git.sur5r.net Git - u-boot/blob - arch/arm/dts/dra72-evm.dts

   1 /*
   2  * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8 /dts-v1/;
   9
  10 #include "dra72x.dtsi"
  11 #include <dt-bindings/gpio/gpio.h>
  12
  13 / {
  14         model = "TI DRA722";
  15         compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7";
  16
  17         chosen {
  18                 stdout-path = &uart1;
  19                 tick-timer = &timer2;
  20         };
  21
  22         memory {
  23                 device_type = "memory";
  24                 reg = <0x80000000 0x40000000>; /* 1024 MB */
  25         };
  26
  27         aliases {
  28                 display0 = &hdmi0;
  29         };
  30
  31         evm_3v3: fixedregulator-evm_3v3 {
  32                 compatible = "regulator-fixed";
  33                 regulator-name = "evm_3v3";
  34                 regulator-min-microvolt = <3300000>;
  35                 regulator-max-microvolt = <3300000>;
  36         };
  37
  38         extcon_usb1: extcon_usb1 {
  39                 compatible = "linux,extcon-usb-gpio";
  40                 id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
  41         };
  42
  43         extcon_usb2: extcon_usb2 {
  44                 compatible = "linux,extcon-usb-gpio";
  45                 id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
  46         };
  47
  48         hdmi0: connector {
  49                 compatible = "hdmi-connector";
  50                 label = "hdmi";
  51
  52                 type = "a";
  53
  54                 port {
  55                         hdmi_connector_in: endpoint {
  56                                 remote-endpoint = <&tpd12s015_out>;
  57                         };
  58                 };
  59         };
  60
  61         tpd12s015: encoder {
  62                 compatible = "ti,tpd12s015";
  63
  64                 pinctrl-names = "default";
  65                 pinctrl-0 = <&tpd12s015_pins>;
  66
  67                 gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>, /* P4, CT CP HPD */
  68                         <&pcf_hdmi 5 GPIO_ACTIVE_HIGH>, /* P5, LS OE */
  69                         <&gpio7 12 GPIO_ACTIVE_HIGH>;   /* gpio7_12/sp1_cs2, HPD */
  70
  71                 ports {
  72                         #address-cells = <1>;
  73                         #size-cells = <0>;
  74
  75                         port@0 {
  76                                 reg = <0>;
  77
  78                                 tpd12s015_in: endpoint {
  79                                         remote-endpoint = <&hdmi_out>;
  80                                 };
  81                         };
  82
  83                         port@1 {
  84                                 reg = <1>;
  85
  86                                 tpd12s015_out: endpoint {
  87                                         remote-endpoint = <&hdmi_connector_in>;
  88                                 };
  89                         };
  90                 };
  91         };
  92 };
  93
  94 &dra7_pmx_core {
  95         i2c1_pins: pinmux_i2c1_pins {
  96                 pinctrl-single,pins = <
  97                         0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
  98                         0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
  99                 >;
 100         };
 101
 102         i2c5_pins: pinmux_i2c5_pins {
 103                 pinctrl-single,pins = <
 104                         0x2b4 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
 105                         0x2b8 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
 106                 >;
 107         };
 108
 109         nand_default: nand_default {
 110                 pinctrl-single,pins = <
 111                         0x0     (PIN_INPUT  | MUX_MODE0) /* gpmc_ad0 */
 112                         0x4     (PIN_INPUT  | MUX_MODE0) /* gpmc_ad1 */
 113                         0x8     (PIN_INPUT  | MUX_MODE0) /* gpmc_ad2 */
 114                         0xc     (PIN_INPUT  | MUX_MODE0) /* gpmc_ad3 */
 115                         0x10    (PIN_INPUT  | MUX_MODE0) /* gpmc_ad4 */
 116                         0x14    (PIN_INPUT  | MUX_MODE0) /* gpmc_ad5 */
 117                         0x18    (PIN_INPUT  | MUX_MODE0) /* gpmc_ad6 */
 118                         0x1c    (PIN_INPUT  | MUX_MODE0) /* gpmc_ad7 */
 119                         0x20    (PIN_INPUT  | MUX_MODE0) /* gpmc_ad8 */
 120                         0x24    (PIN_INPUT  | MUX_MODE0) /* gpmc_ad9 */
 121                         0x28    (PIN_INPUT  | MUX_MODE0) /* gpmc_ad10 */
 122                         0x2c    (PIN_INPUT  | MUX_MODE0) /* gpmc_ad11 */
 123                         0x30    (PIN_INPUT  | MUX_MODE0) /* gpmc_ad12 */
 124                         0x34    (PIN_INPUT  | MUX_MODE0) /* gpmc_ad13 */
