]> git.sur5r.net Git - u-boot/blob - arch/sandbox/dts/sandbox.dts
sandbox: Rename 'num-gpios' property to avoid dtc warning
[u-boot] / arch / sandbox / dts / sandbox.dts
1 /dts-v1/;
2
3 #define USB_CLASS_HUB                   9
4
5 / {
6         #address-cells = <1>;
7         #size-cells = <1>;
8         model = "sandbox";
9
10         aliases {
11                 eth5 = "/eth@90000000";
12                 i2c0 = &i2c_0;
13                 pci0 = &pci;
14                 rtc0 = &rtc_0;
15         };
16
17         chosen {
18                 stdout-path = "/serial";
19         };
20
21         cros_ec: cros-ec@0 {
22                 reg = <0 0>;
23                 compatible = "google,cros-ec-sandbox";
24
25                 /*
26                  * This describes the flash memory within the EC. Note
27                  * that the STM32L flash erases to 0, not 0xff.
28                  */
29                 #address-cells = <1>;
30                 #size-cells = <1>;
31                 flash@8000000 {
32                         reg = <0x08000000 0x20000>;
33                         erase-value = <0>;
34                         #address-cells = <1>;
35                         #size-cells = <1>;
36
37                         /* Information for sandbox */
38                         ro {
39                                 reg = <0 0xf000>;
40                         };
41                         wp-ro {
42                                 reg = <0xf000 0x1000>;
43                         };
44                         rw {
45                                 reg = <0x10000 0x10000>;
46                         };
47                 };
48         };
49
50         eth@10002000 {
51                 compatible = "sandbox,eth";
52                 reg = <0x10002000 0x1000>;
53                 fake-host-hwaddr = [00 00 66 44 22 00];
54         };
55
56         eth@80000000 {
57                 compatible = "sandbox,eth-raw";
58                 reg = <0x80000000 0x1000>;
59                 host-raw-interface = "eth0";
60         };
61
62         eth@90000000 {
63                 compatible = "sandbox,eth-raw";
64                 reg = <0x90000000 0x1000>;
65                 host-raw-interface = "lo";
66         };
67
68         gpio_a: gpios@0 {
69                 gpio-controller;
70                 compatible = "sandbox,gpio";
71                 #gpio-cells = <1>;
72                 gpio-bank-name = "a";
73                 sandbox,gpio-count = <20>;
74         };
75
76         gpio_b: gpios@1 {
77                 gpio-controller;
78                 compatible = "sandbox,gpio";
79                 #gpio-cells = <2>;
80                 gpio-bank-name = "b";
81                 sandbox,gpio-count = <10>;
82         };
83
84         hexagon {
85                 compatible = "demo-simple";
86                 colour = "white";
87                 sides = <6>;
88         };
89
90         i2c_0: i2c@0 {
91                 #address-cells = <1>;
92                 #size-cells = <0>;
93                 reg = <0 0>;
94                 compatible = "sandbox,i2c";
95                 clock-frequency = <400000>;
96                 pinctrl-names = "default";
97                 pinctrl-0 = <&pinctrl_i2c0>;
98                 eeprom@2c {
99                         reg = <0x2c>;
100                         compatible = "i2c-eeprom";
101                         emul {
102                                 compatible = "sandbox,i2c-eeprom";
103                                 sandbox,filename = "i2c.bin";
104                                 sandbox,size = <128>;
105                         };
106                 };
107
108                 rtc_0: rtc@43 {
109                         reg = <0x43>;
110                         compatible = "sandbox-rtc";
111                         emul {
112                                 compatible = "sandbox,i2c-rtc";
113                         };
114                 };
115                 sandbox_pmic: sandbox_pmic {
116                         reg = <0x40>;
117                 };
118         };
119
120         lcd {
121                 u-boot,dm-pre-reloc;
122                 compatible = "sandbox,lcd-sdl";
123                 xres = <1366>;
124                 yres = <768>;
125         };
126
127         leds {
128                 compatible = "gpio-leds";
129
130                 iracibble {
131                         gpios = <&gpio_a 1 0>;
132                         label = "sandbox:red";
133                 };
134
135                 martinet {
136                         gpios = <&gpio_a 2 0>;
137                         label = "sandbox:green";
138                 };
139         };
140
141         pci: pci-controller {
142                 compatible = "sandbox,pci";
143                 device_type = "pci";
144                 #address-cells = <3>;
145                 #size-cells = <2>;
146                 ranges = <0x02000000 0 0x10000000 0x10000000 0 0x2000
147                                 0x01000000 0 0x20000000 0x20000000 0 0x2000>;
148                 pci@1f,0 {
149                         compatible = "pci-generic";
150                         reg = <0xf800 0 0 0 0>;
151                         emul@1f,0 {
152                                 compatible = "sandbox,swap-case";
153                         };
154                 };
155         };
156
157         pinctrl {
158                 compatible = "sandbox,pinctrl";
159
160                 pinctrl_i2c0: i2c0 {
161                         groups = "i2c";
