git.sur5r.net Git - u-boot/blob - board/socrates/socrates.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * (C) Copyright 2008
   4  * Sergei Poselenov, Emcraft Systems, sposelenov@emcraft.com.
   5  *
   6  * Copyright 2004 Freescale Semiconductor.
   7  * (C) Copyright 2002,2003, Motorola Inc.
   8  * Xianghua Xiao, (X.Xiao@motorola.com)
   9  *
  10  * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
  11  */
  12
  13 #include <common.h>
  14 #include <pci.h>
  15 #include <asm/processor.h>
  16 #include <asm/immap_85xx.h>
  17 #include <ioports.h>
  18 #include <flash.h>
  19 #include <linux/libfdt.h>
  20 #include <fdt_support.h>
  21 #include <asm/io.h>
  22 #include <i2c.h>
  23 #include <mb862xx.h>
  24 #include <video_fb.h>
  25 #include "upm_table.h"
  26
  27 DECLARE_GLOBAL_DATA_PTR;
  28
  29 extern flash_info_t flash_info[];       /* FLASH chips info */
  30 extern GraphicDevice mb862xx;
  31
  32 void local_bus_init (void);
  33 ulong flash_get_size (ulong base, int banknum);
  34
  35 int checkboard (void)
  36 {
  37         volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
  38         char buf[64];
  39         int f;
  40         int i = env_get_f("serial#", buf, sizeof(buf));
  41 #ifdef CONFIG_PCI
  42         char *src;
  43 #endif
  44
  45         puts("Board: Socrates");
  46         if (i > 0) {
  47                 puts(", serial# ");
  48                 puts(buf);
  49         }
  50         putc('\n');
  51
  52 #ifdef CONFIG_PCI
  53         /* Check the PCI_clk sel bit */
  54         if (in_be32(&gur->porpllsr) & (1<<15)) {
  55                 src = "SYSCLK";
  56                 f = CONFIG_SYS_CLK_FREQ;
  57         } else {
  58                 src = "PCI_CLK";
  59                 f = CONFIG_PCI_CLK_FREQ;
  60         }
  61         printf ("PCI1:  32 bit, %d MHz (%s)\n", f/1000000, src);
  62 #else
  63         printf ("PCI1:  disabled\n");
  64 #endif
  65
  66         /*
  67          * Initialize local bus.
  68          */
  69         local_bus_init ();
  70         return 0;
  71 }
  72
  73 int misc_init_r (void)
  74 {
  75         /*
  76          * Adjust flash start and offset to detected values
  77          */
  78         gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
  79         gd->bd->bi_flashoffset = 0;
  80
  81         /*
  82          * Check if boot FLASH isn't max size
  83          */
  84         if (gd->bd->bi_flashsize < (0 - CONFIG_SYS_FLASH0)) {
  85                 set_lbc_or(0, gd->bd->bi_flashstart |
  86                            (CONFIG_SYS_OR0_PRELIM & 0x00007fff));
  87                 set_lbc_br(0, gd->bd->bi_flashstart |
  88                            (CONFIG_SYS_BR0_PRELIM & 0x00007fff));
  89
  90                 /*
  91                  * Re-check to get correct base address
  92                  */
  93                 flash_get_size(gd->bd->bi_flashstart, CONFIG_SYS_MAX_FLASH_BANKS - 1);
  94         }
  95
  96         /*
  97          * Check if only one FLASH bank is available
  98          */
  99         if (gd->bd->bi_flashsize != CONFIG_SYS_MAX_FLASH_BANKS * (0 - CONFIG_SYS_FLASH0)) {
 100                 set_lbc_or(1, 0);
 101                 set_lbc_br(1, 0);
 102
 103                 /*
 104                  * Re-do flash protection upon new addresses
 105                  */
 106                 flash_protect (FLAG_PROTECT_CLEAR,
 107                                gd->bd->bi_flashstart, 0xffffffff,
 108                                &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
 109
 110                 /* Monitor protection ON by default */
 111                 flash_protect (FLAG_PROTECT_SET,
 112                                CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
