git.sur5r.net Git - u-boot/blob - include/configs/BSC9132QDS.h

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * BSC9132 QDS board configuration file
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #define CONFIG_MISC_INIT_R
  15
  16 #ifdef CONFIG_SDCARD
  17 #define CONFIG_RAMBOOT_SDCARD
  18 #define CONFIG_SYS_RAMBOOT
  19 #define CONFIG_SYS_EXTRA_ENV_RELOC
  20 #define CONFIG_SYS_TEXT_BASE            0x11000000
  21 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  22 #endif
  23 #ifdef CONFIG_SPIFLASH
  24 #define CONFIG_RAMBOOT_SPIFLASH
  25 #define CONFIG_SYS_RAMBOOT
  26 #define CONFIG_SYS_EXTRA_ENV_RELOC
  27 #define CONFIG_SYS_TEXT_BASE            0x11000000
  28 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  29 #endif
  30 #ifdef CONFIG_NAND_SECBOOT
  31 #define CONFIG_RAMBOOT_NAND
  32 #define CONFIG_SYS_RAMBOOT
  33 #define CONFIG_SYS_EXTRA_ENV_RELOC
  34 #define CONFIG_SYS_TEXT_BASE            0x11000000
  35 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  36 #endif
  37
  38 #ifdef CONFIG_NAND
  39 #define CONFIG_SPL_INIT_MINIMAL
  40 #define CONFIG_SPL_NAND_BOOT
  41 #define CONFIG_SPL_FLUSH_IMAGE
  42 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  43
  44 #define CONFIG_SYS_TEXT_BASE            0x00201000
  45 #define CONFIG_SPL_TEXT_BASE            0xFFFFE000
  46 #define CONFIG_SPL_MAX_SIZE             8192
  47 #define CONFIG_SPL_RELOC_TEXT_BASE      0x00100000
  48 #define CONFIG_SPL_RELOC_STACK          0x00100000
  49 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) - 0x2000)
  50 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x00200000 - CONFIG_SPL_MAX_SIZE)
  51 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  52 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0
  53 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  54 #endif
  55
  56 #ifndef CONFIG_SYS_TEXT_BASE
  57 #define CONFIG_SYS_TEXT_BASE            0x8ff40000
  58 #endif
  59
  60 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  61 #define CONFIG_RESET_VECTOR_ADDRESS     0x8ffffffc
  62 #endif
  63
  64 #ifdef CONFIG_SPL_BUILD
  65 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
  66 #else
  67 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  68 #endif
  69
  70 /* High Level Configuration Options */
  71 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  72 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  73 #define CONFIG_SYS_HAS_SERDES           /* common SERDES init code */
  74
  75 #if defined(CONFIG_PCI)
  76 #define CONFIG_PCIE1                    /* PCIE controller 1 (slot 1) */
  77 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  78 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
  79 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata */
  80 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  81
  82 #define CONFIG_CMD_PCI
  83
  84 /*
  85  * PCI Windows
  86  * Memory space is mapped 1-1, but I/O space must start from 0.
  87  */
  88 /* controller 1, Slot 1, tgtid 1, Base address a000 */
  89 #define CONFIG_SYS_PCIE1_NAME           "PCIe Slot"
  90 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x90000000
  91 #define CONFIG_SYS_PCIE1_MEM_BUS        0x90000000
  92 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x90000000
  93 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
  94 #define CONFIG_SYS_PCIE1_IO_VIRT        0xC0010000
  95 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
  96 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
  97 #define CONFIG_SYS_PCIE1_IO_PHYS        0xC0010000
  98
  99 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 100 #endif
 101
 102 #define CONFIG_ENV_OVERWRITE
 103 #define CONFIG_TSEC_ENET /* ethernet */
 104
 105 #if defined(CONFIG_SYS_CLK_100_DDR_100)
 106 #define CONFIG_SYS_CLK_FREQ     100000000
 107 #define CONFIG_DDR_CLK_FREQ     100000000
 108 #elif defined(CONFIG_SYS_CLK_100_DDR_133)
 109 #define CONFIG_SYS_CLK_FREQ     100000000
 110 #define CONFIG_DDR_CLK_FREQ     133000000
 111 #endif
 112
 113 #define CONFIG_MP
 114
 115 #define CONFIG_HWCONFIG
 116 /*
 117  * These can be toggled for performance analysis, otherwise use default.
