git.sur5r.net Git - u-boot/blob - include/configs/B4860QDS.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   4  */
   5
   6 #ifndef __CONFIG_H
   7 #define __CONFIG_H
   8
   9 /*
  10  * B4860 QDS board configuration file
  11  */
  12 #ifdef CONFIG_RAMBOOT_PBL
  13 #define CONFIG_SYS_FSL_PBL_PBI  $(SRCTREE)/board/freescale/b4860qds/b4_pbi.cfg
  14 #define CONFIG_SYS_FSL_PBL_RCW  $(SRCTREE)/board/freescale/b4860qds/b4_rcw.cfg
  15 #ifndef CONFIG_NAND
  16 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  17 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  18 #else
  19 #define CONFIG_SPL_FLUSH_IMAGE
  20 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  21 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  22 #define CONFIG_SPL_PAD_TO               0x40000
  23 #define CONFIG_SPL_MAX_SIZE             0x28000
  24 #define RESET_VECTOR_OFFSET             0x27FFC
  25 #define BOOT_PAGE_OFFSET                0x27000
  26 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  27 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  28 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  29 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  30 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  31 #define CONFIG_SPL_NAND_BOOT
  32 #ifdef CONFIG_SPL_BUILD
  33 #define CONFIG_SPL_SKIP_RELOCATE
  34 #define CONFIG_SPL_COMMON_INIT_DDR
  35 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  36 #endif
  37 #endif
  38 #endif
  39
  40 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  41 /* Set 1M boot space */
  42 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  43 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  44                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  45 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  46 #endif
  47
  48 /* High Level Configuration Options */
  49 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  50
  51 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  52 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  53 #endif
  54
  55 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  56 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  57 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  58 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  59 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  60
  61 #ifndef CONFIG_ARCH_B4420
  62 #define CONFIG_SYS_SRIO
  63 #define CONFIG_SRIO1                    /* SRIO port 1 */
  64 #define CONFIG_SRIO2                    /* SRIO port 2 */
  65 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  66 #endif
  67
  68 /* I2C bus multiplexer */
  69 #define I2C_MUX_PCA_ADDR                0x77
  70
  71 /* VSC Crossbar switches */
  72 #define CONFIG_VSC_CROSSBAR
  73 #define I2C_CH_DEFAULT                  0x8
  74 #define I2C_CH_VSC3316                  0xc
  75 #define I2C_CH_VSC3308                  0xd
  76
  77 #define VSC3316_TX_ADDRESS              0x70
  78 #define VSC3316_RX_ADDRESS              0x71
  79 #define VSC3308_TX_ADDRESS              0x02
  80 #define VSC3308_RX_ADDRESS              0x03
  81
  82 /* IDT clock synthesizers */
  83 #define CONFIG_IDT8T49N222A
  84 #define I2C_CH_IDT                     0x9
  85
  86 #define IDT_SERDES1_ADDRESS            0x6E
  87 #define IDT_SERDES2_ADDRESS            0x6C
  88
  89 /* Voltage monitor on channel 2*/
  90 #define I2C_MUX_CH_VOL_MONITOR          0xa
  91 #define I2C_VOL_MONITOR_ADDR            0x40
  92 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
  93 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
  94 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
  95
  96 #define CONFIG_ZM7300
  97 #define I2C_MUX_CH_DPM                  0xa
  98 #define I2C_DPM_ADDR                    0x28
  99
 100 #define CONFIG_ENV_OVERWRITE
 101
 102 #ifndef CONFIG_MTD_NOR_FLASH
 103 #else
 104 #define CONFIG_FLASH_CFI_DRIVER
 105 #define CONFIG_SYS_FLASH_CFI
 106 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 107 #endif
 108
 109 #if defined(CONFIG_SPIFLASH)
 110 #define CONFIG_SYS_EXTRA_ENV_RELOC
 111 #define CONFIG_ENV_SPI_BUS              0
 112 #define CONFIG_ENV_SPI_CS               0
 113 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 114 #define CONFIG_ENV_SPI_MODE             0
 115 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 116 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 117 #define CONFIG_ENV_SECT_SIZE            0x10000
 118 #elif defined(CONFIG_SDCARD)
 119 #define CONFIG_SYS_EXTRA_ENV_RELOC
 120 #define CONFIG_SYS_MMC_ENV_DEV          0
 121 #define CONFIG_ENV_SIZE                 0x2000
 122 #define CONFIG_ENV_OFFSET               (512 * 1097)
 123 #elif defined(CONFIG_NAND)
 124 #define CONFIG_SYS_EXTRA_ENV_RELOC
 125 #define CONFIG_ENV_SIZE                 0x2000
 126 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 127 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 128 #define CONFIG_ENV_ADDR         0xffe20000
 129 #define CONFIG_ENV_SIZE         0x2000
 130 #elif defined(CONFIG_ENV_IS_NOWHERE)
 131 #define CONFIG_ENV_SIZE         0x2000
 132 #else
 133 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 134 #define CONFIG_ENV_SIZE         0x2000
 135 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 136 #endif
 137
 138 #ifndef __ASSEMBLY__
 139 unsigned long get_board_sys_clk(void);
 140 unsigned long get_board_ddr_clk(void);
 141 #endif
 142 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
 143 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 144
 145 /*
 146  * These can be toggled for performance analysis, otherwise use default.