 125                         0x38    (PIN_INPUT  | MUX_MODE0) /* gpmc_ad14 */
 126                         0x3c    (PIN_INPUT  | MUX_MODE0) /* gpmc_ad15 */
 127                         0xb4    (PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */
 128                         0xc4    (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
 129                         0xcc    (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
 130                         0xc8    (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
 131                         0xd0    (PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */
 132                         0xd8    (PIN_INPUT  | MUX_MODE0) /* gpmc_wait0 */
 133                 >;
 134         };
 135
 136         usb1_pins: pinmux_usb1_pins {
 137                 pinctrl-single,pins = <
 138                         0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
 139                 >;
 140         };
 141
 142         usb2_pins: pinmux_usb2_pins {
 143                 pinctrl-single,pins = <
 144                         0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
 145                 >;
 146         };
 147
 148         tps65917_pins_default: tps65917_pins_default {
 149                 pinctrl-single,pins = <
 150                         0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
 151                 >;
 152         };
 153
 154         mmc1_pins_default: mmc1_pins_default {
 155                 pinctrl-single,pins = <
 156                         0x36c (PIN_INPUT | MUX_MODE14)  /* mmc1sdcd.gpio219 */
 157                         0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
 158                         0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
 159                         0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
 160                         0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
 161                         0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
 162                         0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
 163                 >;
 164         };
 165
 166         mmc2_pins_default: mmc2_pins_default {
 167                 pinctrl-single,pins = <
 168                         0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
 169                         0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
 170                         0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
 171                         0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
 172                         0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
 173                         0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
 174                         0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
 175                         0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
 176                         0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
 177                         0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
 178                 >;
 179         };
 180
 181         dcan1_pins_default: dcan1_pins_default {
 182                 pinctrl-single,pins = <
 183                         0x3d0   (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
 184                         0x418   (PULL_UP | MUX_MODE1)   /* wakeup0.dcan1_rx */
 185                 >;
 186         };
 187
 188         dcan1_pins_sleep: dcan1_pins_sleep {
 189                 pinctrl-single,pins = <
 190                         0x3d0   (MUX_MODE15 | PULL_UP)  /* dcan1_tx.off */
 191                         0x418   (MUX_MODE15 | PULL_UP)  /* wakeup0.off */
 192                 >;
 193         };
 194
 195         qspi1_pins: pinmux_qspi1_pins {
 196                 pinctrl-single,pins = <
 197                         0x74 (PIN_OUTPUT | MUX_MODE1)   /* gpmc_a13.qspi1_rtclk */
 198                         0x78 (PIN_INPUT | MUX_MODE1)    /* gpmc_a14.qspi1_d3 */
 199                         0x7c (PIN_INPUT | MUX_MODE1)    /* gpmc_a15.qspi1_d2 */
 200                         0x80 (PIN_INPUT | MUX_MODE1)    /* gpmc_a16.qspi1_d1 */
 201                         0x84 (PIN_INPUT | MUX_MODE1)    /* gpmc_a17.qspi1_d0 */
 202                         0x88 (PIN_OUTPUT | MUX_MODE1)   /* qpmc_a18.qspi1_sclk */
 203                         0xb8 (PIN_OUTPUT | MUX_MODE1)   /* gpmc_cs2.qspi1_cs0 */
 204                 >;
 205         };
 206
 207         hdmi_pins: pinmux_hdmi_pins {
 208                 pinctrl-single,pins = <
 209                         0x408 (PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
 210                         0x40c (PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
 211                 >;
 212         };
 213
 214         tpd12s015_pins: pinmux_tpd12s015_pins {
 215                 pinctrl-single,pins = <
