git.sur5r.net Git - u-boot/blob - drivers/spi/stm32_qspi.c

   1 /*
   2  * (C) Copyright 2016
   3  *
   4  * Michael Kurz, <michi.kurz@gmail.com>
   5  *
   6  * STM32 QSPI driver
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #include <common.h>
  12 #include <malloc.h>
  13 #include <spi.h>
  14 #include <spi_flash.h>
  15 #include <asm/io.h>
  16 #include <dm.h>
  17 #include <errno.h>
  18 #include <asm/arch/stm32.h>
  19 #include <asm/arch/stm32_defs.h>
  20
  21 DECLARE_GLOBAL_DATA_PTR;
  22
  23 struct stm32_qspi_regs {
  24         u32 cr;         /* 0x00 */
  25         u32 dcr;        /* 0x04 */
  26         u32 sr;         /* 0x08 */
  27         u32 fcr;        /* 0x0C */
  28         u32 dlr;        /* 0x10 */
  29         u32 ccr;        /* 0x14 */
  30         u32 ar;         /* 0x18 */
  31         u32 abr;        /* 0x1C */
  32         u32 dr;         /* 0x20 */
  33         u32 psmkr;      /* 0x24 */
  34         u32 psmar;      /* 0x28 */
  35         u32 pir;        /* 0x2C */
  36         u32 lptr;       /* 0x30 */
  37 };
  38
  39 /*
  40  * QUADSPI control register
  41  */
  42 #define STM32_QSPI_CR_EN                BIT(0)
  43 #define STM32_QSPI_CR_ABORT             BIT(1)
  44 #define STM32_QSPI_CR_DMAEN             BIT(2)
  45 #define STM32_QSPI_CR_TCEN              BIT(3)
  46 #define STM32_QSPI_CR_SSHIFT            BIT(4)
  47 #define STM32_QSPI_CR_DFM               BIT(6)
  48 #define STM32_QSPI_CR_FSEL              BIT(7)
  49 #define STM32_QSPI_CR_FTHRES_MASK       GENMASK(4, 0)
  50 #define STM32_QSPI_CR_FTHRES_SHIFT      (8)
  51 #define STM32_QSPI_CR_TEIE              BIT(16)
  52 #define STM32_QSPI_CR_TCIE              BIT(17)
  53 #define STM32_QSPI_CR_FTIE              BIT(18)
  54 #define STM32_QSPI_CR_SMIE              BIT(19)
  55 #define STM32_QSPI_CR_TOIE              BIT(20)
  56 #define STM32_QSPI_CR_APMS              BIT(22)
  57 #define STM32_QSPI_CR_PMM               BIT(23)
  58 #define STM32_QSPI_CR_PRESCALER_MASK    GENMASK(7, 0)
  59 #define STM32_QSPI_CR_PRESCALER_SHIFT   (24)
  60
  61 /*
  62  * QUADSPI device configuration register
  63  */
  64 #define STM32_QSPI_DCR_CKMODE           BIT(0)
  65 #define STM32_QSPI_DCR_CSHT_MASK        GENMASK(2, 0)
  66 #define STM32_QSPI_DCR_CSHT_SHIFT       (8)
  67 #define STM32_QSPI_DCR_FSIZE_MASK       GENMASK(4, 0)
  68 #define STM32_QSPI_DCR_FSIZE_SHIFT      (16)
  69
  70 /*
  71  * QUADSPI status register
  72  */
  73 #define STM32_QSPI_SR_TEF               BIT(0)
  74 #define STM32_QSPI_SR_TCF               BIT(1)
  75 #define STM32_QSPI_SR_FTF               BIT(2)
  76 #define STM32_QSPI_SR_SMF               BIT(3)
  77 #define STM32_QSPI_SR_TOF               BIT(4)
  78 #define STM32_QSPI_SR_BUSY              BIT(5)
  79 #define STM32_QSPI_SR_FLEVEL_MASK       GENMASK(5, 0)
  80 #define STM32_QSPI_SR_FLEVEL_SHIFT      (8)
  81
  82 /*
  83  * QUADSPI flag clear register
  84  */
  85 #define STM32_QSPI_FCR_CTEF             BIT(0)
  86 #define STM32_QSPI_FCR_CTCF             BIT(1)
  87 #define STM32_QSPI_FCR_CSMF             BIT(3)
  88 #define STM32_QSPI_FCR_CTOF             BIT(4)
  89
  90 /*
  91  * QUADSPI communication configuration register
  92  */
