git.sur5r.net Git - u-boot/blob - drivers/mmc/mmc.c

   1 /*
   2  * Copyright 2008, Freescale Semiconductor, Inc
   3  * Andy Fleming
   4  *
   5  * Based vaguely on the Linux code
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #include <config.h>
  11 #include <common.h>
  12 #include <command.h>
  13 #include <dm.h>
  14 #include <dm/device-internal.h>
  15 #include <errno.h>
  16 #include <mmc.h>
  17 #include <part.h>
  18 #include <power/regulator.h>
  19 #include <malloc.h>
  20 #include <memalign.h>
  21 #include <linux/list.h>
  22 #include <div64.h>
  23 #include "mmc_private.h"
  24
  25 static int mmc_set_signal_voltage(struct mmc *mmc, uint signal_voltage);
  26 static int mmc_power_cycle(struct mmc *mmc);
  27 static int mmc_select_mode_and_width(struct mmc *mmc, uint card_caps);
  28
  29 #if CONFIG_IS_ENABLED(MMC_TINY)
  30 static struct mmc mmc_static;
  31 struct mmc *find_mmc_device(int dev_num)
  32 {
  33         return &mmc_static;
  34 }
  35
  36 void mmc_do_preinit(void)
  37 {
  38         struct mmc *m = &mmc_static;
  39 #ifdef CONFIG_FSL_ESDHC_ADAPTER_IDENT
  40         mmc_set_preinit(m, 1);
  41 #endif
  42         if (m->preinit)
  43                 mmc_start_init(m);
  44 }
  45
  46 struct blk_desc *mmc_get_blk_desc(struct mmc *mmc)
  47 {
  48         return &mmc->block_dev;
  49 }
  50 #endif
  51
  52 #if !CONFIG_IS_ENABLED(DM_MMC)
  53
  54 #if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)
  55 static int mmc_wait_dat0(struct mmc *mmc, int state, int timeout)
  56 {
  57         return -ENOSYS;
  58 }
  59 #endif
  60
  61 __weak int board_mmc_getwp(struct mmc *mmc)
  62 {
  63         return -1;
  64 }
  65
  66 int mmc_getwp(struct mmc *mmc)
  67 {
  68         int wp;
  69
  70         wp = board_mmc_getwp(mmc);
  71
  72         if (wp < 0) {
  73                 if (mmc->cfg->ops->getwp)
  74                         wp = mmc->cfg->ops->getwp(mmc);
  75                 else
  76                         wp = 0;
  77         }
  78
  79         return wp;
  80 }
  81
  82 __weak int board_mmc_getcd(struct mmc *mmc)
  83 {
  84         return -1;
  85 }
  86 #endif
  87
  88 #ifdef CONFIG_MMC_TRACE
  89 void mmmc_trace_before_send(struct mmc *mmc, struct mmc_cmd *cmd)
  90 {
  91         printf("CMD_SEND:%d\n", cmd->cmdidx);
  92         printf("\t\tARG\t\t\t 0x%08X\n", cmd->cmdarg);
  93 }
  94
  95 void mmmc_trace_after_send(struct mmc *mmc, struct mmc_cmd *cmd, int ret)
  96 {
  97         int i;
  98         u8 *ptr;
  99
 100         if (ret) {
 101                 printf("\t\tRET\t\t\t %d\n", ret);
 102         } else {
 103                 switch (cmd->resp_type) {
 104                 case MMC_RSP_NONE:
 105                         printf("\t\tMMC_RSP_NONE\n");
 106                         break;
 107                 case MMC_RSP_R1:
 108                         printf("\t\tMMC_RSP_R1,5,6,7 \t 0x%08X \n",
 109                                 cmd->response[0]);
 110                         break;
 111                 case MMC_RSP_R1b:
 112                         printf("\t\tMMC_RSP_R1b\t\t 0x%08X \n",
 113                                 cmd->response[0]);
 114                         break;
 115                 case MMC_RSP_R2:
 116                         printf("\t\tMMC_RSP_R2\t\t 0x%08X \n",
 117                                 cmd->response[0]);
 118                         printf("\t\t          \t\t 0x%08X \n",
 119                                 cmd->response[1]);
 120                         printf("\t\t          \t\t 0x%08X \n",
 121                                 cmd->response[2]);
 122                         printf("\t\t          \t\t 0x%08X \n",
 123                                 cmd->response[3]);
 124                         printf("\n");
 125                         printf("\t\t\t\t\tDUMPING DATA\n");
 126                         for (i = 0; i < 4; i++) {
 127                                 int j;
 128                                 printf("\t\t\t\t\t%03d - ", i*4);
 129                                 ptr = (u8 *)&cmd->response[i];
 130                                 ptr += 3;
 131                                 for (j = 0; j < 4; j++)
 132                                         printf("%02X ", *ptr--);
 133                                 printf("\n");
 134                         }
 135                         break;
 136                 case MMC_RSP_R3:
 137                         printf("\t\tMMC_RSP_R3,4\t\t 0x%08X \n",
 138                                 cmd->response[0]);
 139                         break;
 140                 default:
 141                         printf("\t\tERROR MMC rsp not supported\n");
 142                         break;
 143                 }
 144         }
 145 }
 146
 147 void mmc_trace_state(struct mmc *mmc, struct mmc_cmd *cmd)
 148 {
 149         int status;
 150
 151         status = (cmd->response[0] & MMC_STATUS_CURR_STATE) >> 9;
 152         printf("CURR STATE:%d\n", status);
 153 }
 154 #endif
 155
 156 #if CONFIG_IS_ENABLED(MMC_VERBOSE) || defined(DEBUG)
 157 const char *mmc_mode_name(enum bus_mode mode)
 158 {
 159         static const char *const names[] = {
 160               [MMC_LEGACY]      = "MMC legacy",
 161               [SD_LEGACY]       = "SD Legacy",
 162               [MMC_HS]          = "MMC High Speed (26MHz)",
 163               [SD_HS]           = "SD High Speed (50MHz)",
 164               [UHS_SDR12]       = "UHS SDR12 (25MHz)",
 165               [UHS_SDR25]       = "UHS SDR25 (50MHz)",
 166               [UHS_SDR50]       = "UHS SDR50 (100MHz)",
 167               [UHS_SDR104]      = "UHS SDR104 (208MHz)",
 168               [UHS_DDR50]       = "UHS DDR50 (50MHz)",
 169               [MMC_HS_52]       = "MMC High Speed (52MHz)",
 170               [MMC_DDR_52]      = "MMC DDR52 (52MHz)",
 171               [MMC_HS_200]      = "HS200 (200MHz)",
 172         };
 173
 174         if (mode >= MMC_MODES_END)
 175                 return "Unknown mode";
 176         else
 177                 return names[mode];
 178 }
 179 #endif
 180
 181 static uint mmc_mode2freq(struct mmc *mmc, enum bus_mode mode)
 182 {
 183         static const int freqs[] = {
 184               [SD_LEGACY]       = 25000000,
 185               [MMC_HS]          = 26000000,
 186               [SD_HS]           = 50000000,
 187 #if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)
 188               [UHS_SDR12]       = 25000000,
 189               [UHS_SDR25]       = 50000000,
 190               [UHS_SDR50]       = 100000000,
 191               [UHS_DDR50]       = 50000000,
 192 #ifdef MMC_SUPPORTS_TUNING
 193               [UHS_SDR104]      = 208000000,
 194 #endif
 195 #endif
 196               [MMC_HS_52]       = 52000000,
 197               [MMC_DDR_52]      = 52000000,
 198 #if CONFIG_IS_ENABLED(MMC_HS200_SUPPORT)
 199               [MMC_HS_200]      = 200000000,
 200 #endif
 201         };
 202
 203         if (mode == MMC_LEGACY)
 204                 return mmc->legacy_speed;
 205         else if (mode >= MMC_MODES_END)
 206                 return 0;
 207         else
 208                 return freqs[mode];
 209 }
 210
 211 static int mmc_select_mode(struct mmc *mmc, enum bus_mode mode)
 212 {
 213         mmc->selected_mode = mode;
 214         mmc->tran_speed = mmc_mode2freq(mmc, mode);
 215         mmc->ddr_mode = mmc_is_mode_ddr(mode);
 216         pr_debug("selecting mode %s (freq : %d MHz)\n", mmc_mode_name(mode),
 217                  mmc->tran_speed / 1000000);
 218         return 0;
 219 }
 220
 221 #if !CONFIG_IS_ENABLED(DM_MMC)
 222 int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
 223 {
 224         int ret;
 225
 226         mmmc_trace_before_send(mmc, cmd);
 227         ret = mmc->cfg->ops->send_cmd(mmc, cmd, data);
 228         mmmc_trace_after_send(mmc, cmd, ret);
 229
 230         return ret;
 231 }
 232 #endif
 233
 234 int mmc_send_status(struct mmc *mmc, int timeout)
 235 {
 236         struct mmc_cmd cmd;
 237         int err, retries = 5;
 238
 239         cmd.cmdidx = MMC_CMD_SEND_STATUS;
 240         cmd.resp_type = MMC_RSP_R1;
 241         if (!mmc_host_is_spi(mmc))
 242                 cmd.cmdarg = mmc->rca << 16;
 243
 244         while (1) {
 245                 err = mmc_send_cmd(mmc, &cmd, NULL);
 246                 if (!err) {
 247                         if ((cmd.response[0] & MMC_STATUS_RDY_FOR_DATA) &&
 248                             (cmd.response[0] & MMC_STATUS_CURR_STATE) !=
 249                              MMC_STATE_PRG)
 250                                 break;
 251
 252                         if (cmd.response[0] & MMC_STATUS_MASK) {
 253 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
 254                                 pr_err("Status Error: 0x%08X\n",
 255                                        cmd.response[0]);
 256 #endif
 257                                 return -ECOMM;
 258                         }
 259                 } else if (--retries < 0)
 260                         return err;
 261
 262                 if (timeout-- <= 0)
 263                         break;
 264
 265                 udelay(1000);
 266         }
 267
 268         mmc_trace_state(mmc, &cmd);
 269         if (timeout <= 0) {
 270 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
 271                 pr_err("Timeout waiting card ready\n");
 272 #endif
 273                 return -ETIMEDOUT;
 274         }
 275
 276         return 0;
 277 }
 278
 279 int mmc_set_blocklen(struct mmc *mmc, int len)
 280 {
 281         struct mmc_cmd cmd;
 282         int err;
 283
 284         if (mmc->ddr_mode)
 285                 return 0;
 286
 287         cmd.cmdidx = MMC_CMD_SET_BLOCKLEN;
 288         cmd.resp_type = MMC_RSP_R1;
 289         cmd.cmdarg = len;
 290
 291         err = mmc_send_cmd(mmc, &cmd, NULL);
 292
 293 #ifdef CONFIG_MMC_QUIRKS
 294         if (err && (mmc->quirks & MMC_QUIRK_RETRY_SET_BLOCKLEN)) {
 295                 int retries = 4;
 296                 /*
 297                  * It has been seen that SET_BLOCKLEN may fail on the first
 298                  * attempt, let's try a few more time
 299                  */
 300                 do {
 301                         err = mmc_send_cmd(mmc, &cmd, NULL);
 302                         if (!err)
 303                                 break;
 304                 } while (retries--);
 305         }
 306 #endif
 307
 308         return err;
 309 }
 310
 311 #ifdef MMC_SUPPORTS_TUNING
 312 static const u8 tuning_blk_pattern_4bit[] = {
 313         0xff, 0x0f, 0xff, 0x00, 0xff, 0xcc, 0xc3, 0xcc,
 314         0xc3, 0x3c, 0xcc, 0xff, 0xfe, 0xff, 0xfe, 0xef,
 315         0xff, 0xdf, 0xff, 0xdd, 0xff, 0xfb, 0xff, 0xfb,
 316         0xbf, 0xff, 0x7f, 0xff, 0x77, 0xf7, 0xbd, 0xef,
 317         0xff, 0xf0, 0xff, 0xf0, 0x0f, 0xfc, 0xcc, 0x3c,
 318         0xcc, 0x33, 0xcc, 0xcf, 0xff, 0xef, 0xff, 0xee,
 319         0xff, 0xfd, 0xff, 0xfd, 0xdf, 0xff, 0xbf, 0xff,
 320         0xbb, 0xff, 0xf7, 0xff, 0xf7, 0x7f, 0x7b, 0xde,
 321 };
 322
 323 static const u8 tuning_blk_pattern_8bit[] = {
 324         0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00, 0x00,
 325         0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc, 0xcc,
 326         0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff, 0xff,
 327         0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee, 0xff,
 328         0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd, 0xdd,
 329         0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff, 0xbb,
 330         0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff, 0xff,
 331         0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee, 0xff,
 332         0xff, 0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00,
 333         0x00, 0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc,
 334         0xcc, 0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff,
 335         0xff, 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee,
 336         0xff, 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd,
 337         0xdd, 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff,
 338         0xbb, 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff,
 339         0xff, 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee,
 340 };
 341
 342 int mmc_send_tuning(struct mmc *mmc, u32 opcode, int *cmd_error)
 343 {
 344         struct mmc_cmd cmd;
 345         struct mmc_data data;
 346         const u8 *tuning_block_pattern;
 347         int size, err;
 348
 349         if (mmc->bus_width == 8) {
 350                 tuning_block_pattern = tuning_blk_pattern_8bit;