 147  */
 148 #define CONFIG_SYS_CACHE_STASHING
 149 #define CONFIG_BTB                      /* toggle branch predition */
 150 #define CONFIG_DDR_ECC
 151 #ifdef CONFIG_DDR_ECC
 152 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 153 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 154 #endif
 155
 156 #define CONFIG_ENABLE_36BIT_PHYS
 157
 158 #ifdef CONFIG_PHYS_64BIT
 159 #define CONFIG_ADDR_MAP
 160 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 161 #endif
 162
 163 #if 0
 164 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 165 #endif
 166 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 167 #define CONFIG_SYS_MEMTEST_END          0x00400000
 168
 169 /*
 170  *  Config the L3 Cache as L3 SRAM
 171  */
 172 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 173 #define CONFIG_SYS_L3_SIZE              256 << 10
 174 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 175 #ifdef CONFIG_NAND
 176 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 177 #endif
 178 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 179 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 180 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 181 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 182
 183 #ifdef CONFIG_PHYS_64BIT
 184 #define CONFIG_SYS_DCSRBAR              0xf0000000
 185 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 186 #endif
 187
 188 /* EEPROM */
 189 #define CONFIG_ID_EEPROM
 190 #define CONFIG_SYS_I2C_EEPROM_NXID
 191 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 192 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 193 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 194 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 195 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 196
 197 /*
 198  * DDR Setup
 199  */
 200 #define CONFIG_VERY_BIG_RAM
 201 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 202 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 203
 204 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 205 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 206
 207 #define CONFIG_DDR_SPD
 208 #define CONFIG_SYS_DDR_RAW_TIMING
 209 #ifndef CONFIG_SPL_BUILD
 210 #define CONFIG_FSL_DDR_INTERACTIVE
 211 #endif
 212
 213 #define CONFIG_SYS_SPD_BUS_NUM  0
 214 #define SPD_EEPROM_ADDRESS1     0x51
 215 #define SPD_EEPROM_ADDRESS2     0x53
 216
 217 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
 218 #define CONFIG_SYS_SDRAM_SIZE   2048    /* for fixed parameter use */
 219
 220 /*
 221  * IFC Definitions
 222  */
 223 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 224 #ifdef CONFIG_PHYS_64BIT
 225 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 226 #else
 227 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 228 #endif
 229
 230 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 231 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 232                                 + 0x8000000) | \
 233                                 CSPR_PORT_SIZE_16 | \
 234                                 CSPR_MSEL_NOR | \
 235                                 CSPR_V)
 236 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 237 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 238                                 CSPR_PORT_SIZE_16 | \
 239                                 CSPR_MSEL_NOR | \
 240                                 CSPR_V)
 241 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128 * 1024 * 1024)
 242 /* NOR Flash Timing Params */
 243 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(4)
 244 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x01) | \
 245                                 FTIM0_NOR_TEADC(0x04) | \
 246                                 FTIM0_NOR_TEAHC(0x20))
 247 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 248                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 249                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 250 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x01) | \
 251                                 FTIM2_NOR_TCH(0x0E) | \
 252                                 FTIM2_NOR_TWPH(0x0E) | \
 253                                 FTIM2_NOR_TWP(0x1c))
 254 #define CONFIG_SYS_NOR_FTIM3    0x0
 255
 256 #define CONFIG_SYS_FLASH_QUIET_TEST
 257 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 258
 259 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 260 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 261 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 262 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 263
 264 #define CONFIG_SYS_FLASH_EMPTY_INFO
 265 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 266                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 267
 268 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 269 #define CONFIG_FSL_QIXIS_V2
 270 #define QIXIS_BASE              0xffdf0000
 271 #ifdef CONFIG_PHYS_64BIT
 272 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 273 #else
 274 #define QIXIS_BASE_PHYS         QIXIS_BASE
 275 #endif
 276 #define QIXIS_LBMAP_SWITCH              0x01
 277 #define QIXIS_LBMAP_MASK                0x0f
 278 #define QIXIS_LBMAP_SHIFT               0
 279 #define QIXIS_LBMAP_DFLTBANK            0x00
 280 #define QIXIS_LBMAP_ALTBANK             0x02
 281 #define QIXIS_RST_CTL_RESET             0x31
 282 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 283 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 284 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 285
 286 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 287 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 288                                 | CSPR_PORT_SIZE_8 \
 289                                 | CSPR_MSEL_GPCM \
 290                                 | CSPR_V)
 291 #define CONFIG_SYS_AMASK3       IFC_AMASK(4 * 1024)
 292 #define CONFIG_SYS_CSOR3        0x0
 293 /* QIXIS Timing parameters for IFC CS3 */
 294 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 295                                         FTIM0_GPCM_TEADC(0x0e) | \
 296                                         FTIM0_GPCM_TEAHC(0x0e))
 297 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 298                                         FTIM1_GPCM_TRAD(0x1f))
 299 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 300                                         FTIM2_GPCM_TCH(0x8) | \