 216                         0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
 217                 >;
 218         };
 219 };
 220
 221 &i2c1 {
 222         status = "okay";
 223         pinctrl-names = "default";
 224         pinctrl-0 = <&i2c1_pins>;
 225         clock-frequency = <400000>;
 226
 227         tps65917: tps65917@58 {
 228                 compatible = "ti,tps65917";
 229                 reg = <0x58>;
 230
 231                 pinctrl-names = "default";
 232                 pinctrl-0 = <&tps65917_pins_default>;
 233
 234                 interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>;  /* IRQ_SYS_1N */
 235                 interrupt-controller;
 236                 #interrupt-cells = <2>;
 237
 238                 ti,system-power-controller;
 239
 240                 tps65917_pmic {
 241                         compatible = "ti,tps65917-pmic";
 242
 243                         regulators {
 244                                 smps1_reg: smps1 {
 245                                         /* VDD_MPU */
 246                                         regulator-name = "smps1";
 247                                         regulator-min-microvolt = <850000>;
 248                                         regulator-max-microvolt = <1250000>;
 249                                         regulator-always-on;
 250                                         regulator-boot-on;
 251                                 };
 252
 253                                 smps2_reg: smps2 {
 254                                         /* VDD_CORE */
 255                                         regulator-name = "smps2";
 256                                         regulator-min-microvolt = <850000>;
 257                                         regulator-max-microvolt = <1060000>;
 258                                         regulator-boot-on;
 259                                         regulator-always-on;
 260                                 };
 261
 262                                 smps3_reg: smps3 {
 263                                         /* VDD_GPU IVA DSPEVE */
 264                                         regulator-name = "smps3";
 265                                         regulator-min-microvolt = <850000>;
 266                                         regulator-max-microvolt = <1250000>;
 267                                         regulator-boot-on;
 268                                         regulator-always-on;
 269                                 };
 270
 271                                 smps4_reg: smps4 {
 272                                         /* VDDS1V8 */
 273                                         regulator-name = "smps4";
 274                                         regulator-min-microvolt = <1800000>;
 275                                         regulator-max-microvolt = <1800000>;
 276                                         regulator-always-on;
 277                                         regulator-boot-on;
 278                                 };
 279
 280                                 smps5_reg: smps5 {
 281                                         /* VDD_DDR */
 282                                         regulator-name = "smps5";
 283                                         regulator-min-microvolt = <1350000>;
 284                                         regulator-max-microvolt = <1350000>;
 285                                         regulator-boot-on;
 286                                         regulator-always-on;
 287                                 };
 288
 289                                 ldo1_reg: ldo1 {
 290                                         /* LDO1_OUT --> SDIO  */
 291                                         regulator-name = "ldo1";
 292                                         regulator-min-microvolt = <1800000>;
 293                                         regulator-max-microvolt = <3300000>;
 294                                         regulator-boot-on;
 295                                 };
 296
 297                                 ldo2_reg: ldo2 {
 298                                         /* LDO2_OUT --> TP1017 (UNUSED)  */
 299                                         regulator-name = "ldo2";
 300                                         regulator-min-microvolt = <1800000>;
 301                                         regulator-max-microvolt = <3300000>;
 302                                 };
 303
 304                                 ldo3_reg: ldo3 {
 305                                         /* VDDA_1V8_PHY */
 306                                         regulator-name = "ldo3";
 307                                         regulator-min-microvolt = <1800000>;
 308                                         regulator-max-microvolt = <1800000>;
 309                                         regulator-boot-on;
