git.sur5r.net Git - u-boot/blob - cmd/mii.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * (C) Copyright 2001
   4  * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com
   5  */
   6
   7 /*
   8  * MII Utilities
   9  */
  10
  11 #include <common.h>
  12 #include <command.h>
  13 #include <miiphy.h>
  14
  15 typedef struct _MII_reg_desc_t {
  16         ushort regno;
  17         char * name;
  18 } MII_reg_desc_t;
  19
  20 static const MII_reg_desc_t reg_0_5_desc_tbl[] = {
  21         { MII_BMCR,      "PHY control register" },
  22         { MII_BMSR,      "PHY status register" },
  23         { MII_PHYSID1,   "PHY ID 1 register" },
  24         { MII_PHYSID2,   "PHY ID 2 register" },
  25         { MII_ADVERTISE, "Autonegotiation advertisement register" },
  26         { MII_LPA,       "Autonegotiation partner abilities register" },
  27 };
  28
  29 typedef struct _MII_field_desc_t {
  30         ushort hi;
  31         ushort lo;
  32         ushort mask;
  33         char * name;
  34 } MII_field_desc_t;
  35
  36 static const MII_field_desc_t reg_0_desc_tbl[] = {
  37         { 15, 15, 0x01, "reset"                        },
  38         { 14, 14, 0x01, "loopback"                     },
  39         { 13,  6, 0x81, "speed selection"              }, /* special */
  40         { 12, 12, 0x01, "A/N enable"                   },
  41         { 11, 11, 0x01, "power-down"                   },
  42         { 10, 10, 0x01, "isolate"                      },
  43         {  9,  9, 0x01, "restart A/N"                  },
  44         {  8,  8, 0x01, "duplex"                       }, /* special */
  45         {  7,  7, 0x01, "collision test enable"        },
  46         {  5,  0, 0x3f, "(reserved)"                   }
  47 };
  48
  49 static const MII_field_desc_t reg_1_desc_tbl[] = {
  50         { 15, 15, 0x01, "100BASE-T4 able"              },
  51         { 14, 14, 0x01, "100BASE-X  full duplex able"  },
  52         { 13, 13, 0x01, "100BASE-X  half duplex able"  },
  53         { 12, 12, 0x01, "10 Mbps    full duplex able"  },
  54         { 11, 11, 0x01, "10 Mbps    half duplex able"  },
  55         { 10, 10, 0x01, "100BASE-T2 full duplex able"  },
  56         {  9,  9, 0x01, "100BASE-T2 half duplex able"  },
  57         {  8,  8, 0x01, "extended status"              },
  58         {  7,  7, 0x01, "(reserved)"                   },
  59         {  6,  6, 0x01, "MF preamble suppression"      },
  60         {  5,  5, 0x01, "A/N complete"                 },
  61         {  4,  4, 0x01, "remote fault"                 },
  62         {  3,  3, 0x01, "A/N able"                     },
  63         {  2,  2, 0x01, "link status"                  },
  64         {  1,  1, 0x01, "jabber detect"                },
  65         {  0,  0, 0x01, "extended capabilities"        },
  66 };
  67
  68 static const MII_field_desc_t reg_2_desc_tbl[] = {
  69         { 15,  0, 0xffff, "OUI portion"                },
  70 };
  71
  72 static const MII_field_desc_t reg_3_desc_tbl[] = {
  73         { 15, 10, 0x3f, "OUI portion"                },
  74         {  9,  4, 0x3f, "manufacturer part number"   },
  75         {  3,  0, 0x0f, "manufacturer rev. number"   },
  76 };
  77
  78 static const MII_field_desc_t reg_4_desc_tbl[] = {
  79         { 15, 15, 0x01, "next page able"               },
  80         { 14, 14, 0x01, "(reserved)"                   },
  81         { 13, 13, 0x01, "remote fault"                 },
  82         { 12, 12, 0x01, "(reserved)"                   },
  83         { 11, 11, 0x01, "asymmetric pause"             },
  84         { 10, 10, 0x01, "pause enable"                 },
  85         {  9,  9, 0x01, "100BASE-T4 able"              },
  86         {  8,  8, 0x01, "100BASE-TX full duplex able"  },
