git.sur5r.net Git - u-boot/blob - cmd/mdio.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * (C) Copyright 2011 Freescale Semiconductor, Inc
   4  * Andy Fleming
   5  */
   6
   7 /*
   8  * MDIO Commands
   9  */
  10
  11 #include <common.h>
  12 #include <command.h>
  13 #include <miiphy.h>
  14 #include <phy.h>
  15
  16 static char last_op[2];
  17 static uint last_data;
  18 static uint last_addr_lo;
  19 static uint last_addr_hi;
  20 static uint last_devad_lo;
  21 static uint last_devad_hi;
  22 static uint last_reg_lo;
  23 static uint last_reg_hi;
  24
  25 static int extract_range(char *input, int *plo, int *phi)
  26 {
  27         char *end;
  28         *plo = simple_strtol(input, &end, 16);
  29         if (end == input)
  30                 return -1;
  31
  32         if ((*end == '-') && *(++end))
  33                 *phi = simple_strtol(end, NULL, 16);
  34         else if (*end == '\0')
  35                 *phi = *plo;
  36         else
  37                 return -1;
  38
  39         return 0;
  40 }
  41
  42 static int mdio_write_ranges(struct phy_device *phydev, struct mii_dev *bus,
  43                              int addrlo,
  44                              int addrhi, int devadlo, int devadhi,
  45                              int reglo, int reghi, unsigned short data,
  46                              int extended)
  47 {
  48         int addr, devad, reg;
  49         int err = 0;
  50
  51         for (addr = addrlo; addr <= addrhi; addr++) {
  52                 for (devad = devadlo; devad <= devadhi; devad++) {
  53                         for (reg = reglo; reg <= reghi; reg++) {
  54                                 if (!extended)
  55                                         err = bus->write(bus, addr, devad,
  56                                                          reg, data);
  57                                 else
  58                                         err = phydev->drv->writeext(phydev,
  59                                                         addr, devad, reg, data);
  60
  61                                 if (err)
  62                                         goto err_out;
  63                         }
  64                 }
  65         }
  66
  67 err_out:
  68         return err;
  69 }
  70
  71 static int mdio_read_ranges(struct phy_device *phydev, struct mii_dev *bus,
  72                             int addrlo,
  73                             int addrhi, int devadlo, int devadhi,
  74                             int reglo, int reghi, int extended)
  75 {
  76         int addr, devad, reg;
  77
  78         printf("Reading from bus %s\n", bus->name);
  79         for (addr = addrlo; addr <= addrhi; addr++) {
  80                 printf("PHY at address %x:\n", addr);
  81
  82                 for (devad = devadlo; devad <= devadhi; devad++) {
  83                         for (reg = reglo; reg <= reghi; reg++) {
  84                                 int val;
  85
  86                                 if (!extended)
  87                                         val = bus->read(bus, addr, devad, reg);
  88                                 else
  89                                         val = phydev->drv->readext(phydev, addr,
  90                                                 devad, reg);
  91
  92                                 if (val < 0) {
  93                                         printf("Error\n");
  94
  95                                         return val;
  96                                 }
  97
  98                                 if (devad >= 0)
  99                                         printf("%d.", devad);
 100
 101                                 printf("%d - 0x%x\n", reg, val & 0xffff);
 102                         }
 103                 }
 104         }
 105
 106         return 0;
 107 }
 108
 109 /* The register will be in the form [a[-b].]x[-y] */
 110 static int extract_reg_range(char *input, int *devadlo, int *devadhi,
 111                              int *reglo, int *reghi)
 112 {
 113         char *regstr;
 114
 115         /* use strrchr to find the last string after a '.' */
 116         regstr = strrchr(input, '.');
 117
 118         /* If it exists, extract the devad(s) */
 119         if (regstr) {
 120                 char devadstr[32];
 121
 122                 strncpy(devadstr, input, regstr - input);
 123                 devadstr[regstr - input] = '\0';
 124
 125                 if (extract_range(devadstr, devadlo, devadhi))
 126                         return -1;
 127
 128                 regstr++;
 129         } else {
 130                 /* Otherwise, we have no devad, and we just got regs */
 131                 *devadlo = *devadhi = MDIO_DEVAD_NONE;
 132
 133                 regstr = input;
 134         }
 135
 136         return extract_range(regstr, reglo, reghi);
 137 }
 138
 139 static int extract_phy_range(char *const argv[], int argc, struct mii_dev **bus,
 140                              struct phy_device **phydev,
 141                              int *addrlo, int *addrhi)
 142 {
 143         struct phy_device *dev = *phydev;
 144
 145         if ((argc < 1) || (argc > 2))
 146                 return -1;
 147
 148         /* If there are two arguments, it's busname addr */
 149         if (argc == 2) {
 150                 *bus = miiphy_get_dev_by_name(argv[0]);
 151
 152                 if (!*bus)
 153                         return -1;
 154
 155                 return extract_range(argv[1], addrlo, addrhi);
 156         }
 157
 158         /* It must be one argument, here */
 159
 160         /*
 161          * This argument can be one of two things:
 162          * 1) Ethernet device name
 163          * 2) Just an address (use the previously-used bus)
 164          *
 165          * We check all buses for a PHY which is connected to an ethernet
 166          * device by the given name.  If none are found, we call
 167          * extract_range() on the string, and see if it's an address range.