 351                 size = sizeof(tuning_blk_pattern_8bit);
 352         } else if (mmc->bus_width == 4) {
 353                 tuning_block_pattern = tuning_blk_pattern_4bit;
 354                 size = sizeof(tuning_blk_pattern_4bit);
 355         } else {
 356                 return -EINVAL;
 357         }
 358
 359         ALLOC_CACHE_ALIGN_BUFFER(u8, data_buf, size);
 360
 361         cmd.cmdidx = opcode;
 362         cmd.cmdarg = 0;
 363         cmd.resp_type = MMC_RSP_R1;
 364
 365         data.dest = (void *)data_buf;
 366         data.blocks = 1;
 367         data.blocksize = size;
 368         data.flags = MMC_DATA_READ;
 369
 370         err = mmc_send_cmd(mmc, &cmd, &data);
 371         if (err)
 372                 return err;
 373
 374         if (memcmp(data_buf, tuning_block_pattern, size))
 375                 return -EIO;
 376
 377         return 0;
 378 }
 379 #endif
 380
 381 static int mmc_read_blocks(struct mmc *mmc, void *dst, lbaint_t start,
 382                            lbaint_t blkcnt)
 383 {
 384         struct mmc_cmd cmd;
 385         struct mmc_data data;
 386
 387         if (blkcnt > 1)
 388                 cmd.cmdidx = MMC_CMD_READ_MULTIPLE_BLOCK;
 389         else
 390                 cmd.cmdidx = MMC_CMD_READ_SINGLE_BLOCK;
 391
 392         if (mmc->high_capacity)
 393                 cmd.cmdarg = start;
 394         else
 395                 cmd.cmdarg = start * mmc->read_bl_len;
 396
 397         cmd.resp_type = MMC_RSP_R1;
 398
 399         data.dest = dst;
 400         data.blocks = blkcnt;
 401         data.blocksize = mmc->read_bl_len;
 402         data.flags = MMC_DATA_READ;
 403
 404         if (mmc_send_cmd(mmc, &cmd, &data))
 405                 return 0;
 406
 407         if (blkcnt > 1) {
 408                 cmd.cmdidx = MMC_CMD_STOP_TRANSMISSION;
 409                 cmd.cmdarg = 0;
 410                 cmd.resp_type = MMC_RSP_R1b;
 411                 if (mmc_send_cmd(mmc, &cmd, NULL)) {
 412 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
 413                         pr_err("mmc fail to send stop cmd\n");
 414 #endif
 415                         return 0;
 416                 }
 417         }
 418
 419         return blkcnt;
 420 }
 421
 422 #if CONFIG_IS_ENABLED(BLK)
 423 ulong mmc_bread(struct udevice *dev, lbaint_t start, lbaint_t blkcnt, void *dst)
 424 #else
 425 ulong mmc_bread(struct blk_desc *block_dev, lbaint_t start, lbaint_t blkcnt,
 426                 void *dst)
 427 #endif
 428 {
 429 #if CONFIG_IS_ENABLED(BLK)
 430         struct blk_desc *block_dev = dev_get_uclass_platdata(dev);
 431 #endif
 432         int dev_num = block_dev->devnum;
 433         int err;
 434         lbaint_t cur, blocks_todo = blkcnt;
 435
 436         if (blkcnt == 0)
 437                 return 0;
 438
 439         struct mmc *mmc = find_mmc_device(dev_num);
 440         if (!mmc)
 441                 return 0;
 442
 443         if (CONFIG_IS_ENABLED(MMC_TINY))
 444                 err = mmc_switch_part(mmc, block_dev->hwpart);
 445         else
 446                 err = blk_dselect_hwpart(block_dev, block_dev->hwpart);
 447
 448         if (err < 0)
 449                 return 0;
 450
 451         if ((start + blkcnt) > block_dev->lba) {
 452 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
 453                 pr_err("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n",
 454                        start + blkcnt, block_dev->lba);
 455 #endif
 456                 return 0;
 457         }
 458
 459         if (mmc_set_blocklen(mmc, mmc->read_bl_len)) {
 460                 pr_debug("%s: Failed to set blocklen\n", __func__);
 461                 return 0;
 462         }
 463
 464         do {
 465                 cur = (blocks_todo > mmc->cfg->b_max) ?
 466                         mmc->cfg->b_max : blocks_todo;
 467                 if (mmc_read_blocks(mmc, dst, start, cur) != cur) {
 468                         pr_debug("%s: Failed to read blocks\n", __func__);
 469                         return 0;
 470                 }
 471                 blocks_todo -= cur;
 472                 start += cur;
 473                 dst += cur * mmc->read_bl_len;
 474         } while (blocks_todo > 0);
 475
 476         return blkcnt;
 477 }
 478
 479 static int mmc_go_idle(struct mmc *mmc)
 480 {
 481         struct mmc_cmd cmd;
 482         int err;
 483
 484         udelay(1000);
 485
 486         cmd.cmdidx = MMC_CMD_GO_IDLE_STATE;
 487         cmd.cmdarg = 0;
 488         cmd.resp_type = MMC_RSP_NONE;
 489
 490         err = mmc_send_cmd(mmc, &cmd, NULL);
 491
 492         if (err)
 493                 return err;
 494
 495         udelay(2000);
 496
 497         return 0;
 498 }
 499
 500 #if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)
 501 static int mmc_switch_voltage(struct mmc *mmc, int signal_voltage)
 502 {
 503         struct mmc_cmd cmd;
 504         int err = 0;
 505
 506         /*
 507          * Send CMD11 only if the request is to switch the card to
 508          * 1.8V signalling.
 509          */
 510         if (signal_voltage == MMC_SIGNAL_VOLTAGE_330)
 511                 return mmc_set_signal_voltage(mmc, signal_voltage);
 512
 513         cmd.cmdidx = SD_CMD_SWITCH_UHS18V;
 514         cmd.cmdarg = 0;
 515         cmd.resp_type = MMC_RSP_R1;
 516
 517         err = mmc_send_cmd(mmc, &cmd, NULL);
 518         if (err)
 519                 return err;
 520
 521         if (!mmc_host_is_spi(mmc) && (cmd.response[0] & MMC_STATUS_ERROR))
 522                 return -EIO;
 523
 524         /*
 525          * The card should drive cmd and dat[0:3] low immediately
 526          * after the response of cmd11, but wait 100 us to be sure
 527          */
 528         err = mmc_wait_dat0(mmc, 0, 100);
 529         if (err == -ENOSYS)
 530                 udelay(100);
 531         else if (err)
 532                 return -ETIMEDOUT;
 533
 534         /*
 535          * During a signal voltage level switch, the clock must be gated
 536          * for 5 ms according to the SD spec
 537          */
 538         mmc_set_clock(mmc, mmc->clock, true);
 539
 540         err = mmc_set_signal_voltage(mmc, signal_voltage);
 541         if (err)
 542                 return err;
 543
 544         /* Keep clock gated for at least 10 ms, though spec only says 5 ms */
 545         mdelay(10);
 546         mmc_set_clock(mmc, mmc->clock, false);
 547
 548         /*
 549          * Failure to switch is indicated by the card holding
 550          * dat[0:3] low. Wait for at least 1 ms according to spec
 551          */
 552         err = mmc_wait_dat0(mmc, 1, 1000);
 553         if (err == -ENOSYS)
 554                 udelay(1000);
 555         else if (err)
 556                 return -ETIMEDOUT;
 557
 558         return 0;
 559 }
 560 #endif
 561
 562 static int sd_send_op_cond(struct mmc *mmc, bool uhs_en)
 563 {
 564         int timeout = 1000;
 565         int err;
 566         struct mmc_cmd cmd;
 567
 568         while (1) {
 569                 cmd.cmdidx = MMC_CMD_APP_CMD;
 570                 cmd.resp_type = MMC_RSP_R1;
 571                 cmd.cmdarg = 0;
 572
 573                 err = mmc_send_cmd(mmc, &cmd, NULL);
 574
 575                 if (err)
 576                         return err;
 577
 578                 cmd.cmdidx = SD_CMD_APP_SEND_OP_COND;
 579                 cmd.resp_type = MMC_RSP_R3;
 580
 581                 /*
 582                  * Most cards do not answer if some reserved bits
 583                  * in the ocr are set. However, Some controller
 584                  * can set bit 7 (reserved for low voltages), but
 585                  * how to manage low voltages SD card is not yet
 586                  * specified.
 587                  */
 588                 cmd.cmdarg = mmc_host_is_spi(mmc) ? 0 :
 589                         (mmc->cfg->voltages & 0xff8000);
 590
 591                 if (mmc->version == SD_VERSION_2)
 592                         cmd.cmdarg |= OCR_HCS;
 593
 594                 if (uhs_en)
 595                         cmd.cmdarg |= OCR_S18R;
 596
 597                 err = mmc_send_cmd(mmc, &cmd, NULL);
 598
 599                 if (err)
 600                         return err;
 601
 602                 if (cmd.response[0] & OCR_BUSY)
 603                         break;
 604
 605                 if (timeout-- <= 0)
 606                         return -EOPNOTSUPP;
 607
 608                 udelay(1000);
 609         }
 610
 611         if (mmc->version != SD_VERSION_2)
 612                 mmc->version = SD_VERSION_1_0;
 613
 614         if (mmc_host_is_spi(mmc)) { /* read OCR for spi */
 615                 cmd.cmdidx = MMC_CMD_SPI_READ_OCR;
 616                 cmd.resp_type = MMC_RSP_R3;
 617                 cmd.cmdarg = 0;
 618
 619                 err = mmc_send_cmd(mmc, &cmd, NULL);
 620
 621                 if (err)
 622                         return err;
 623         }
 624
 625         mmc->ocr = cmd.response[0];
 626
 627 #if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)
 628         if (uhs_en && !(mmc_host_is_spi(mmc)) && (cmd.response[0] & 0x41000000)
 629             == 0x41000000) {
 630                 err = mmc_switch_voltage(mmc, MMC_SIGNAL_VOLTAGE_180);
 631                 if (err)
 632                         return err;
 633         }
 634 #endif
 635
 636         mmc->high_capacity = ((mmc->ocr & OCR_HCS) == OCR_HCS);
 637         mmc->rca = 0;
 638
 639         return 0;
 640 }
 641
 642 static int mmc_send_op_cond_iter(struct mmc *mmc, int use_arg)
 643 {
 644         struct mmc_cmd cmd;
 645         int err;
 646
 647         cmd.cmdidx = MMC_CMD_SEND_OP_COND;
 648         cmd.resp_type = MMC_RSP_R3;
 649         cmd.cmdarg = 0;
 650         if (use_arg && !mmc_host_is_spi(mmc))
 651                 cmd.cmdarg = OCR_HCS |
 652                         (mmc->cfg->voltages &
 653                         (mmc->ocr & OCR_VOLTAGE_MASK)) |
 654                         (mmc->ocr & OCR_ACCESS_MODE);
 655
 656         err = mmc_send_cmd(mmc, &cmd, NULL);
 657         if (err)
 658                 return err;
 659         mmc->ocr = cmd.response[0];
 660         return 0;
 661 }
 662
 663 static int mmc_send_op_cond(struct mmc *mmc)
 664 {
 665         int err, i;
 666
 667         /* Some cards seem to need this */
 668         mmc_go_idle(mmc);
 669
 670         /* Asking to the card its capabilities */
 671         for (i = 0; i < 2; i++) {
 672                 err = mmc_send_op_cond_iter(mmc, i != 0);
 673                 if (err)
 674                         return err;
 675
 676                 /* exit if not busy (flag seems to be inverted) */
 677                 if (mmc->ocr & OCR_BUSY)
 678                         break;
 679         }
 680         mmc->op_cond_pending = 1;
 681         return 0;
 682 }
 683
 684 static int mmc_complete_op_cond(struct mmc *mmc)
 685 {
 686         struct mmc_cmd cmd;
 687         int timeout = 1000;
 688         uint start;
 689         int err;
 690
 691         mmc->op_cond_pending = 0;
 692         if (!(mmc->ocr & OCR_BUSY)) {
 693                 /* Some cards seem to need this */
 694                 mmc_go_idle(mmc);
 695
 696                 start = get_timer(0);
 697                 while (1) {
 698                         err = mmc_send_op_cond_iter(mmc, 1);
 699                         if (err)
 700                                 return err;
 701                         if (mmc->ocr & OCR_BUSY)
 702                                 break;
 703                         if (get_timer(start) > timeout)
 704                                 return -EOPNOTSUPP;
 705                         udelay(100);
 706                 }
 707         }
 708
 709         if (mmc_host_is_spi(mmc)) { /* read OCR for spi */
 710                 cmd.cmdidx = MMC_CMD_SPI_READ_OCR;
 711                 cmd.resp_type = MMC_RSP_R3;
 712                 cmd.cmdarg = 0;
 713
 714                 err = mmc_send_cmd(mmc, &cmd, NULL);
 715
 716                 if (err)
 717                         return err;
 718
 719                 mmc->ocr = cmd.response[0];
 720         }
 721
 722         mmc->version = MMC_VERSION_UNKNOWN;
 723
 724         mmc->high_capacity = ((mmc->ocr & OCR_HCS) == OCR_HCS);
 725         mmc->rca = 1;
 726
 727         return 0;
 728 }
 729
 730
 731 static int mmc_send_ext_csd(struct mmc *mmc, u8 *ext_csd)
 732 {
 733         struct mmc_cmd cmd;
 734         struct mmc_data data;
 735         int err;
 736
 737         /* Get the Card Status Register */
 738         cmd.cmdidx = MMC_CMD_SEND_EXT_CSD;
 739         cmd.resp_type = MMC_RSP_R1;
 740         cmd.cmdarg = 0;
 741
 742         data.dest = (char *)ext_csd;