  87         {  7,  7, 0x01, "100BASE-TX able"              },
  88         {  6,  6, 0x01, "10BASE-T   full duplex able"  },
  89         {  5,  5, 0x01, "10BASE-T   able"              },
  90         {  4,  0, 0x1f, "xxx to do"                    },
  91 };
  92
  93 static const MII_field_desc_t reg_5_desc_tbl[] = {
  94         { 15, 15, 0x01, "next page able"               },
  95         { 14, 14, 0x01, "acknowledge"                  },
  96         { 13, 13, 0x01, "remote fault"                 },
  97         { 12, 12, 0x01, "(reserved)"                   },
  98         { 11, 11, 0x01, "asymmetric pause able"        },
  99         { 10, 10, 0x01, "pause able"                   },
 100         {  9,  9, 0x01, "100BASE-T4 able"              },
 101         {  8,  8, 0x01, "100BASE-X full duplex able"   },
 102         {  7,  7, 0x01, "100BASE-TX able"              },
 103         {  6,  6, 0x01, "10BASE-T full duplex able"    },
 104         {  5,  5, 0x01, "10BASE-T able"                },
 105         {  4,  0, 0x1f, "xxx to do"                    },
 106 };
 107 typedef struct _MII_field_desc_and_len_t {
 108         const MII_field_desc_t *pdesc;
 109         ushort len;
 110 } MII_field_desc_and_len_t;
 111
 112 static const MII_field_desc_and_len_t desc_and_len_tbl[] = {
 113         { reg_0_desc_tbl, ARRAY_SIZE(reg_0_desc_tbl)   },
 114         { reg_1_desc_tbl, ARRAY_SIZE(reg_1_desc_tbl)   },
 115         { reg_2_desc_tbl, ARRAY_SIZE(reg_2_desc_tbl)   },
 116         { reg_3_desc_tbl, ARRAY_SIZE(reg_3_desc_tbl)   },
 117         { reg_4_desc_tbl, ARRAY_SIZE(reg_4_desc_tbl)   },
 118         { reg_5_desc_tbl, ARRAY_SIZE(reg_5_desc_tbl)   },
 119 };
 120
 121 static void dump_reg(
 122         ushort             regval,
 123         const MII_reg_desc_t *prd,
 124         const MII_field_desc_and_len_t *pdl);
 125
 126 static int special_field(
 127         ushort regno,
 128         const MII_field_desc_t *pdesc,
 129         ushort regval);
 130
 131 static void MII_dump_0_to_5(
 132         ushort regvals[6],
 133         uchar reglo,
 134         uchar reghi)
 135 {
 136         ulong i;
 137
 138         for (i = 0; i < 6; i++) {
 139                 if ((reglo <= i) && (i <= reghi))
 140                         dump_reg(regvals[i], &reg_0_5_desc_tbl[i],
 141                                 &desc_and_len_tbl[i]);
 142         }
 143 }
 144
 145 static void dump_reg(
 146         ushort             regval,
 147         const MII_reg_desc_t *prd,
 148         const MII_field_desc_and_len_t *pdl)
 149 {
 150         ulong i;
 151         ushort mask_in_place;
 152         const MII_field_desc_t *pdesc;
 153
 154         printf("%u.     (%04hx)                 -- %s --\n",
 155                 prd->regno, regval, prd->name);
 156
 157         for (i = 0; i < pdl->len; i++) {
 158                 pdesc = &pdl->pdesc[i];
 159
 160                 mask_in_place = pdesc->mask << pdesc->lo;
 161
 162                 printf("  (%04hx:%04x) %u.",
 163                        mask_in_place,
 164                        regval & mask_in_place,
 165                        prd->regno);
 166
 167                 if (special_field(prd->regno, pdesc, regval)) {
 168                 }
 169                 else {
 170                         if (pdesc->hi == pdesc->lo)
 171                                 printf("%2u   ", pdesc->lo);
 172                         else
 173                                 printf("%2u-%2u", pdesc->hi, pdesc->lo);
 174                         printf(" = %5u    %s",
 175                                 (regval & mask_in_place) >> pdesc->lo,
 176                                 pdesc->name);
 177                 }
 178                 printf("\n");
 179
 180         }