 310                                         regulator-always-on;
 311                                 };
 312
 313                                 ldo5_reg: ldo5 {
 314                                         /* VDDA_1V8_PLL */
 315                                         regulator-name = "ldo5";
 316                                         regulator-min-microvolt = <1800000>;
 317                                         regulator-max-microvolt = <1800000>;
 318                                         regulator-always-on;
 319                                         regulator-boot-on;
 320                                 };
 321
 322                                 ldo4_reg: ldo4 {
 323                                         /* VDDA_3V_USB: VDDA_USBHS33 */
 324                                         regulator-name = "ldo4";
 325                                         regulator-min-microvolt = <3300000>;
 326                                         regulator-max-microvolt = <3300000>;
 327                                         regulator-boot-on;
 328                                 };
 329                         };
 330                 };
 331
 332                 tps65917_power_button {
 333                         compatible = "ti,palmas-pwrbutton";
 334                         interrupt-parent = <&tps65917>;
 335                         interrupts = <1 IRQ_TYPE_NONE>;
 336                         wakeup-source;
 337                         ti,palmas-long-press-seconds = <6>;
 338                 };
 339         };
 340
 341         pcf_gpio_21: gpio@21 {
 342                 compatible = "ti,pcf8575";
 343                 reg = <0x21>;
 344                 lines-initial-states = <0x1408>;
 345                 gpio-controller;
 346                 #gpio-cells = <2>;
 347                 interrupt-parent = <&gpio6>;
 348                 interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
 349                 interrupt-controller;
 350                 #interrupt-cells = <2>;
 351                 u-boot,i2c-offset-len = <0>;
 352         };
 353 };
 354
 355 &i2c5 {
 356         status = "okay";
 357         pinctrl-names = "default";
 358         pinctrl-0 = <&i2c5_pins>;
 359         clock-frequency = <400000>;
 360
 361         pcf_hdmi: pcf8575@26 {
 362                 compatible = "nxp,pcf8575";
 363                 reg = <0x26>;
 364                 gpio-controller;
 365                 #gpio-cells = <2>;
 366                 /*
 367                  * initial state is used here to keep the mdio interface
 368                  * selected on RU89 through SEL_VIN4_MUX_S0, VIN2_S1 and
 369                  * VIN2_S0 driven high otherwise Ethernet stops working
 370                  * VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6
 371                  */
 372                 lines-initial-states = <0x0f2b>;
 373                 u-boot,i2c-offset-len = <0>;
 374         };
 375 };
 376
 377 &uart1 {
 378         status = "okay";
 379 };
 380
 381 &elm {
 382         status = "okay";
 383 };
 384
 385 &gpmc {
 386         status = "okay";
 387         pinctrl-names = "default";
 388         pinctrl-0 = <&nand_default>;
 389         ranges = <0 0 0 0x01000000>;    /* minimum GPMC partition = 16MB */
 390         nand@0,0 {
 391                 /* To use NAND, DIP switch SW5 must be set like so:
 392                  * SW5.1 (NAND_SELn) = ON (LOW)
 393                  * SW5.9 (GPMC_WPN) = OFF (HIGH)
 394                  */
 395                 reg = <0 0 4>;          /* device IO registers */
 396                 ti,nand-ecc-opt = "bch8";
 397                 ti,elm-id = <&elm>;
 398                 nand-bus-width = <16>;
 399                 gpmc,device-width = <2>;
 400                 gpmc,sync-clk-ps = <0>;
 401                 gpmc,cs-on-ns = <0>;
 402                 gpmc,cs-rd-off-ns = <80>;
 403                 gpmc,cs-wr-off-ns = <80>;
 404                 gpmc,adv-on-ns = <0>;
 405                 gpmc,adv-rd-off-ns = <60>;
 406                 gpmc,adv-wr-off-ns = <60>;
 407                 gpmc,we-on-ns = <10>;
 408                 gpmc,we-off-ns = <50>;
 409                 gpmc,oe-on-ns = <4>;
 410                 gpmc,oe-off-ns = <40>;
 411                 gpmc,access-ns = <40>;
 412                 gpmc,wr-access-ns = <80>;
 413                 gpmc,rd-cycle-ns = <80>;
 414                 gpmc,wr-cycle-ns = <80>;
 415                 gpmc,bus-turnaround-ns = <0>;
 416                 gpmc,cycle2cycle-delay-ns = <0>;
 417                 gpmc,clk-activation-ns = <0>;
 418                 gpmc,wait-monitoring-ns = <0>;
 419                 gpmc,wr-data-mux-bus-ns = <0>;
 420                 /* MTD partition table */
 421                 /* All SPL-* partitions are sized to minimal length