 118  */
 119 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
 120 #define CONFIG_BTB                      /* enable branch predition */
 121
 122 #define CONFIG_SYS_MEMTEST_START        0x01000000      /* memtest works on */
 123 #define CONFIG_SYS_MEMTEST_END          0x01ffffff
 124
 125 /* DDR Setup */
 126 #define CONFIG_SYS_SPD_BUS_NUM          0
 127 #define SPD_EEPROM_ADDRESS1             0x54 /* I2C access */
 128 #define SPD_EEPROM_ADDRESS2             0x56 /* I2C access */
 129 #define CONFIG_FSL_DDR_INTERACTIVE
 130
 131 #define CONFIG_MEM_INIT_VALUE           0xDeadBeef
 132
 133 #define CONFIG_SYS_SDRAM_SIZE           (1024)
 134 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 135 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 136
 137 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 138
 139 /* DDR3 Controller Settings */
 140 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
 141 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003F
 142 #define CONFIG_SYS_DDR_CS0_CONFIG_1333  0x80004302
 143 #define CONFIG_SYS_DDR_CS0_CONFIG_800   0x80014302
 144 #define CONFIG_SYS_DDR_CS0_CONFIG_2     0x00000000
 145 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 146 #define CONFIG_SYS_DDR_INIT_ADDR        0x00000000
 147 #define CONFIG_SYS_DDR_INIT_EXT_ADDR    0x00000000
 148 #define CONFIG_SYS_DDR_MODE_CONTROL     0x00000000
 149 #define CONFIG_SYS_DDR1_CS0_BNDS       0x0040007F
 150
 151 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 152 #define CONFIG_SYS_DDR_SR_CNTR          0x00000000
 153 #define CONFIG_SYS_DDR_RCW_1            0x00000000
 154 #define CONFIG_SYS_DDR_RCW_2            0x00000000
 155 #define CONFIG_SYS_DDR_CONTROL_800              0x470C0000
 156 #define CONFIG_SYS_DDR_CONTROL_2_800    0x04401050
 157 #define CONFIG_SYS_DDR_TIMING_4_800             0x00220001
 158 #define CONFIG_SYS_DDR_TIMING_5_800             0x03402400
 159
 160 #define CONFIG_SYS_DDR_CONTROL_1333             0x470C0008
 161 #define CONFIG_SYS_DDR_CONTROL_2_1333   0x24401010
 162 #define CONFIG_SYS_DDR_TIMING_4_1333            0x00000001
 163 #define CONFIG_SYS_DDR_TIMING_5_1333            0x03401400
 164
 165 #define CONFIG_SYS_DDR_TIMING_3_800             0x00020000
 166 #define CONFIG_SYS_DDR_TIMING_0_800             0x00330004
 167 #define CONFIG_SYS_DDR_TIMING_1_800             0x6f6B4846
 168 #define CONFIG_SYS_DDR_TIMING_2_800             0x0FA8C8CF
 169 #define CONFIG_SYS_DDR_CLK_CTRL_800             0x03000000
 170 #define CONFIG_SYS_DDR_MODE_1_800               0x40461520
 171 #define CONFIG_SYS_DDR_MODE_2_800               0x8000c000
 172 #define CONFIG_SYS_DDR_INTERVAL_800             0x0C300000
 173 #define CONFIG_SYS_DDR_WRLVL_CONTROL_800        0x8655A608
 174
 175 #define CONFIG_SYS_DDR_TIMING_3_1333            0x01061000
 176 #define CONFIG_SYS_DDR_TIMING_0_1333            0x00440104
 177 #define CONFIG_SYS_DDR_TIMING_1_1333            0x98913A45
 178 #define CONFIG_SYS_DDR_TIMING_2_1333            0x0FB8B114
 179 #define CONFIG_SYS_DDR_CLK_CTRL_1333            0x02800000
 180 #define CONFIG_SYS_DDR_MODE_1_1333              0x00061A50
 181 #define CONFIG_SYS_DDR_MODE_2_1333              0x00100000
 182 #define CONFIG_SYS_DDR_INTERVAL_1333            0x144E0513
 183 #define CONFIG_SYS_DDR_WRLVL_CONTROL_1333       0x8655F607
 184
 185 /*FIXME: the following params are constant w.r.t diff freq
 186 combinations. this should be removed later
 187 */
 188 #if CONFIG_DDR_CLK_FREQ == 100000000
 189 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800
 190 #define CONFIG_SYS_DDR_CONTROL          CONFIG_SYS_DDR_CONTROL_800
 191 #define CONFIG_SYS_DDR_CONTROL_2 CONFIG_SYS_DDR_CONTROL_2_800
 192 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_800
 193 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_800
 194 #elif CONFIG_DDR_CLK_FREQ == 133000000
 195 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_1333
 196 #define CONFIG_SYS_DDR_CONTROL          CONFIG_SYS_DDR_CONTROL_1333
 197 #define CONFIG_SYS_DDR_CONTROL_2        CONFIG_SYS_DDR_CONTROL_2_1333
 198 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_1333
 199 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_1333
 200 #else
 201 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800
 202 #define CONFIG_SYS_DDR_CONTROL          CONFIG_SYS_DDR_CONTROL_800
 203 #define CONFIG_SYS_DDR_CONTROL_2        CONFIG_SYS_DDR_CONTROL_2_800
 204 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_800
 205 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_800
 206 #endif
 207
 208 /* relocated CCSRBAR */
 209 #define CONFIG_SYS_CCSRBAR      CONFIG_SYS_CCSRBAR_DEFAULT
 210 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR_DEFAULT
 211
 212 #define CONFIG_SYS_IMMR         CONFIG_SYS_CCSRBAR
 213
 214 /* DSP CCSRBAR */
 215 #define CONFIG_SYS_FSL_DSP_CCSRBAR      CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
