git.sur5r.net Git - u-boot/blob - cmd/fpga.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * (C) Copyright 2000, 2001
   4  * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
   5  */
   6
   7 /*
   8  *  FPGA support
   9  */
  10 #include <common.h>
  11 #include <command.h>
  12 #include <fpga.h>
  13 #include <fs.h>
  14 #include <malloc.h>
  15
  16 /* Local functions */
  17 static int fpga_get_op(char *opstr);
  18
  19 /* Local defines */
  20 enum {
  21         FPGA_NONE = -1,
  22         FPGA_INFO,
  23         FPGA_LOAD,
  24         FPGA_LOADB,
  25         FPGA_DUMP,
  26         FPGA_LOADMK,
  27         FPGA_LOADP,
  28         FPGA_LOADBP,
  29         FPGA_LOADFS,
  30 };
  31
  32 /* ------------------------------------------------------------------------- */
  33 /* command form:
  34  *   fpga <op> <device number> <data addr> <datasize>
  35  * where op is 'load', 'dump', or 'info'
  36  * If there is no device number field, the fpga environment variable is used.
  37  * If there is no data addr field, the fpgadata environment variable is used.
  38  * The info command requires no data address field.
  39  */
  40 int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
  41 {
  42         int op, dev = FPGA_INVALID_DEVICE;
  43         size_t data_size = 0;
  44         void *fpga_data = NULL;
  45         char *devstr = env_get("fpga");
  46         char *datastr = env_get("fpgadata");
  47         int rc = FPGA_FAIL;
  48         int wrong_parms = 0;
  49 #if defined(CONFIG_FIT)
  50         const char *fit_uname = NULL;
  51         ulong fit_addr;
  52 #endif
  53 #if defined(CONFIG_CMD_FPGA_LOADFS)
  54         fpga_fs_info fpga_fsinfo;
  55         fpga_fsinfo.fstype = FS_TYPE_ANY;
  56 #endif
  57
  58         if (devstr)
  59                 dev = (int) simple_strtoul(devstr, NULL, 16);
  60         if (datastr)
  61                 fpga_data = (void *)simple_strtoul(datastr, NULL, 16);
  62
  63         switch (argc) {
  64 #if defined(CONFIG_CMD_FPGA_LOADFS)
  65         case 9:
  66                 fpga_fsinfo.blocksize = (unsigned int)
  67                                              simple_strtoul(argv[5], NULL, 16);
  68                 fpga_fsinfo.interface = argv[6];
  69                 fpga_fsinfo.dev_part = argv[7];
  70                 fpga_fsinfo.filename = argv[8];
  71 #endif
  72         case 5:         /* fpga <op> <dev> <data> <datasize> */
  73                 data_size = simple_strtoul(argv[4], NULL, 16);
  74
  75         case 4:         /* fpga <op> <dev> <data> */
  76 #if defined(CONFIG_FIT)
  77                 if (fit_parse_subimage(argv[3], (ulong)fpga_data,
  78                                        &fit_addr, &fit_uname)) {
  79                         fpga_data = (void *)fit_addr;
  80                         debug("*  fpga: subimage '%s' from FIT image ",
  81                               fit_uname);
  82                         debug("at 0x%08lx\n", fit_addr);
  83                 } else
  84 #endif
  85                 {
  86                         fpga_data = (void *)simple_strtoul(argv[3], NULL, 16);
  87                         debug("*  fpga: cmdline image address = 0x%08lx\n",
  88                               (ulong)fpga_data);
  89                 }
  90                 debug("%s: fpga_data = 0x%lx\n", __func__, (ulong)fpga_data);
  91
  92         case 3:         /* fpga <op> <dev | data addr> */
  93                 dev = (int)simple_strtoul(argv[2], NULL, 16);
  94                 debug("%s: device = %d\n", __func__, dev);
  95                 /* FIXME - this is a really weak test */
  96                 if ((argc == 3) && (dev > fpga_count())) {
  97                         /* must be buffer ptr */
  98                         debug("%s: Assuming buffer pointer in arg 3\n",
  99                               __func__);
 100
 101 #if defined(CONFIG_FIT)
 102                         if (fit_parse_subimage(argv[2], (ulong)fpga_data,
 103                                                &fit_addr, &fit_uname)) {
 104                                 fpga_data = (void *)fit_addr;
 105                                 debug("*  fpga: subimage '%s' from FIT image ",
 106                                       fit_uname);
 107                                 debug("at 0x%08lx\n", fit_addr);
 108                         } else
 109 #endif
 110                         {
 111                                 fpga_data = (void *)(uintptr_t)dev;
 112                                 debug("*  fpga: cmdline image addr = 0x%08lx\n",
 113                                       (ulong)fpga_data);
 114                         }
 115
 116                         debug("%s: fpga_data = 0x%lx\n",
 117                               __func__, (ulong)fpga_data);
 118                         dev = FPGA_INVALID_DEVICE;      /* reset device num */
 119                 }
 120
 121         case 2:         /* fpga <op> */
 122                 op = (int)fpga_get_op(argv[1]);
 123                 break;
 124
 125         default:
 126                 debug("%s: Too many or too few args (%d)\n", __func__, argc);