 113                                &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
 114
 115                 /* Environment protection ON by default */
 116                 flash_protect (FLAG_PROTECT_SET,
 117                                CONFIG_ENV_ADDR,
 118                                CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
 119                                &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
 120
 121                 /* Redundant environment protection ON by default */
 122                 flash_protect (FLAG_PROTECT_SET,
 123                                CONFIG_ENV_ADDR_REDUND,
 124                                CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
 125                                &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
 126         }
 127
 128         return 0;
 129 }
 130
 131 /*
 132  * Initialize Local Bus
 133  */
 134 void local_bus_init (void)
 135 {
 136         volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 137         volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
 138         sys_info_t sysinfo;
 139         uint clkdiv;
 140         uint lbc_mhz;
 141         uint lcrr = CONFIG_SYS_LBC_LCRR;
 142
 143         get_sys_info (&sysinfo);
 144         clkdiv = lbc->lcrr & LCRR_CLKDIV;
 145         lbc_mhz = sysinfo.freq_systembus / 1000000 / clkdiv;
 146
 147         /* Disable PLL bypass for Local Bus Clock >= 66 MHz */
 148         if (lbc_mhz >= 66)
 149                 lcrr &= ~LCRR_DBYP;     /* DLL Enabled */
 150         else
 151                 lcrr |= LCRR_DBYP;      /* DLL Bypass */
 152
 153         out_be32 (&lbc->lcrr, lcrr);
 154         asm ("sync;isync;msync");
 155
 156         out_be32 (&lbc->ltesr, 0xffffffff);     /* Clear LBC error interrupts */
 157         out_be32 (&lbc->lteir, 0xffffffff);     /* Enable LBC error interrupts */
 158         out_be32 (&ecm->eedr, 0xffffffff);      /* Clear ecm errors */
 159         out_be32 (&ecm->eeer, 0xffffffff);      /* Enable ecm errors */
 160
 161         /* Init UPMA for FPGA access */
 162         out_be32 (&lbc->mamr, 0x44440); /* Use a customer-supplied value */
 163         upmconfig (UPMA, (uint *)UPMTableA, sizeof(UPMTableA)/sizeof(int));
 164
 165         /* Init UPMB for Lime controller access */
 166         out_be32 (&lbc->mbmr, 0x444440); /* Use a customer-supplied value */
 167         upmconfig (UPMB, (uint *)UPMTableB, sizeof(UPMTableB)/sizeof(int));
 168 }
 169
 170 #if defined(CONFIG_PCI)
 171 /*
 172  * Initialize PCI Devices, report devices found.
 173  */
 174
 175 #ifndef CONFIG_PCI_PNP
 176 static struct pci_config_table pci_mpc85xxads_config_table[] = {
 177         {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
 178          PCI_IDSEL_NUMBER, PCI_ANY_ID,
 179          pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
 180                                      PCI_ENET0_MEMADDR,
 181                                      PCI_COMMAND_MEMORY |
 182                                      PCI_COMMAND_MASTER}},
 183         {}
 184 };
 185 #endif
 186
 187
 188 static struct pci_controller hose = {
 189 #ifndef CONFIG_PCI_PNP
 190         config_table:pci_mpc85xxads_config_table,
 191 #endif
 192 };
 193
 194 #endif /* CONFIG_PCI */
 195
 196
 197 void pci_init_board (void)
 198 {
 199 #ifdef CONFIG_PCI
 200         pci_mpc85xx_init (&hose);
 201 #endif /* CONFIG_PCI */
 202 }
 203
 204 #ifdef CONFIG_BOARD_EARLY_INIT_R
 205 int board_early_init_r (void)
 206 {
 207         volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 208
 209         /* set and reset the GPIO pin 2 which will reset the W83782G chip */
 210         out_8((unsigned char*)&gur->gpoutdr, 0x3F );
 211         out_be32((unsigned int*)&gur->gpiocr, 0x200 );  /* enable GPOut */
 212         udelay(200);