 181         printf("\n");
 182 }
 183
 184 /* Special fields:
 185 ** 0.6,13
 186 ** 0.8
 187 ** 2.15-0
 188 ** 3.15-0
 189 ** 4.4-0
 190 ** 5.4-0
 191 */
 192
 193 static int special_field(
 194         ushort regno,
 195         const MII_field_desc_t *pdesc,
 196         ushort regval)
 197 {
 198         if ((regno == MII_BMCR) && (pdesc->lo == 6)) {
 199                 ushort speed_bits = regval & (BMCR_SPEED1000 | BMCR_SPEED100);
 200                 printf("%2u,%2u =   b%u%u    speed selection = %s Mbps",
 201                         6, 13,
 202                         (regval >>  6) & 1,
 203                         (regval >> 13) & 1,
 204                         speed_bits == BMCR_SPEED1000 ? "1000" :
 205                         speed_bits == BMCR_SPEED100  ? "100" :
 206                         "10");
 207                 return 1;
 208         }
 209
 210         else if ((regno == MII_BMCR) && (pdesc->lo == 8)) {
 211                 printf("%2u    = %5u    duplex = %s",
 212                         pdesc->lo,
 213                         (regval >>  pdesc->lo) & 1,
 214                         ((regval >> pdesc->lo) & 1) ? "full" : "half");
 215                 return 1;
 216         }
 217
 218         else if ((regno == MII_ADVERTISE) && (pdesc->lo == 0)) {
 219                 ushort sel_bits = (regval >> pdesc->lo) & pdesc->mask;
 220                 printf("%2u-%2u = %5u    selector = %s",
 221                         pdesc->hi, pdesc->lo, sel_bits,
 222                         sel_bits == PHY_ANLPAR_PSB_802_3 ?
 223                                 "IEEE 802.3" :
 224                         sel_bits == PHY_ANLPAR_PSB_802_9 ?
 225                                 "IEEE 802.9 ISLAN-16T" :
 226                         "???");
 227                 return 1;
 228         }
 229
 230         else if ((regno == MII_LPA) && (pdesc->lo == 0)) {
 231                 ushort sel_bits = (regval >> pdesc->lo) & pdesc->mask;
 232                 printf("%2u-%2u =     %u    selector = %s",
 233                         pdesc->hi, pdesc->lo, sel_bits,
 234                         sel_bits == PHY_ANLPAR_PSB_802_3 ?
 235                                 "IEEE 802.3" :
 236                         sel_bits == PHY_ANLPAR_PSB_802_9 ?
 237                                 "IEEE 802.9 ISLAN-16T" :
 238                         "???");
 239                 return 1;
 240         }
 241
 242         return 0;
 243 }
 244
 245 static char last_op[2];
 246 static uint last_data;
 247 static uint last_addr_lo;
 248 static uint last_addr_hi;
 249 static uint last_reg_lo;
 250 static uint last_reg_hi;
 251 static uint last_mask;
 252
 253 static void extract_range(
 254         char * input,
 255         unsigned char * plo,
 256         unsigned char * phi)
 257 {
 258         char * end;
 259         *plo = simple_strtoul(input, &end, 16);
 260         if (*end == '-') {
 261                 end++;
 262                 *phi = simple_strtoul(end, NULL, 16);
 263         }
 264         else {
 265                 *phi = *plo;
 266         }
 267 }
 268
 269 /* ---------------------------------------------------------------- */
 270 static int do_mii(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 271 {
 272         char            op[2];
 273         unsigned char   addrlo, addrhi, reglo, reghi;
 274         unsigned char   addr, reg;
 275         unsigned short  data, mask;
 276         int             rcode = 0;
 277         const char      *devname;
 278
 279         if (argc < 2)
 280                 return CMD_RET_USAGE;
 281
 282 #if defined(CONFIG_MII_INIT)
 283         mii_init ();
 284 #endif
 285
 286         /*
 287          * We use the last specified parameters, unless new ones are
 288          * entered.