 422                  * which can be independently programmable. For
 423                  * NAND flash this is equal to size of erase-block */
 424                 #address-cells = <1>;
 425                 #size-cells = <1>;
 426                 partition@0 {
 427                         label = "NAND.SPL";
 428                         reg = <0x00000000 0x000020000>;
 429                 };
 430                 partition@1 {
 431                         label = "NAND.SPL.backup1";
 432                         reg = <0x00020000 0x00020000>;
 433                 };
 434                 partition@2 {
 435                         label = "NAND.SPL.backup2";
 436                         reg = <0x00040000 0x00020000>;
 437                 };
 438                 partition@3 {
 439                         label = "NAND.SPL.backup3";
 440                         reg = <0x00060000 0x00020000>;
 441                 };
 442                 partition@4 {
 443                         label = "NAND.u-boot-spl-os";
 444                         reg = <0x00080000 0x00040000>;
 445                 };
 446                 partition@5 {
 447                         label = "NAND.u-boot";
 448                         reg = <0x000c0000 0x00100000>;
 449                 };
 450                 partition@6 {
 451                         label = "NAND.u-boot-env";
 452                         reg = <0x001c0000 0x00020000>;
 453                 };
 454                 partition@7 {
 455                         label = "NAND.u-boot-env.backup1";
 456                         reg = <0x001e0000 0x00020000>;
 457                 };
 458                 partition@8 {
 459                         label = "NAND.kernel";
 460                         reg = <0x00200000 0x00800000>;
 461                 };
 462                 partition@9 {
 463                         label = "NAND.file-system";
 464                         reg = <0x00a00000 0x0f600000>;
 465                 };
 466         };
 467 };
 468
 469 &usb2_phy1 {
 470         phy-supply = <&ldo4_reg>;
 471 };
 472
 473 &usb2_phy2 {
 474         phy-supply = <&ldo4_reg>;
 475 };
 476
 477 &omap_dwc3_1 {
 478         extcon = <&extcon_usb1>;
 479 };
 480
 481 &omap_dwc3_2 {
 482         extcon = <&extcon_usb2>;
 483 };
 484
 485 &usb1 {
 486         dr_mode = "peripheral";
 487         pinctrl-names = "default";
 488         pinctrl-0 = <&usb1_pins>;
 489 };
 490
 491 &usb2 {
 492         dr_mode = "host";
 493         pinctrl-names = "default";
 494         pinctrl-0 = <&usb2_pins>;
 495 };
 496
 497 &mmc1 {
 498         status = "okay";
 499         pinctrl-names = "default";
 500         pinctrl-0 = <&mmc1_pins_default>;
 501
 502         vmmc-supply = <&ldo1_reg>;
 503         bus-width = <4>;
 504         /*
 505          * SDCD signal is not being used here - using the fact that GPIO mode
 506          * is a viable alternative
 507          */
 508         cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
 509 };
 510
 511 &mmc2 {
 512         /* SW5-3 in ON position */
 513         status = "okay";
 514         pinctrl-names = "default";
 515         pinctrl-0 = <&mmc2_pins_default>;
 516
 517         vmmc-supply = <&evm_3v3>;
 518         bus-width = <8>;
 519         ti,non-removable;
 520 };
 521
 522 &dra7_pmx_core {
 523         cpsw_default: cpsw_default {
 524                 pinctrl-single,pins = <
 525                         /* Slave 2 */
 526                         0x198 (PIN_OUTPUT | MUX_MODE3)  /* vin2a_d12.rgmii1_txc */
 527                         0x19c (PIN_OUTPUT | MUX_MODE3)  /* vin2a_d13.rgmii1_tctl */
 528                         0x1a0 (PIN_OUTPUT | MUX_MODE3)  /* vin2a_d14.rgmii1_td3 */
 529                         0x1a4 (PIN_OUTPUT | MUX_MODE3)  /* vin2a_d15.rgmii1_td2 */
 530                         0x1a8 (PIN_OUTPUT | MUX_MODE3)  /* vin2a_d16.rgmii1_td1 */
 531                         0x1ac (PIN_OUTPUT | MUX_MODE3)  /* vin2a_d17.rgmii1_td0 */
 532                         0x1b0 (PIN_INPUT | MUX_MODE3)   /* vin2a_d18.rgmii1_rclk */
 533                         0x1b4 (PIN_INPUT | MUX_MODE3)   /* vin2a_d19.rgmii1_rctl */
 534                         0x1b8 (PIN_INPUT | MUX_MODE3)   /* vin2a_d20.rgmii1_rd3 */
 535                         0x1bc (PIN_INPUT | MUX_MODE3)   /* vin2a_d21.rgmii1_rd2 */
 536                         0x1c0 (PIN_INPUT | MUX_MODE3)   /* vin2a_d22.rgmii1_rd1 */
 537                         0x1c4 (PIN_INPUT | MUX_MODE3)   /* vin2a_d23.rgmii1_rd0 */
 538                 >;
 539
 540         };
 541
 542         cpsw_sleep: cpsw_sleep {
 543                 pinctrl-single,pins = <
 544                         /* Slave 2 */
 545                         0x198 (MUX_MODE15)
 546                         0x19c (MUX_MODE15)
 547                         0x1a0 (MUX_MODE15)
 548                         0x1a4 (MUX_MODE15)
