 compatible = "ti,phy-pipe3-pcie";
1417                                 reg = <0x4a095000 0x80>, /* phy_rx */
1418                                       <0x4a095400 0x64>; /* phy_tx */
1419                                 reg-names = "phy_rx", "phy_tx";
1420                                 syscon-phy-power = <&scm_conf_pcie 0x20>;
1421                                 syscon-pcs = <&scm_conf_pcie 0x10>;
1422                                 clocks = <&dpll_pcie_ref_ck>,
1423                                          <&dpll_pcie_ref_m2ldo_ck>,
1424                                          <&optfclk_pciephy2_32khz>,
1425                                          <&optfclk_pciephy2_clk>,
1426                                          <&optfclk_pciephy2_div_clk>,
1427                                          <&optfclk_pciephy_div>,
1428                                          <&sys_clkin1>;
1429                                 clock-names = "dpll_ref", "dpll_ref_m2",
1430                                               "wkupclk", "refclk",
1431                                               "div-clk", "phy-div", "sysclk";
1432                                 #phy-cells = <0>;
1433                                 status = "disabled";
1434                         };
1435                 };
1436
1437                 sata: sata@4a141100 {
1438                         compatible = "snps,dwc-ahci";
1439                         reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
1440                         interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
1441                         phys = <&sata_phy>;
1442                         phy-names = "sata-phy";
1443                         clocks = <&sata_ref_clk>;
1444                         ti,hwmods = "sata";
1445                         ports-implemented = <0x1>;
1446                 };
1447
1448                 rtc: rtc@48838000 {
1449                         compatible = "ti,am3352-rtc";
1450                         reg = <0x48838000 0x100>;
1451                         interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
1452                                      <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
1453                         ti,hwmods = "rtcss";
1454                         clocks = <&sys_32k_ck>;
1455                 };
1456
1457                 /* OCP2SCP1 */
1458                 ocp2scp@4a080000 {
1459                         compatible = "ti,omap-ocp2scp";
1460                         #address-cells = <1>;
1461                         #size-cells = <1>;
1462                         ranges;
1463                         reg = <0x4a080000 0x20>;
1464                         ti,hwmods = "ocp2scp1";
1465
1466                         usb2_phy1: phy@4a084000 {
1467                                 compatible = "ti,dra7x-usb2", "ti,omap-usb2";
1468                                 reg = <0x4a084000 0x400>;
1469                                 syscon-phy-power = <&scm_conf 0x300>;
1470                                 clocks = <&usb_phy1_always_on_clk32k>,
1471                                          <&usb_otg_ss1_refclk960m>;
1472                                 clock-names =   "wkupclk",
1473                                                 "refclk";
1474                                 #phy-cells = <0>;
1475                         };
1476
1477                         usb2_phy2: phy@4a085000 {
1478                                 compatible = "ti,dra7x-usb2-phy2",
1479                                              "ti,omap-usb2";
1480                                 reg = <0x4a085000 0x400>;
1481                                 syscon-phy-power = <&scm_conf 0xe74>;
1482                                 clocks = <&usb_phy2_always_on_clk32k>,
1483                                          <&usb_otg_ss2_refclk960m>;
1484                                 clock-names =   "wkupclk",
1485                                                 "refclk";
1486                                 #phy-cells = <0>;
1487                         };
1488
1489                         usb3_phy1: phy@4a084400 {
1490                                 compatible = "ti,omap-usb3";
1491                                 reg = <0x4a084400 0x80>,
1492                                       <0x4a084800 0x64>,
1493                                       <0x4a084c00 0x40>;
1494                                 reg-names = "phy_rx", "phy_tx", "pll_ctrl";
1495                                 syscon-phy-power = <&scm_conf 0x370>;
1496                                 clocks = <&usb_phy3_always_on_clk32k>,
1497                                          <&sys_clkin1>,
1498                                          <&usb_otg_ss1_refclk960m>;
1499                                 clock-names =   "wkupclk",
1500                                                 "sysclk",
1501                                                 "refclk";
1502                                 #phy-cells = <0>;
1503                         };
1504                 };
1505
1506                 omap_dwc3_1: omap_dwc3_1@48880000 {
1507                         compatible = "ti,dwc3";
1508                         ti,hwmods = "usb_otg_ss1";
1509                         reg = <0x48880000 0x10000>;
1510                         interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
1511                         #address-cells = <1>;
1512                         #size-cells = <1>;
1513                         utmi-mode = <2>;
1514                         ranges;
1515                         usb1: usb@48890000 {
1516                                 compatible = "snps,dwc3";
1517                                 reg = <0x48890000 0x17000>;
1518                                 interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