 301                                         FTIM2_GPCM_TWP(0x1f))
 302 #define CONFIG_SYS_CS3_FTIM3            0x0
 303
 304 /* NAND Flash on IFC */
 305 #define CONFIG_NAND_FSL_IFC
 306 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 307 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 308 #define CONFIG_SYS_NAND_BASE            0xff800000
 309 #ifdef CONFIG_PHYS_64BIT
 310 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 311 #else
 312 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 313 #endif
 314
 315 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 316 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 317                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 318                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 319                                 | CSPR_V)
 320 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
 321
 322 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 323                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 324                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 325                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 326                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 327                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 328                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 329
 330 #define CONFIG_SYS_NAND_ONFI_DETECTION
 331
 332 /* ONFI NAND Flash mode0 Timing Params */
 333 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 334                                         FTIM0_NAND_TWP(0x18)   | \
 335                                         FTIM0_NAND_TWCHT(0x07) | \
 336                                         FTIM0_NAND_TWH(0x0a))
 337 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 338                                         FTIM1_NAND_TWBE(0x39)  | \
 339                                         FTIM1_NAND_TRR(0x0e)   | \
 340                                         FTIM1_NAND_TRP(0x18))
 341 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 342                                         FTIM2_NAND_TREH(0x0a) | \
 343                                         FTIM2_NAND_TWHRE(0x1e))
 344 #define CONFIG_SYS_NAND_FTIM3           0x0
 345
 346 #define CONFIG_SYS_NAND_DDR_LAW         11
 347
 348 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 349 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 350
 351 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 352
 353 #if defined(CONFIG_NAND)
 354 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 355 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 356 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 357 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 358 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 359 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 360 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 361 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 362 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 363 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 364 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 365 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 366 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 367 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 368 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 369 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 370 #else
 371 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 372 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 373 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 374 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 375 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 376 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 377 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 378 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 379 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 380 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 381 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 382 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 383 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 384 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 385 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 386 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 387 #endif
 388 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 389 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 390 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 391 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 392 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 393 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 394 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 395 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 396
 397 #ifdef CONFIG_SPL_BUILD
 398 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 399 #else
 400 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 401 #endif
 402
 403 #if defined(CONFIG_RAMBOOT_PBL)
 404 #define CONFIG_SYS_RAMBOOT
 405 #endif
 406
 407 #define CONFIG_MISC_INIT_R
 408
 409 #define CONFIG_HWCONFIG
 410
 411 /* define to use L1 as initial stack */
 412 #define CONFIG_L1_INIT_RAM
 413 #define CONFIG_SYS_INIT_RAM_LOCK
 414 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 415 #ifdef CONFIG_PHYS_64BIT
 416 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 417 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 418 /* The assembler doesn't like typecast */
 419 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 420         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 421           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 422 #else
 423 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe03c000 /* Initial L1 address */
 424 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 425 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 426 #endif
 427 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 428
 429 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 430                                         GENERATED_GBL_DATA_SIZE)
 431 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 432
 433 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 434 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 435