 743         data.blocks = 1;
 744         data.blocksize = MMC_MAX_BLOCK_LEN;
 745         data.flags = MMC_DATA_READ;
 746
 747         err = mmc_send_cmd(mmc, &cmd, &data);
 748
 749         return err;
 750 }
 751
 752 int mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value)
 753 {
 754         struct mmc_cmd cmd;
 755         int timeout = 1000;
 756         int retries = 3;
 757         int ret;
 758
 759         cmd.cmdidx = MMC_CMD_SWITCH;
 760         cmd.resp_type = MMC_RSP_R1b;
 761         cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
 762                                  (index << 16) |
 763                                  (value << 8);
 764
 765         while (retries > 0) {
 766                 ret = mmc_send_cmd(mmc, &cmd, NULL);
 767
 768                 /* Waiting for the ready status */
 769                 if (!ret) {
 770                         ret = mmc_send_status(mmc, timeout);
 771                         return ret;
 772                 }
 773
 774                 retries--;
 775         }
 776
 777         return ret;
 778
 779 }
 780
 781 static int mmc_set_card_speed(struct mmc *mmc, enum bus_mode mode)
 782 {
 783         int err;
 784         int speed_bits;
 785
 786         ALLOC_CACHE_ALIGN_BUFFER(u8, test_csd, MMC_MAX_BLOCK_LEN);
 787
 788         switch (mode) {
 789         case MMC_HS:
 790         case MMC_HS_52:
 791         case MMC_DDR_52:
 792                 speed_bits = EXT_CSD_TIMING_HS;
 793                 break;
 794 #if CONFIG_IS_ENABLED(MMC_HS200_SUPPORT)
 795         case MMC_HS_200:
 796                 speed_bits = EXT_CSD_TIMING_HS200;
 797                 break;
 798 #endif
 799         case MMC_LEGACY:
 800                 speed_bits = EXT_CSD_TIMING_LEGACY;
 801                 break;
 802         default:
 803                 return -EINVAL;
 804         }
 805         err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING,
 806                          speed_bits);
 807         if (err)
 808                 return err;
 809
 810         if ((mode == MMC_HS) || (mode == MMC_HS_52)) {
 811                 /* Now check to see that it worked */
 812                 err = mmc_send_ext_csd(mmc, test_csd);
 813                 if (err)
 814                         return err;
 815
 816                 /* No high-speed support */
 817                 if (!test_csd[EXT_CSD_HS_TIMING])
 818                         return -ENOTSUPP;
 819         }
 820
 821         return 0;
 822 }
 823
 824 static int mmc_get_capabilities(struct mmc *mmc)
 825 {
 826         u8 *ext_csd = mmc->ext_csd;
 827         char cardtype;
 828
 829         mmc->card_caps = MMC_MODE_1BIT | MMC_CAP(MMC_LEGACY);
 830
 831         if (mmc_host_is_spi(mmc))
 832                 return 0;
 833
 834         /* Only version 4 supports high-speed */
 835         if (mmc->version < MMC_VERSION_4)
 836                 return 0;
 837
 838         if (!ext_csd) {
 839                 pr_err("No ext_csd found!\n"); /* this should enver happen */
 840                 return -ENOTSUPP;
 841         }
 842
 843         mmc->card_caps |= MMC_MODE_4BIT | MMC_MODE_8BIT;
 844
 845         cardtype = ext_csd[EXT_CSD_CARD_TYPE] & 0x3f;
 846         mmc->cardtype = cardtype;
 847
 848 #if CONFIG_IS_ENABLED(MMC_HS200_SUPPORT)
 849         if (cardtype & (EXT_CSD_CARD_TYPE_HS200_1_2V |
 850                         EXT_CSD_CARD_TYPE_HS200_1_8V)) {
 851                 mmc->card_caps |= MMC_MODE_HS200;
 852         }
 853 #endif
 854         if (cardtype & EXT_CSD_CARD_TYPE_52) {
 855                 if (cardtype & EXT_CSD_CARD_TYPE_DDR_52)
 856                         mmc->card_caps |= MMC_MODE_DDR_52MHz;
 857                 mmc->card_caps |= MMC_MODE_HS_52MHz;
 858         }
 859         if (cardtype & EXT_CSD_CARD_TYPE_26)
 860                 mmc->card_caps |= MMC_MODE_HS;
 861
 862         return 0;
 863 }
 864
 865 static int mmc_set_capacity(struct mmc *mmc, int part_num)
 866 {
 867         switch (part_num) {
 868         case 0:
 869                 mmc->capacity = mmc->capacity_user;
 870                 break;
 871         case 1:
 872         case 2:
 873                 mmc->capacity = mmc->capacity_boot;
 874                 break;
 875         case 3:
 876                 mmc->capacity = mmc->capacity_rpmb;
 877                 break;
 878         case 4:
 879         case 5:
 880         case 6:
 881         case 7:
 882                 mmc->capacity = mmc->capacity_gp[part_num - 4];
 883                 break;
 884         default:
 885                 return -1;
 886         }
 887
 888         mmc_get_blk_desc(mmc)->lba = lldiv(mmc->capacity, mmc->read_bl_len);
 889
 890         return 0;
 891 }
 892
 893 #if CONFIG_IS_ENABLED(MMC_HS200_SUPPORT)
 894 static int mmc_boot_part_access_chk(struct mmc *mmc, unsigned int part_num)
 895 {
 896         int forbidden = 0;
 897         bool change = false;
 898
 899         if (part_num & PART_ACCESS_MASK)
 900                 forbidden = MMC_CAP(MMC_HS_200);
 901
 902         if (MMC_CAP(mmc->selected_mode) & forbidden) {
 903                 pr_debug("selected mode (%s) is forbidden for part %d\n",
 904                          mmc_mode_name(mmc->selected_mode), part_num);
 905                 change = true;
 906         } else if (mmc->selected_mode != mmc->best_mode) {
 907                 pr_debug("selected mode is not optimal\n");
 908                 change = true;
 909         }
 910
 911         if (change)
 912                 return mmc_select_mode_and_width(mmc,
 913                                                  mmc->card_caps & ~forbidden);
 914
 915         return 0;
 916 }
 917 #else
 918 static inline int mmc_boot_part_access_chk(struct mmc *mmc,
 919                                            unsigned int part_num)
 920 {
 921         return 0;
 922 }
 923 #endif
 924
 925 int mmc_switch_part(struct mmc *mmc, unsigned int part_num)
 926 {
 927         int ret;
 928
 929         ret = mmc_boot_part_access_chk(mmc, part_num);
 930         if (ret)
 931                 return ret;
 932
 933         ret = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_PART_CONF,
 934                          (mmc->part_config & ~PART_ACCESS_MASK)
 935                          | (part_num & PART_ACCESS_MASK));
 936
 937         /*
 938          * Set the capacity if the switch succeeded or was intended
 939          * to return to representing the raw device.
 940          */
 941         if ((ret == 0) || ((ret == -ENODEV) && (part_num == 0))) {
 942                 ret = mmc_set_capacity(mmc, part_num);
 943                 mmc_get_blk_desc(mmc)->hwpart = part_num;
 944         }
 945
 946         return ret;
 947 }
 948
 949 #if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING)
 950 int mmc_hwpart_config(struct mmc *mmc,
 951                       const struct mmc_hwpart_conf *conf,
 952                       enum mmc_hwpart_conf_mode mode)
 953 {
 954         u8 part_attrs = 0;
 955         u32 enh_size_mult;
 956         u32 enh_start_addr;
 957         u32 gp_size_mult[4];
 958         u32 max_enh_size_mult;
 959         u32 tot_enh_size_mult = 0;
 960         u8 wr_rel_set;
 961         int i, pidx, err;
 962         ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, MMC_MAX_BLOCK_LEN);
 963
 964         if (mode < MMC_HWPART_CONF_CHECK || mode > MMC_HWPART_CONF_COMPLETE)
 965                 return -EINVAL;
 966
 967         if (IS_SD(mmc) || (mmc->version < MMC_VERSION_4_41)) {
 968                 pr_err("eMMC >= 4.4 required for enhanced user data area\n");
 969                 return -EMEDIUMTYPE;
 970         }
 971
 972         if (!(mmc->part_support & PART_SUPPORT)) {
 973                 pr_err("Card does not support partitioning\n");
 974                 return -EMEDIUMTYPE;
 975         }
 976
 977         if (!mmc->hc_wp_grp_size) {
 978                 pr_err("Card does not define HC WP group size\n");
 979                 return -EMEDIUMTYPE;
 980         }
 981
 982         /* check partition alignment and total enhanced size */
 983         if (conf->user.enh_size) {
 984                 if (conf->user.enh_size % mmc->hc_wp_grp_size ||
 985                     conf->user.enh_start % mmc->hc_wp_grp_size) {
 986                         pr_err("User data enhanced area not HC WP group "
 987                                "size aligned\n");
 988                         return -EINVAL;
 989                 }
 990                 part_attrs |= EXT_CSD_ENH_USR;
 991                 enh_size_mult = conf->user.enh_size / mmc->hc_wp_grp_size;
 992                 if (mmc->high_capacity) {
 993                         enh_start_addr = conf->user.enh_start;
 994                 } else {
 995                         enh_start_addr = (conf->user.enh_start << 9);
 996                 }
 997         } else {
 998                 enh_size_mult = 0;
 999                 enh_start_addr = 0;
1000         }
1001         tot_enh_size_mult += enh_size_mult;
1002
1003         for (pidx = 0; pidx < 4; pidx++) {
1004                 if (conf->gp_part[pidx].size % mmc->hc_wp_grp_size) {
1005                         pr_err("GP%i partition not HC WP group size "
1006                                "aligned\n", pidx+1);
1007                         return -EINVAL;
1008                 }
1009                 gp_size_mult[pidx] = conf->gp_part[pidx].size / mmc->hc_wp_grp_size;
1010                 if (conf->gp_part[pidx].size && conf->gp_part[pidx].enhanced) {
1011                         part_attrs |= EXT_CSD_ENH_GP(pidx);
1012                         tot_enh_size_mult += gp_size_mult[pidx];
1013                 }
1014         }
1015
1016         if (part_attrs && ! (mmc->part_support & ENHNCD_SUPPORT)) {
1017                 pr_err("Card does not support enhanced attribute\n");
1018                 return -EMEDIUMTYPE;
1019         }
1020
1021         err = mmc_send_ext_csd(mmc, ext_csd);
1022         if (err)
1023                 return err;
1024
1025         max_enh_size_mult =
1026                 (ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT+2] << 16) +
1027                 (ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT+1] << 8) +
1028                 ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT];
1029         if (tot_enh_size_mult > max_enh_size_mult) {
1030                 pr_err("Total enhanced size exceeds maximum (%u > %u)\n",
1031                        tot_enh_size_mult, max_enh_size_mult);
1032                 return -EMEDIUMTYPE;
1033         }
1034
1035         /* The default value of EXT_CSD_WR_REL_SET is device
1036          * dependent, the values can only be changed if the
1037          * EXT_CSD_HS_CTRL_REL bit is set. The values can be
1038          * changed only once and before partitioning is completed. */
1039         wr_rel_set = ext_csd[EXT_CSD_WR_REL_SET];
1040         if (conf->user.wr_rel_change) {
1041                 if (conf->user.wr_rel_set)
1042                         wr_rel_set |= EXT_CSD_WR_DATA_REL_USR;
1043                 else
1044                         wr_rel_set &= ~EXT_CSD_WR_DATA_REL_USR;
1045         }
1046         for (pidx = 0; pidx < 4; pidx++) {
1047                 if (conf->gp_part[pidx].wr_rel_change) {
1048                         if (conf->gp_part[pidx].wr_rel_set)
1049                                 wr_rel_set |= EXT_CSD_WR_DATA_REL_GP(pidx);
1050                         else
1051                                 wr_rel_set &= ~EXT_CSD_WR_DATA_REL_GP(pidx);
1052                 }
1053         }
1054
1055         if (wr_rel_set != ext_csd[EXT_CSD_WR_REL_SET] &&
1056             !(ext_csd[EXT_CSD_WR_REL_PARAM] & EXT_CSD_HS_CTRL_REL)) {
1057                 puts("Card does not support host controlled partition write "
1058                      "reliability settings\n");
1059                 return -EMEDIUMTYPE;
1060         }
1061
1062         if (ext_csd[EXT_CSD_PARTITION_SETTING] &
1063             EXT_CSD_PARTITION_SETTING_COMPLETED) {
1064                 pr_err("Card already partitioned\n");
1065                 return -EPERM;
1066         }
1067
1068         if (mode == MMC_HWPART_CONF_CHECK)
1069                 return 0;
1070
1071         /* Partitioning requires high-capacity size definitions */
1072         if (!(ext_csd[EXT_CSD_ERASE_GROUP_DEF] & 0x01)) {
1073                 err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
1074                                  EXT_CSD_ERASE_GROUP_DEF, 1);
1075
1076                 if (err)
1077                         return err;
1078
1079                 ext_csd[EXT_CSD_ERASE_GROUP_DEF] = 1;
1080