 127                 op = FPGA_NONE; /* force usage display */
 128                 break;
 129         }
 130
 131         if (dev == FPGA_INVALID_DEVICE) {
 132                 puts("FPGA device not specified\n");
 133                 op = FPGA_NONE;
 134         }
 135
 136         switch (op) {
 137         case FPGA_NONE:
 138         case FPGA_INFO:
 139                 break;
 140 #if defined(CONFIG_CMD_FPGA_LOADFS)
 141         case FPGA_LOADFS:
 142                 /* Blocksize can be zero */
 143                 if (!fpga_fsinfo.interface || !fpga_fsinfo.dev_part ||
 144                     !fpga_fsinfo.filename)
 145                         wrong_parms = 1;
 146 #endif
 147         case FPGA_LOAD:
 148         case FPGA_LOADP:
 149         case FPGA_LOADB:
 150         case FPGA_LOADBP:
 151         case FPGA_DUMP:
 152                 if (!fpga_data || !data_size)
 153                         wrong_parms = 1;
 154                 break;
 155 #if defined(CONFIG_CMD_FPGA_LOADMK)
 156         case FPGA_LOADMK:
 157                 if (!fpga_data)
 158                         wrong_parms = 1;
 159                 break;
 160 #endif
 161         }
 162
 163         if (wrong_parms) {
 164                 puts("Wrong parameters for FPGA request\n");
 165                 op = FPGA_NONE;
 166         }
 167
 168         switch (op) {
 169         case FPGA_NONE:
 170                 return CMD_RET_USAGE;
 171
 172         case FPGA_INFO:
 173                 rc = fpga_info(dev);
 174                 break;
 175
 176         case FPGA_LOAD:
 177                 rc = fpga_load(dev, fpga_data, data_size, BIT_FULL);
 178                 break;
 179
 180 #if defined(CONFIG_CMD_FPGA_LOADP)
 181         case FPGA_LOADP:
 182                 rc = fpga_load(dev, fpga_data, data_size, BIT_PARTIAL);
 183                 break;
 184 #endif
 185
 186         case FPGA_LOADB:
 187                 rc = fpga_loadbitstream(dev, fpga_data, data_size, BIT_FULL);
 188                 break;
 189
 190 #if defined(CONFIG_CMD_FPGA_LOADBP)
 191         case FPGA_LOADBP:
 192                 rc = fpga_loadbitstream(dev, fpga_data, data_size, BIT_PARTIAL);
 193                 break;
 194 #endif
 195
 196 #if defined(CONFIG_CMD_FPGA_LOADFS)
 197         case FPGA_LOADFS:
 198                 rc = fpga_fsload(dev, fpga_data, data_size, &fpga_fsinfo);
 199                 break;
 200 #endif
 201
 202 #if defined(CONFIG_CMD_FPGA_LOADMK)
 203         case FPGA_LOADMK:
 204                 switch (genimg_get_format(fpga_data)) {
 205 #if defined(CONFIG_IMAGE_FORMAT_LEGACY)
 206                 case IMAGE_FORMAT_LEGACY:
 207                         {
 208                                 image_header_t *hdr =
 209                                                 (image_header_t *)fpga_data;
 210                                 ulong data;
 211                                 uint8_t comp;
 212
 213                                 comp = image_get_comp(hdr);
 214                                 if (comp == IH_COMP_GZIP) {
 215 #if defined(CONFIG_GZIP)
 216                                         ulong image_buf = image_get_data(hdr);
 217                                         data = image_get_load(hdr);
 218                                         ulong image_size = ~0UL;
 219
 220                                         if (gunzip((void *)data, ~0UL,
 221                                                    (void *)image_buf,
 222                                                    &image_size) != 0) {
 223                                                 puts("GUNZIP: error\n");
 224                                                 return 1;
 225                                         }
 226                                         data_size = image_size;
 227 #else
 228                                         puts("Gunzip image is not supported\n");
 229                                         return 1;
 230 #endif
 231                                 } else {
 232                                         data = (ulong)image_get_data(hdr);
 233                                         data_size = image_get_data_size(hdr);
 234                                 }
 235                                 rc = fpga_load(dev, (void *)data, data_size,
 236                                                BIT_FULL);
 237                         }
 238                         break;
 239 #endif
 240 #if defined(CONFIG_FIT)
 241                 case IMAGE_FORMAT_FIT:
 242                         {
 243                                 const void *fit_hdr = (const void *)fpga_data;
 244                                 int noffset;
 245                                 const void *fit_data;
 246
 247                                 if (fit_uname == NULL) {
 248                                         puts("No FIT subimage unit name\n");
 249                                         return 1;
 250                                 }
 251
 252                                 if (!fit_check_format(fit_hdr)) {