 289          */
 290         op[0] = last_op[0];
 291         op[1] = last_op[1];
 292         addrlo = last_addr_lo;
 293         addrhi = last_addr_hi;
 294         reglo  = last_reg_lo;
 295         reghi  = last_reg_hi;
 296         data   = last_data;
 297         mask   = last_mask;
 298
 299         if ((flag & CMD_FLAG_REPEAT) == 0) {
 300                 op[0] = argv[1][0];
 301                 if (strlen(argv[1]) > 1)
 302                         op[1] = argv[1][1];
 303                 else
 304                         op[1] = '\0';
 305
 306                 if (argc >= 3)
 307                         extract_range(argv[2], &addrlo, &addrhi);
 308                 if (argc >= 4)
 309                         extract_range(argv[3], &reglo, &reghi);
 310                 if (argc >= 5)
 311                         data = simple_strtoul(argv[4], NULL, 16);
 312                 if (argc >= 6)
 313                         mask = simple_strtoul(argv[5], NULL, 16);
 314         }
 315
 316         if (addrhi > 31) {
 317                 printf("Incorrect PHY address. Range should be 0-31\n");
 318                 return CMD_RET_USAGE;
 319         }
 320
 321         /* use current device */
 322         devname = miiphy_get_current_dev();
 323
 324         /*
 325          * check info/read/write.
 326          */
 327         if (op[0] == 'i') {
 328                 unsigned char j, start, end;
 329                 unsigned int oui;
 330                 unsigned char model;
 331                 unsigned char rev;
 332
 333                 /*
 334                  * Look for any and all PHYs.  Valid addresses are 0..31.
 335                  */
 336                 if (argc >= 3) {
 337                         start = addrlo; end = addrhi;
 338                 } else {
 339                         start = 0; end = 31;
 340                 }
 341
 342                 for (j = start; j <= end; j++) {
 343                         if (miiphy_info (devname, j, &oui, &model, &rev) == 0) {
 344                                 printf("PHY 0x%02X: "
 345                                         "OUI = 0x%04X, "
 346                                         "Model = 0x%02X, "
 347                                         "Rev = 0x%02X, "
 348                                         "%3dbase%s, %s\n",
 349                                         j, oui, model, rev,
 350                                         miiphy_speed (devname, j),
 351                                         miiphy_is_1000base_x (devname, j)
 352                                                 ? "X" : "T",
 353                                         (miiphy_duplex (devname, j) == FULL)
 354                                                 ? "FDX" : "HDX");
 355                         }
 356                 }
 357         } else if (op[0] == 'r') {
 358                 for (addr = addrlo; addr <= addrhi; addr++) {
 359                         for (reg = reglo; reg <= reghi; reg++) {
 360                                 data = 0xffff;
 361                                 if (miiphy_read (devname, addr, reg, &data) != 0) {
 362                                         printf(
 363                                         "Error reading from the PHY addr=%02x reg=%02x\n",
 364                                                 addr, reg);
 365                                         rcode = 1;
 366                                 } else {
 367                                         if ((addrlo != addrhi) || (reglo != reghi))
 368                                                 printf("addr=%02x reg=%02x data=",
 369                                                         (uint)addr, (uint)reg);
 370                                         printf("%04X\n", data & 0x0000FFFF);
 371                                 }
 372                         }
 373                         if ((addrlo != addrhi) && (reglo != reghi))
 374                                 printf("\n");
 375                 }
 376         } else if (op[0] == 'w') {
 377                 for (addr = addrlo; addr <= addrhi; addr++) {
 378                         for (reg = reglo; reg <= reghi; reg++) {
 379                                 if (miiphy_write (devname, addr, reg, data) != 0) {
 380                                         printf("Error writing to the PHY addr=%02x reg=%02x\n",
 381                                                 addr, reg);