 168          */
 169         dev = mdio_phydev_for_ethname(argv[0]);
 170
 171         if (dev) {
 172                 *addrlo = *addrhi = dev->addr;
 173                 *bus = dev->bus;
 174
 175                 return 0;
 176         }
 177
 178         /* It's an address or nothing useful */
 179         return extract_range(argv[0], addrlo, addrhi);
 180 }
 181
 182 /* ---------------------------------------------------------------- */
 183 static int do_mdio(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 184 {
 185         char op[2];
 186         int addrlo, addrhi, reglo, reghi, devadlo, devadhi;
 187         unsigned short  data;
 188         int pos = argc - 1;
 189         struct mii_dev *bus;
 190         struct phy_device *phydev = NULL;
 191         int extended = 0;
 192
 193         if (argc < 2)
 194                 return CMD_RET_USAGE;
 195
 196         /*
 197          * We use the last specified parameters, unless new ones are
 198          * entered.
 199          */
 200         op[0] = argv[1][0];
 201         addrlo = last_addr_lo;
 202         addrhi = last_addr_hi;
 203         devadlo = last_devad_lo;
 204         devadhi = last_devad_hi;
 205         reglo  = last_reg_lo;
 206         reghi  = last_reg_hi;
 207         data   = last_data;
 208
 209         bus = mdio_get_current_dev();
 210
 211         if (flag & CMD_FLAG_REPEAT)
 212                 op[0] = last_op[0];
 213
 214         if (strlen(argv[1]) > 1) {
 215                 op[1] = argv[1][1];
 216                 if (op[1] == 'x') {
 217                         phydev = mdio_phydev_for_ethname(argv[2]);
 218
 219                         if (phydev) {
 220                                 addrlo = phydev->addr;
 221                                 addrhi = addrlo;
 222                                 bus = phydev->bus;
 223                                 extended = 1;
 224                         } else {
 225                                 return -1;
 226                         }
 227
 228                         if (!phydev->drv ||
 229                             (!phydev->drv->writeext && (op[0] == 'w')) ||
 230                             (!phydev->drv->readext && (op[0] == 'r'))) {
 231                                 puts("PHY does not have extended functions\n");
 232                                 return -1;
 233                         }
 234                 }
 235         }
 236
 237         switch (op[0]) {
 238         case 'w':
 239                 if (pos > 1)
 240                         data = simple_strtoul(argv[pos--], NULL, 16);
 241         case 'r':
 242                 if (pos > 1)
 243                         if (extract_reg_range(argv[pos--], &devadlo, &devadhi,
 244                                               &reglo, &reghi))
 245                                 return -1;
 246
 247         default:
 248                 if (pos > 1)
 249                         if (extract_phy_range(&argv[2], pos - 1, &bus,
 250                                               &phydev, &addrlo, &addrhi))
 251                                 return -1;
 252
 253                 break;
 254         }
 255
 256         if (op[0] == 'l') {
 257                 mdio_list_devices();
 258
 259                 return 0;
 260         }
 261
 262         /* Save the chosen bus */
 263         miiphy_set_current_dev(bus->name);
 264
 265         switch (op[0]) {
 266         case 'w':
 267                 mdio_write_ranges(phydev, bus, addrlo, addrhi, devadlo, devadhi,
 268                                   reglo, reghi, data, extended);
 269                 break;
 270
 271         case 'r':
 272                 mdio_read_ranges(phydev, bus, addrlo, addrhi, devadlo, devadhi,
 273                                  reglo, reghi, extended);
 274                 break;
 275         }
 276
 277         /*
 278          * Save the parameters for repeats.
 279          */
 280         last_op[0] = op[0];
 281         last_addr_lo = addrlo;
 282         last_addr_hi = addrhi;
 283         last_devad_lo = devadlo;
 284         last_devad_hi = devadhi;
 285         last_reg_lo  = reglo;
 286         last_reg_hi  = reghi;
 287         last_data    = data;
 288
 289         return 0;
 290 }
 291
 292 /***************************************************/
 293
 294 U_BOOT_CMD(
 295         mdio,   6,      1,      do_mdio,
 296         "MDIO utility commands",
 297         "list                   - List MDIO buses\n"
 298         "mdio read <phydev> [<devad>.]<reg> - "
 299                 "read PHY's register at <devad>.<reg>\n"
 300         "mdio write <phydev> [<devad>.]<reg> <data> - "
 301                 "write PHY's register at <devad>.<reg>\n"
 302         "mdio rx <phydev> [<devad>.]<reg> - "
 303                 "read PHY's extended register at <devad>.<reg>\n"
 304         "mdio wx <phydev> [<devad>.]<reg> <data> - "
 305                 "write PHY's extended register at <devad>.<reg>\n"
 306         "<phydev> may be:\n"
 307         "   <busname>  <addr>\n"
 308         "   <addr>\n"
 309         "   <eth name>\n"
 310         "<addr> <devad>, and <reg> may be ranges, e.g. 1-5.4-0x1f.\n"
 311 );