git.sur5r.net Git - u-boot/blob - board/technologic/ts4800/ts4800.c

   1 /*
   2  * (C) Copyright 2015 Savoir-faire Linux Inc.
   3  *
   4  * Derived from MX51EVK code by
   5  *   Freescale Semiconductor, Inc.
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #include <common.h>
  11 #include <asm/io.h>
  12 #include <asm/gpio.h>
  13 #include <asm/arch/imx-regs.h>
  14 #include <asm/arch/iomux-mx51.h>
  15 #include <linux/errno.h>
  16 #include <asm/arch/sys_proto.h>
  17 #include <asm/arch/crm_regs.h>
  18 #include <asm/arch/clock.h>
  19 #include <asm/mach-imx/mx5_video.h>
  20 #include <mmc.h>
  21 #include <fsl_esdhc.h>
  22 #include <mc13892.h>
  23
  24 #include <malloc.h>
  25 #include <netdev.h>
  26 #include <phy.h>
  27 #include "ts4800.h"
  28
  29 DECLARE_GLOBAL_DATA_PTR;
  30
  31 #ifdef CONFIG_FSL_ESDHC
  32 struct fsl_esdhc_cfg esdhc_cfg[2] = {
  33         {MMC_SDHC1_BASE_ADDR},
  34         {MMC_SDHC2_BASE_ADDR},
  35 };
  36 #endif
  37
  38 int dram_init(void)
  39 {
  40         /* dram_init must store complete ramsize in gd->ram_size */
  41         gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
  42                                 PHYS_SDRAM_1_SIZE);
  43         return 0;
  44 }
  45
  46 u32 get_board_rev(void)
  47 {
  48         u32 rev = get_cpu_rev();
  49         if (!gpio_get_value(IMX_GPIO_NR(1, 22)))
  50                 rev |= BOARD_REV_2_0 << BOARD_VER_OFFSET;
  51         return rev;
  52 }
  53
  54 #define UART_PAD_CTRL   (PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_DSE_HIGH)
  55
  56 static void setup_iomux_uart(void)
  57 {
  58         static const iomux_v3_cfg_t uart_pads[] = {
  59                 MX51_PAD_UART1_RXD__UART1_RXD,
  60                 MX51_PAD_UART1_TXD__UART1_TXD,
  61                 NEW_PAD_CTRL(MX51_PAD_UART1_RTS__UART1_RTS, UART_PAD_CTRL),
  62                 NEW_PAD_CTRL(MX51_PAD_UART1_CTS__UART1_CTS, UART_PAD_CTRL),
  63         };
  64
  65         imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
  66 }
  67
  68 static void setup_iomux_fec(void)
  69 {
  70         static const iomux_v3_cfg_t fec_pads[] = {
  71                 NEW_PAD_CTRL(MX51_PAD_EIM_EB2__FEC_MDIO,
  72                                 PAD_CTL_HYS |
  73                                 PAD_CTL_PUS_22K_UP |
  74                                 PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST),
  75                 MX51_PAD_EIM_EB3__FEC_RDATA1,
  76                 NEW_PAD_CTRL(MX51_PAD_EIM_CS2__FEC_RDATA2, PAD_CTL_HYS),
  77                 MX51_PAD_EIM_CS3__FEC_RDATA3,
  78                 MX51_PAD_NANDF_CS2__FEC_TX_ER,
  79                 MX51_PAD_EIM_CS5__FEC_CRS,
  80                 MX51_PAD_EIM_CS4__FEC_RX_ER,
  81                 /* PAD used on TS4800 */
  82                 MX51_PAD_DI2_PIN2__FEC_MDC,
  83                 MX51_PAD_DISP2_DAT14__FEC_RDAT0,
  84                 MX51_PAD_DISP2_DAT10__FEC_COL,
  85                 MX51_PAD_DISP2_DAT11__FEC_RXCLK,
  86                 MX51_PAD_DISP2_DAT15__FEC_TDAT0,
  87                 MX51_PAD_DISP2_DAT6__FEC_TDAT1,
  88                 MX51_PAD_DISP2_DAT7__FEC_TDAT2,
  89                 MX51_PAD_DISP2_DAT8__FEC_TDAT3,
  90                 MX51_PAD_DISP2_DAT9__FEC_TX_EN,
  91                 MX51_PAD_DISP2_DAT13__FEC_TX_CLK,
  92                 MX51_PAD_DISP2_DAT12__FEC_RX_DV,
  93         };
  94
  95         imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
  96 }
  97
  98 #ifdef CONFIG_FSL_ESDHC
  99 int board_mmc_getcd(struct mmc *mmc)
 100 {
 101         struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
 102         int ret;
 103
 104         imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_GPIO1_0__GPIO1_0,
 105                                                 NO_PAD_CTRL));
 106         gpio_direction_input(IMX_GPIO_NR(1, 0));
 107         imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_GPIO1_6__GPIO1_6,
 108                                                 NO_PAD_CTRL));
 109         gpio_direction_input(IMX_GPIO_NR(1, 6));
 110
 111         if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
 112                 ret = !gpio_get_value(IMX_GPIO_NR(1, 0));
 113         else
 114                 ret = !gpio_get_value(IMX_GPIO_NR(1, 6));
 115
 116         return ret;
 117 }
 118
 119 int board_mmc_init(bd_t *bis)
 120 {
 121         static const iomux_v3_cfg_t sd1_pads[] = {
 122                 NEW_PAD_CTRL(MX51_PAD_SD1_CMD__SD1_CMD, PAD_CTL_DSE_MAX |