1519                                              <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
1520                                              <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
1521                                 interrupt-names = "peripheral",
1522                                                   "host",
1523                                                   "otg";
1524                                 phys = <&usb2_phy1>, <&usb3_phy1>;
1525                                 phy-names = "usb2-phy", "usb3-phy";
1526                                 maximum-speed = "super-speed";
1527                                 dr_mode = "otg";
1528                                 snps,dis_u3_susphy_quirk;
1529                                 snps,dis_u2_susphy_quirk;
1530                         };
1531                 };
1532
1533                 omap_dwc3_2: omap_dwc3_2@488c0000 {
1534                         compatible = "ti,dwc3";
1535                         ti,hwmods = "usb_otg_ss2";
1536                         reg = <0x488c0000 0x10000>;
1537                         interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
1538                         #address-cells = <1>;
1539                         #size-cells = <1>;
1540                         utmi-mode = <2>;
1541                         ranges;
1542                         usb2: usb@488d0000 {
1543                                 compatible = "snps,dwc3";
1544                                 reg = <0x488d0000 0x17000>;
1545                                 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
1546                                              <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
1547                                              <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
1548                                 interrupt-names = "peripheral",
1549                                                   "host",
1550                                                   "otg";
1551                                 phys = <&usb2_phy2>;
1552                                 phy-names = "usb2-phy";
1553                                 maximum-speed = "high-speed";
1554                                 dr_mode = "otg";
1555                                 snps,dis_u3_susphy_quirk;
1556                                 snps,dis_u2_susphy_quirk;
1557                         };
1558                 };
1559
1560                 /* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
1561                 omap_dwc3_3: omap_dwc3_3@48900000 {
1562                         compatible = "ti,dwc3";
1563                         ti,hwmods = "usb_otg_ss3";
1564                         reg = <0x48900000 0x10000>;
1565                         interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
1566                         #address-cells = <1>;
1567                         #size-cells = <1>;
1568                         utmi-mode = <2>;
1569                         ranges;
1570                         status = "disabled";
1571                         usb3: usb@48910000 {
1572                                 compatible = "snps,dwc3";
1573                                 reg = <0x48910000 0x17000>;
1574                                 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
1575                                              <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
1576                                              <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
1577                                 interrupt-names = "peripheral",
1578                                                   "host",
1579                                                   "otg";
1580                                 maximum-speed = "high-speed";
1581                                 dr_mode = "otg";
1582                                 snps,dis_u3_susphy_quirk;
1583                                 snps,dis_u2_susphy_quirk;
1584                         };
1585                 };
1586
1587                 elm: elm@48078000 {
1588                         compatible = "ti,am3352-elm";
1589                         reg = <0x48078000 0xfc0>;      /* device IO registers */
1590                         interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
1591                         ti,hwmods = "elm";
1592                         status = "disabled";
1593                 };
1594
1595                 gpmc: gpmc@50000000 {
1596                         compatible = "ti,am3352-gpmc";
1597                         ti,hwmods = "gpmc";
1598                         reg = <0x50000000 0x37c>;      /* device IO registers */
1599                         interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
1600                         dmas = <&edma_xbar 4 0>;
1601                         dma-names = "rxtx";
1602                         gpmc,num-cs = <8>;
1603                         gpmc,num-waitpins = <2>;
1604                         #address-cells = <2>;
1605                         #size-cells = <1>;
1606                         interrupt-controller;
1607                         #interrupt-cells = <2>;
1608                         gpio-controller;
1609                         #gpio-cells = <2>;
1610                         status = "disabled";
1611                 };
1612
1613                 atl: atl@4843c000 {
1614                         compatible = "ti,dra7-atl";
1615                         reg = <0x4843c000 0x3ff>;
1616                         ti,hwmods = "atl";
1617                         ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
1618                                              <&atl_clkin2_ck>, <&atl_clkin3_ck>;
1619                         clocks = <&atl_gfclk_mux>;