1081                 /* update erase group size to be high-capacity */
1082                 mmc->erase_grp_size =
1083                         ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] * 1024;
1084
1085         }
1086
1087         /* all OK, write the configuration */
1088         for (i = 0; i < 4; i++) {
1089                 err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
1090                                  EXT_CSD_ENH_START_ADDR+i,
1091                                  (enh_start_addr >> (i*8)) & 0xFF);
1092                 if (err)
1093                         return err;
1094         }
1095         for (i = 0; i < 3; i++) {
1096                 err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
1097                                  EXT_CSD_ENH_SIZE_MULT+i,
1098                                  (enh_size_mult >> (i*8)) & 0xFF);
1099                 if (err)
1100                         return err;
1101         }
1102         for (pidx = 0; pidx < 4; pidx++) {
1103                 for (i = 0; i < 3; i++) {
1104                         err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
1105                                          EXT_CSD_GP_SIZE_MULT+pidx*3+i,
1106                                          (gp_size_mult[pidx] >> (i*8)) & 0xFF);
1107                         if (err)
1108                                 return err;
1109                 }
1110         }
1111         err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
1112                          EXT_CSD_PARTITIONS_ATTRIBUTE, part_attrs);
1113         if (err)
1114                 return err;
1115
1116         if (mode == MMC_HWPART_CONF_SET)
1117                 return 0;
1118
1119         /* The WR_REL_SET is a write-once register but shall be
1120          * written before setting PART_SETTING_COMPLETED. As it is
1121          * write-once we can only write it when completing the
1122          * partitioning. */
1123         if (wr_rel_set != ext_csd[EXT_CSD_WR_REL_SET]) {
1124                 err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
1125                                  EXT_CSD_WR_REL_SET, wr_rel_set);
1126                 if (err)
1127                         return err;
1128         }
1129
1130         /* Setting PART_SETTING_COMPLETED confirms the partition
1131          * configuration but it only becomes effective after power
1132          * cycle, so we do not adjust the partition related settings
1133          * in the mmc struct. */
1134
1135         err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
1136                          EXT_CSD_PARTITION_SETTING,
1137                          EXT_CSD_PARTITION_SETTING_COMPLETED);
1138         if (err)
1139                 return err;
1140
1141         return 0;
1142 }
1143 #endif
1144
1145 #if !CONFIG_IS_ENABLED(DM_MMC)
1146 int mmc_getcd(struct mmc *mmc)
1147 {
1148         int cd;
1149
1150         cd = board_mmc_getcd(mmc);
1151
1152         if (cd < 0) {
1153                 if (mmc->cfg->ops->getcd)
1154                         cd = mmc->cfg->ops->getcd(mmc);
1155                 else
1156                         cd = 1;
1157         }
1158
1159         return cd;
1160 }
1161 #endif
1162
1163 static int sd_switch(struct mmc *mmc, int mode, int group, u8 value, u8 *resp)
1164 {
1165         struct mmc_cmd cmd;
1166         struct mmc_data data;
1167
1168         /* Switch the frequency */
1169         cmd.cmdidx = SD_CMD_SWITCH_FUNC;
1170         cmd.resp_type = MMC_RSP_R1;
1171         cmd.cmdarg = (mode << 31) | 0xffffff;
1172         cmd.cmdarg &= ~(0xf << (group * 4));
1173         cmd.cmdarg |= value << (group * 4);
1174
1175         data.dest = (char *)resp;
1176         data.blocksize = 64;
1177         data.blocks = 1;
1178         data.flags = MMC_DATA_READ;
1179
1180         return mmc_send_cmd(mmc, &cmd, &data);
1181 }
1182
1183
1184 static int sd_get_capabilities(struct mmc *mmc)
1185 {
1186         int err;
1187         struct mmc_cmd cmd;
1188         ALLOC_CACHE_ALIGN_BUFFER(__be32, scr, 2);
1189         ALLOC_CACHE_ALIGN_BUFFER(__be32, switch_status, 16);
1190         struct mmc_data data;
1191         int timeout;
1192 #if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)
1193         u32 sd3_bus_mode;
1194 #endif
1195
1196         mmc->card_caps = MMC_MODE_1BIT | MMC_CAP(SD_LEGACY);
1197
1198         if (mmc_host_is_spi(mmc))
1199                 return 0;
1200
1201         /* Read the SCR to find out if this card supports higher speeds */
1202         cmd.cmdidx = MMC_CMD_APP_CMD;
1203         cmd.resp_type = MMC_RSP_R1;
1204         cmd.cmdarg = mmc->rca << 16;
1205
1206         err = mmc_send_cmd(mmc, &cmd, NULL);
1207
1208         if (err)
1209                 return err;
1210
1211         cmd.cmdidx = SD_CMD_APP_SEND_SCR;
1212         cmd.resp_type = MMC_RSP_R1;
1213         cmd.cmdarg = 0;
1214
1215         timeout = 3;
1216
1217 retry_scr:
1218         data.dest = (char *)scr;
1219         data.blocksize = 8;
1220         data.blocks = 1;
1221         data.flags = MMC_DATA_READ;
1222
1223         err = mmc_send_cmd(mmc, &cmd, &data);
1224
1225         if (err) {
1226                 if (timeout--)
1227                         goto retry_scr;
1228
1229                 return err;
1230         }
1231
1232         mmc->scr[0] = __be32_to_cpu(scr[0]);
1233         mmc->scr[1] = __be32_to_cpu(scr[1]);
1234
1235         switch ((mmc->scr[0] >> 24) & 0xf) {
1236         case 0:
1237                 mmc->version = SD_VERSION_1_0;
1238                 break;
1239         case 1:
1240                 mmc->version = SD_VERSION_1_10;
1241                 break;
1242         case 2:
1243                 mmc->version = SD_VERSION_2;
1244                 if ((mmc->scr[0] >> 15) & 0x1)
1245                         mmc->version = SD_VERSION_3;
1246                 break;
1247         default:
1248                 mmc->version = SD_VERSION_1_0;
1249                 break;
1250         }
1251
1252         if (mmc->scr[0] & SD_DATA_4BIT)
1253                 mmc->card_caps |= MMC_MODE_4BIT;
1254
1255         /* Version 1.0 doesn't support switching */
1256         if (mmc->version == SD_VERSION_1_0)
1257                 return 0;
1258
1259         timeout = 4;
1260         while (timeout--) {
1261                 err = sd_switch(mmc, SD_SWITCH_CHECK, 0, 1,
1262                                 (u8 *)switch_status);
1263
1264                 if (err)
1265                         return err;
1266
1267                 /* The high-speed function is busy.  Try again */
1268                 if (!(__be32_to_cpu(switch_status[7]) & SD_HIGHSPEED_BUSY))
1269                         break;
1270         }
1271
1272         /* If high-speed isn't supported, we return */
1273         if (__be32_to_cpu(switch_status[3]) & SD_HIGHSPEED_SUPPORTED)
1274                 mmc->card_caps |= MMC_CAP(SD_HS);
1275
1276 #if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)
1277         /* Version before 3.0 don't support UHS modes */
1278         if (mmc->version < SD_VERSION_3)
1279                 return 0;
1280
1281         sd3_bus_mode = __be32_to_cpu(switch_status[3]) >> 16 & 0x1f;
1282         if (sd3_bus_mode & SD_MODE_UHS_SDR104)
1283                 mmc->card_caps |= MMC_CAP(UHS_SDR104);
1284         if (sd3_bus_mode & SD_MODE_UHS_SDR50)
1285                 mmc->card_caps |= MMC_CAP(UHS_SDR50);
1286         if (sd3_bus_mode & SD_MODE_UHS_SDR25)
1287                 mmc->card_caps |= MMC_CAP(UHS_SDR25);
1288         if (sd3_bus_mode & SD_MODE_UHS_SDR12)
1289                 mmc->card_caps |= MMC_CAP(UHS_SDR12);
1290         if (sd3_bus_mode & SD_MODE_UHS_DDR50)
1291                 mmc->card_caps |= MMC_CAP(UHS_DDR50);
1292 #endif
1293
1294         return 0;
1295 }
1296
1297 static int sd_set_card_speed(struct mmc *mmc, enum bus_mode mode)
1298 {
1299         int err;
1300
1301         ALLOC_CACHE_ALIGN_BUFFER(uint, switch_status, 16);
1302         int speed;
1303
1304         switch (mode) {
1305         case SD_LEGACY:
1306                 speed = UHS_SDR12_BUS_SPEED;
1307                 break;
1308         case SD_HS:
1309                 speed = HIGH_SPEED_BUS_SPEED;
1310                 break;
1311 #if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)
1312         case UHS_SDR12:
1313                 speed = UHS_SDR12_BUS_SPEED;
1314                 break;
1315         case UHS_SDR25:
1316                 speed = UHS_SDR25_BUS_SPEED;
1317                 break;
1318         case UHS_SDR50:
1319                 speed = UHS_SDR50_BUS_SPEED;
1320                 break;
1321         case UHS_DDR50:
1322                 speed = UHS_DDR50_BUS_SPEED;
1323                 break;
1324         case UHS_SDR104:
1325                 speed = UHS_SDR104_BUS_SPEED;
1326                 break;
1327 #endif
1328         default:
1329                 return -EINVAL;
1330         }
1331
1332         err = sd_switch(mmc, SD_SWITCH_SWITCH, 0, speed, (u8 *)switch_status);
1333         if (err)
1334                 return err;
1335
1336         if ((__be32_to_cpu(switch_status[4]) >> 24) != speed)
1337                 return -ENOTSUPP;
1338
1339         return 0;
1340 }
1341
1342 int sd_select_bus_width(struct mmc *mmc, int w)
1343 {
1344         int err;
1345         struct mmc_cmd cmd;
1346
1347         if ((w != 4) && (w != 1))
1348                 return -EINVAL;
1349
1350         cmd.cmdidx = MMC_CMD_APP_CMD;
1351         cmd.resp_type = MMC_RSP_R1;
1352         cmd.cmdarg = mmc->rca << 16;
1353
1354         err = mmc_send_cmd(mmc, &cmd, NULL);
1355         if (err)
1356                 return err;
1357
1358         cmd.cmdidx = SD_CMD_APP_SET_BUS_WIDTH;
1359         cmd.resp_type = MMC_RSP_R1;
1360         if (w == 4)
1361                 cmd.cmdarg = 2;
1362         else if (w == 1)
1363                 cmd.cmdarg = 0;
1364         err = mmc_send_cmd(mmc, &cmd, NULL);
1365         if (err)
1366                 return err;
1367
1368         return 0;
1369 }
1370
1371 #if CONFIG_IS_ENABLED(MMC_WRITE)
1372 static int sd_read_ssr(struct mmc *mmc)
1373 {
1374         static const unsigned int sd_au_size[] = {
1375                 0,              SZ_16K / 512,           SZ_32K / 512,
1376                 SZ_64K / 512,   SZ_128K / 512,          SZ_256K / 512,
1377                 SZ_512K / 512,  SZ_1M / 512,            SZ_2M / 512,
1378                 SZ_4M / 512,    SZ_8M / 512,            (SZ_8M + SZ_4M) / 512,
1379                 SZ_16M / 512,   (SZ_16M + SZ_8M) / 512, SZ_32M / 512,
1380                 SZ_64M / 512,
1381         };
1382         int err, i;
1383         struct mmc_cmd cmd;
1384         ALLOC_CACHE_ALIGN_BUFFER(uint, ssr, 16);
1385         struct mmc_data data;
1386         int timeout = 3;
1387         unsigned int au, eo, et, es;
1388
1389         cmd.cmdidx = MMC_CMD_APP_CMD;
1390         cmd.resp_type = MMC_RSP_R1;
1391         cmd.cmdarg = mmc->rca << 16;
1392
1393         err = mmc_send_cmd(mmc, &cmd, NULL);
1394         if (err)
1395                 return err;
1396
1397         cmd.cmdidx = SD_CMD_APP_SD_STATUS;
1398         cmd.resp_type = MMC_RSP_R1;
1399         cmd.cmdarg = 0;
1400
1401 retry_ssr:
1402         data.dest = (char *)ssr;
1403         data.blocksize = 64;
1404         data.blocks = 1;
1405         data.flags = MMC_DATA_READ;
1406
1407         err = mmc_send_cmd(mmc, &cmd, &data);
1408         if (err) {
1409                 if (timeout--)
1410                         goto retry_ssr;
1411
1412                 return err;
1413         }
1414
1415         for (i = 0; i < 16; i++)
1416                 ssr[i] = be32_to_cpu(ssr[i]);
1417
1418         au = (ssr[2] >> 12) & 0xF;
1419         if ((au <= 9) || (mmc->version == SD_VERSION_3)) {
1420                 mmc->ssr.au = sd_au_size[au];
1421                 es = (ssr[3] >> 24) & 0xFF;
1422                 es |= (ssr[2] & 0xFF) << 8;
1423                 et = (ssr[3] >> 18) & 0x3F;
1424                 if (es && et) {
1425                         eo = (ssr[3] >> 16) & 0x3;
1426                         mmc->ssr.erase_timeout = (et * 1000) / es;
1427                         mmc->ssr.erase_offset = eo * 1000;
1428                 }
1429         } else {
1430                 pr_debug("Invalid Allocation Unit Size.\n");
1431         }
1432
1433         return 0;
1434 }
1435 #endif
1436 /* frequency bases */
1437 /* divided by 10 to be nice to platforms without floating point */
1438 static const int fbase[] = {
1439         10000,
1440         100000,
1441         1000000,
1442         10000000,
1443 };
1444
1445 /* Multiplier values for TRAN_SPEED.  Multiplied by 10 to be nice
1446  * to platforms without floating point.