 549                         0x1a8 (MUX_MODE15)
 550                         0x1ac (MUX_MODE15)
 551                         0x1b0 (MUX_MODE15)
 552                         0x1b4 (MUX_MODE15)
 553                         0x1b8 (MUX_MODE15)
 554                         0x1bc (MUX_MODE15)
 555                         0x1c0 (MUX_MODE15)
 556                         0x1c4 (MUX_MODE15)
 557                 >;
 558         };
 559
 560         davinci_mdio_default: davinci_mdio_default {
 561                 pinctrl-single,pins = <
 562                         /* MDIO */
 563                         0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0)   /* mdio_d.mdio_d */
 564                         0x240 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mdio_clk.mdio_clk */
 565                 >;
 566         };
 567
 568         davinci_mdio_sleep: davinci_mdio_sleep {
 569                 pinctrl-single,pins = <
 570                         0x23c (MUX_MODE15)
 571                         0x240 (MUX_MODE15)
 572                 >;
 573         };
 574 };
 575
 576 &mac {
 577         status = "okay";
 578         pinctrl-names = "default", "sleep";
 579         pinctrl-0 = <&cpsw_default>;
 580         pinctrl-1 = <&cpsw_sleep>;
 581         mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_HIGH>;
 582 };
 583
 584 &cpsw_emac1 {
 585         phy_id = <&davinci_mdio>, <3>;
 586         phy-mode = "rgmii";
 587 };
 588
 589 &davinci_mdio {
 590         pinctrl-names = "default", "sleep";
 591         pinctrl-0 = <&davinci_mdio_default>;
 592         pinctrl-1 = <&davinci_mdio_sleep>;
 593 };
 594
 595 &dcan1 {
 596         status = "ok";
 597         pinctrl-names = "default", "sleep", "active";
 598         pinctrl-0 = <&dcan1_pins_sleep>;
 599         pinctrl-1 = <&dcan1_pins_sleep>;
 600         pinctrl-2 = <&dcan1_pins_default>;
 601 };
 602
 603 &qspi {
 604         status = "okay";
 605         pinctrl-names = "default";
 606         pinctrl-0 = <&qspi1_pins>;
 607
 608         spi-max-frequency = <76800000>;
 609         m25p80@0 {
 610                 compatible = "s25fl256s1","spi-flash";
 611                 spi-max-frequency = <64000000>;
 612                 reg = <0>;
 613                 spi-tx-bus-width = <1>;
 614                 spi-rx-bus-width = <4>;
 615                 #address-cells = <1>;
 616                 #size-cells = <1>;
 617
 618                 /* MTD partition table.
 619                  * The ROM checks the first four physical blocks
 620                  * for a valid file to boot and the flash here is
 621                  * 64KiB block size.
 622                  */
 623                 partition@0 {
 624                         label = "QSPI.SPL";
 625                         reg = <0x00000000 0x000010000>;
 626                 };
 627                 partition@1 {
 628                         label = "QSPI.SPL.backup1";
 629                         reg = <0x00010000 0x00010000>;
 630                 };
 631                 partition@2 {
 632                         label = "QSPI.SPL.backup2";
 633                         reg = <0x00020000 0x00010000>;
 634                 };
 635                 partition@3 {
 636                         label = "QSPI.SPL.backup3";
 637                         reg = <0x00030000 0x00010000>;
 638                 };
 639                 partition@4 {
 640                         label = "QSPI.u-boot";
 641                         reg = <0x00040000 0x00100000>;
 642                 };
 643                 partition@5 {
 644                         label = "QSPI.u-boot-spl-os";
 645                         reg = <0x00140000 0x00080000>;
 646                 };
 647                 partition@6 {
 648                         label = "QSPI.u-boot-env";
 649                         reg = <0x001c0000 0x00010000>;
 650                 };
 651                 partition@7 {
 652                         label = "QSPI.u-boot-env.backup1";
 653                         reg = <0x001d0000 0x0010000>;
 654                 };
 655                 partition@8 {
 656                         label = "QSPI.kernel";
 657                         reg = <0x001e0000 0x0800000>;
 658                 };
 659                 partition@9 {
 660                         label = "QSPI.file-system";
 661                         reg = <0x009e0000 0x01620000>;
 662                 };
 663         };
 664 };
 665
 666 &dss {
 667         status = "ok";
 668
 669         vdda_video-supply = <&ldo5_reg>;
 670 };
 671
 672 &hdmi {
 673         status = "ok";
 674         vdda-supply = <&ldo3_reg>;
 675
 676         pinctrl-names = "default";
 677         pinctrl-0 = <&hdmi_pins>;
 678
 679         port {
 680                 hdmi_out: endpoint {
 681                         remote-endpoint = <&tpd12s015_in>;
 682                 };
 683         };
 684 };