1620                         clock-names = "fck";
1621                         status = "disabled";
1622                 };
1623
1624                 mcasp1: mcasp@48460000 {
1625                         compatible = "ti,dra7-mcasp-audio";
1626                         ti,hwmods = "mcasp1";
1627                         reg = <0x48460000 0x2000>,
1628                               <0x45800000 0x1000>;
1629                         reg-names = "mpu","dat";
1630                         interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
1631                                      <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
1632                         interrupt-names = "tx", "rx";
1633                         dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>;
1634                         dma-names = "tx", "rx";
1635                         clocks = <&mcasp1_aux_gfclk_mux>, <&mcasp1_ahclkx_mux>,
1636                                  <&mcasp1_ahclkr_mux>;
1637                         clock-names = "fck", "ahclkx", "ahclkr";
1638                         status = "disabled";
1639                 };
1640
1641                 mcasp2: mcasp@48464000 {
1642                         compatible = "ti,dra7-mcasp-audio";
1643                         ti,hwmods = "mcasp2";
1644                         reg = <0x48464000 0x2000>,
1645                               <0x45c00000 0x1000>;
1646                         reg-names = "mpu","dat";
1647                         interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
1648                                      <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
1649                         interrupt-names = "tx", "rx";
1650                         dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>;
1651                         dma-names = "tx", "rx";
1652                         clocks = <&mcasp2_aux_gfclk_mux>, <&mcasp2_ahclkx_mux>,
1653                                  <&mcasp2_ahclkr_mux>;
1654                         clock-names = "fck", "ahclkx", "ahclkr";
1655                         status = "disabled";
1656                 };
1657
1658                 mcasp3: mcasp@48468000 {
1659                         compatible = "ti,dra7-mcasp-audio";
1660                         ti,hwmods = "mcasp3";
1661                         reg = <0x48468000 0x2000>,
1662                               <0x46000000 0x1000>;
1663                         reg-names = "mpu","dat";
1664                         interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
1665                                      <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
1666                         interrupt-names = "tx", "rx";
1667                         dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>;
1668                         dma-names = "tx", "rx";
1669                         clocks = <&mcasp3_aux_gfclk_mux>, <&mcasp3_ahclkx_mux>;
1670                         clock-names = "fck", "ahclkx";
1671                         status = "disabled";
1672                 };
1673
1674                 mcasp4: mcasp@4846c000 {
1675                         compatible = "ti,dra7-mcasp-audio";
1676                         ti,hwmods = "mcasp4";
1677                         reg = <0x4846c000 0x2000>,
1678                               <0x48436000 0x1000>;
1679                         reg-names = "mpu","dat";
1680                         interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
1681                                      <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
1682                         interrupt-names = "tx", "rx";
1683                         dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>;
1684                         dma-names = "tx", "rx";
1685                         clocks = <&mcasp4_aux_gfclk_mux>, <&mcasp4_ahclkx_mux>;
1686                         clock-names = "fck", "ahclkx";
1687                         status = "disabled";
1688                 };
1689
1690                 mcasp5: mcasp@48470000 {
1691                         compatible = "ti,dra7-mcasp-audio";
1692                         ti,hwmods = "mcasp5";
1693                         reg = <0x48470000 0x2000>,
1694                               <0x4843a000 0x1000>;
1695                         reg-names = "mpu","dat";
1696                         interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
1697                                      <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
1698                         interrupt-names = "tx", "rx";
1699                         dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>;
1700                         dma-names = "tx", "rx";
1701                         clocks = <&mcasp5_aux_gfclk_mux>, <&mcasp5_ahclkx_mux>;
1702                         clock-names = "fck", "ahclkx";
1703                         status = "disabled";
1704                 };
1705
1706                 mcasp6: mcasp@48474000 {
1707                         compatible = "ti,dra7-mcasp-audio";
1708                         ti,hwmods = "mcasp6";
1709                         reg = <0x48474000 0x2000>,
1710                               <0x4844c000 0x1000>;
1711                         reg-names = "mpu","dat";
1712                         interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
1713                                      <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
1714                         interrupt-names = "tx", "rx";
1715                         dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>;
1716                         dma-names = "tx", "rx";
1717                         clocks = <&mcasp6_aux_gfclk_mux>, <&mcasp6_ahclkx_mux>;
1718                         clock-names = "fck", "ahclkx";