  93 #define STM32_QSPI_CCR_DDRM             BIT(31)
  94 #define STM32_QSPI_CCR_DHHC             BIT(30)
  95 #define STM32_QSPI_CCR_SIOO             BIT(28)
  96 #define STM32_QSPI_CCR_FMODE_SHIFT      (26)
  97 #define STM32_QSPI_CCR_DMODE_SHIFT      (24)
  98 #define STM32_QSPI_CCR_DCYC_SHIFT       (18)
  99 #define STM32_QSPI_CCR_DCYC_MASK        GENMASK(4, 0)
 100 #define STM32_QSPI_CCR_ABSIZE_SHIFT     (16)
 101 #define STM32_QSPI_CCR_ABMODE_SHIFT     (14)
 102 #define STM32_QSPI_CCR_ADSIZE_SHIFT     (12)
 103 #define STM32_QSPI_CCR_ADMODE_SHIFT     (10)
 104 #define STM32_QSPI_CCR_IMODE_SHIFT      (8)
 105 #define STM32_QSPI_CCR_INSTRUCTION_MASK GENMASK(7, 0)
 106
 107 enum STM32_QSPI_CCR_IMODE {
 108         STM32_QSPI_CCR_IMODE_NONE = 0,
 109         STM32_QSPI_CCR_IMODE_ONE_LINE = 1,
 110         STM32_QSPI_CCR_IMODE_TWO_LINE = 2,
 111         STM32_QSPI_CCR_IMODE_FOUR_LINE = 3,
 112 };
 113
 114 enum STM32_QSPI_CCR_ADMODE {
 115         STM32_QSPI_CCR_ADMODE_NONE = 0,
 116         STM32_QSPI_CCR_ADMODE_ONE_LINE = 1,
 117         STM32_QSPI_CCR_ADMODE_TWO_LINE = 2,
 118         STM32_QSPI_CCR_ADMODE_FOUR_LINE = 3,
 119 };
 120
 121 enum STM32_QSPI_CCR_ADSIZE {
 122         STM32_QSPI_CCR_ADSIZE_8BIT = 0,
 123         STM32_QSPI_CCR_ADSIZE_16BIT = 1,
 124         STM32_QSPI_CCR_ADSIZE_24BIT = 2,
 125         STM32_QSPI_CCR_ADSIZE_32BIT = 3,
 126 };
 127
 128 enum STM32_QSPI_CCR_ABMODE {
 129         STM32_QSPI_CCR_ABMODE_NONE = 0,
 130         STM32_QSPI_CCR_ABMODE_ONE_LINE = 1,
 131         STM32_QSPI_CCR_ABMODE_TWO_LINE = 2,
 132         STM32_QSPI_CCR_ABMODE_FOUR_LINE = 3,
 133 };
 134
 135 enum STM32_QSPI_CCR_ABSIZE {
 136         STM32_QSPI_CCR_ABSIZE_8BIT = 0,
 137         STM32_QSPI_CCR_ABSIZE_16BIT = 1,
 138         STM32_QSPI_CCR_ABSIZE_24BIT = 2,
 139         STM32_QSPI_CCR_ABSIZE_32BIT = 3,
 140 };
 141
 142 enum STM32_QSPI_CCR_DMODE {
 143         STM32_QSPI_CCR_DMODE_NONE = 0,
 144         STM32_QSPI_CCR_DMODE_ONE_LINE = 1,
 145         STM32_QSPI_CCR_DMODE_TWO_LINE = 2,
 146         STM32_QSPI_CCR_DMODE_FOUR_LINE = 3,
 147 };
 148
 149 enum STM32_QSPI_CCR_FMODE {
 150         STM32_QSPI_CCR_IND_WRITE = 0,
 151         STM32_QSPI_CCR_IND_READ = 1,
 152         STM32_QSPI_CCR_AUTO_POLL = 2,
 153         STM32_QSPI_CCR_MEM_MAP = 3,
 154 };
 155
 156 /* default SCK frequency, unit: HZ */
 157 #define STM32_QSPI_DEFAULT_SCK_FREQ 108000000
 158
 159 struct stm32_qspi_platdata {
 160         u32 base;
 161         u32 memory_map;
 162         u32 max_hz;
 163 };
 164
 165 struct stm32_qspi_priv {
 166         struct stm32_qspi_regs *regs;
 167         u32 max_hz;
 168         u32 mode;
 169
 170         u32 command;
 171         u32 address;
 172         u32 dummycycles;
 173 #define CMD_HAS_ADR     BIT(24)
 174 #define CMD_HAS_DUMMY   BIT(25)
 175 #define CMD_HAS_DATA    BIT(26)
 176 };
 177
 178 static void _stm32_qspi_disable(struct stm32_qspi_priv *priv)
 179 {
 180         clrbits_le32(&priv->regs->cr, STM32_QSPI_CR_EN);
 181 }
 182
 183 static void _stm32_qspi_enable(struct stm32_qspi_priv *priv)
 184 {
 185         setbits_le32(&priv->regs->cr, STM32_QSPI_CR_EN);
 186 }
 187
 188 static void _stm32_qspi_wait_for_not_busy(struct stm32_qspi_priv *priv)
 189 {