 436 /* Serial Port - controlled on board with jumper J8
 437  * open - index 2
 438  * shorted - index 1
 439  */
 440 #define CONFIG_SYS_NS16550_SERIAL
 441 #define CONFIG_SYS_NS16550_REG_SIZE     1
 442 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 443
 444 #define CONFIG_SYS_BAUDRATE_TABLE       \
 445         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 446
 447 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 448 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 449 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 450 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 451
 452 /* I2C */
 453 #define CONFIG_SYS_I2C
 454 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 455 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 456 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 457 #define CONFIG_SYS_FSL_I2C2_SPEED       400000  /* I2C speed in Hz */
 458 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 459 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 460 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x119000
 461
 462 /*
 463  * RTC configuration
 464  */
 465 #define RTC
 466 #define CONFIG_RTC_DS3231               1
 467 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 468
 469 /*
 470  * RapidIO
 471  */
 472 #ifdef CONFIG_SYS_SRIO
 473 #ifdef CONFIG_SRIO1
 474 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 475 #ifdef CONFIG_PHYS_64BIT
 476 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 477 #else
 478 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 479 #endif
 480 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 481 #endif
 482
 483 #ifdef CONFIG_SRIO2
 484 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 485 #ifdef CONFIG_PHYS_64BIT
 486 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 487 #else
 488 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 489 #endif
 490 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 491 #endif
 492 #endif
 493
 494 /*
 495  * for slave u-boot IMAGE instored in master memory space,
 496  * PHYS must be aligned based on the SIZE
 497  */
 498 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 499 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 500 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 501 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 502 /*
 503  * for slave UCODE and ENV instored in master memory space,
 504  * PHYS must be aligned based on the SIZE
 505  */
 506 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 507 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 508 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 509
 510 /* slave core release by master*/
 511 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 512 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 513
 514 /*
 515  * SRIO_PCIE_BOOT - SLAVE
 516  */
 517 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 518 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 519 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 520                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 521 #endif
 522
 523 /*
 524  * eSPI - Enhanced SPI
 525  */
 526 #define CONFIG_SF_DEFAULT_SPEED         10000000
 527 #define CONFIG_SF_DEFAULT_MODE          0
 528
 529 /*
 530  * MAPLE
 531  */
 532 #ifdef CONFIG_PHYS_64BIT
 533 #define CONFIG_SYS_MAPLE_MEM_PHYS      0xFA0000000ull
 534 #else
 535 #define CONFIG_SYS_MAPLE_MEM_PHYS      0xA0000000
 536 #endif
 537
 538 /*
 539  * General PCI
 540  * Memory space is mapped 1-1, but I/O space must start from 0.
 541  */
 542
 543 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 544 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 545 #ifdef CONFIG_PHYS_64BIT
 546 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 547 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 548 #else
 549 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 550 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 551 #endif
 552 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 553 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 554 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 555 #ifdef CONFIG_PHYS_64BIT
 556 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 557 #else
 558 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 559 #endif
 560 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 561
 562 /* Qman/Bman */
 563 #ifndef CONFIG_NOBQFMAN
 564 #define CONFIG_SYS_BMAN_NUM_PORTALS     25
 565 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 566 #ifdef CONFIG_PHYS_64BIT
 567 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 568 #else
 569 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 570 #endif
 571 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 572 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 573 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 574 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 575 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 576 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 577                                         CONFIG_SYS_BMAN_CENA_SIZE)
 578 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 579 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 580 #define CONFIG_SYS_QMAN_NUM_PORTALS     25
 581 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 582 #ifdef CONFIG_PHYS_64BIT
 583 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 584 #else
 585 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 586 #endif
 587 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 588 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 589 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 590 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 591 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 592 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 593                                         CONFIG_SYS_QMAN_CENA_SIZE)
 594 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 595 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 596
 597 #define CONFIG_SYS_DPAA_FMAN
 598
 599 #define CONFIG_SYS_DPAA_RMAN
 600
 601 /* Default address of microcode for the Linux Fman driver */
 602 #if defined(CONFIG_SPIFLASH)
 603 /*
 604  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 605  * env, so we got 0x110000.