 213         out_8( (unsigned char*)&gur->gpoutdr, 0x1F );
 214
 215         return (0);
 216 }
 217 #endif /* CONFIG_BOARD_EARLY_INIT_R */
 218
 219 #ifdef CONFIG_OF_BOARD_SETUP
 220 int ft_board_setup(void *blob, bd_t *bd)
 221 {
 222         u32 val[12];
 223         int rc, i = 0;
 224
 225         ft_cpu_setup(blob, bd);
 226
 227         /* Fixup NOR FLASH mapping */
 228         val[i++] = 0;                           /* chip select number */
 229         val[i++] = 0;                           /* always 0 */
 230         val[i++] = gd->bd->bi_flashstart;
 231         val[i++] = gd->bd->bi_flashsize;
 232
 233         if (mb862xx.frameAdrs == CONFIG_SYS_LIME_BASE) {
 234                 /* Fixup LIME mapping */
 235                 val[i++] = 2;                   /* chip select number */
 236                 val[i++] = 0;                   /* always 0 */
 237                 val[i++] = CONFIG_SYS_LIME_BASE;
 238                 val[i++] = CONFIG_SYS_LIME_SIZE;
 239         }
 240
 241         /* Fixup FPGA mapping */
 242         val[i++] = 3;                           /* chip select number */
 243         val[i++] = 0;                           /* always 0 */
 244         val[i++] = CONFIG_SYS_FPGA_BASE;
 245         val[i++] = CONFIG_SYS_FPGA_SIZE;
 246
 247         rc = fdt_find_and_setprop(blob, "/localbus", "ranges",
 248                                   val, i * sizeof(u32), 1);
 249         if (rc)
 250                 printf("Unable to update localbus ranges, err=%s\n",
 251                        fdt_strerror(rc));
 252
 253         return 0;
 254 }
 255 #endif /* CONFIG_OF_BOARD_SETUP */
 256
 257 #define DEFAULT_BRIGHTNESS      25
 258 #define BACKLIGHT_ENABLE        (1 << 31)
 259
 260 static const gdc_regs init_regs [] =
 261 {
 262         {0x0100, 0x00010f00},
 263         {0x0020, 0x801901df},
 264         {0x0024, 0x00000000},
 265         {0x0028, 0x00000000},
 266         {0x002c, 0x00000000},
 267         {0x0110, 0x00000000},
 268         {0x0114, 0x00000000},
 269         {0x0118, 0x01df0320},
 270         {0x0004, 0x041f0000},
 271         {0x0008, 0x031f031f},
 272         {0x000c, 0x017f0349},
 273         {0x0010, 0x020c0000},
 274         {0x0014, 0x01df01e9},
 275         {0x0018, 0x00000000},
 276         {0x001c, 0x01e00320},
 277         {0x0100, 0x80010f00},
 278         {0x0, 0x0}
 279 };
 280
 281 const gdc_regs *board_get_regs (void)
 282 {
 283         return init_regs;
 284 }
 285
 286 int lime_probe(void)
 287 {
 288         uint cfg_br2;
 289         uint cfg_or2;
 290         int type;
 291
 292         cfg_br2 = get_lbc_br(2);
 293         cfg_or2 = get_lbc_or(2);
 294
 295         /* Configure GPCM for CS2 */
 296         set_lbc_br(2, 0);
 297         set_lbc_or(2, 0xfc000410);
 298         set_lbc_br(2, (CONFIG_SYS_LIME_BASE) | 0x00001901);
 299
 300         /* Get controller type */
 301         type = mb862xx_probe(CONFIG_SYS_LIME_BASE);
 302
 303         /* Restore previous CS2 configuration */
 304         set_lbc_br(2, 0);
 305         set_lbc_or(2, cfg_or2);
 306         set_lbc_br(2, cfg_br2);
 307
 308         return (type == MB862XX_TYPE_LIME) ? 1 : 0;
 309 }
 310
 311 /* Returns Lime base address */
 312 unsigned int board_video_init (void)
 313 {
 314         if (!lime_probe())
 315                 return 0;
 316
 317         mb862xx.winSizeX = 800;
 318         mb862xx.winSizeY = 480;
 319         mb862xx.gdfIndex = GDF_15BIT_555RGB;
 320         mb862xx.gdfBytesPP = 2;
 321
 322         return CONFIG_SYS_LIME_BASE;
 323 }
 324
 325 #define W83782D_REG_CFG         0x40
 326 #define W83782D_REG_BANK_SEL    0x4e
 327 #define W83782D_REG_ADCCLK      0x4b
 328 #define W83782D_REG_BEEP_CTRL   0x4d
 329 #define W83782D_REG_BEEP_CTRL2  0x57
 330 #define W83782D_REG_PWMOUT1     0x5b
