git.sur5r.net Git - u-boot/blob - board/qualcomm/dragonboard410c/dragonboard410c.c

   1 /*
   2  * Board init file for Dragonboard 410C
   3  *
   4  * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #include <common.h>
  10 #include <dm.h>
  11 #include <usb.h>
  12 #include <asm/gpio.h>
  13
  14 DECLARE_GLOBAL_DATA_PTR;
  15
  16 int dram_init(void)
  17 {
  18         gd->ram_size = PHYS_SDRAM_1_SIZE;
  19         return 0;
  20 }
  21
  22 int dram_init_banksize(void)
  23 {
  24         gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
  25         gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
  26
  27         return 0;
  28 }
  29
  30
  31 int board_prepare_usb(enum usb_init_type type)
  32 {
  33         static struct udevice *pmic_gpio;
  34         static struct gpio_desc hub_reset, usb_sel;
  35         int ret = 0, node;
  36
  37         if (!pmic_gpio) {
  38                 ret = uclass_get_device_by_name(UCLASS_GPIO,
  39                                                 "pm8916_gpios@c000",
  40                                                 &pmic_gpio);
  41                 if (ret < 0) {
  42                         printf("Failed to find pm8916_gpios@c000 node.\n");
  43                         return ret;
  44                 }
  45         }
  46
  47         /* Try to request gpios needed to start usb host on dragonboard */
  48         if (!dm_gpio_is_valid(&hub_reset)) {
  49                 node = fdt_subnode_offset(gd->fdt_blob,
  50                                           dev_of_offset(pmic_gpio),
  51                                           "usb_hub_reset_pm");
  52                 if (node < 0) {
  53                         printf("Failed to find usb_hub_reset_pm dt node.\n");
  54                         return node;
  55                 }
  56                 ret = gpio_request_by_name_nodev(offset_to_ofnode(node),
  57                                                  "gpios", 0, &hub_reset, 0);
  58                 if (ret < 0) {
  59                         printf("Failed to request usb_hub_reset_pm gpio.\n");
  60                         return ret;
  61                 }
  62         }
  63
  64         if (!dm_gpio_is_valid(&usb_sel)) {
  65                 node = fdt_subnode_offset(gd->fdt_blob,
  66                                           dev_of_offset(pmic_gpio),
  67                                           "usb_sw_sel_pm");
  68                 if (node < 0) {
  69                         printf("Failed to find usb_sw_sel_pm dt node.\n");
  70                         return 0;
  71                 }
  72                 ret = gpio_request_by_name_nodev(offset_to_ofnode(node),
  73                                                  "gpios", 0, &usb_sel, 0);
  74                 if (ret < 0) {
  75                         printf("Failed to request usb_sw_sel_pm gpio.\n");
  76                         return ret;
  77                 }
  78         }
  79
  80         if (type == USB_INIT_HOST) {
  81                 /* Start USB Hub */
  82                 dm_gpio_set_dir_flags(&hub_reset,
  83                                       GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
  84                 mdelay(100);
  85                 /* Switch usb to host connectors */
  86                 dm_gpio_set_dir_flags(&usb_sel,
  87                                       GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
  88                 mdelay(100);
  89         } else { /* Device */
  90                 /* Disable hub */
  91                 dm_gpio_set_dir_flags(&hub_reset, GPIOD_IS_OUT);
  92                 /* Switch back to device connector */
  93                 dm_gpio_set_dir_flags(&usb_sel, GPIOD_IS_OUT);
  94         }
  95
  96         return 0;
  97 }
  98
  99 int board_init(void)
 100 {
 101         return 0;
 102 }
 103
 104 /* Check for vol- button - if pressed - stop autoboot */
 105 int misc_init_r(void)
 106 {
 107         struct udevice *pon;
 108         struct gpio_desc resin;
 109         int node, ret;
 110
 111         ret = uclass_get_device_by_name(UCLASS_GPIO, "pm8916_pon@800", &pon);
 112         if (ret < 0) {
 113                 printf("Failed to find PMIC pon node. Check device tree\n");
 114                 return 0;
 115         }
 116
 117         node = fdt_subnode_offset(gd->fdt_blob, dev_of_offset(pon),
 118                                   "key_vol_down");
 119         if (node < 0) {
 120                 printf("Failed to find key_vol_down node. Check device tree\n");
 121                 return 0;
 122         }
 123
 124         if (gpio_request_by_name_nodev(offset_to_ofnode(node), "gpios", 0,
 125                                        &resin, 0)) {
 126                 printf("Failed to request key_vol_down button.\n");
 127                 return 0;
 128         }
 129
 130         if (dm_gpio_get_value(&resin)) {
 131                 env_set("bootdelay", "-1");
 132                 printf("Power button pressed - dropping to console.\n");
 133         }
 134
 135         return 0;
 136 }