 216 #define CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
 217
 218 /*
 219  * IFC Definitions
 220  */
 221 /* NOR Flash on IFC */
 222
 223 #ifdef CONFIG_SPL_BUILD
 224 #define CONFIG_SYS_NO_FLASH
 225 #endif
 226 #define CONFIG_SYS_FLASH_BASE           0x88000000
 227 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* Max number of sector: 32M */
 228
 229 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 230
 231 #define CONFIG_SYS_NOR_CSPR     0x88000101
 232 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 233 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(5)
 234 /* NOR Flash Timing Params */
 235
 236 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x01) \
 237                                 | FTIM0_NOR_TEADC(0x03) \
 238                                 | FTIM0_NOR_TAVDS(0x00) \
 239                                 | FTIM0_NOR_TEAHC(0x0f))
 240 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x1d) \
 241                                 | FTIM1_NOR_TRAD_NOR(0x09) \
 242                                 | FTIM1_NOR_TSEQRAD_NOR(0x09))
 243 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x1) \
 244                                 | FTIM2_NOR_TCH(0x4) \
 245                                 | FTIM2_NOR_TWPH(0x7) \
 246                                 | FTIM2_NOR_TWP(0x1e))
 247 #define CONFIG_SYS_NOR_FTIM3    0x0
 248
 249 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 250 #define CONFIG_SYS_FLASH_QUIET_TEST
 251 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 252 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 253
 254 #undef CONFIG_SYS_FLASH_CHECKSUM
 255 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 256 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 257
 258 /* CFI for NOR Flash */
 259 #define CONFIG_FLASH_CFI_DRIVER
 260 #define CONFIG_SYS_FLASH_CFI
 261 #define CONFIG_SYS_FLASH_EMPTY_INFO
 262 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 263
 264 /* NAND Flash on IFC */
 265 #define CONFIG_SYS_NAND_BASE            0xff800000
 266 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 267
 268 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 269                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 270                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 271                                 | CSPR_V)
 272 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 273
 274 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 275                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 276                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 277                                 | CSOR_NAND_RAL_2       /* RAL = 2Byes */ \
 278                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 279                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 280                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 281
 282 /* NAND Flash Timing Params */
 283 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x03) \
 284                                         | FTIM0_NAND_TWP(0x05) \
 285                                         | FTIM0_NAND_TWCHT(0x02) \
 286                                         | FTIM0_NAND_TWH(0x04))
 287 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x1c) \
 288                                         | FTIM1_NAND_TWBE(0x1e) \
 289                                         | FTIM1_NAND_TRR(0x07) \
 290                                         | FTIM1_NAND_TRP(0x05))
 291 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x08) \
 292                                         | FTIM2_NAND_TREH(0x04) \
 293                                         | FTIM2_NAND_TWHRE(0x11))
 294 #define CONFIG_SYS_NAND_FTIM3           FTIM3_NAND_TWW(0x04)
 295
 296 #define CONFIG_SYS_NAND_DDR_LAW         11
 297
 298 /* NAND */
 299 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 300 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 301 #define CONFIG_CMD_NAND
 302
 303 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 304
 305 #ifndef CONFIG_SPL_BUILD
 306 #define CONFIG_FSL_QIXIS
 307 #endif
 308 #ifdef CONFIG_FSL_QIXIS
 309 #define CONFIG_SYS_FPGA_BASE    0xffb00000
 310 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
 311 #define QIXIS_BASE      CONFIG_SYS_FPGA_BASE
 312 #define QIXIS_LBMAP_SWITCH      9
 313 #define QIXIS_LBMAP_MASK        0x07
 314 #define QIXIS_LBMAP_SHIFT       0
 315 #define QIXIS_LBMAP_DFLTBANK            0x00
 316 #define QIXIS_LBMAP_ALTBANK             0x04
 317 #define QIXIS_RST_CTL_RESET             0x83
 318 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 319 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 320 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 321
 322 #define CONFIG_SYS_FPGA_BASE_PHYS       CONFIG_SYS_FPGA_BASE
 323
 324 #define CONFIG_SYS_CSPR2                (CSPR_PHYS_ADDR(CONFIG_SYS_FPGA_BASE) \