 606  */
 607 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 608 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 609 #elif defined(CONFIG_SDCARD)
 610 /*
 611  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 612  * about 545KB (1089 blocks), Env is stored after the image, and the env size is
 613  * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
 614  */
 615 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 616 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1130)
 617 #elif defined(CONFIG_NAND)
 618 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 619 #define CONFIG_SYS_FMAN_FW_ADDR (13 * CONFIG_SYS_NAND_BLOCK_SIZE)
 620 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 621 /*
 622  * Slave has no ucode locally, it can fetch this from remote. When implementing
 623  * in two corenet boards, slave's ucode could be stored in master's memory
 624  * space, the address can be mapped from slave TLB->slave LAW->
 625  * slave SRIO or PCIE outbound window->master inbound window->
 626  * master LAW->the ucode address in master's memory space.
 627  */
 628 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 629 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 630 #else
 631 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 632 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 633 #endif
 634 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 635 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 636 #endif /* CONFIG_NOBQFMAN */
 637
 638 #ifdef CONFIG_SYS_DPAA_FMAN
 639 #define CONFIG_FMAN_ENET
 640 #define CONFIG_PHYLIB_10G
 641 #define CONFIG_PHY_VITESSE
 642 #define CONFIG_PHY_TERANETICS
 643 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 644 #define SGMII_CARD_PORT2_PHY_ADDR 0x10
 645 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 646 #define SGMII_CARD_PORT4_PHY_ADDR 0x11
 647 #endif
 648
 649 #ifdef CONFIG_PCI
 650 #define CONFIG_PCI_INDIRECT_BRIDGE
 651
 652 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 653 #endif  /* CONFIG_PCI */
 654
 655 #ifdef CONFIG_FMAN_ENET
 656 #define CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR 0x10
 657 #define CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR 0x11
 658
 659 /*B4860 QDS AMC2PEX-2S default PHY_ADDR */
 660 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0x7       /*SLOT 1*/
 661 #define CONFIG_SYS_FM1_10GEC2_PHY_ADDR 0x6       /*SLOT 2*/
 662
 663 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 664 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
 665 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
 666 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
 667
 668 #define CONFIG_MII              /* MII PHY management */
 669 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 670 #endif
 671
 672 #define CONFIG_SYS_FSL_B4860QDS_XFI_ERR
 673
 674 /*
 675  * Environment
 676  */
 677 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 678 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 679
 680 /*
 681 * USB
 682 */
 683 #define CONFIG_HAS_FSL_DR_USB
 684
 685 #ifdef CONFIG_HAS_FSL_DR_USB
 686 #ifdef CONFIG_USB_EHCI_HCD
 687 #define CONFIG_USB_EHCI_FSL
 688 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 689 #endif
 690 #endif
 691
 692 /*
 693  * Miscellaneous configurable options
 694  */
 695 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 696
 697 /*
 698  * For booting Linux, the board info and command line data
 699  * have to be in the first 64 MB of memory, since this is
 700  * the maximum mapped by the Linux kernel during initialization.
