git.sur5r.net Git - u-boot/blob - include/configs/T102xRDB.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T1024/T1023 RDB board configuration file
   9  */
  10
  11 #ifndef __T1024RDB_H
  12 #define __T1024RDB_H
  13
  14 /* High Level Configuration Options */
  15 #define CONFIG_DISPLAY_BOARDINFO
  16 #define CONFIG_BOOKE
  17 #define CONFIG_E500                     /* BOOKE e500 family */
  18 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  19 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  20 #define CONFIG_MP                       /* support multiple processors */
  21 #define CONFIG_ENABLE_36BIT_PHYS
  22
  23 #ifdef CONFIG_PHYS_64BIT
  24 #define CONFIG_ADDR_MAP         1
  25 #define CONFIG_SYS_NUM_ADDR_MAP 64      /* number of TLB1 entries */
  26 #endif
  27
  28 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  29 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  30 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  31
  32 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  33 #define CONFIG_ENV_OVERWRITE
  34
  35 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  36
  37 /* support deep sleep */
  38 #ifdef CONFIG_PPC_T1024
  39 #define CONFIG_DEEP_SLEEP
  40 #endif
  41 #if defined(CONFIG_DEEP_SLEEP)
  42 #define CONFIG_SILENT_CONSOLE
  43 #define CONFIG_BOARD_EARLY_INIT_F
  44 #endif
  45
  46 #ifdef CONFIG_RAMBOOT_PBL
  47 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xrdb/t1024_pbi.cfg
  48 #if defined(CONFIG_T1024RDB)
  49 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_rcw.cfg
  50 #elif defined(CONFIG_T1023RDB)
  51 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_rcw.cfg
  52 #endif
  53 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  54 #define CONFIG_SPL_ENV_SUPPORT
  55 #define CONFIG_SPL_SERIAL_SUPPORT
  56 #define CONFIG_SPL_FLUSH_IMAGE
  57 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  58 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  59 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  60 #define CONFIG_SPL_I2C_SUPPORT
  61 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
  62 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  63 #define CONFIG_SYS_TEXT_BASE            0x30001000
  64 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  65 #define CONFIG_SPL_PAD_TO               0x40000
  66 #define CONFIG_SPL_MAX_SIZE             0x28000
  67 #define RESET_VECTOR_OFFSET             0x27FFC
  68 #define BOOT_PAGE_OFFSET                0x27000
  69 #ifdef CONFIG_SPL_BUILD
  70 #define CONFIG_SPL_SKIP_RELOCATE
  71 #define CONFIG_SPL_COMMON_INIT_DDR
  72 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  73 #define CONFIG_SYS_NO_FLASH
  74 #endif
  75
  76 #ifdef CONFIG_NAND
  77 #define CONFIG_SPL_NAND_SUPPORT
  78 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  79 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  80 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  81 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  82 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  83 #define CONFIG_SPL_NAND_BOOT
  84 #endif
  85
  86 #ifdef CONFIG_SPIFLASH
  87 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  88 #define CONFIG_SPL_SPI_SUPPORT
  89 #define CONFIG_SPL_SPI_FLASH_SUPPORT
  90 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  91 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  92 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  93 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  94 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  95 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  96 #ifndef CONFIG_SPL_BUILD
  97 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  98 #endif
  99 #define CONFIG_SPL_SPI_BOOT
 100 #endif
 101
 102 #ifdef CONFIG_SDCARD
 103 #define CONFIG_RESET_VECTOR_ADDRESS     0x30000FFC
 104 #define CONFIG_SPL_MMC_SUPPORT
 105 #define CONFIG_SPL_MMC_MINIMAL
 106 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
 107 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
 108 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
 109 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
 110 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 111 #ifndef CONFIG_SPL_BUILD
 112 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 113 #endif
 114 #define CONFIG_SPL_MMC_BOOT
 115 #endif
 116
 117 #endif /* CONFIG_RAMBOOT_PBL */
 118