1719                         status = "disabled";
1720                 };
1721
1722                 mcasp7: mcasp@48478000 {
1723                         compatible = "ti,dra7-mcasp-audio";
1724                         ti,hwmods = "mcasp7";
1725                         reg = <0x48478000 0x2000>,
1726                               <0x48450000 0x1000>;
1727                         reg-names = "mpu","dat";
1728                         interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
1729                                      <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
1730                         interrupt-names = "tx", "rx";
1731                         dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>;
1732                         dma-names = "tx", "rx";
1733                         clocks = <&mcasp7_aux_gfclk_mux>, <&mcasp7_ahclkx_mux>;
1734                         clock-names = "fck", "ahclkx";
1735                         status = "disabled";
1736                 };
1737
1738                 mcasp8: mcasp@4847c000 {
1739                         compatible = "ti,dra7-mcasp-audio";
1740                         ti,hwmods = "mcasp8";
1741                         reg = <0x4847c000 0x2000>,
1742                               <0x48454000 0x1000>;
1743                         reg-names = "mpu","dat";
1744                         interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
1745                                      <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
1746                         interrupt-names = "tx", "rx";
1747                         dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>;
1748                         dma-names = "tx", "rx";
1749                         clocks = <&mcasp8_aux_gfclk_mux>, <&mcasp8_ahclkx_mux>;
1750                         clock-names = "fck", "ahclkx";
1751                         status = "disabled";
1752                 };
1753
1754                 crossbar_mpu: crossbar@4a002a48 {
1755                         compatible = "ti,irq-crossbar";
1756                         reg = <0x4a002a48 0x130>;
1757                         interrupt-controller;
1758                         interrupt-parent = <&wakeupgen>;
1759                         #interrupt-cells = <3>;
1760                         ti,max-irqs = <160>;
1761                         ti,max-crossbar-sources = <MAX_SOURCES>;
1762                         ti,reg-size = <2>;
1763                         ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
1764                         ti,irqs-skip = <10 133 139 140>;
1765                         ti,irqs-safe-map = <0>;
1766                 };
1767
1768                 mac: ethernet@48484000 {
1769                         compatible = "ti,dra7-cpsw","ti,cpsw";
1770                         ti,hwmods = "gmac";
1771                         clocks = <&gmac_main_clk>, <&gmac_rft_clk_mux>;
1772                         clock-names = "fck", "cpts";
1773                         cpdma_channels = <8>;
1774                         ale_entries = <1024>;
1775                         bd_ram_size = <0x2000>;
1776                         mac_control = <0x20>;
1777                         slaves = <2>;
1778                         active_slave = <0>;
1779                         cpts_clock_mult = <0x784CFE14>;
1780                         cpts_clock_shift = <29>;
1781                         reg = <0x48484000 0x1000
1782                                0x48485200 0x2E00>;
1783                         #address-cells = <1>;
1784                         #size-cells = <1>;
1785
1786                         /*
1787                          * Do not allow gating of cpsw clock as workaround
1788                          * for errata i877. Keeping internal clock disabled
1789                          * causes the device switching characteristics
1790                          * to degrade over time and eventually fail to meet
1791                          * the data manual delay time/skew specs.
1792                          */
1793                         ti,no-idle;
1794
1795                         /*
1796                          * rx_thresh_pend
1797                          * rx_pend
1798                          * tx_pend
1799                          * misc_pend
1800                          */
1801                         interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
1802                                      <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
1803                                      <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
1804                                      <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
1805                         ranges;
1806                         syscon = <&scm_conf>;
1807                         status = "disabled";
1808
1809                         davinci_mdio: mdio@48485000 {
1810                                 compatible = "ti,cpsw-mdio","ti,davinci_mdio";
1811                                 #address-cells = <1>;
1812                                 #size-cells = <0>;
1813                                 ti,hwmods = "davinci_mdio";
1814                                 bus_freq = <1000000>;
1815                                 reg = <0x48485000 0x100>;
1816                         };
1817
1818                         cpsw_emac0: slave@48480200 {
1819                                 /* Filled in by U-Boot */
1820                                 mac-address = [ 00 00 00 00 00 00 ];
1821                         };
1822
1823                         cpsw_emac1: slave@48480300 {
1824                                 /* Filled in by U-Boot */
1825                                 mac-address = [ 00 00 00 00 00 00 ];
1826                         };