162                         function = "i2c";
163                         bias-pull-up;
164                 };
165
166                 pinctrl_serial0: uart0 {
167                         groups = "serial_a";
168                         function = "serial";
169                 };
170         };
171
172         reset@1 {
173                 compatible = "sandbox,reset";
174         };
175
176         spi@0 {
177                 #address-cells = <1>;
178                 #size-cells = <0>;
179                 reg = <0 0>;
180                 compatible = "sandbox,spi";
181                 cs-gpios = <0>, <&gpio_a 0>;
182                 firmware_storage_spi: flash@0 {
183                         reg = <0>;
184                         compatible = "spansion,m25p16", "sandbox,spi-flash";
185                         spi-max-frequency = <40000000>;
186                         sandbox,filename = "spi.bin";
187                 };
188         };
189
190         spl-test {
191                 u-boot,dm-pre-reloc;
192                 compatible = "sandbox,spl-test";
193                 boolval;
194                 intval = <1>;
195                 intarray = <2 3 4>;
196                 byteval = [05];
197                 bytearray = [06];
198                 longbytearray = [09 0a 0b 0c 0d 0e 0f 10 11];
199                 stringval = "message";
200                 stringarray = "multi-word", "message";
201         };
202
203         spl-test2 {
204                 u-boot,dm-pre-reloc;
205                 compatible = "sandbox,spl-test";
206                 intval = <3>;
207                 intarray = <5>;
208                 byteval = [08];
209                 bytearray = [01 23 34];
210                 longbytearray = [09 0a 0b 0c];
211                 stringval = "message2";
212                 stringarray = "another", "multi-word", "message";
213         };
214
215         spl-test3 {
216                 u-boot,dm-pre-reloc;
217                 compatible = "sandbox,spl-test";
218                 stringarray = "one";
219         };
220
221         spl-test4 {
222                 u-boot,dm-pre-reloc;
223                 compatible = "sandbox,spl-test.2";
224         };
225
226         square {
227                 compatible = "demo-shape";
228                 colour = "blue";
229                 sides = <4>;
230         };
231
232         timer {
233                 compatible = "sandbox,timer";
234                 clock-frequency = <1000000>;
235         };
236
237         tpm {
238                 compatible = "google,sandbox-tpm";
239         };
240
241         triangle {
242                 compatible = "demo-shape";
243                 colour = "cyan";
244                 sides = <3>;
245                 character = <83>;
246                 light-gpios = <&gpio_a 2>, <&gpio_b 6 0>;
247         };
248
249         /* Needs to be available prior to relocation */
250         uart0: serial {
251                 compatible = "sandbox,serial";
252                 sandbox,text-colour = "cyan";
253                 pinctrl-names = "default";
254                 pinctrl-0 = <&pinctrl_serial0>;
255         };
256
257         usb@0 {
258                 compatible = "sandbox,usb";
259                 status = "disabled";
260                 hub {
261                         compatible = "sandbox,usb-hub";
262                         #address-cells = <1>;
263                         #size-cells = <0>;
264                         flash-stick {
265                                 reg = <0>;
266                                 compatible = "sandbox,usb-flash";
267                         };
268                 };
269         };
270
271         usb@1 {
272                 compatible = "sandbox,usb";
273                 hub {
274                         compatible = "usb-hub";
275                         usb,device-class = <USB_CLASS_HUB>;
276                         hub-emul {
277                                 compatible = "sandbox,usb-hub";
278                                 #address-cells = <1>;
279                                 #size-cells = <0>;
280                                 flash-stick {
281                                         reg = <0>;
282                                         compatible = "sandbox,usb-flash";
283                                         sandbox,filepath = "flash.bin";
284                                 };
285                         };
286                 };
287         };
288
289         usb@2 {
290                 compatible = "sandbox,usb";
291                 status = "disabled";
292         };
293
294         spmi: spmi@0 {
295                 compatible = "sandbox,spmi";
296                 #address-cells = <0x1>;
297                 #size-cells = <0x1>;
298                 pm8916@0 {
299                         compatible = "qcom,spmi-pmic";
300                         reg = <0x0 0x1>;
301                         #address-cells = <0x1>;
302                         #size-cells = <0x1>;
303
304                         spmi_gpios: gpios@c000 {
305                                 compatible = "qcom,pm8916-gpio";
306                                 reg = <0xc000 0x400>;
307                                 gpio-controller;
308                                 gpio-count = <4>;
309                                 #gpio-cells = <2>;
310                                 gpio-bank-name="spmi";
311                         };
312                 };
313         };
314 };
315
316 #include "cros-ec-keyboard.dtsi"
317 #include "sandbox_pmic.dtsi"