 190         while (readl(&priv->regs->sr) & STM32_QSPI_SR_BUSY)
 191                 ;
 192 }
 193
 194 static void _stm32_qspi_wait_for_complete(struct stm32_qspi_priv *priv)
 195 {
 196         while (!(readl(&priv->regs->sr) & STM32_QSPI_SR_TCF))
 197                 ;
 198 }
 199
 200 static void _stm32_qspi_wait_for_ftf(struct stm32_qspi_priv *priv)
 201 {
 202         while (!(readl(&priv->regs->sr) & STM32_QSPI_SR_FTF))
 203                 ;
 204 }
 205
 206 static void _stm32_qspi_set_flash_size(struct stm32_qspi_priv *priv, u32 size)
 207 {
 208         u32 fsize = fls(size) - 1;
 209         clrsetbits_le32(&priv->regs->dcr,
 210                         STM32_QSPI_DCR_FSIZE_MASK << STM32_QSPI_DCR_FSIZE_SHIFT,
 211                         fsize << STM32_QSPI_DCR_FSIZE_SHIFT);
 212 }
 213
 214 static unsigned int _stm32_qspi_gen_ccr(struct stm32_qspi_priv *priv)
 215 {
 216         unsigned int ccr_reg = 0;
 217         u8 imode, admode, dmode;
 218         u32 mode = priv->mode;
 219         u32 cmd = (priv->command & STM32_QSPI_CCR_INSTRUCTION_MASK);
 220
 221         imode = STM32_QSPI_CCR_IMODE_ONE_LINE;
 222         admode = STM32_QSPI_CCR_ADMODE_ONE_LINE;
 223
 224         if (mode & SPI_RX_QUAD) {
 225                 dmode = STM32_QSPI_CCR_DMODE_FOUR_LINE;
 226                 if (mode & SPI_TX_QUAD) {
 227                         imode = STM32_QSPI_CCR_IMODE_FOUR_LINE;
 228                         admode = STM32_QSPI_CCR_ADMODE_FOUR_LINE;
 229                 }
 230         } else if (mode & SPI_RX_DUAL) {
 231                 dmode = STM32_QSPI_CCR_DMODE_TWO_LINE;
 232                 if (mode & SPI_TX_DUAL) {
 233                         imode = STM32_QSPI_CCR_IMODE_TWO_LINE;
 234                         admode = STM32_QSPI_CCR_ADMODE_TWO_LINE;
 235                 }
 236         } else {
 237                 dmode = STM32_QSPI_CCR_DMODE_ONE_LINE;
 238         }
 239
 240         if (priv->command & CMD_HAS_DATA)
 241                 ccr_reg |= (dmode << STM32_QSPI_CCR_DMODE_SHIFT);
 242
 243         if (priv->command & CMD_HAS_DUMMY)
 244                 ccr_reg |= ((priv->dummycycles & STM32_QSPI_CCR_DCYC_MASK)
 245                                 << STM32_QSPI_CCR_DCYC_SHIFT);
 246
 247         if (priv->command & CMD_HAS_ADR) {
 248                 ccr_reg |= (STM32_QSPI_CCR_ADSIZE_24BIT
 249                                 << STM32_QSPI_CCR_ADSIZE_SHIFT);
 250                 ccr_reg |= (admode << STM32_QSPI_CCR_ADMODE_SHIFT);
 251         }
 252         ccr_reg |= (imode << STM32_QSPI_CCR_IMODE_SHIFT);
 253         ccr_reg |= cmd;
 254         return ccr_reg;
 255 }
 256
 257 static void _stm32_qspi_enable_mmap(struct stm32_qspi_priv *priv,
 258                 struct spi_flash *flash)
 259 {
 260         priv->command = flash->read_cmd | CMD_HAS_ADR | CMD_HAS_DATA
 261                         | CMD_HAS_DUMMY;
 262         priv->dummycycles = flash->dummy_byte * 8;
 263
 264         unsigned int ccr_reg = _stm32_qspi_gen_ccr(priv);
 265         ccr_reg |= (STM32_QSPI_CCR_MEM_MAP << STM32_QSPI_CCR_FMODE_SHIFT);
 266
 267         _stm32_qspi_wait_for_not_busy(priv);
 268
 269         writel(ccr_reg, &priv->regs->ccr);
 270
 271         priv->dummycycles = 0;
 272 }
 273