1447  */
1448 static const u8 multipliers[] = {
1449         0,      /* reserved */
1450         10,
1451         12,
1452         13,
1453         15,
1454         20,
1455         25,
1456         30,
1457         35,
1458         40,
1459         45,
1460         50,
1461         55,
1462         60,
1463         70,
1464         80,
1465 };
1466
1467 static inline int bus_width(uint cap)
1468 {
1469         if (cap == MMC_MODE_8BIT)
1470                 return 8;
1471         if (cap == MMC_MODE_4BIT)
1472                 return 4;
1473         if (cap == MMC_MODE_1BIT)
1474                 return 1;
1475         pr_warn("invalid bus witdh capability 0x%x\n", cap);
1476         return 0;
1477 }
1478
1479 #if !CONFIG_IS_ENABLED(DM_MMC)
1480 #ifdef MMC_SUPPORTS_TUNING
1481 static int mmc_execute_tuning(struct mmc *mmc, uint opcode)
1482 {
1483         return -ENOTSUPP;
1484 }
1485 #endif
1486
1487 static void mmc_send_init_stream(struct mmc *mmc)
1488 {
1489 }
1490
1491 static int mmc_set_ios(struct mmc *mmc)
1492 {
1493         int ret = 0;
1494
1495         if (mmc->cfg->ops->set_ios)
1496                 ret = mmc->cfg->ops->set_ios(mmc);
1497
1498         return ret;
1499 }
1500 #endif
1501
1502 int mmc_set_clock(struct mmc *mmc, uint clock, bool disable)
1503 {
1504         if (!disable) {
1505                 if (clock > mmc->cfg->f_max)
1506                         clock = mmc->cfg->f_max;
1507
1508                 if (clock < mmc->cfg->f_min)
1509                         clock = mmc->cfg->f_min;
1510         }
1511
1512         mmc->clock = clock;
1513         mmc->clk_disable = disable;
1514
1515         return mmc_set_ios(mmc);
1516 }
1517
1518 static int mmc_set_bus_width(struct mmc *mmc, uint width)
1519 {
1520         mmc->bus_width = width;
1521
1522         return mmc_set_ios(mmc);
1523 }
1524
1525 #if CONFIG_IS_ENABLED(MMC_VERBOSE) || defined(DEBUG)
1526 /*
1527  * helper function to display the capabilities in a human
1528  * friendly manner. The capabilities include bus width and
1529  * supported modes.
1530  */
1531 void mmc_dump_capabilities(const char *text, uint caps)
1532 {
1533         enum bus_mode mode;
1534
1535         pr_debug("%s: widths [", text);
1536         if (caps & MMC_MODE_8BIT)
1537                 pr_debug("8, ");
1538         if (caps & MMC_MODE_4BIT)
1539                 pr_debug("4, ");
1540         if (caps & MMC_MODE_1BIT)
1541                 pr_debug("1, ");
1542         pr_debug("\b\b] modes [");
1543         for (mode = MMC_LEGACY; mode < MMC_MODES_END; mode++)
1544                 if (MMC_CAP(mode) & caps)
1545                         pr_debug("%s, ", mmc_mode_name(mode));
1546         pr_debug("\b\b]\n");
1547 }
1548 #endif
1549
1550 struct mode_width_tuning {
1551         enum bus_mode mode;
1552         uint widths;
1553 #ifdef MMC_SUPPORTS_TUNING
1554         uint tuning;
1555 #endif
1556 };
1557
1558 #if CONFIG_IS_ENABLED(MMC_IO_VOLTAGE)
1559 int mmc_voltage_to_mv(enum mmc_voltage voltage)
1560 {
1561         switch (voltage) {
1562         case MMC_SIGNAL_VOLTAGE_000: return 0;
1563         case MMC_SIGNAL_VOLTAGE_330: return 3300;
1564         case MMC_SIGNAL_VOLTAGE_180: return 1800;
1565         case MMC_SIGNAL_VOLTAGE_120: return 1200;
1566         }
1567         return -EINVAL;
1568 }
1569
1570 static int mmc_set_signal_voltage(struct mmc *mmc, uint signal_voltage)
1571 {
1572         int err;
1573
1574         if (mmc->signal_voltage == signal_voltage)
1575                 return 0;
1576
1577         mmc->signal_voltage = signal_voltage;
1578         err = mmc_set_ios(mmc);
1579         if (err)
1580                 pr_debug("unable to set voltage (err %d)\n", err);
1581
1582         return err;
1583 }
1584 #else
1585 static inline int mmc_set_signal_voltage(struct mmc *mmc, uint signal_voltage)
1586 {
1587         return 0;
1588 }
1589 #endif
1590
1591 static const struct mode_width_tuning sd_modes_by_pref[] = {
1592 #if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)
1593 #ifdef MMC_SUPPORTS_TUNING
1594         {
1595                 .mode = UHS_SDR104,
1596                 .widths = MMC_MODE_4BIT | MMC_MODE_1BIT,
1597                 .tuning = MMC_CMD_SEND_TUNING_BLOCK
1598         },
1599 #endif
1600         {
1601                 .mode = UHS_SDR50,
1602                 .widths = MMC_MODE_4BIT | MMC_MODE_1BIT,
1603         },
1604         {
1605                 .mode = UHS_DDR50,
1606                 .widths = MMC_MODE_4BIT | MMC_MODE_1BIT,
1607         },
1608         {
1609                 .mode = UHS_SDR25,
1610                 .widths = MMC_MODE_4BIT | MMC_MODE_1BIT,
1611         },
1612 #endif
1613         {
1614                 .mode = SD_HS,
1615                 .widths = MMC_MODE_4BIT | MMC_MODE_1BIT,
1616         },
1617 #if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)
1618         {
1619                 .mode = UHS_SDR12,
1620                 .widths = MMC_MODE_4BIT | MMC_MODE_1BIT,
1621         },
1622 #endif
1623         {
1624                 .mode = SD_LEGACY,
1625                 .widths = MMC_MODE_4BIT | MMC_MODE_1BIT,
1626         }
1627 };
1628
1629 #define for_each_sd_mode_by_pref(caps, mwt) \
1630         for (mwt = sd_modes_by_pref;\
1631              mwt < sd_modes_by_pref + ARRAY_SIZE(sd_modes_by_pref);\
1632              mwt++) \
1633                 if (caps & MMC_CAP(mwt->mode))
1634
1635 static int sd_select_mode_and_width(struct mmc *mmc, uint card_caps)
1636 {
1637         int err;
1638         uint widths[] = {MMC_MODE_4BIT, MMC_MODE_1BIT};
1639         const struct mode_width_tuning *mwt;
1640 #if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)
1641         bool uhs_en = (mmc->ocr & OCR_S18R) ? true : false;
1642 #else
1643         bool uhs_en = false;
1644 #endif
1645         uint caps;
1646
1647 #ifdef DEBUG
1648         mmc_dump_capabilities("sd card", card_caps);
1649         mmc_dump_capabilities("host", mmc->host_caps);
1650 #endif
1651
1652         /* Restrict card's capabilities by what the host can do */
1653         caps = card_caps & mmc->host_caps;
1654
1655         if (!uhs_en)
1656                 caps &= ~UHS_CAPS;
1657
1658         for_each_sd_mode_by_pref(caps, mwt) {
1659                 uint *w;
1660
1661                 for (w = widths; w < widths + ARRAY_SIZE(widths); w++) {
1662                         if (*w & caps & mwt->widths) {
1663                                 pr_debug("trying mode %s width %d (at %d MHz)\n",
1664                                          mmc_mode_name(mwt->mode),
1665                                          bus_width(*w),
1666                                          mmc_mode2freq(mmc, mwt->mode) / 1000000);
1667
1668                                 /* configure the bus width (card + host) */
1669                                 err = sd_select_bus_width(mmc, bus_width(*w));
1670                                 if (err)
1671                                         goto error;
1672                                 mmc_set_bus_width(mmc, bus_width(*w));
1673
1674                                 /* configure the bus mode (card) */
1675                                 err = sd_set_card_speed(mmc, mwt->mode);
1676                                 if (err)
1677                                         goto error;
1678
1679                                 /* configure the bus mode (host) */
1680                                 mmc_select_mode(mmc, mwt->mode);
1681                                 mmc_set_clock(mmc, mmc->tran_speed, false);
1682
1683 #ifdef MMC_SUPPORTS_TUNING
1684                                 /* execute tuning if needed */
1685                                 if (mwt->tuning && !mmc_host_is_spi(mmc)) {
1686                                         err = mmc_execute_tuning(mmc,
1687                                                                  mwt->tuning);
1688                                         if (err) {
1689                                                 pr_debug("tuning failed\n");
1690                                                 goto error;
1691                                         }
1692                                 }
1693 #endif
1694
1695 #if CONFIG_IS_ENABLED(MMC_WRITE)
1696                                 err = sd_read_ssr(mmc);
1697                                 if (!err)
1698                                         pr_warn("unable to read ssr\n");
1699 #endif
1700                                 if (!err)
1701                                         return 0;
1702
1703 error:
1704                                 /* revert to a safer bus speed */
1705                                 mmc_select_mode(mmc, SD_LEGACY);
1706                                 mmc_set_clock(mmc, mmc->tran_speed, false);
1707                         }
1708                 }
1709         }
1710
1711         pr_err("unable to select a mode\n");
1712         return -ENOTSUPP;
1713 }
1714
1715 /*
1716  * read the compare the part of ext csd that is constant.
1717  * This can be used to check that the transfer is working
1718  * as expected.