1827
1828                         phy_sel: cpsw-phy-sel@4a002554 {
1829                                 compatible = "ti,dra7xx-cpsw-phy-sel";
1830                                 reg= <0x4a002554 0x4>;
1831                                 reg-names = "gmii-sel";
1832                         };
1833                 };
1834
1835                 dcan1: can@481cc000 {
1836                         compatible = "ti,dra7-d_can";
1837                         ti,hwmods = "dcan1";
1838                         reg = <0x4ae3c000 0x2000>;
1839                         syscon-raminit = <&scm_conf 0x558 0>;
1840                         interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
1841                         clocks = <&dcan1_sys_clk_mux>;
1842                         status = "disabled";
1843                 };
1844
1845                 dcan2: can@481d0000 {
1846                         compatible = "ti,dra7-d_can";
1847                         ti,hwmods = "dcan2";
1848                         reg = <0x48480000 0x2000>;
1849                         syscon-raminit = <&scm_conf 0x558 1>;
1850                         interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
1851                         clocks = <&sys_clkin1>;
1852                         status = "disabled";
1853                 };
1854
1855                 dss: dss@58000000 {
1856                         compatible = "ti,dra7-dss";
1857                         /* 'reg' defined in dra72x.dtsi and dra74x.dtsi */
1858                         /* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */
1859                         status = "disabled";
1860                         ti,hwmods = "dss_core";
1861                         /* CTRL_CORE_DSS_PLL_CONTROL */
1862                         syscon-pll-ctrl = <&scm_conf 0x538>;
1863                         #address-cells = <1>;
1864                         #size-cells = <1>;
1865                         ranges;
1866
1867                         dispc@58001000 {
1868                                 compatible = "ti,dra7-dispc";
1869                                 reg = <0x58001000 0x1000>;
1870                                 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
1871                                 ti,hwmods = "dss_dispc";
1872                                 clocks = <&dss_dss_clk>;
1873                                 clock-names = "fck";
1874                                 /* CTRL_CORE_SMA_SW_1 */
1875                                 syscon-pol = <&scm_conf 0x534>;
1876                         };
1877
1878                         hdmi: encoder@58060000 {
1879                                 compatible = "ti,dra7-hdmi";
1880                                 reg = <0x58040000 0x200>,
1881                                       <0x58040200 0x80>,
1882                                       <0x58040300 0x80>,
1883                                       <0x58060000 0x19000>;
1884                                 reg-names = "wp", "pll", "phy", "core";
1885                                 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
1886                                 status = "disabled";
1887                                 ti,hwmods = "dss_hdmi";
1888                                 clocks = <&dss_48mhz_clk>, <&dss_hdmi_clk>;
1889                                 clock-names = "fck", "sys_clk";
1890                         };
1891                 };
1892
1893                 epwmss0: epwmss@4843e000 {
1894                         compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
1895                         reg = <0x4843e000 0x30>;
1896                         ti,hwmods = "epwmss0";
1897                         #address-cells = <1>;
1898                         #size-cells = <1>;
1899                         status = "disabled";
1900                         ranges;
1901
1902                         ehrpwm0: pwm@4843e200 {
1903                                 compatible = "ti,dra746-ehrpwm",
1904                                              "ti,am3352-ehrpwm";
1905                                 #pwm-cells = <3>;
1906                                 reg = <0x4843e200 0x80>;
1907                                 clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>;
1908                                 clock-names = "tbclk", "fck";
1909                                 status = "disabled";
1910                         };
1911
1912                         ecap0: ecap@4843e100 {
1913                                 compatible = "ti,dra746-ecap",
1914                                              "ti,am3352-ecap";
1915                                 #pwm-cells = <3>;
1916                                 reg = <0x4843e100 0x80>;
1917                                 clocks = <&l4_root_clk_div>;
1918                                 clock-names = "fck";
1919                                 status = "disabled";
1920                         };
1921                 };
1922
1923                 epwmss1: epwmss@48440000 {
1924                         compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
1925                         reg = <0x48440000 0x30>;
1926                         ti,hwmods = "epwmss1";
1927                         #address-cells = <1>;
1928                         #size-cells = <1>;
1929                         status = "disabled";
1930                         ranges;
1931
1932                         ehrpwm1: pwm@48440200 {
1933                                 compatible = "ti,dra746-ehrpwm",
1934                                              "ti,am3352-ehrpwm";
1935                                 #pwm-cells = <3>;
1936                                 reg = <0x48440200 0x80>;
1937                                 clocks = <&ehrpwm1_tbclk>, <&l4_root_clk_div>;