 253                                         puts("Bad FIT image format\n");
 254                                         return 1;
 255                                 }
 256
 257                                 /* get fpga component image node offset */
 258                                 noffset = fit_image_get_node(fit_hdr,
 259                                                              fit_uname);
 260                                 if (noffset < 0) {
 261                                         printf("Can't find '%s' FIT subimage\n",
 262                                                fit_uname);
 263                                         return 1;
 264                                 }
 265
 266                                 /* verify integrity */
 267                                 if (!fit_image_verify(fit_hdr, noffset)) {
 268                                         puts ("Bad Data Hash\n");
 269                                         return 1;
 270                                 }
 271
 272                                 /* get fpga subimage data address and length */
 273                                 if (fit_image_get_data(fit_hdr, noffset,
 274                                                        &fit_data, &data_size)) {
 275                                         puts("Fpga subimage data not found\n");
 276                                         return 1;
 277                                 }
 278
 279                                 rc = fpga_load(dev, fit_data, data_size,
 280                                                BIT_FULL);
 281                         }
 282                         break;
 283 #endif
 284                 default:
 285                         puts("** Unknown image type\n");
 286                         rc = FPGA_FAIL;
 287                         break;
 288                 }
 289                 break;
 290 #endif
 291
 292         case FPGA_DUMP:
 293                 rc = fpga_dump(dev, fpga_data, data_size);
 294                 break;
 295
 296         default:
 297                 printf("Unknown operation\n");
 298                 return CMD_RET_USAGE;
 299         }
 300         return rc;
 301 }
 302
 303 /*
 304  * Map op to supported operations.  We don't use a table since we
 305  * would just have to relocate it from flash anyway.
 306  */
 307 static int fpga_get_op(char *opstr)
 308 {
 309         int op = FPGA_NONE;
 310
 311         if (!strcmp("info", opstr))
 312                 op = FPGA_INFO;
 313         else if (!strcmp("loadb", opstr))
 314                 op = FPGA_LOADB;
 315         else if (!strcmp("load", opstr))
 316                 op = FPGA_LOAD;
 317 #if defined(CONFIG_CMD_FPGA_LOADP)
 318         else if (!strcmp("loadp", opstr))
 319                 op = FPGA_LOADP;
 320 #endif
 321 #if defined(CONFIG_CMD_FPGA_LOADBP)
 322         else if (!strcmp("loadbp", opstr))
 323                 op = FPGA_LOADBP;
 324 #endif
 325 #if defined(CONFIG_CMD_FPGA_LOADFS)
 326         else if (!strcmp("loadfs", opstr))
 327                 op = FPGA_LOADFS;
 328 #endif
 329 #if defined(CONFIG_CMD_FPGA_LOADMK)
 330         else if (!strcmp("loadmk", opstr))
 331                 op = FPGA_LOADMK;
 332 #endif
 333         else if (!strcmp("dump", opstr))
 334                 op = FPGA_DUMP;
 335
 336         if (op == FPGA_NONE)
 337                 printf("Unknown fpga operation \"%s\"\n", opstr);
 338
 339         return op;
 340 }
 341
 342 #if defined(CONFIG_CMD_FPGA_LOADFS)
 343 U_BOOT_CMD(fpga, 9, 1, do_fpga,
 344 #else
 345 U_BOOT_CMD(fpga, 6, 1, do_fpga,
 346 #endif
 347            "loadable FPGA image support",
 348            "[operation type] [device number] [image address] [image size]\n"
 349            "fpga operations:\n"
 350            "  dump\t[dev] [address] [size]\tLoad device to memory buffer\n"
 351            "  info\t[dev]\t\t\tlist known device information\n"
 352            "  load\t[dev] [address] [size]\tLoad device from memory buffer\n"
 353 #if defined(CONFIG_CMD_FPGA_LOADP)
 354            "  loadp\t[dev] [address] [size]\t"
 355            "Load device from memory buffer with partial bitstream\n"
 356 #endif
 357            "  loadb\t[dev] [address] [size]\t"
 358            "Load device from bitstream buffer (Xilinx only)\n"
 359 #if defined(CONFIG_CMD_FPGA_LOADBP)
 360            "  loadbp\t[dev] [address] [size]\t"
 361            "Load device from bitstream buffer with partial bitstream"
 362            "(Xilinx only)\n"
 363 #endif
 364 #if defined(CONFIG_CMD_FPGA_LOADFS)
 365            "Load device from filesystem (FAT by default) (Xilinx only)\n"
 366            "  loadfs [dev] [address] [image size] [blocksize] <interface>\n"
 367            "        [<dev[:part]>] <filename>\n"
 368 #endif
 369 #if defined(CONFIG_CMD_FPGA_LOADMK)
 370            "  loadmk [dev] [address]\tLoad device generated with mkimage"
 371 #if defined(CONFIG_FIT)
 372            "\n"
 373            "\tFor loadmk operating on FIT format uImage address must include\n"
 374            "\tsubimage unit name in the form of addr:<subimg_uname>"
 375 #endif
 376 #endif
 377 );