 274 static void _stm32_qspi_disable_mmap(struct stm32_qspi_priv *priv)
 275 {
 276         setbits_le32(&priv->regs->cr, STM32_QSPI_CR_ABORT);
 277 }
 278
 279 static void _stm32_qspi_set_xfer_length(struct stm32_qspi_priv *priv,
 280                                         u32 length)
 281 {
 282         writel(length - 1, &priv->regs->dlr);
 283 }
 284
 285 static void _stm32_qspi_start_xfer(struct stm32_qspi_priv *priv, u32 cr_reg)
 286 {
 287         writel(cr_reg, &priv->regs->ccr);
 288
 289         if (priv->command & CMD_HAS_ADR)
 290                 writel(priv->address, &priv->regs->ar);
 291 }
 292
 293 static int _stm32_qspi_xfer(struct stm32_qspi_priv *priv,
 294                 struct spi_flash *flash, unsigned int bitlen,
 295                 const u8 *dout, u8 *din, unsigned long flags)
 296 {
 297         unsigned int words = bitlen / 8;
 298
 299         if (flags & SPI_XFER_MMAP) {
 300                 _stm32_qspi_enable_mmap(priv, flash);
 301                 return 0;
 302         } else if (flags & SPI_XFER_MMAP_END) {
 303                 _stm32_qspi_disable_mmap(priv);
 304                 return 0;
 305         }
 306
 307         if (bitlen == 0)
 308                 return -1;
 309
 310         if (bitlen % 8) {
 311                 debug("spi_xfer: Non byte aligned SPI transfer\n");
 312                 return -1;
 313         }
 314
 315         if (dout && din) {
 316                 debug("spi_xfer: QSPI cannot have data in and data out set\n");
 317                 return -1;
 318         }
 319
 320         if (!dout && (flags & SPI_XFER_BEGIN)) {
 321                 debug("spi_xfer: QSPI transfer must begin with command\n");
 322                 return -1;
 323         }
 324
 325         if (dout) {
 326                 if (flags & SPI_XFER_BEGIN) {
 327                         /* data is command */
 328                         priv->command = dout[0] | CMD_HAS_DATA;
 329                         if (words >= 4) {
 330                                 /* address is here too */
 331                                 priv->address = (dout[1] << 16) |
 332                                                 (dout[2] << 8) | dout[3];
 333                                 priv->command |= CMD_HAS_ADR;
 334                         }
 335
 336                         if (words > 4) {
 337                                 /* rest is dummy bytes */
 338                                 priv->dummycycles = (words - 4) * 8;
 339                                 priv->command |= CMD_HAS_DUMMY;
 340                         }
 341
 342                         if (flags & SPI_XFER_END) {
 343                                 /* command without data */
 344                                 priv->command &= ~(CMD_HAS_DATA);
 345                         }
 346                 }
 347
 348                 if (flags & SPI_XFER_END) {
 349                         u32 ccr_reg = _stm32_qspi_gen_ccr(priv);
 350                         ccr_reg |= STM32_QSPI_CCR_IND_WRITE
 351                                         << STM32_QSPI_CCR_FMODE_SHIFT;
 352
 353                         _stm32_qspi_wait_for_not_busy(priv);
 354
 355                         if (priv->command & CMD_HAS_DATA)