 119 #ifndef CONFIG_SYS_TEXT_BASE
 120 #define CONFIG_SYS_TEXT_BASE    0xeff40000
 121 #endif
 122
 123 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 124 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 125 #endif
 126
 127 #ifndef CONFIG_SYS_NO_FLASH
 128 #define CONFIG_FLASH_CFI_DRIVER
 129 #define CONFIG_SYS_FLASH_CFI
 130 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 131 #endif
 132
 133 /* PCIe Boot - Master */
 134 #define CONFIG_SRIO_PCIE_BOOT_MASTER
 135 /*
 136  * for slave u-boot IMAGE instored in master memory space,
 137  * PHYS must be aligned based on the SIZE
 138  */
 139 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 140 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
 141 #ifdef CONFIG_PHYS_64BIT
 142 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 143 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 144 #else
 145 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000
 146 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000
 147 #endif
 148 /*
 149  * for slave UCODE and ENV instored in master memory space,
 150  * PHYS must be aligned based on the SIZE
 151  */
 152 #ifdef CONFIG_PHYS_64BIT
 153 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 154 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0x3ffe00000ull
 155 #else
 156 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000
 157 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0xffe00000
 158 #endif
 159 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE    0x40000 /* 256K */
 160 /* slave core release by master*/
 161 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET        0xe00e4
 162 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK      0x00000001 /* release core 0 */
 163
 164 /* PCIe Boot - Slave */
 165 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 166 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 167 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 168                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 169 /* Set 1M boot space for PCIe boot */
 170 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
 171 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS       \
 172                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 173 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 174 #define CONFIG_SYS_NO_FLASH
 175 #endif
 176
 177 #if defined(CONFIG_SPIFLASH)
 178 #define CONFIG_SYS_EXTRA_ENV_RELOC
 179 #define CONFIG_ENV_IS_IN_SPI_FLASH
 180 #define CONFIG_ENV_SPI_BUS              0
 181 #define CONFIG_ENV_SPI_CS               0
 182 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 183 #define CONFIG_ENV_SPI_MODE             0
 184 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 185 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 186 #if defined(CONFIG_T1024RDB)
 187 #define CONFIG_ENV_SECT_SIZE            0x10000
 188 #elif defined(CONFIG_T1023RDB)
 189 #define CONFIG_ENV_SECT_SIZE            0x40000
 190 #endif
 191 #elif defined(CONFIG_SDCARD)
 192 #define CONFIG_SYS_EXTRA_ENV_RELOC
 193 #define CONFIG_ENV_IS_IN_MMC
 194 #define CONFIG_SYS_MMC_ENV_DEV          0
 195 #define CONFIG_ENV_SIZE                 0x2000
 196 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 197 #elif defined(CONFIG_NAND)
 198 #define CONFIG_SYS_EXTRA_ENV_RELOC
 199 #define CONFIG_ENV_IS_IN_NAND
 200 #define CONFIG_ENV_SIZE                 0x2000
 201 #if defined(CONFIG_T1024RDB)
 202 #define CONFIG_ENV_OFFSET               (2 * CONFIG_SYS_NAND_BLOCK_SIZE)
 203 #elif defined(CONFIG_T1023RDB)
 204 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 205 #endif
 206 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 207 #define CONFIG_ENV_IS_IN_REMOTE
 208 #define CONFIG_ENV_ADDR         0xffe20000
 209 #define CONFIG_ENV_SIZE         0x2000
 210 #elif defined(CONFIG_ENV_IS_NOWHERE)
 211 #define CONFIG_ENV_SIZE         0x2000
 212 #else
 213 #define CONFIG_ENV_IS_IN_FLASH
 214 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 215 #define CONFIG_ENV_SIZE         0x2000
 216 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 217 #endif
 218
 219 #ifndef __ASSEMBLY__
 220 unsigned long get_board_sys_clk(void);
 221 unsigned long get_board_ddr_clk(void);
 222 #endif
 223
 224 #define CONFIG_SYS_CLK_FREQ     100000000
 225 #define CONFIG_DDR_CLK_FREQ     100000000
 226
 227 /*
 228  * These can be toggled for performance analysis, otherwise use default.