 325                                         | CSPR_PORT_SIZE_8 \
 326                                         | CSPR_MSEL_GPCM \
 327                                         | CSPR_V)
 328 #define CONFIG_SYS_AMASK2               IFC_AMASK(64*1024)
 329 #define CONFIG_SYS_CSOR2                0x0
 330 /* CPLD Timing parameters for IFC CS3 */
 331 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 332                                         FTIM0_GPCM_TEADC(0x0e) | \
 333                                         FTIM0_GPCM_TEAHC(0x0e))
 334 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 335                                         FTIM1_GPCM_TRAD(0x1f))
 336 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 337                                         FTIM2_GPCM_TCH(0x8) | \
 338                                         FTIM2_GPCM_TWP(0x1f))
 339 #define CONFIG_SYS_CS2_FTIM3            0x0
 340 #endif
 341
 342 /* Set up IFC registers for boot location NOR/NAND */
 343 #if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT)
 344 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 345 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 346 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 347 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 348 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 349 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 350 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 351 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 352 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 353 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 354 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 355 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 356 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 357 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 358 #else
 359 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 360 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 361 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 362 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 363 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 364 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 365 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 366 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 367 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 368 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 369 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 370 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 371 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 372 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 373 #endif
 374
 375 #define CONFIG_BOARD_EARLY_INIT_R
 376
 377 #define CONFIG_SYS_INIT_RAM_LOCK
 378 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* stack in RAM */
 379 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000 /* End of used area in RAM */
 380
 381 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE \
 382                                                 - GENERATED_GBL_DATA_SIZE)
 383 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 384
 385 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 386 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc*/
 387
 388 /* Serial Port */
 389 #define CONFIG_CONS_INDEX       1
 390 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 391 #define CONFIG_SYS_NS16550_SERIAL
 392 #define CONFIG_SYS_NS16550_REG_SIZE     1
 393 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 394 #ifdef CONFIG_SPL_BUILD
 395 #define CONFIG_NS16550_MIN_FUNCTIONS
 396 #endif
 397
 398 #define CONFIG_SYS_BAUDRATE_TABLE       \
 399         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 400
 401 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500)
 402 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600)
 403 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR + 0x4700)
 404 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR + 0x4800)
 405
 406 #define CONFIG_SYS_I2C
 407 #define CONFIG_SYS_I2C_FSL
 408 #define CONFIG_SYS_FSL_I2C_SPEED        400800 /* I2C speed and slave address*/
 409 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 410 #define CONFIG_SYS_FSL_I2C2_SPEED       400800 /* I2C speed and slave address*/
 411 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 412 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 413 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 414
 415 /* I2C EEPROM */
 416 #define CONFIG_ID_EEPROM
 417 #ifdef CONFIG_ID_EEPROM
 418 #define CONFIG_SYS_I2C_EEPROM_NXID
 419 #endif
 420 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 421 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 422 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 423
 424 /* enable read and write access to EEPROM */
 425 #define CONFIG_CMD_EEPROM