1719  */
1720 static int mmc_read_and_compare_ext_csd(struct mmc *mmc)
1721 {
1722         int err;
1723         const u8 *ext_csd = mmc->ext_csd;
1724         ALLOC_CACHE_ALIGN_BUFFER(u8, test_csd, MMC_MAX_BLOCK_LEN);
1725
1726         if (mmc->version < MMC_VERSION_4)
1727                 return 0;
1728
1729         err = mmc_send_ext_csd(mmc, test_csd);
1730         if (err)
1731                 return err;
1732
1733         /* Only compare read only fields */
1734         if (ext_csd[EXT_CSD_PARTITIONING_SUPPORT]
1735                 == test_csd[EXT_CSD_PARTITIONING_SUPPORT] &&
1736             ext_csd[EXT_CSD_HC_WP_GRP_SIZE]
1737                 == test_csd[EXT_CSD_HC_WP_GRP_SIZE] &&
1738             ext_csd[EXT_CSD_REV]
1739                 == test_csd[EXT_CSD_REV] &&
1740             ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]
1741                 == test_csd[EXT_CSD_HC_ERASE_GRP_SIZE] &&
1742             memcmp(&ext_csd[EXT_CSD_SEC_CNT],
1743                    &test_csd[EXT_CSD_SEC_CNT], 4) == 0)
1744                 return 0;
1745
1746         return -EBADMSG;
1747 }
1748
1749 #if CONFIG_IS_ENABLED(MMC_IO_VOLTAGE)
1750 static int mmc_set_lowest_voltage(struct mmc *mmc, enum bus_mode mode,
1751                                   uint32_t allowed_mask)
1752 {
1753         u32 card_mask = 0;
1754
1755         switch (mode) {
1756         case MMC_HS_200:
1757                 if (mmc->cardtype & EXT_CSD_CARD_TYPE_HS200_1_8V)
1758                         card_mask |= MMC_SIGNAL_VOLTAGE_180;
1759                 if (mmc->cardtype & EXT_CSD_CARD_TYPE_HS200_1_2V)
1760                         card_mask |= MMC_SIGNAL_VOLTAGE_120;
1761                 break;
1762         case MMC_DDR_52:
1763                 if (mmc->cardtype & EXT_CSD_CARD_TYPE_DDR_1_8V)
1764                         card_mask |= MMC_SIGNAL_VOLTAGE_330 |
1765                                      MMC_SIGNAL_VOLTAGE_180;
1766                 if (mmc->cardtype & EXT_CSD_CARD_TYPE_DDR_1_2V)
1767                         card_mask |= MMC_SIGNAL_VOLTAGE_120;
1768                 break;
1769         default:
1770                 card_mask |= MMC_SIGNAL_VOLTAGE_330;
1771                 break;
1772         }
1773
1774         while (card_mask & allowed_mask) {
1775                 enum mmc_voltage best_match;
1776
1777                 best_match = 1 << (ffs(card_mask & allowed_mask) - 1);
1778                 if (!mmc_set_signal_voltage(mmc,  best_match))
1779                         return 0;
1780
1781                 allowed_mask &= ~best_match;
1782         }
1783
1784         return -ENOTSUPP;
1785 }
1786 #else
1787 static inline int mmc_set_lowest_voltage(struct mmc *mmc, enum bus_mode mode,
1788                                          uint32_t allowed_mask)
1789 {
1790         return 0;
1791 }
1792 #endif
1793
1794 static const struct mode_width_tuning mmc_modes_by_pref[] = {
1795 #if CONFIG_IS_ENABLED(MMC_HS200_SUPPORT)
1796         {
1797                 .mode = MMC_HS_200,
1798                 .widths = MMC_MODE_8BIT | MMC_MODE_4BIT,
1799                 .tuning = MMC_CMD_SEND_TUNING_BLOCK_HS200
1800         },
1801 #endif
1802         {
1803                 .mode = MMC_DDR_52,
1804                 .widths = MMC_MODE_8BIT | MMC_MODE_4BIT,
1805         },
1806         {
1807                 .mode = MMC_HS_52,
1808                 .widths = MMC_MODE_8BIT | MMC_MODE_4BIT | MMC_MODE_1BIT,
1809         },
1810         {
1811                 .mode = MMC_HS,
1812                 .widths = MMC_MODE_8BIT | MMC_MODE_4BIT | MMC_MODE_1BIT,
1813         },
1814         {
1815                 .mode = MMC_LEGACY,
1816                 .widths = MMC_MODE_8BIT | MMC_MODE_4BIT | MMC_MODE_1BIT,
1817         }
1818 };
1819
1820 #define for_each_mmc_mode_by_pref(caps, mwt) \
1821         for (mwt = mmc_modes_by_pref;\
1822             mwt < mmc_modes_by_pref + ARRAY_SIZE(mmc_modes_by_pref);\
1823             mwt++) \
1824                 if (caps & MMC_CAP(mwt->mode))
1825
1826 static const struct ext_csd_bus_width {
1827         uint cap;
1828         bool is_ddr;
1829         uint ext_csd_bits;
1830 } ext_csd_bus_width[] = {
1831         {MMC_MODE_8BIT, true, EXT_CSD_DDR_BUS_WIDTH_8},
1832         {MMC_MODE_4BIT, true, EXT_CSD_DDR_BUS_WIDTH_4},
1833         {MMC_MODE_8BIT, false, EXT_CSD_BUS_WIDTH_8},
1834         {MMC_MODE_4BIT, false, EXT_CSD_BUS_WIDTH_4},
1835         {MMC_MODE_1BIT, false, EXT_CSD_BUS_WIDTH_1},
1836 };
1837
1838 #define for_each_supported_width(caps, ddr, ecbv) \
1839         for (ecbv = ext_csd_bus_width;\
1840             ecbv < ext_csd_bus_width + ARRAY_SIZE(ext_csd_bus_width);\
1841             ecbv++) \
1842                 if ((ddr == ecbv->is_ddr) && (caps & ecbv->cap))
1843
1844 static int mmc_select_mode_and_width(struct mmc *mmc, uint card_caps)
1845 {
1846         int err;
1847         const struct mode_width_tuning *mwt;
1848         const struct ext_csd_bus_width *ecbw;
1849
1850 #ifdef DEBUG
1851         mmc_dump_capabilities("mmc", card_caps);
1852         mmc_dump_capabilities("host", mmc->host_caps);
1853 #endif
1854
1855         /* Restrict card's capabilities by what the host can do */
1856         card_caps &= mmc->host_caps;
1857
1858         /* Only version 4 of MMC supports wider bus widths */
1859         if (mmc->version < MMC_VERSION_4)
1860                 return 0;
1861
1862         if (!mmc->ext_csd) {
1863                 pr_debug("No ext_csd found!\n"); /* this should enver happen */
1864                 return -ENOTSUPP;
1865         }
1866
1867         mmc_set_clock(mmc, mmc->legacy_speed, false);
1868
1869         for_each_mmc_mode_by_pref(card_caps, mwt) {
1870                 for_each_supported_width(card_caps & mwt->widths,
1871                                          mmc_is_mode_ddr(mwt->mode), ecbw) {
1872                         enum mmc_voltage old_voltage;
1873                         pr_debug("trying mode %s width %d (at %d MHz)\n",
1874                                  mmc_mode_name(mwt->mode),
1875                                  bus_width(ecbw->cap),
1876                                  mmc_mode2freq(mmc, mwt->mode) / 1000000);
1877                         old_voltage = mmc->signal_voltage;
1878                         err = mmc_set_lowest_voltage(mmc, mwt->mode,
1879                                                      MMC_ALL_SIGNAL_VOLTAGE);
1880                         if (err)
1881                                 continue;
1882
1883                         /* configure the bus width (card + host) */
1884                         err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
1885                                     EXT_CSD_BUS_WIDTH,
1886                                     ecbw->ext_csd_bits & ~EXT_CSD_DDR_FLAG);
1887                         if (err)
1888                                 goto error;
1889                         mmc_set_bus_width(mmc, bus_width(ecbw->cap));
1890
1891                         /* configure the bus speed (card) */
1892                         err = mmc_set_card_speed(mmc, mwt->mode);
1893                         if (err)
1894                                 goto error;
1895
1896                         /*
1897                          * configure the bus width AND the ddr mode (card)
1898                          * The host side will be taken care of in the next step
1899                          */
1900                         if (ecbw->ext_csd_bits & EXT_CSD_DDR_FLAG) {
1901                                 err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
1902                                                  EXT_CSD_BUS_WIDTH,
1903                                                  ecbw->ext_csd_bits);
1904                                 if (err)
1905                                         goto error;
1906                         }
1907
1908                         /* configure the bus mode (host) */
1909                         mmc_select_mode(mmc, mwt->mode);
1910                         mmc_set_clock(mmc, mmc->tran_speed, false);
1911 #ifdef MMC_SUPPORTS_TUNING
1912
1913                         /* execute tuning if needed */
1914                         if (mwt->tuning) {
1915                                 err = mmc_execute_tuning(mmc, mwt->tuning);
1916                                 if (err) {
1917                                         pr_debug("tuning failed\n");
1918                                         goto error;
1919                                 }
1920                         }
1921 #endif
1922
1923                         /* do a transfer to check the configuration */
1924                         err = mmc_read_and_compare_ext_csd(mmc);
1925                         if (!err)
1926                                 return 0;
1927 error:
1928                         mmc_set_signal_voltage(mmc, old_voltage);
1929                         /* if an error occured, revert to a safer bus mode */
1930                         mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
1931                                    EXT_CSD_BUS_WIDTH, EXT_CSD_BUS_WIDTH_1);
1932                         mmc_select_mode(mmc, MMC_LEGACY);
1933                         mmc_set_bus_width(mmc, 1);
1934                 }
1935         }
1936
1937         pr_err("unable to select a mode\n");
1938
1939         return -ENOTSUPP;
1940 }
1941
1942 static int mmc_startup_v4(struct mmc *mmc)
1943 {
1944         int err, i;
1945         u64 capacity;
1946         bool has_parts = false;
1947         bool part_completed;
1948         static const u32 mmc_versions[] = {
1949                 MMC_VERSION_4,
1950                 MMC_VERSION_4_1,
1951                 MMC_VERSION_4_2,
1952                 MMC_VERSION_4_3,
1953                 MMC_VERSION_4_41,
1954                 MMC_VERSION_4_5,
1955                 MMC_VERSION_5_0,
1956                 MMC_VERSION_5_1
1957         };
1958
1959         ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, MMC_MAX_BLOCK_LEN);
1960
1961         if (IS_SD(mmc) || (mmc->version < MMC_VERSION_4))
1962                 return 0;
1963
1964         /* check  ext_csd version and capacity */
1965         err = mmc_send_ext_csd(mmc, ext_csd);
1966         if (err)
1967                 goto error;
1968
1969         /* store the ext csd for future reference */
1970         if (!mmc->ext_csd)
1971                 mmc->ext_csd = malloc(MMC_MAX_BLOCK_LEN);
1972         if (!mmc->ext_csd)
1973                 return -ENOMEM;
1974         memcpy(mmc->ext_csd, ext_csd, MMC_MAX_BLOCK_LEN);
1975
1976         if (ext_csd[EXT_CSD_REV] > ARRAY_SIZE(mmc_versions))
1977                 return -EINVAL;
1978
1979         mmc->version = mmc_versions[ext_csd[EXT_CSD_REV]];
1980
1981         if (mmc->version >= MMC_VERSION_4_2) {
1982                 /*
1983                  * According to the JEDEC Standard, the value of
1984                  * ext_csd's capacity is valid if the value is more
1985                  * than 2GB
1986                  */
1987                 capacity = ext_csd[EXT_CSD_SEC_CNT] << 0
1988                                 | ext_csd[EXT_CSD_SEC_CNT + 1] << 8
1989                                 | ext_csd[EXT_CSD_SEC_CNT + 2] << 16
1990                                 | ext_csd[EXT_CSD_SEC_CNT + 3] << 24;
1991                 capacity *= MMC_MAX_BLOCK_LEN;
1992                 if ((capacity >> 20) > 2 * 1024)
1993                         mmc->capacity_user = capacity;
1994         }
1995
1996         /* The partition data may be non-zero but it is only
1997          * effective if PARTITION_SETTING_COMPLETED is set in
1998          * EXT_CSD, so ignore any data if this bit is not set,
1999          * except for enabling the high-capacity group size
2000          * definition (see below).
2001          */
2002         part_completed = !!(ext_csd[EXT_CSD_PARTITION_SETTING] &
2003                             EXT_CSD_PARTITION_SETTING_COMPLETED);
2004
2005         /* store the partition info of emmc */
2006         mmc->part_support = ext_csd[EXT_CSD_PARTITIONING_SUPPORT];
2007         if ((ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & PART_SUPPORT) ||
2008             ext_csd[EXT_CSD_BOOT_MULT])
2009                 mmc->part_config = ext_csd[EXT_CSD_PART_CONF];
2010         if (part_completed &&
2011             (ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & ENHNCD_SUPPORT))
2012                 mmc->part_attr = ext_csd[EXT_CSD_PARTITIONS_ATTRIBUTE];
2013
2014         mmc->capacity_boot = ext_csd[EXT_CSD_BOOT_MULT] << 17;
2015
2016         mmc->capacity_rpmb = ext_csd[EXT_CSD_RPMB_MULT] << 17;
2017
2018         for (i = 0; i < 4; i++) {
2019                 int idx = EXT_CSD_GP_SIZE_MULT + i * 3;
2020                 uint mult = (ext_csd[idx + 2] << 16) +
2021                         (ext_csd[idx + 1] << 8) + ext_csd[idx];
2022                 if (mult)
2023                         has_parts = true;
2024                 if (!part_completed)
2025                         continue;
2026                 mmc->capacity_gp[i] = mult;
2027                 mmc->capacity_gp[i] *=
2028                         ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE];
2029                 mmc->capacity_gp[i] *= ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
2030                 mmc->capacity_gp[i] <<= 19;
2031         }
2032
2033 #ifndef CONFIG_SPL_BUILD
2034         if (part_completed) {
2035                 mmc->enh_user_size =
2036                         (ext_csd[EXT_CSD_ENH_SIZE_MULT + 2] << 16) +
2037                         (ext_csd[EXT_CSD_ENH_SIZE_MULT + 1] << 8) +
2038                         ext_csd[EXT_CSD_ENH_SIZE_MULT];
2039                 mmc->enh_user_size *= ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE];
2040                 mmc->enh_user_size *= ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
2041                 mmc->enh_user_size <<= 19;
2042                 mmc->enh_user_start =
2043                         (ext_csd[EXT_CSD_ENH_START_ADDR + 3] << 24) +
2044                         (ext_csd[EXT_CSD_ENH_START_ADDR + 2] << 16) +
2045                         (ext_csd[EXT_CSD_ENH_START_ADDR + 1] << 8) +
2046                         ext_csd[EXT_CSD_ENH_START_ADDR];
2047                 if (mmc->high_capacity)
2048                         mmc->enh_user_start <<= 9;
2049         }
2050 #endif
2051
2052         /*
2053          * Host needs to enable ERASE_GRP_DEF bit if device is
2054          * partitioned. This bit will be lost every time after a reset
2055          * or power off. This will affect erase size.