 229  */
 230 #define CONFIG_SYS_CACHE_STASHING
 231 #define CONFIG_BACKSIDE_L2_CACHE
 232 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 233 #define CONFIG_BTB                      /* toggle branch predition */
 234 #define CONFIG_DDR_ECC
 235 #ifdef CONFIG_DDR_ECC
 236 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 237 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 238 #endif
 239
 240 #define CONFIG_SYS_MEMTEST_START        0x00200000 /* memtest works on */
 241 #define CONFIG_SYS_MEMTEST_END          0x00400000
 242 #define CONFIG_SYS_ALT_MEMTEST
 243 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 244
 245 /*
 246  *  Config the L3 Cache as L3 SRAM
 247  */
 248 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 249 #define CONFIG_SYS_L3_SIZE              (256 << 10)
 250 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 251 #ifdef CONFIG_RAMBOOT_PBL
 252 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 253 #endif
 254 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 255 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 256 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 257 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 258
 259 #ifdef CONFIG_PHYS_64BIT
 260 #define CONFIG_SYS_DCSRBAR              0xf0000000
 261 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 262 #endif
 263
 264 /* EEPROM */
 265 #define CONFIG_ID_EEPROM
 266 #define CONFIG_SYS_I2C_EEPROM_NXID
 267 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 268 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 269 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 270 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 271 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 272
 273 /*
 274  * DDR Setup
 275  */
 276 #define CONFIG_VERY_BIG_RAM
 277 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 278 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 279 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 280 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 281 #define CONFIG_FSL_DDR_INTERACTIVE
 282 #if defined(CONFIG_T1024RDB)
 283 #define CONFIG_DDR_SPD
 284 #define CONFIG_SYS_FSL_DDR3
 285 #define CONFIG_SYS_SPD_BUS_NUM  0
 286 #define SPD_EEPROM_ADDRESS      0x51
 287 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 288 #elif defined(CONFIG_T1023RDB)
 289 #define CONFIG_SYS_FSL_DDR4
 290 #define CONFIG_SYS_DDR_RAW_TIMING
 291 #define CONFIG_SYS_SDRAM_SIZE   2048
 292 #endif
 293
 294 /*
 295  * IFC Definitions
 296  */
 297 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 298 #ifdef CONFIG_PHYS_64BIT
 299 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 300 #else
 301 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 302 #endif
 303
 304 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 305 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 306                                 CSPR_PORT_SIZE_16 | \
 307                                 CSPR_MSEL_NOR | \
 308                                 CSPR_V)
 309 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 310
 311 /* NOR Flash Timing Params */
 312 #if defined(CONFIG_T1024RDB)
 313 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 314 #elif defined(CONFIG_T1023RDB)
 315 #define CONFIG_SYS_NOR_CSOR    (CSOR_NOR_ADM_SHIFT(0) | \
 316                                 CSOR_NAND_TRHZ_80 | CSOR_NOR_ADM_SHFT_MODE_EN)
 317 #endif
 318 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 319                                 FTIM0_NOR_TEADC(0x5) | \
 320                                 FTIM0_NOR_TEAHC(0x5))
 321 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 322                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 323                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 324 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 325                                 FTIM2_NOR_TCH(0x4) | \
 326                                 FTIM2_NOR_TWPH(0x0E) | \
 327                                 FTIM2_NOR_TWP(0x1c))
 328 #define CONFIG_SYS_NOR_FTIM3    0x0
 329
 330 #define CONFIG_SYS_FLASH_QUIET_TEST
 331 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 332
 333 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 334 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 335 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 336 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 337
 338 #define CONFIG_SYS_FLASH_EMPTY_INFO
 339 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 340
 341 #ifdef CONFIG_T1024RDB
 342 /* CPLD on IFC */
 343 #define CONFIG_SYS_CPLD_BASE            0xffdf0000
 344 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 345 #define CONFIG_SYS_CSPR2_EXT            (0xf)
 346 #define CONFIG_SYS_CSPR2                (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE) \
 347                                                 | CSPR_PORT_SIZE_8 \
 348                                                 | CSPR_MSEL_GPCM \
 349                                                 | CSPR_V)
 350 #define CONFIG_SYS_AMASK2               IFC_AMASK(64*1024)
 351 #define CONFIG_SYS_CSOR2                0x0
 352
 353 /* CPLD Timing parameters for IFC CS2 */
 354 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 355                                                 FTIM0_GPCM_TEADC(0x0e) | \
 356                                                 FTIM0_GPCM_TEAHC(0x0e))
 357 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 358                                                 FTIM1_GPCM_TRAD(0x1f))
 359 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 360                                                 FTIM2_GPCM_TCH(0x8) | \
 361                                                 FTIM2_GPCM_TWP(0x1f))
 362 #define CONFIG_SYS_CS2_FTIM3            0x0
 363 #endif
 364
 365 /* NAND Flash on IFC */
 366 #define CONFIG_NAND_FSL_IFC
 367 #define CONFIG_SYS_NAND_BASE            0xff800000
 368 #ifdef CONFIG_PHYS_64BIT
 369 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 370 #else
 371 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 372 #endif
 373 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 374 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 375                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 376                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 377                                 | CSPR_V)
 378 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 379
 380 #if defined(CONFIG_T1024RDB)
 381 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 382                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 383                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 384                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 385                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 386                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 387                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 388 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 389 #elif defined(CONFIG_T1023RDB)
