git.sur5r.net Git - u-boot/blob - board/engicam/icorem6_rqs/icorem6_rqs.c

   1 /*
   2  * Copyright (C) 2016 Amarula Solutions B.V.
   3  * Copyright (C) 2016 Engicam S.r.l.
   4  * Author: Jagan Teki <jagan@amarulasolutions.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #include <common.h>
  10 #include <mmc.h>
  11
  12 #include <asm/io.h>
  13 #include <asm/gpio.h>
  14 #include <linux/sizes.h>
  15
  16 #include <asm/arch/clock.h>
  17 #include <asm/arch/crm_regs.h>
  18 #include <asm/arch/iomux.h>
  19 #include <asm/arch/mx6-pins.h>
  20 #include <asm/arch/sys_proto.h>
  21 #include <asm/mach-imx/iomux-v3.h>
  22
  23 #include "../common/board.h"
  24
  25 DECLARE_GLOBAL_DATA_PTR;
  26
  27 #ifdef CONFIG_ENV_IS_IN_MMC
  28 int board_mmc_get_env_dev(int devno)
  29 {
  30         /* dev 0 for SD/eSD, dev 1 for MMC/eMMC */
  31         return (devno == 3) ? 1 : 0;
  32 }
  33 #endif
  34
  35 void setenv_fdt_file(void)
  36 {
  37         if (is_mx6dq())
  38                 setenv("fdt_file", "imx6q-icore-rqs.dtb");
  39         else if(is_mx6dl() || is_mx6solo())
  40                 setenv("fdt_file", "imx6dl-icore-rqs.dtb");
  41 }
  42
  43 #ifdef CONFIG_SPL_BUILD
  44 #include <spl.h>
  45
  46 /* MMC board initialization is needed till adding DM support in SPL */
  47 #if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
  48 #include <mmc.h>
  49 #include <fsl_esdhc.h>
  50
  51 #define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE |             \
  52         PAD_CTL_PUS_47K_UP  | PAD_CTL_SPEED_HIGH |               \
  53         PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
  54
  55 static iomux_v3_cfg_t const usdhc3_pads[] = {
  56         IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
  57         IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
  58         IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
  59         IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
  60         IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
  61         IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
  62 };
  63
  64 static iomux_v3_cfg_t const usdhc4_pads[] = {
  65         IOMUX_PADS(PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
  66         IOMUX_PADS(PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
  67         IOMUX_PADS(PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
  68         IOMUX_PADS(PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
  69         IOMUX_PADS(PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
  70         IOMUX_PADS(PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
  71         IOMUX_PADS(PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
  72         IOMUX_PADS(PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
  73         IOMUX_PADS(PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
  74         IOMUX_PADS(PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
  75 };
  76
  77 struct fsl_esdhc_cfg usdhc_cfg[2] = {
  78         {USDHC3_BASE_ADDR, 1, 4},
  79         {USDHC4_BASE_ADDR, 1, 8},
  80 };
  81
  82 int board_mmc_getcd(struct mmc *mmc)
  83 {
  84         struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
  85         int ret = 0;
  86
  87         switch (cfg->esdhc_base) {
  88         case USDHC3_BASE_ADDR:
  89         case USDHC4_BASE_ADDR:
  90                 ret = 1;
  91                 break;
  92         }
  93
  94         return ret;
  95 }
  96
  97 int board_mmc_init(bd_t *bis)
  98 {
  99         int i, ret;
 100
 101         /*
 102         * According to the board_mmc_init() the following map is done:
 103         * (U-boot device node)    (Physical Port)
 104         * mmc0                  USDHC3
 105         * mmc1                  USDHC4
 106         */
 107         for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
 108                 switch (i) {
 109                 case 0:
 110                         SETUP_IOMUX_PADS(usdhc3_pads);
 111                         usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
 112                         break;
 113                 case 1:
 114                         SETUP_IOMUX_PADS(usdhc4_pads);
 115                         usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
 116                         break;
 117                 default:
 118                         printf("Warning - USDHC%d controller not supporting\n",
 119                                i + 1);
 120                         return 0;
 121                 }
 122
 123                 ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
 124                 if (ret) {
 125                         printf("Warning: failed to initialize mmc dev %d\n", i);
 126                         return ret;
 127                 }
 128         }
 129
 130         return 0;
 131 }
 132
 133 #ifdef CONFIG_ENV_IS_IN_MMC
 134 void board_boot_order(u32 *spl_boot_list)
 135 {
 136         u32 bmode = imx6_src_get_boot_mode();
 137         u8 boot_dev = BOOT_DEVICE_MMC1;
 138
 139         switch ((bmode & IMX6_BMODE_MASK) >> IMX6_BMODE_SHIFT) {
 140         case IMX6_BMODE_SD:
 141         case IMX6_BMODE_ESD:
 142                 /* SD/eSD - BOOT_DEVICE_MMC1 */
 143                 break;
 144         case IMX6_BMODE_MMC:
 145         case IMX6_BMODE_EMMC:
 146                 /* MMC/eMMC */
 147                 boot_dev = BOOT_DEVICE_MMC2;
 148                 break;
 149         default:
 150                 /* Default - BOOT_DEVICE_MMC1 */
 151                 printf("Wrong board boot order\n");
 152                 break;
 153         }
 154
 155         spl_boot_list[0] = boot_dev;
 156 }
 157 #endif
 158 #endif
 159
 160 #ifdef CONFIG_SPL_LOAD_FIT
 161 int board_fit_config_name_match(const char *name)
 162 {
 163         if (is_mx6dq() && !strcmp(name, "imx6q-icore-rqs"))
 164                 return 0;
 165         else if ((is_mx6dl() || is_mx6solo()) && !strcmp(name, "imx6dl-icore-rqs"))
 166                 return 0;
 167         else
 168                 return -1;
 169 }
 170 #endif
 171 #endif /* CONFIG_SPL_BUILD */