 331 #define W83782D_REG_VBAT        0x5d
 332
 333 static int w83782d_hwmon_init(void)
 334 {
 335         u8 buf;
 336
 337         if (i2c_read(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_CFG, 1, &buf, 1))
 338                 return -1;
 339
 340         i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_CFG, 0x80);
 341         i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_BANK_SEL, 0);
 342         i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_ADCCLK, 0x40);
 343
 344         buf = i2c_reg_read(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_BEEP_CTRL);
 345         i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_BEEP_CTRL,
 346                       buf | 0x80);
 347         i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_BEEP_CTRL2, 0);
 348         i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_PWMOUT1, 0x47);
 349         i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_VBAT, 0x01);
 350
 351         buf = i2c_reg_read(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_CFG);
 352         i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_CFG,
 353                       (buf & 0xf4) | 0x01);
 354         return 0;
 355 }
 356
 357 static void board_backlight_brightness(int br)
 358 {
 359         u32 reg;
 360         u8 buf;
 361         u8 old_buf;
 362
 363         /* Select bank 0 */
 364         if (i2c_read(CONFIG_SYS_I2C_W83782G_ADDR, 0x4e, 1, &old_buf, 1))
 365                 goto err;
 366         else
 367                 buf = old_buf & 0xf8;
 368
 369         if (i2c_write(CONFIG_SYS_I2C_W83782G_ADDR, 0x4e, 1, &buf, 1))
 370                 goto err;
 371
 372         if (br > 0) {
 373                 /* PWMOUT1 duty cycle ctrl */
 374                 buf = 255 / (100 / br);
 375                 if (i2c_write(CONFIG_SYS_I2C_W83782G_ADDR, 0x5b, 1, &buf, 1))
 376                         goto err;
 377
 378                 /* LEDs on */
 379                 reg = in_be32((void *)(CONFIG_SYS_FPGA_BASE + 0x0c));
 380                 if (!(reg & BACKLIGHT_ENABLE))
 381                         out_be32((void *)(CONFIG_SYS_FPGA_BASE + 0x0c),
 382                                  reg | BACKLIGHT_ENABLE);
 383         } else {
 384                 buf = 0;
 385                 if (i2c_write(CONFIG_SYS_I2C_W83782G_ADDR, 0x5b, 1, &buf, 1))
 386                         goto err;
 387
 388                 /* LEDs off */
 389                 reg = in_be32((void *)(CONFIG_SYS_FPGA_BASE + 0x0c));
 390                 reg &= ~BACKLIGHT_ENABLE;
 391                 out_be32((void *)(CONFIG_SYS_FPGA_BASE + 0x0c), reg);
 392         }
 393         /* Restore previous bank setting */
 394         if (i2c_write(CONFIG_SYS_I2C_W83782G_ADDR, 0x4e, 1, &old_buf, 1))
 395                 goto err;
 396
 397         return;
 398 err:
 399         printf("W83782G I2C access failed\n");
 400 }
 401
 402 void board_backlight_switch (int flag)
 403 {
 404         char * param;
 405         int rc;
 406
 407         if (w83782d_hwmon_init())
 408                 printf ("hwmon IC init failed\n");
 409
 410         if (flag) {
 411                 param = env_get("brightness");
 412                 rc = param ? simple_strtol(param, NULL, 10) : -1;
 413                 if (rc < 0)
 414                         rc = DEFAULT_BRIGHTNESS;
 415         } else {
 416                 rc = 0;
 417         }
 418         board_backlight_brightness(rc);
 419 }
 420
 421 #if defined(CONFIG_CONSOLE_EXTRA_INFO)
 422 /*
 423  * Return text to be printed besides the logo.
 424  */
 425 void video_get_info_str (int line_number, char *info)
 426 {
 427         if (line_number == 1) {
 428                 strcpy (info, " Board: Socrates");
 429         } else {
 430                 info [0] = '\0';
 431         }
 432 }
 433 #endif