 123                         PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST),
 124                 NEW_PAD_CTRL(MX51_PAD_SD1_CLK__SD1_CLK, PAD_CTL_DSE_MAX |
 125                         PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST),
 126                 NEW_PAD_CTRL(MX51_PAD_SD1_DATA0__SD1_DATA0, PAD_CTL_DSE_MAX |
 127                         PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST),
 128                 NEW_PAD_CTRL(MX51_PAD_SD1_DATA1__SD1_DATA1, PAD_CTL_DSE_MAX |
 129                         PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST),
 130                 NEW_PAD_CTRL(MX51_PAD_SD1_DATA2__SD1_DATA2, PAD_CTL_DSE_MAX |
 131                         PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST),
 132                 NEW_PAD_CTRL(MX51_PAD_SD1_DATA3__SD1_DATA3, PAD_CTL_DSE_MAX |
 133                         PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_SRE_FAST),
 134                 NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_HYS),
 135                 NEW_PAD_CTRL(MX51_PAD_GPIO1_1__SD1_WP, PAD_CTL_HYS),
 136         };
 137
 138         esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
 139
 140         imx_iomux_v3_setup_multiple_pads(sd1_pads, ARRAY_SIZE(sd1_pads));
 141
 142         return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
 143 }
 144 #endif
 145
 146 int board_early_init_f(void)
 147 {
 148         setup_iomux_uart();
 149         setup_iomux_fec();
 150
 151         return 0;
 152 }
 153
 154 int board_init(void)
 155 {
 156         /* address of boot parameters */
 157         gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
 158
 159         return 0;
 160 }
 161
 162 /*
 163  * Read the MAC address from FEC's registers PALR PAUR.
 164  * User is supposed to configure these registers when MAC address is known
 165  * from another source (fuse), but on TS4800, MAC address is not fused and
 166  * the bootrom configure these registers on startup.
 167  */
 168 static int fec_get_mac_from_register(uint32_t base_addr)
 169 {
 170         unsigned char ethaddr[6];
 171         u32 reg_mac[2];
 172         int i;
 173
 174         reg_mac[0] = in_be32(base_addr + 0xE4);
 175         reg_mac[1] = in_be32(base_addr + 0xE8);
 176
 177         for(i = 0; i < 6; i++)
 178                 ethaddr[i] = (reg_mac[i / 4] >> ((i % 4) * 8)) & 0xFF;
 179
 180         if (is_valid_ethaddr(ethaddr)) {
 181                 eth_setenv_enetaddr("ethaddr", ethaddr);
 182                 return 0;
 183         }
 184
 185         return -1;
 186 }
 187
 188 #define TS4800_GPIO_FEC_PHY_RES         IMX_GPIO_NR(2, 14)
 189 int board_eth_init(bd_t *bd)
 190 {
 191         int dev_id = -1;
 192         int phy_id = 0xFF;
 193         uint32_t addr = IMX_FEC_BASE;
 194
 195         uint32_t base_mii;
 196         struct mii_dev *bus = NULL;
 197         struct phy_device *phydev = NULL;
 198         int ret;
 199
 200         /* reset FEC phy */
 201         imx_iomux_v3_setup_pad(MX51_PAD_EIM_A20__GPIO2_14);
 202         gpio_direction_output(TS4800_GPIO_FEC_PHY_RES, 0);
 203         mdelay(1);
 204         gpio_set_value(TS4800_GPIO_FEC_PHY_RES, 1);
 205         mdelay(1);
 206
 207         base_mii = addr;
 208         debug("eth_init: fec_probe(bd, %i, %i) @ %08x\n", dev_id, phy_id, addr);
 209         bus = fec_get_miibus(base_mii, dev_id);
 210         if (!bus)
 211                 return -ENOMEM;
 212
 213         phydev = phy_find_by_mask(bus, phy_id, PHY_INTERFACE_MODE_MII);
 214         if (!phydev) {
 215                 free(bus);
 216                 return -ENOMEM;
 217         }
 218
 219         if (fec_get_mac_from_register(addr))
 220                 printf("eth_init: failed to get MAC address\n");
 221
 222         ret = fec_probe(bd, dev_id, addr, bus, phydev);
 223         if (ret) {
 224                 free(phydev);
 225                 free(bus);
 226         }
 227
 228         return ret;
 229 }
 230
 231 /*
 232  * Do not overwrite the console
 233  * Use always serial for U-Boot console
 234  */
 235 int overwrite_console(void)
 236 {
 237         return 1;
 238 }
 239
 240 int checkboard(void)
 241 {
 242         puts("Board: TS4800\n");
 243
 244         return 0;
 245 }
 246
 247 void hw_watchdog_reset(void)
 248 {
 249         struct ts4800_wtd_regs *wtd = (struct ts4800_wtd_regs *) (TS4800_SYSCON_BASE + 0xE);
 250         /* feed the watchdog for another 10s */
 251         writew(0x2, &wtd->feed);
 252 }
 253
 254 void hw_watchdog_init(void)
 255 {
 256         return;
 257 }