git.sur5r.net Git - u-boot/blob - drivers/Makefile

   1 #
   2 # SPDX-License-Identifier:      GPL-2.0+
   3 #
   4
   5 obj-$(CONFIG_$(SPL_TPL_)DM)     += core/
   6 obj-$(CONFIG_$(SPL_)CLK)        += clk/
   7 obj-$(CONFIG_$(SPL_)LED)        += led/
   8 obj-$(CONFIG_$(SPL_)PINCTRL)    += pinctrl/
   9 obj-$(CONFIG_$(SPL_)RAM)        += ram/
  10
  11 ifdef CONFIG_SPL_BUILD
  12
  13 obj-$(CONFIG_SPL_CPU_SUPPORT) += cpu/
  14 obj-$(CONFIG_SPL_CRYPTO_SUPPORT) += crypto/
  15 obj-$(CONFIG_SPL_I2C_SUPPORT) += i2c/
  16 obj-$(CONFIG_SPL_GPIO_SUPPORT) += gpio/
  17 obj-$(CONFIG_SPL_MMC_SUPPORT) += mmc/
  18 obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
  19 obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/
  20 obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/
  21 obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/
  22 obj-$(CONFIG_SPL_SERIAL_SUPPORT) += serial/
  23 obj-$(CONFIG_SPL_SPI_SUPPORT) += spi/
  24 obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
  25 obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
  26 obj-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += misc/ sysreset/ firmware/
  27 obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/
  28 obj-$(CONFIG_SPL_NAND_SUPPORT) += mtd/nand/
  29 obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/
  30 obj-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += mtd/spi/
  31 obj-$(CONFIG_SPL_UBI) += mtd/ubispl/
  32 obj-$(CONFIG_SPL_DMA_SUPPORT) += dma/
  33 obj-$(CONFIG_SPL_ETH_SUPPORT) += net/
  34 obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/
  35 obj-$(CONFIG_SPL_USBETH_SUPPORT) += net/phy/
  36 obj-$(CONFIG_SPL_PCI_SUPPORT) += pci/
  37 obj-$(CONFIG_SPL_PCH_SUPPORT) += pch/
  38 obj-$(CONFIG_SPL_RTC_SUPPORT) += rtc/
  39 obj-$(CONFIG_SPL_TIMER_SUPPORT) += timer/
  40 obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/
  41 obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/
  42 obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/udc/
  43 obj-$(CONFIG_SPL_DFU_SUPPORT) += dfu/
  44 obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
  45 obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
  46 obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
  47 obj-$(CONFIG_SPL_SATA_SUPPORT) += block/
  48 obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += block/
  49 obj-$(CONFIG_SPL_MMC_SUPPORT) += block/
  50 endif
  51
  52 ifdef CONFIG_TPL_BUILD
  53
  54 obj-$(CONFIG_TPL_I2C_SUPPORT) += i2c/
  55 obj-$(CONFIG_TPL_DRIVERS_MISC_SUPPORT) += misc/ sysreset/ firmware/
  56 obj-$(CONFIG_TPL_MMC_SUPPORT) += mmc/
  57 obj-$(CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
  58 obj-$(CONFIG_TPL_NAND_SUPPORT) += mtd/nand/
  59 obj-$(CONFIG_TPL_SERIAL_SUPPORT) += serial/
  60 obj-$(CONFIG_TPL_SPI_FLASH_SUPPORT) += mtd/spi/
  61 obj-$(CONFIG_TPL_SPI_SUPPORT) += spi/
  62
  63 endif
  64
  65 ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
  66
  67 obj-y += adc/
  68 obj-$(CONFIG_DM_DEMO) += demo/
  69 obj-$(CONFIG_BIOSEMU) += bios_emulator/
  70 obj-y += block/
  71 obj-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount/
  72 obj-$(CONFIG_CPU) += cpu/
  73 obj-y += crypto/
  74 obj-y += firmware/
  75 obj-$(CONFIG_FPGA) += fpga/
  76 obj-y += hwmon/
  77 obj-y += misc/
  78 obj-y += pcmcia/
  79 obj-y += dfu/
  80 obj-$(CONFIG_X86) += pch/
  81 obj-y += phy/marvell/
  82 obj-y += rtc/
  83 obj-y += sound/
  84 obj-y += spmi/
  85 obj-y += sysreset/
  86 obj-y += timer/
  87 obj-y += tpm/
  88 obj-y += twserial/
  89 obj-y += video/
  90 obj-y += watchdog/
  91 obj-$(CONFIG_QE) += qe/
  92 obj-$(CONFIG_U_QE) += qe/
  93 obj-y += mailbox/
  94 obj-y += memory/
  95 obj-y += pwm/
  96 obj-y += reset/
  97 obj-y += input/
  98 # SOC specific infrastructure drivers.
  99 obj-y += soc/
 100 obj-$(CONFIG_REMOTEPROC) += remoteproc/
 101 obj-y += thermal/
 102
 103 obj-$(CONFIG_MACH_PIC32) += ddr/microchip/
 104 endif