 426 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 427 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 428 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 429
 430 /* I2C FPGA */
 431 #define CONFIG_I2C_FPGA
 432 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
 433
 434 #define CONFIG_RTC_DS3231
 435 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 436
 437 /*
 438  * SPI interface will not be available in case of NAND boot SPI CS0 will be
 439  * used for SLIC
 440  */
 441 /* eSPI - Enhanced SPI */
 442 #ifdef CONFIG_FSL_ESPI
 443 #define CONFIG_SF_DEFAULT_SPEED         10000000
 444 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 445 #endif
 446
 447 #if defined(CONFIG_TSEC_ENET)
 448
 449 #define CONFIG_MII                      /* MII PHY management */
 450 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 451 #define CONFIG_TSEC1    1
 452 #define CONFIG_TSEC1_NAME       "eTSEC1"
 453 #define CONFIG_TSEC2    1
 454 #define CONFIG_TSEC2_NAME       "eTSEC2"
 455
 456 #define TSEC1_PHY_ADDR          0
 457 #define TSEC2_PHY_ADDR          1
 458
 459 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 460 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 461
 462 #define TSEC1_PHYIDX            0
 463 #define TSEC2_PHYIDX            0
 464
 465 #define CONFIG_ETHPRIME         "eTSEC1"
 466
 467 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 468
 469 /* TBI PHY configuration for SGMII mode */
 470 #define CONFIG_TSEC_TBICR_SETTINGS ( \
 471                 TBICR_PHY_RESET \
 472                 | TBICR_ANEG_ENABLE \
 473                 | TBICR_FULL_DUPLEX \
 474                 | TBICR_SPEED1_SET \
 475                 )
 476
 477 #endif  /* CONFIG_TSEC_ENET */
 478
 479 #ifdef CONFIG_MMC
 480 #define CONFIG_FSL_ESDHC
 481 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 482 #endif
 483
 484 #define CONFIG_USB_EHCI  /* USB */
 485 #ifdef CONFIG_USB_EHCI
 486 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 487 #define CONFIG_USB_EHCI_FSL
 488 #define CONFIG_HAS_FSL_DR_USB
 489 #endif
 490
 491 /*
 492  * Environment
 493  */
 494 #if defined(CONFIG_RAMBOOT_SDCARD)
 495 #define CONFIG_ENV_IS_IN_MMC
 496 #define CONFIG_FSL_FIXED_MMC_LOCATION
 497 #define CONFIG_SYS_MMC_ENV_DEV          0
 498 #define CONFIG_ENV_SIZE                 0x2000
 499 #elif defined(CONFIG_RAMBOOT_SPIFLASH)
 500 #define CONFIG_ENV_IS_IN_SPI_FLASH
 501 #define CONFIG_ENV_SPI_BUS      0
 502 #define CONFIG_ENV_SPI_CS       0
 503 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 504 #define CONFIG_ENV_SPI_MODE     0
 505 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 506 #define CONFIG_ENV_SECT_SIZE    0x10000
 507 #define CONFIG_ENV_SIZE         0x2000
 508 #elif defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT)
 509 #define CONFIG_ENV_IS_IN_NAND
 510 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 511 #define CONFIG_ENV_OFFSET       ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
 512 #define CONFIG_ENV_RANGE        (3 * CONFIG_ENV_SIZE)
 513 #elif defined(CONFIG_SYS_RAMBOOT)
 514 #define CONFIG_ENV_IS_NOWHERE           /* Store ENV in memory only */
 515 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_MONITOR_BASE - 0x1000)
 516 #define CONFIG_ENV_SIZE                 0x2000
 517 #else
 518 #define CONFIG_ENV_IS_IN_FLASH
 519 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 520 #define CONFIG_ENV_SIZE         0x2000
 521 #define CONFIG_ENV_SECT_SIZE    0x20000
 522 #endif
 523
 524 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 525 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 526
 527 /*
 528  * Command line configuration.
 529  */
 530 #define CONFIG_CMD_DATE
 531 #define CONFIG_CMD_ERRATA
 532 #define CONFIG_CMD_IRQ
 533 #define CONFIG_CMD_REGINFO
 534
 535 /* Hash command with SHA acceleration supported in hardware */
 536 #ifdef CONFIG_FSL_CAAM
 537 #define CONFIG_CMD_HASH
 538 #define CONFIG_SHA_HW_ACCEL
 539 #endif
 540
 541 /*
 542  * Miscellaneous configurable options
 543  */
 544 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 545 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 546 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 547 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 548
 549 #if defined(CONFIG_CMD_KGDB)
 550 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 551 #else
 552 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 553 #endif
 554 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 555                                                 /* Print Buffer Size */
 556 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 557 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 558
 559 /*
 560  * For booting Linux, the board info and command line data
 561  * have to be in the first 64 MB of memory, since this is
 562  * the maximum mapped by the Linux kernel during initialization.