 356                                 _stm32_qspi_set_xfer_length(priv, words);
 357
 358                         _stm32_qspi_start_xfer(priv, ccr_reg);
 359
 360                         debug("%s: write: ccr:0x%08x adr:0x%08x\n",
 361                               __func__, priv->regs->ccr, priv->regs->ar);
 362
 363                         if (priv->command & CMD_HAS_DATA) {
 364                                 _stm32_qspi_wait_for_ftf(priv);
 365
 366                                 debug("%s: words:%d data:", __func__, words);
 367
 368                                 int i = 0;
 369                                 while (words > i) {
 370                                         writeb(dout[i], &priv->regs->dr);
 371                                         debug("%02x ", dout[i]);
 372                                         i++;
 373                                 }
 374                                 debug("\n");
 375
 376                                 _stm32_qspi_wait_for_complete(priv);
 377                         } else {
 378                                 _stm32_qspi_wait_for_not_busy(priv);
 379                         }
 380                 }
 381         } else if (din) {
 382                 u32 ccr_reg = _stm32_qspi_gen_ccr(priv);
 383                 ccr_reg |= STM32_QSPI_CCR_IND_READ
 384                                 << STM32_QSPI_CCR_FMODE_SHIFT;
 385
 386                 _stm32_qspi_wait_for_not_busy(priv);
 387
 388                 _stm32_qspi_set_xfer_length(priv, words);
 389
 390                 _stm32_qspi_start_xfer(priv, ccr_reg);
 391
 392                 debug("%s: read: ccr:0x%08x adr:0x%08x len:%d\n", __func__,
 393                       priv->regs->ccr, priv->regs->ar, priv->regs->dlr);
 394
 395                 debug("%s: data:", __func__);
 396
 397                 int i = 0;
 398                 while (words > i) {
 399                         din[i] = readb(&priv->regs->dr);
 400                         debug("%02x ", din[i]);
 401                         i++;
 402                 }
 403                 debug("\n");
 404         }
 405
 406         return 0;
 407 }
 408
 409 static int stm32_qspi_ofdata_to_platdata(struct udevice *bus)
 410 {
 411         struct fdt_resource res_regs, res_mem;
 412         struct stm32_qspi_platdata *plat = bus->platdata;
 413         const void *blob = gd->fdt_blob;
 414         int node = bus->of_offset;
 415         int ret;
 416
 417         ret = fdt_get_named_resource(blob, node, "reg", "reg-names",
 418                                      "QuadSPI", &res_regs);
 419         if (ret) {
 420                 debug("Error: can't get regs base addresses(ret = %d)!\n", ret);
 421                 return -ENOMEM;
 422         }
 423         ret = fdt_get_named_resource(blob, node, "reg", "reg-names",
 424                                      "QuadSPI-memory", &res_mem);
 425         if (ret) {
 426                 debug("Error: can't get mmap base address(ret = %d)!\n", ret);
 427                 return -ENOMEM;
 428         }
 429
 430         plat->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency",
 431                                         STM32_QSPI_DEFAULT_SCK_FREQ);
 432
 433         plat->base = res_regs.start;