1938                                 clock-names = "tbclk", "fck";
1939                                 status = "disabled";
1940                         };
1941
1942                         ecap1: ecap@48440100 {
1943                                 compatible = "ti,dra746-ecap",
1944                                              "ti,am3352-ecap";
1945                                 #pwm-cells = <3>;
1946                                 reg = <0x48440100 0x80>;
1947                                 clocks = <&l4_root_clk_div>;
1948                                 clock-names = "fck";
1949                                 status = "disabled";
1950                         };
1951                 };
1952
1953                 epwmss2: epwmss@48442000 {
1954                         compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
1955                         reg = <0x48442000 0x30>;
1956                         ti,hwmods = "epwmss2";
1957                         #address-cells = <1>;
1958                         #size-cells = <1>;
1959                         status = "disabled";
1960                         ranges;
1961
1962                         ehrpwm2: pwm@48442200 {
1963                                 compatible = "ti,dra746-ehrpwm",
1964                                              "ti,am3352-ehrpwm";
1965                                 #pwm-cells = <3>;
1966                                 reg = <0x48442200 0x80>;
1967                                 clocks = <&ehrpwm2_tbclk>, <&l4_root_clk_div>;
1968                                 clock-names = "tbclk", "fck";
1969                                 status = "disabled";
1970                         };
1971
1972                         ecap2: ecap@48442100 {
1973                                 compatible = "ti,dra746-ecap",
1974                                              "ti,am3352-ecap";
1975                                 #pwm-cells = <3>;
1976                                 reg = <0x48442100 0x80>;
1977                                 clocks = <&l4_root_clk_div>;
1978                                 clock-names = "fck";
1979                                 status = "disabled";
1980                         };
1981                 };
1982
1983                 aes1: aes@4b500000 {
1984                         compatible = "ti,omap4-aes";
1985                         ti,hwmods = "aes1";
1986                         reg = <0x4b500000 0xa0>;
1987                         interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
1988                         dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
1989                         dma-names = "tx", "rx";
1990                         clocks = <&l3_iclk_div>;
1991                         clock-names = "fck";
1992                 };
1993
1994                 aes2: aes@4b700000 {
1995                         compatible = "ti,omap4-aes";
1996                         ti,hwmods = "aes2";
1997                         reg = <0x4b700000 0xa0>;
1998                         interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
1999                         dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
2000                         dma-names = "tx", "rx";
2001                         clocks = <&l3_iclk_div>;
2002                         clock-names = "fck";
2003                 };
2004
2005                 des: des@480a5000 {
2006                         compatible = "ti,omap4-des";
2007                         ti,hwmods = "des";
2008                         reg = <0x480a5000 0xa0>;
2009                         interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
2010                         dmas = <&sdma_xbar 117>, <&sdma_xbar 116>;
2011                         dma-names = "tx", "rx";
2012                         clocks = <&l3_iclk_div>;
2013                         clock-names = "fck";
2014                 };
2015
2016                 sham: sham@53100000 {
2017                         compatible = "ti,omap5-sham";
2018                         ti,hwmods = "sham";
2019                         reg = <0x4b101000 0x300>;
2020                         interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
2021                         dmas = <&edma_xbar 119 0>;
2022                         dma-names = "rx";
2023                         clocks = <&l3_iclk_div>;
2024                         clock-names = "fck";
2025                 };
2026
2027                 rng: rng@48090000 {
2028                         compatible = "ti,omap4-rng";
2029                         ti,hwmods = "rng";
2030                         reg = <0x48090000 0x2000>;
2031                         interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
2032                         clocks = <&l3_iclk_div>;
2033                         clock-names = "fck";
2034                 };
2035         };
2036
2037         thermal_zones: thermal-zones {
2038                 #include "omap4-cpu-thermal.dtsi"
2039                 #include "omap5-gpu-thermal.dtsi"
2040                 #include "omap5-core-thermal.dtsi"
2041                 #include "dra7-dspeve-thermal.dtsi"
2042                 #include "dra7-iva-thermal.dtsi"
2043         };
2044
2045 };
2046
2047 &cpu_thermal {
2048         polling-delay = <500>; /* milliseconds */
2049         coefficients = <0 2000>;
2050 };
2051
2052 &gpu_thermal {
2053         coefficients = <0 2000>;
2054 };
2055
2056 &core_thermal {
2057         coefficients = <0 2000>;
2058 };
2059
2060 &dspeve_thermal {
2061         coefficients = <0 2000>;
2062 };
2063
2064 &iva_thermal {
2065         coefficients = <0 2000>;
2066 };
2067
2068 &cpu_crit {
2069         temperature = <120000>; /* milli Celsius */
2070 };
2071
2072 /include/ "dra7xx-clocks.dtsi"