 563  */
 564 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20) /* Initial Memory map for Linux */
 565 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 566
 567 #if defined(CONFIG_CMD_KGDB)
 568 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 569 #endif
 570
 571 /*
 572  * Dynamic MTD Partition support with mtdparts
 573  */
 574 #ifndef CONFIG_SYS_NO_FLASH
 575 #define CONFIG_MTD_DEVICE
 576 #define CONFIG_MTD_PARTITIONS
 577 #define CONFIG_CMD_MTDPARTS
 578 #define CONFIG_FLASH_CFI_MTD
 579 #define MTDIDS_DEFAULT "nor0=88000000.nor,nand0=ff800000.flash,"
 580 #define MTDPARTS_DEFAULT "mtdparts=88000000.nor:256k(dtb),7m(kernel)," \
 581                         "55m(fs),1m(uboot);ff800000.flash:1m(uboot)," \
 582                         "8m(kernel),512k(dtb),-(fs)"
 583 #endif
 584 /*
 585  * Environment Configuration
 586  */
 587
 588 #if defined(CONFIG_TSEC_ENET)
 589 #define CONFIG_HAS_ETH0
 590 #define CONFIG_HAS_ETH1
 591 #endif
 592
 593 #define CONFIG_HOSTNAME         BSC9132qds
 594 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 595 #define CONFIG_BOOTFILE         "uImage"
 596 #define CONFIG_UBOOTPATH        "u-boot.bin"
 597
 598 #define CONFIG_BAUDRATE         115200
 599
 600 #ifdef CONFIG_SDCARD
 601 #define CONFIG_DEF_HWCONFIG     "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
 602 #else
 603 #define CONFIG_DEF_HWCONFIG     "hwconfig=sim;usb1:dr_mode=host,phy_type=ulpi\0"
 604 #endif
 605
 606 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 607         "netdev=eth0\0"                                         \
 608         "uboot=" CONFIG_UBOOTPATH "\0"                          \
 609         "loadaddr=1000000\0"                    \
 610         "bootfile=uImage\0"     \
 611         "consoledev=ttyS0\0"                            \
 612         "ramdiskaddr=2000000\0"                 \
 613         "ramdiskfile=rootfs.ext2.gz.uboot\0"            \
 614         "fdtaddr=1e00000\0"                             \
 615         "fdtfile=bsc9132qds.dtb\0"              \
 616         "bdev=sda1\0"   \
 617         CONFIG_DEF_HWCONFIG\
 618         "othbootargs=mem=880M ramdisk_size=600000 " \
 619                 "default_hugepagesz=256m hugepagesz=256m hugepages=1 " \
 620                 "isolcpus=0\0" \
 621         "usbext2boot=setenv bootargs root=/dev/ram rw " \
 622                 "console=$consoledev,$baudrate $othbootargs; "  \
 623                 "usb start;"                    \
 624                 "ext2load usb 0:4 $loadaddr $bootfile;"         \
 625                 "ext2load usb 0:4 $fdtaddr $fdtfile;"   \
 626                 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"   \
 627                 "bootm $loadaddr $ramdiskaddr $fdtaddr\0"       \
 628         "debug_halt_off=mw ff7e0e30 0xf0000000;"
 629
 630 #define CONFIG_NFSBOOTCOMMAND   \
 631         "setenv bootargs root=/dev/nfs rw "     \
 632         "nfsroot=$serverip:$rootpath "  \
 633         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 634         "console=$consoledev,$baudrate $othbootargs;" \
 635         "tftp $loadaddr $bootfile;"     \
 636         "tftp $fdtaddr $fdtfile;"       \
 637         "bootm $loadaddr - $fdtaddr"
 638
 639 #define CONFIG_HDBOOT   \
 640         "setenv bootargs root=/dev/$bdev rw rootdelay=30 "      \
 641         "console=$consoledev,$baudrate $othbootargs;" \
 642         "usb start;"    \
 643         "ext2load usb 0:1 $loadaddr /boot/$bootfile;"   \
 644         "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;"     \
 645         "bootm $loadaddr - $fdtaddr"
 646
 647 #define CONFIG_RAMBOOTCOMMAND           \
 648         "setenv bootargs root=/dev/ram rw "     \
 649         "console=$consoledev,$baudrate $othbootargs; "  \
 650         "tftp $ramdiskaddr $ramdiskfile;"       \
 651         "tftp $loadaddr $bootfile;"             \
 652         "tftp $fdtaddr $fdtfile;"               \
 653         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 654
 655 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
 656
 657 #include <asm/fsl_secure_boot.h>
 658
 659 #endif  /* __CONFIG_H */