 434         plat->memory_map = res_mem.start;
 435
 436         debug("%s: regs=<0x%x> mapped=<0x%x>, max-frequency=%d\n",
 437               __func__,
 438               plat->base,
 439               plat->memory_map,
 440               plat->max_hz
 441               );
 442
 443         return 0;
 444 }
 445
 446 static int stm32_qspi_probe(struct udevice *bus)
 447 {
 448         struct stm32_qspi_platdata *plat = dev_get_platdata(bus);
 449         struct stm32_qspi_priv *priv = dev_get_priv(bus);
 450         struct dm_spi_bus *dm_spi_bus;
 451
 452         dm_spi_bus = bus->uclass_priv;
 453
 454         dm_spi_bus->max_hz = plat->max_hz;
 455
 456         priv->regs = (struct stm32_qspi_regs *)(uintptr_t)plat->base;
 457
 458         priv->max_hz = plat->max_hz;
 459
 460         clock_setup(QSPI_CLOCK_CFG);
 461
 462         setbits_le32(&priv->regs->cr, STM32_QSPI_CR_SSHIFT);
 463
 464         return 0;
 465 }
 466
 467 static int stm32_qspi_remove(struct udevice *bus)
 468 {
 469         return 0;
 470 }
 471
 472 static int stm32_qspi_claim_bus(struct udevice *dev)
 473 {
 474         struct stm32_qspi_priv *priv;
 475         struct udevice *bus;
 476         struct spi_flash *flash;
 477
 478         bus = dev->parent;
 479         priv = dev_get_priv(bus);
 480         flash = dev_get_uclass_priv(dev);
 481
 482         _stm32_qspi_set_flash_size(priv, flash->size);
 483
 484         _stm32_qspi_enable(priv);
 485
 486         return 0;
 487 }
 488
 489 static int stm32_qspi_release_bus(struct udevice *dev)
 490 {
 491         struct stm32_qspi_priv *priv;
 492         struct udevice *bus;
 493
 494         bus = dev->parent;
 495         priv = dev_get_priv(bus);
 496
 497         _stm32_qspi_disable(priv);
 498
 499         return 0;
 500 }
 501
 502 static int stm32_qspi_xfer(struct udevice *dev, unsigned int bitlen,
 503                 const void *dout, void *din, unsigned long flags)
 504 {
 505         struct stm32_qspi_priv *priv;
 506         struct udevice *bus;
 507         struct spi_flash *flash;
 508
 509         bus = dev->parent;
 510         priv = dev_get_priv(bus);
 511         flash = dev_get_uclass_priv(dev);
 512
 513         return _stm32_qspi_xfer(priv, flash, bitlen, (const u8 *)dout,
 514                                 (u8 *)din, flags);
 515 }
 516
 517 static int stm32_qspi_set_speed(struct udevice *bus, uint speed)
 518 {
 519         struct stm32_qspi_platdata *plat = bus->platdata;
 520         struct stm32_qspi_priv *priv = dev_get_priv(bus);
 521
 522         if (speed > plat->max_hz)
 523                 speed = plat->max_hz;
 524
 525         u32 qspi_clk = clock_get(CLOCK_AHB);
 526         u32 prescaler = 255;
 527         if (speed > 0) {
 528                 prescaler = DIV_ROUND_UP(qspi_clk, speed) - 1;
 529                 if (prescaler > 255)
 530                         prescaler = 255;
 531                 else if (prescaler < 0)
 532                         prescaler = 0;
 533         }
 534
 535         u32 csht = DIV_ROUND_UP((5 * qspi_clk) / (prescaler + 1), 100000000);
 536         csht = (csht - 1) & STM32_QSPI_DCR_CSHT_MASK;
 537
 538         _stm32_qspi_wait_for_not_busy(priv);
 539