2056          */
2057         if (part_completed)
2058                 has_parts = true;
2059         if ((ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & PART_SUPPORT) &&
2060             (ext_csd[EXT_CSD_PARTITIONS_ATTRIBUTE] & PART_ENH_ATTRIB))
2061                 has_parts = true;
2062         if (has_parts) {
2063                 err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
2064                                  EXT_CSD_ERASE_GROUP_DEF, 1);
2065
2066                 if (err)
2067                         goto error;
2068
2069                 ext_csd[EXT_CSD_ERASE_GROUP_DEF] = 1;
2070         }
2071
2072         if (ext_csd[EXT_CSD_ERASE_GROUP_DEF] & 0x01) {
2073 #if CONFIG_IS_ENABLED(MMC_WRITE)
2074                 /* Read out group size from ext_csd */
2075                 mmc->erase_grp_size =
2076                         ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] * 1024;
2077 #endif
2078                 /*
2079                  * if high capacity and partition setting completed
2080                  * SEC_COUNT is valid even if it is smaller than 2 GiB
2081                  * JEDEC Standard JESD84-B45, 6.2.4
2082                  */
2083                 if (mmc->high_capacity && part_completed) {
2084                         capacity = (ext_csd[EXT_CSD_SEC_CNT]) |
2085                                 (ext_csd[EXT_CSD_SEC_CNT + 1] << 8) |
2086                                 (ext_csd[EXT_CSD_SEC_CNT + 2] << 16) |
2087                                 (ext_csd[EXT_CSD_SEC_CNT + 3] << 24);
2088                         capacity *= MMC_MAX_BLOCK_LEN;
2089                         mmc->capacity_user = capacity;
2090                 }
2091         }
2092 #if CONFIG_IS_ENABLED(MMC_WRITE)
2093         else {
2094                 /* Calculate the group size from the csd value. */
2095                 int erase_gsz, erase_gmul;
2096
2097                 erase_gsz = (mmc->csd[2] & 0x00007c00) >> 10;
2098                 erase_gmul = (mmc->csd[2] & 0x000003e0) >> 5;
2099                 mmc->erase_grp_size = (erase_gsz + 1)
2100                         * (erase_gmul + 1);
2101         }
2102 #endif
2103 #if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING)
2104         mmc->hc_wp_grp_size = 1024
2105                 * ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]
2106                 * ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
2107 #endif
2108
2109         mmc->wr_rel_set = ext_csd[EXT_CSD_WR_REL_SET];
2110
2111         return 0;
2112 error:
2113         if (mmc->ext_csd) {
2114                 free(mmc->ext_csd);
2115                 mmc->ext_csd = NULL;
2116         }
2117         return err;
2118 }
2119
2120 static int mmc_startup(struct mmc *mmc)
2121 {
2122         int err, i;
2123         uint mult, freq;
2124         u64 cmult, csize;
2125         struct mmc_cmd cmd;
2126         struct blk_desc *bdesc;
2127
2128 #ifdef CONFIG_MMC_SPI_CRC_ON
2129         if (mmc_host_is_spi(mmc)) { /* enable CRC check for spi */
2130                 cmd.cmdidx = MMC_CMD_SPI_CRC_ON_OFF;
2131                 cmd.resp_type = MMC_RSP_R1;
2132                 cmd.cmdarg = 1;
2133                 err = mmc_send_cmd(mmc, &cmd, NULL);
2134                 if (err)
2135                         return err;
2136         }
2137 #endif
2138
2139         /* Put the Card in Identify Mode */
2140         cmd.cmdidx = mmc_host_is_spi(mmc) ? MMC_CMD_SEND_CID :
2141                 MMC_CMD_ALL_SEND_CID; /* cmd not supported in spi */
2142         cmd.resp_type = MMC_RSP_R2;
2143         cmd.cmdarg = 0;
2144
2145         err = mmc_send_cmd(mmc, &cmd, NULL);
2146
2147 #ifdef CONFIG_MMC_QUIRKS
2148         if (err && (mmc->quirks & MMC_QUIRK_RETRY_SEND_CID)) {
2149                 int retries = 4;
2150                 /*
2151                  * It has been seen that SEND_CID may fail on the first
2152                  * attempt, let's try a few more time
2153                  */
2154                 do {
2155                         err = mmc_send_cmd(mmc, &cmd, NULL);
2156                         if (!err)
2157                                 break;
2158                 } while (retries--);
2159         }
2160 #endif
2161
2162         if (err)
2163                 return err;
2164
2165         memcpy(mmc->cid, cmd.response, 16);
2166
2167         /*
2168          * For MMC cards, set the Relative Address.
2169          * For SD cards, get the Relatvie Address.
2170          * This also puts the cards into Standby State
2171          */
2172         if (!mmc_host_is_spi(mmc)) { /* cmd not supported in spi */
2173                 cmd.cmdidx = SD_CMD_SEND_RELATIVE_ADDR;
2174                 cmd.cmdarg = mmc->rca << 16;
2175                 cmd.resp_type = MMC_RSP_R6;
2176
2177                 err = mmc_send_cmd(mmc, &cmd, NULL);
2178
2179                 if (err)
2180                         return err;
2181
2182                 if (IS_SD(mmc))
2183                         mmc->rca = (cmd.response[0] >> 16) & 0xffff;
2184         }
2185
2186         /* Get the Card-Specific Data */
2187         cmd.cmdidx = MMC_CMD_SEND_CSD;
2188         cmd.resp_type = MMC_RSP_R2;
2189         cmd.cmdarg = mmc->rca << 16;
2190
2191         err = mmc_send_cmd(mmc, &cmd, NULL);
2192
2193         if (err)
2194                 return err;
2195
2196         mmc->csd[0] = cmd.response[0];
2197         mmc->csd[1] = cmd.response[1];
2198         mmc->csd[2] = cmd.response[2];
2199         mmc->csd[3] = cmd.response[3];
2200
2201         if (mmc->version == MMC_VERSION_UNKNOWN) {
2202                 int version = (cmd.response[0] >> 26) & 0xf;
2203
2204                 switch (version) {
2205                 case 0:
2206                         mmc->version = MMC_VERSION_1_2;
2207                         break;
2208                 case 1:
2209                         mmc->version = MMC_VERSION_1_4;
2210                         break;
2211                 case 2:
2212                         mmc->version = MMC_VERSION_2_2;
2213                         break;
2214                 case 3:
2215                         mmc->version = MMC_VERSION_3;
2216                         break;
2217                 case 4:
2218                         mmc->version = MMC_VERSION_4;
2219                         break;
2220                 default:
2221                         mmc->version = MMC_VERSION_1_2;
2222                         break;
2223                 }
2224         }
2225
2226         /* divide frequency by 10, since the mults are 10x bigger */
2227         freq = fbase[(cmd.response[0] & 0x7)];
2228         mult = multipliers[((cmd.response[0] >> 3) & 0xf)];
2229
2230         mmc->legacy_speed = freq * mult;
2231         mmc_select_mode(mmc, MMC_LEGACY);
2232
2233         mmc->dsr_imp = ((cmd.response[1] >> 12) & 0x1);
2234         mmc->read_bl_len = 1 << ((cmd.response[1] >> 16) & 0xf);
2235 #if CONFIG_IS_ENABLED(MMC_WRITE)
2236
2237         if (IS_SD(mmc))
2238                 mmc->write_bl_len = mmc->read_bl_len;
2239         else
2240                 mmc->write_bl_len = 1 << ((cmd.response[3] >> 22) & 0xf);
2241 #endif
2242
2243         if (mmc->high_capacity) {
2244                 csize = (mmc->csd[1] & 0x3f) << 16
2245                         | (mmc->csd[2] & 0xffff0000) >> 16;
2246                 cmult = 8;
2247         } else {
2248                 csize = (mmc->csd[1] & 0x3ff) << 2
2249                         | (mmc->csd[2] & 0xc0000000) >> 30;
2250                 cmult = (mmc->csd[2] & 0x00038000) >> 15;
2251         }
2252
2253         mmc->capacity_user = (csize + 1) << (cmult + 2);
2254         mmc->capacity_user *= mmc->read_bl_len;
2255         mmc->capacity_boot = 0;
2256         mmc->capacity_rpmb = 0;
2257         for (i = 0; i < 4; i++)
2258                 mmc->capacity_gp[i] = 0;
2259
2260         if (mmc->read_bl_len > MMC_MAX_BLOCK_LEN)
2261                 mmc->read_bl_len = MMC_MAX_BLOCK_LEN;
2262
2263 #if CONFIG_IS_ENABLED(MMC_WRITE)
2264         if (mmc->write_bl_len > MMC_MAX_BLOCK_LEN)
2265                 mmc->write_bl_len = MMC_MAX_BLOCK_LEN;
2266 #endif
2267
2268         if ((mmc->dsr_imp) && (0xffffffff != mmc->dsr)) {
2269                 cmd.cmdidx = MMC_CMD_SET_DSR;
2270                 cmd.cmdarg = (mmc->dsr & 0xffff) << 16;
2271                 cmd.resp_type = MMC_RSP_NONE;
2272                 if (mmc_send_cmd(mmc, &cmd, NULL))
2273                         pr_warn("MMC: SET_DSR failed\n");
2274         }
2275
2276         /* Select the card, and put it into Transfer Mode */
2277         if (!mmc_host_is_spi(mmc)) { /* cmd not supported in spi */
2278                 cmd.cmdidx = MMC_CMD_SELECT_CARD;
2279                 cmd.resp_type = MMC_RSP_R1;
2280                 cmd.cmdarg = mmc->rca << 16;
2281                 err = mmc_send_cmd(mmc, &cmd, NULL);
2282
2283                 if (err)
2284                         return err;
2285         }
2286
2287         /*
2288          * For SD, its erase group is always one sector
2289          */
2290 #if CONFIG_IS_ENABLED(MMC_WRITE)
2291         mmc->erase_grp_size = 1;
2292 #endif
2293         mmc->part_config = MMCPART_NOAVAILABLE;
2294
2295         err = mmc_startup_v4(mmc);
2296         if (err)
2297                 return err;
2298
2299         err = mmc_set_capacity(mmc, mmc_get_blk_desc(mmc)->hwpart);
2300         if (err)
2301                 return err;
2302
2303         if (IS_SD(mmc)) {
2304                 err = sd_get_capabilities(mmc);
2305                 if (err)
2306                         return err;
2307                 err = sd_select_mode_and_width(mmc, mmc->card_caps);
2308         } else {
2309                 err = mmc_get_capabilities(mmc);
2310                 if (err)
2311                         return err;
2312                 mmc_select_mode_and_width(mmc, mmc->card_caps);
2313         }
2314
2315         if (err)
2316                 return err;
2317
2318         mmc->best_mode = mmc->selected_mode;
2319
2320         /* Fix the block length for DDR mode */
2321         if (mmc->ddr_mode) {
2322                 mmc->read_bl_len = MMC_MAX_BLOCK_LEN;
2323 #if CONFIG_IS_ENABLED(MMC_WRITE)
2324                 mmc->write_bl_len = MMC_MAX_BLOCK_LEN;
2325 #endif
2326         }
2327
2328         /* fill in device description */
2329         bdesc = mmc_get_blk_desc(mmc);
2330         bdesc->lun = 0;
2331         bdesc->hwpart = 0;
2332         bdesc->type = 0;
2333         bdesc->blksz = mmc->read_bl_len;
2334         bdesc->log2blksz = LOG2(bdesc->blksz);
2335         bdesc->lba = lldiv(mmc->capacity, mmc->read_bl_len);
2336 #if !defined(CONFIG_SPL_BUILD) || \
2337                 (defined(CONFIG_SPL_LIBCOMMON_SUPPORT) && \
2338                 !defined(CONFIG_USE_TINY_PRINTF))
2339         sprintf(bdesc->vendor, "Man %06x Snr %04x%04x",
2340                 mmc->cid[0] >> 24, (mmc->cid[2] & 0xffff),
2341                 (mmc->cid[3] >> 16) & 0xffff);
2342         sprintf(bdesc->product, "%c%c%c%c%c%c", mmc->cid[0] & 0xff,
2343                 (mmc->cid[1] >> 24), (mmc->cid[1] >> 16) & 0xff,
2344                 (mmc->cid[1] >> 8) & 0xff, mmc->cid[1] & 0xff,
2345                 (mmc->cid[2] >> 24) & 0xff);
2346         sprintf(bdesc->revision, "%d.%d", (mmc->cid[2] >> 20) & 0xf,
2347                 (mmc->cid[2] >> 16) & 0xf);
2348 #else
2349         bdesc->vendor[0] = 0;
2350         bdesc->product[0] = 0;
2351         bdesc->revision[0] = 0;
2352 #endif
2353 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBDISK_SUPPORT)
2354         part_init(bdesc);
2355 #endif
2356
2357         return 0;
2358 }
2359
2360 static int mmc_send_if_cond(struct mmc *mmc)
2361 {
2362         struct mmc_cmd cmd;
2363         int err;
2364
2365         cmd.cmdidx = SD_CMD_SEND_IF_COND;
2366         /* We set the bit if the host supports voltages between 2.7 and 3.6 V */
2367         cmd.cmdarg = ((mmc->cfg->voltages & 0xff8000) != 0) << 8 | 0xaa;
2368         cmd.resp_type = MMC_RSP_R7;
2369
2370         err = mmc_send_cmd(mmc, &cmd, NULL);
2371
2372         if (err)
2373                 return err;
2374
2375         if ((cmd.response[0] & 0xff) != 0xaa)
2376                 return -EOPNOTSUPP;
2377         else
2378                 mmc->version = SD_VERSION_2;
2379
2380         return 0;
2381 }
2382
2383 #if !CONFIG_IS_ENABLED(DM_MMC)
2384 /* board-specific MMC power initializations. */
2385 __weak void board_mmc_power_init(void)
2386 {
2387 }
2388 #endif
2389
2390 static int mmc_power_init(struct mmc *mmc)
2391 {
2392 #if CONFIG_IS_ENABLED(DM_MMC)
2393 #if CONFIG_IS_ENABLED(DM_REGULATOR)
2394         int ret;
2395
2396         ret = device_get_supply_regulator(mmc->dev, "vmmc-supply",
2397                                           &mmc->vmmc_supply);
2398         if (ret)
2399                 pr_debug("%s: No vmmc supply\n", mmc->dev->name);
2400
2401         ret = device_get_supply_regulator(mmc->dev, "vqmmc-supply",
2402                                           &mmc->vqmmc_supply);
2403         if (ret)
2404                 pr_debug("%s: No vqmmc supply\n", mmc->dev->name);
2405 #endif
2406 #else /* !CONFIG_DM_MMC */
2407         /*
2408          * Driver model should use a regulator, as above, rather than calling
2409          * out to board code.