 701  */
 702 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 703 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 704
 705 #ifdef CONFIG_CMD_KGDB
 706 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 707 #endif
 708
 709 /*
 710  * Environment Configuration
 711  */
 712 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 713 #define CONFIG_BOOTFILE         "uImage"
 714 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 715
 716 /* default location for tftp and bootm */
 717 #define CONFIG_LOADADDR         1000000
 718
 719 #define __USB_PHY_TYPE  ulpi
 720
 721 #ifdef CONFIG_ARCH_B4860
 722 #define HWCONFIG        "hwconfig=fsl_ddr:ctlr_intlv=null,"     \
 723                         "bank_intlv=cs0_cs1;"   \
 724                         "en_cpc:cpc2;"
 725 #else
 726 #define HWCONFIG        "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;"
 727 #endif
 728
 729 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 730         HWCONFIG                                                \
 731         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 732         "netdev=eth0\0"                                         \
 733         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 734         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"                     \
 735         "tftpflash=tftpboot $loadaddr $uboot && "               \
 736         "protect off $ubootaddr +$filesize && "                 \
 737         "erase $ubootaddr +$filesize && "                       \
 738         "cp.b $loadaddr $ubootaddr $filesize && "               \
 739         "protect on $ubootaddr +$filesize && "                  \
 740         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 741         "consoledev=ttyS0\0"                                    \
 742         "ramdiskaddr=2000000\0"                                 \
 743         "ramdiskfile=b4860qds/ramdisk.uboot\0"                  \
 744         "fdtaddr=1e00000\0"                                     \
 745         "fdtfile=b4860qds/b4860qds.dtb\0"                               \
 746         "bdev=sda3\0"
 747
 748 /* For emulation this causes u-boot to jump to the start of the proof point
 749    app code automatically */
 750 #define CONFIG_PROOF_POINTS                     \
 751  "setenv bootargs root=/dev/$bdev rw "          \
 752  "console=$consoledev,$baudrate $othbootargs;"  \
 753  "cpu 1 release 0x29000000 - - -;"              \
 754  "cpu 2 release 0x29000000 - - -;"              \
 755  "cpu 3 release 0x29000000 - - -;"              \
 756  "cpu 4 release 0x29000000 - - -;"              \
 757  "cpu 5 release 0x29000000 - - -;"              \
 758  "cpu 6 release 0x29000000 - - -;"              \
 759  "cpu 7 release 0x29000000 - - -;"              \
 760  "go 0x29000000"
 761
 762 #define CONFIG_HVBOOT   \
 763  "setenv bootargs config-addr=0x60000000; "     \
 764  "bootm 0x01000000 - 0x00f00000"
 765
 766 #define CONFIG_ALU                              \
 767  "setenv bootargs root=/dev/$bdev rw "          \
 768  "console=$consoledev,$baudrate $othbootargs;"  \
 769  "cpu 1 release 0x01000000 - - -;"              \
 770  "cpu 2 release 0x01000000 - - -;"              \
 771  "cpu 3 release 0x01000000 - - -;"              \
 772  "cpu 4 release 0x01000000 - - -;"              \
 773  "cpu 5 release 0x01000000 - - -;"              \
 774  "cpu 6 release 0x01000000 - - -;"              \
 775  "cpu 7 release 0x01000000 - - -;"              \
 776  "go 0x01000000"
 777
 778 #define CONFIG_LINUX                            \
 779  "setenv bootargs root=/dev/ram rw "            \
 780  "console=$consoledev,$baudrate $othbootargs;"  \
 781  "setenv ramdiskaddr 0x02000000;"               \
 782  "setenv fdtaddr 0x01e00000;"                   \
 783  "setenv loadaddr 0x1000000;"                   \
 784  "bootm $loadaddr $ramdiskaddr $fdtaddr"
 785
 786 #define CONFIG_HDBOOT                                   \
 787         "setenv bootargs root=/dev/$bdev rw "           \
 788         "console=$consoledev,$baudrate $othbootargs;"   \
 789         "tftp $loadaddr $bootfile;"                     \
 790         "tftp $fdtaddr $fdtfile;"                       \
 791         "bootm $loadaddr - $fdtaddr"
 792
 793 #define CONFIG_NFSBOOTCOMMAND                   \
 794         "setenv bootargs root=/dev/nfs rw "     \
 795         "nfsroot=$serverip:$rootpath "          \
 796         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 797         "console=$consoledev,$baudrate $othbootargs;"   \
 798         "tftp $loadaddr $bootfile;"             \
 799         "tftp $fdtaddr $fdtfile;"               \
 800         "bootm $loadaddr - $fdtaddr"
 801
 802 #define CONFIG_RAMBOOTCOMMAND                           \
 803         "setenv bootargs root=/dev/ram rw "             \
 804         "console=$consoledev,$baudrate $othbootargs;"   \
 805         "tftp $ramdiskaddr $ramdiskfile;"               \
 806         "tftp $loadaddr $bootfile;"                     \
 807         "tftp $fdtaddr $fdtfile;"                       \
 808         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 809
 810 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 811
 812 #include <asm/fsl_secure_boot.h>
 813
 814 #endif  /* __CONFIG_H */