 540         clrsetbits_le32(&priv->regs->cr,
 541                         STM32_QSPI_CR_PRESCALER_MASK <<
 542                         STM32_QSPI_CR_PRESCALER_SHIFT,
 543                         prescaler << STM32_QSPI_CR_PRESCALER_SHIFT);
 544
 545
 546         clrsetbits_le32(&priv->regs->dcr,
 547                         STM32_QSPI_DCR_CSHT_MASK << STM32_QSPI_DCR_CSHT_SHIFT,
 548                         csht << STM32_QSPI_DCR_CSHT_SHIFT);
 549
 550         debug("%s: regs=%p, speed=%d\n", __func__, priv->regs,
 551               (qspi_clk / (prescaler + 1)));
 552
 553         return 0;
 554 }
 555
 556 static int stm32_qspi_set_mode(struct udevice *bus, uint mode)
 557 {
 558         struct stm32_qspi_priv *priv = dev_get_priv(bus);
 559
 560         _stm32_qspi_wait_for_not_busy(priv);
 561
 562         if ((mode & SPI_CPHA) && (mode & SPI_CPOL))
 563                 setbits_le32(&priv->regs->dcr, STM32_QSPI_DCR_CKMODE);
 564         else if (!(mode & SPI_CPHA) && !(mode & SPI_CPOL))
 565                 clrbits_le32(&priv->regs->dcr, STM32_QSPI_DCR_CKMODE);
 566         else
 567                 return -ENODEV;
 568
 569         if (mode & SPI_CS_HIGH)
 570                 return -ENODEV;
 571
 572         if (mode & SPI_RX_QUAD)
 573                 priv->mode |= SPI_RX_QUAD;
 574         else if (mode & SPI_RX_DUAL)
 575                 priv->mode |= SPI_RX_DUAL;
 576         else
 577                 priv->mode &= ~(SPI_RX_QUAD | SPI_RX_DUAL);
 578
 579         if (mode & SPI_TX_QUAD)
 580                 priv->mode |= SPI_TX_QUAD;
 581         else if (mode & SPI_TX_DUAL)
 582                 priv->mode |= SPI_TX_DUAL;
 583         else
 584                 priv->mode &= ~(SPI_TX_QUAD | SPI_TX_DUAL);
 585
 586         debug("%s: regs=%p, mode=%d rx: ", __func__, priv->regs, mode);
 587
 588         if (mode & SPI_RX_QUAD)
 589                 debug("quad, tx: ");
 590         else if (mode & SPI_RX_DUAL)
 591                 debug("dual, tx: ");
 592         else
 593                 debug("single, tx: ");
 594
 595         if (mode & SPI_TX_QUAD)
 596                 debug("quad\n");
 597         else if (mode & SPI_TX_DUAL)
 598                 debug("dual\n");
 599         else
 600                 debug("single\n");
 601
 602         return 0;
 603 }
 604
 605 static const struct dm_spi_ops stm32_qspi_ops = {
 606         .claim_bus      = stm32_qspi_claim_bus,
 607         .release_bus    = stm32_qspi_release_bus,
 608         .xfer           = stm32_qspi_xfer,
 609         .set_speed      = stm32_qspi_set_speed,
 610         .set_mode       = stm32_qspi_set_mode,
 611 };
 612
 613 static const struct udevice_id stm32_qspi_ids[] = {
 614         { .compatible = "st,stm32-qspi" },
 615         { }
 616 };
 617
 618 U_BOOT_DRIVER(stm32_qspi) = {
 619         .name   = "stm32_qspi",
 620         .id     = UCLASS_SPI,
 621         .of_match = stm32_qspi_ids,
 622         .ops    = &stm32_qspi_ops,
 623         .ofdata_to_platdata = stm32_qspi_ofdata_to_platdata,
 624         .platdata_auto_alloc_size = sizeof(struct stm32_qspi_platdata),
 625         .priv_auto_alloc_size = sizeof(struct stm32_qspi_priv),
 626         .probe  = stm32_qspi_probe,
 627         .remove = stm32_qspi_remove,
 628 };