2410          */
2411         board_mmc_power_init();
2412 #endif
2413         return 0;
2414 }
2415
2416 /*
2417  * put the host in the initial state:
2418  * - turn on Vdd (card power supply)
2419  * - configure the bus width and clock to minimal values
2420  */
2421 static void mmc_set_initial_state(struct mmc *mmc)
2422 {
2423         int err;
2424
2425         /* First try to set 3.3V. If it fails set to 1.8V */
2426         err = mmc_set_signal_voltage(mmc, MMC_SIGNAL_VOLTAGE_330);
2427         if (err != 0)
2428                 err = mmc_set_signal_voltage(mmc, MMC_SIGNAL_VOLTAGE_180);
2429         if (err != 0)
2430                 pr_warn("mmc: failed to set signal voltage\n");
2431
2432         mmc_select_mode(mmc, MMC_LEGACY);
2433         mmc_set_bus_width(mmc, 1);
2434         mmc_set_clock(mmc, 0, false);
2435 }
2436
2437 static int mmc_power_on(struct mmc *mmc)
2438 {
2439 #if CONFIG_IS_ENABLED(DM_MMC) && CONFIG_IS_ENABLED(DM_REGULATOR)
2440         if (mmc->vmmc_supply) {
2441                 int ret = regulator_set_enable(mmc->vmmc_supply, true);
2442
2443                 if (ret) {
2444                         puts("Error enabling VMMC supply\n");
2445                         return ret;
2446                 }
2447         }
2448 #endif
2449         return 0;
2450 }
2451
2452 static int mmc_power_off(struct mmc *mmc)
2453 {
2454         mmc_set_clock(mmc, 0, true);
2455 #if CONFIG_IS_ENABLED(DM_MMC) && CONFIG_IS_ENABLED(DM_REGULATOR)
2456         if (mmc->vmmc_supply) {
2457                 int ret = regulator_set_enable(mmc->vmmc_supply, false);
2458
2459                 if (ret) {
2460                         pr_debug("Error disabling VMMC supply\n");
2461                         return ret;
2462                 }
2463         }
2464 #endif
2465         return 0;
2466 }
2467
2468 static int mmc_power_cycle(struct mmc *mmc)
2469 {
2470         int ret;
2471
2472         ret = mmc_power_off(mmc);
2473         if (ret)
2474                 return ret;
2475         /*
2476          * SD spec recommends at least 1ms of delay. Let's wait for 2ms
2477          * to be on the safer side.
2478          */
2479         udelay(2000);
2480         return mmc_power_on(mmc);
2481 }
2482
2483 int mmc_start_init(struct mmc *mmc)
2484 {
2485         bool no_card;
2486         bool uhs_en = supports_uhs(mmc->cfg->host_caps);
2487         int err;
2488
2489         /*
2490          * all hosts are capable of 1 bit bus-width and able to use the legacy
2491          * timings.
2492          */
2493         mmc->host_caps = mmc->cfg->host_caps | MMC_CAP(SD_LEGACY) |
2494                          MMC_CAP(MMC_LEGACY) | MMC_MODE_1BIT;
2495
2496 #if !defined(CONFIG_MMC_BROKEN_CD)
2497         /* we pretend there's no card when init is NULL */
2498         no_card = mmc_getcd(mmc) == 0;
2499 #else
2500         no_card = 0;
2501 #endif
2502 #if !CONFIG_IS_ENABLED(DM_MMC)
2503         no_card = no_card || (mmc->cfg->ops->init == NULL);
2504 #endif
2505         if (no_card) {
2506                 mmc->has_init = 0;
2507 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
2508                 pr_err("MMC: no card present\n");
2509 #endif
2510                 return -ENOMEDIUM;
2511         }
2512
2513         if (mmc->has_init)
2514                 return 0;
2515
2516 #ifdef CONFIG_FSL_ESDHC_ADAPTER_IDENT
2517         mmc_adapter_card_type_ident();
2518 #endif
2519         err = mmc_power_init(mmc);
2520         if (err)
2521                 return err;
2522
2523 #ifdef CONFIG_MMC_QUIRKS
2524         mmc->quirks = MMC_QUIRK_RETRY_SET_BLOCKLEN |
2525                       MMC_QUIRK_RETRY_SEND_CID;
2526 #endif
2527
2528         err = mmc_power_cycle(mmc);
2529         if (err) {
2530                 /*
2531                  * if power cycling is not supported, we should not try
2532                  * to use the UHS modes, because we wouldn't be able to
2533                  * recover from an error during the UHS initialization.
2534                  */
2535                 pr_debug("Unable to do a full power cycle. Disabling the UHS modes for safety\n");
2536                 uhs_en = false;
2537                 mmc->host_caps &= ~UHS_CAPS;
2538                 err = mmc_power_on(mmc);
2539         }
2540         if (err)
2541                 return err;
2542
2543 #if CONFIG_IS_ENABLED(DM_MMC)
2544         /* The device has already been probed ready for use */
2545 #else
2546         /* made sure it's not NULL earlier */
2547         err = mmc->cfg->ops->init(mmc);
2548         if (err)
2549                 return err;
2550 #endif
2551         mmc->ddr_mode = 0;
2552
2553 retry:
2554         mmc_set_initial_state(mmc);
2555         mmc_send_init_stream(mmc);
2556
2557         /* Reset the Card */
2558         err = mmc_go_idle(mmc);
2559
2560         if (err)
2561                 return err;
2562
2563         /* The internal partition reset to user partition(0) at every CMD0*/
2564         mmc_get_blk_desc(mmc)->hwpart = 0;
2565
2566         /* Test for SD version 2 */
2567         err = mmc_send_if_cond(mmc);
2568
2569         /* Now try to get the SD card's operating condition */
2570         err = sd_send_op_cond(mmc, uhs_en);
2571         if (err && uhs_en) {
2572                 uhs_en = false;
2573                 mmc_power_cycle(mmc);
2574                 goto retry;
2575         }
2576
2577         /* If the command timed out, we check for an MMC card */
2578         if (err == -ETIMEDOUT) {
2579                 err = mmc_send_op_cond(mmc);
2580
2581                 if (err) {
2582 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
2583                         pr_err("Card did not respond to voltage select!\n");
2584 #endif
2585                         return -EOPNOTSUPP;
2586                 }
2587         }
2588
2589         if (!err)
2590                 mmc->init_in_progress = 1;
2591
2592         return err;
2593 }
2594
2595 static int mmc_complete_init(struct mmc *mmc)
2596 {
2597         int err = 0;
2598
2599         mmc->init_in_progress = 0;
2600         if (mmc->op_cond_pending)
2601                 err = mmc_complete_op_cond(mmc);
2602
2603         if (!err)
2604                 err = mmc_startup(mmc);
2605         if (err)
2606                 mmc->has_init = 0;
2607         else
2608                 mmc->has_init = 1;
2609         return err;
2610 }
2611
2612 int mmc_init(struct mmc *mmc)
2613 {
2614         int err = 0;
2615         __maybe_unused unsigned start;
2616 #if CONFIG_IS_ENABLED(DM_MMC)
2617         struct mmc_uclass_priv *upriv = dev_get_uclass_priv(mmc->dev);
2618
2619         upriv->mmc = mmc;
2620 #endif
2621         if (mmc->has_init)
2622                 return 0;
2623
2624         start = get_timer(0);
2625
2626         if (!mmc->init_in_progress)
2627                 err = mmc_start_init(mmc);
2628
2629         if (!err)
2630                 err = mmc_complete_init(mmc);
2631         if (err)
2632                 pr_info("%s: %d, time %lu\n", __func__, err, get_timer(start));
2633
2634         return err;
2635 }
2636
2637 int mmc_set_dsr(struct mmc *mmc, u16 val)
2638 {
2639         mmc->dsr = val;
2640         return 0;
2641 }
2642
2643 /* CPU-specific MMC initializations */
2644 __weak int cpu_mmc_init(bd_t *bis)
2645 {
2646         return -1;
2647 }
2648
2649 /* board-specific MMC initializations. */
2650 __weak int board_mmc_init(bd_t *bis)
2651 {
2652         return -1;
2653 }
2654
2655 void mmc_set_preinit(struct mmc *mmc, int preinit)
2656 {
2657         mmc->preinit = preinit;
2658 }
2659
2660 #if CONFIG_IS_ENABLED(DM_MMC) && defined(CONFIG_SPL_BUILD)
2661 static int mmc_probe(bd_t *bis)
2662 {
2663         return 0;
2664 }
2665 #elif CONFIG_IS_ENABLED(DM_MMC)
2666 static int mmc_probe(bd_t *bis)
2667 {
2668         int ret, i;
2669         struct uclass *uc;
2670         struct udevice *dev;
2671
2672         ret = uclass_get(UCLASS_MMC, &uc);
2673         if (ret)
2674                 return ret;
2675
2676         /*
2677          * Try to add them in sequence order. Really with driver model we
2678          * should allow holes, but the current MMC list does not allow that.
2679          * So if we request 0, 1, 3 we will get 0, 1, 2.
2680          */
2681         for (i = 0; ; i++) {
2682                 ret = uclass_get_device_by_seq(UCLASS_MMC, i, &dev);
2683                 if (ret == -ENODEV)
2684                         break;
2685         }
2686         uclass_foreach_dev(dev, uc) {
2687                 ret = device_probe(dev);
2688                 if (ret)
2689                         pr_err("%s - probe failed: %d\n", dev->name, ret);
2690         }
2691
2692         return 0;
2693 }
2694 #else
2695 static int mmc_probe(bd_t *bis)
2696 {
2697         if (board_mmc_init(bis) < 0)
2698                 cpu_mmc_init(bis);
2699
2700         return 0;
2701 }
2702 #endif
2703
2704 int mmc_initialize(bd_t *bis)
2705 {
2706         static int initialized = 0;
2707         int ret;
2708         if (initialized)        /* Avoid initializing mmc multiple times */
2709                 return 0;
2710         initialized = 1;
2711
2712 #if !CONFIG_IS_ENABLED(BLK)
2713 #if !CONFIG_IS_ENABLED(MMC_TINY)
2714         mmc_list_init();
2715 #endif
2716 #endif
2717         ret = mmc_probe(bis);
2718         if (ret)
2719                 return ret;
2720
2721 #ifndef CONFIG_SPL_BUILD
2722         print_mmc_devices(',');
2723 #endif
2724
2725         mmc_do_preinit();
2726         return 0;
2727 }
2728
2729 #ifdef CONFIG_CMD_BKOPS_ENABLE
2730 int mmc_set_bkops_enable(struct mmc *mmc)
2731 {
2732         int err;
2733         ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, MMC_MAX_BLOCK_LEN);
2734
2735         err = mmc_send_ext_csd(mmc, ext_csd);
2736         if (err) {
2737                 puts("Could not get ext_csd register values\n");
2738                 return err;
2739         }
2740
2741         if (!(ext_csd[EXT_CSD_BKOPS_SUPPORT] & 0x1)) {
2742                 puts("Background operations not supported on device\n");
2743                 return -EMEDIUMTYPE;
2744         }
2745
2746         if (ext_csd[EXT_CSD_BKOPS_EN] & 0x1) {
2747                 puts("Background operations already enabled\n");
2748                 return 0;
2749         }
2750
2751         err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BKOPS_EN, 1);
2752         if (err) {
2753                 puts("Failed to enable manual background operations\n");
2754                 return err;
2755         }
2756
2757         puts("Enabled manual background operations\n");
2758
2759         return 0;
2760 }
2761 #endif