 382                                         rcode = 1;
 383                                 }
 384                         }
 385                 }
 386         } else if (op[0] == 'm') {
 387                 for (addr = addrlo; addr <= addrhi; addr++) {
 388                         for (reg = reglo; reg <= reghi; reg++) {
 389                                 unsigned short val = 0;
 390                                 if (miiphy_read(devname, addr,
 391                                                 reg, &val)) {
 392                                         printf("Error reading from the PHY");
 393                                         printf(" addr=%02x", addr);
 394                                         printf(" reg=%02x\n", reg);
 395                                         rcode = 1;
 396                                 } else {
 397                                         val = (val & ~mask) | (data & mask);
 398                                         if (miiphy_write(devname, addr,
 399                                                          reg, val)) {
 400                                                 printf("Error writing to the PHY");
 401                                                 printf(" addr=%02x", addr);
 402                                                 printf(" reg=%02x\n", reg);
 403                                                 rcode = 1;
 404                                         }
 405                                 }
 406                         }
 407                 }
 408         } else if (strncmp(op, "du", 2) == 0) {
 409                 ushort regs[6];
 410                 int ok = 1;
 411                 if ((reglo > 5) || (reghi > 5)) {
 412                         printf(
 413                                 "The MII dump command only formats the "
 414                                 "standard MII registers, 0-5.\n");
 415                         return 1;
 416                 }
 417                 for (addr = addrlo; addr <= addrhi; addr++) {
 418                         for (reg = reglo; reg < reghi + 1; reg++) {
 419                                 if (miiphy_read(devname, addr, reg, &regs[reg]) != 0) {
 420                                         ok = 0;
 421                                         printf(
 422                                         "Error reading from the PHY addr=%02x reg=%02x\n",
 423                                                 addr, reg);
 424                                         rcode = 1;
 425                                 }
 426                         }
 427                         if (ok)
 428                                 MII_dump_0_to_5(regs, reglo, reghi);
 429                         printf("\n");
 430                 }
 431         } else if (strncmp(op, "de", 2) == 0) {
 432                 if (argc == 2)
 433                         miiphy_listdev ();
 434                 else
 435                         miiphy_set_current_dev (argv[2]);
 436         } else {
 437                 return CMD_RET_USAGE;
 438         }
 439
 440         /*
 441          * Save the parameters for repeats.
 442          */
 443         last_op[0] = op[0];
 444         last_op[1] = op[1];
 445         last_addr_lo = addrlo;
 446         last_addr_hi = addrhi;
 447         last_reg_lo  = reglo;
 448         last_reg_hi  = reghi;
 449         last_data    = data;
 450         last_mask    = mask;
 451
 452         return rcode;
 453 }
 454
 455 /***************************************************/
 456
 457 U_BOOT_CMD(
 458         mii, 6, 1, do_mii,
 459         "MII utility commands",
 460         "device                            - list available devices\n"
 461         "mii device <devname>                  - set current device\n"
 462         "mii info   <addr>                     - display MII PHY info\n"
 463         "mii read   <addr> <reg>               - read  MII PHY <addr> register <reg>\n"
 464         "mii write  <addr> <reg> <data>        - write MII PHY <addr> register <reg>\n"
 465         "mii modify <addr> <reg> <data> <mask> - modify MII PHY <addr> register <reg>\n"
 466         "                                        updating bits identified in <mask>\n"
 467         "mii dump   <addr> <reg>               - pretty-print <addr> <reg> (0-5 only)\n"
 468         "Addr and/or reg may be ranges, e.g. 2-7."
 469 );