 390 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 391                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 392                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 393                                 | CSOR_NAND_RAL_3       /* RAL 3Bytes */ \
 394                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 395                                 | CSOR_NAND_SPRZ_128    /* Spare size = 128 */ \
 396                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 397 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 398 #endif
 399
 400 #define CONFIG_SYS_NAND_ONFI_DETECTION
 401 /* ONFI NAND Flash mode0 Timing Params */
 402 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 403                                         FTIM0_NAND_TWP(0x18)   | \
 404                                         FTIM0_NAND_TWCHT(0x07) | \
 405                                         FTIM0_NAND_TWH(0x0a))
 406 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 407                                         FTIM1_NAND_TWBE(0x39)  | \
 408                                         FTIM1_NAND_TRR(0x0e)   | \
 409                                         FTIM1_NAND_TRP(0x18))
 410 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 411                                         FTIM2_NAND_TREH(0x0a) | \
 412                                         FTIM2_NAND_TWHRE(0x1e))
 413 #define CONFIG_SYS_NAND_FTIM3           0x0
 414
 415 #define CONFIG_SYS_NAND_DDR_LAW         11
 416 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 417 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 418 #define CONFIG_CMD_NAND
 419
 420 #if defined(CONFIG_NAND)
 421 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 422 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 423 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 424 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 425 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 426 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 427 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 428 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 429 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 430 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 431 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 432 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 433 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 434 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 435 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 436 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 437 #else
 438 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 439 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 440 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 441 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 442 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 443 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 444 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 445 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 446 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 447 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 448 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 449 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 450 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 451 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 452 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 453 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 454 #endif
 455
 456 #ifdef CONFIG_SPL_BUILD
 457 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 458 #else
 459 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 460 #endif
 461
 462 #if defined(CONFIG_RAMBOOT_PBL)
 463 #define CONFIG_SYS_RAMBOOT
 464 #endif
 465
 466 #define CONFIG_BOARD_EARLY_INIT_R
 467 #define CONFIG_MISC_INIT_R
 468
 469 #define CONFIG_HWCONFIG
 470
 471 /* define to use L1 as initial stack */
 472 #define CONFIG_L1_INIT_RAM
 473 #define CONFIG_SYS_INIT_RAM_LOCK
 474 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 475 #ifdef CONFIG_PHYS_64BIT
 476 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 477 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 478 /* The assembler doesn't like typecast */
 479 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 480         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 481           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 482 #else
 483 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe03c000 /* Initial L1 address */
 484 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 485 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 486 #endif
 487 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 488
 489 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 490                                         GENERATED_GBL_DATA_SIZE)
 491 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 492
 493 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 494 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 495
 496 /* Serial Port */
 497 #define CONFIG_CONS_INDEX       1
 498 #define CONFIG_SYS_NS16550_SERIAL
 499 #define CONFIG_SYS_NS16550_REG_SIZE     1
 500 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 501
 502 #define CONFIG_SYS_BAUDRATE_TABLE       \
 503         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 504
 505 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 506 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 507 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 508 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 509 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 510
 511 /* Video */
 512 #undef CONFIG_FSL_DIU_FB        /* RDB doesn't support DIU */
 513 #ifdef CONFIG_FSL_DIU_FB
 514 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 515 #define CONFIG_VIDEO
 516 #define CONFIG_CMD_BMP
 517 #define CONFIG_CFB_CONSOLE
 518 #define CONFIG_VIDEO_SW_CURSOR
 519 #define CONFIG_VGA_AS_SINGLE_DEVICE
 520 #define CONFIG_VIDEO_LOGO
 521 #define CONFIG_VIDEO_BMP_LOGO
 522 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 523 /*
 524  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 525  * disable empty flash sector detection, which is I/O-intensive.
 526  */
 527 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 528 #endif
 529
 530 /* I2C */
 531 #define CONFIG_SYS_I2C
 532 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 533 #define CONFIG_SYS_FSL_I2C_SPEED        50000   /* I2C speed in Hz */
 534 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 535 #define CONFIG_SYS_FSL_I2C2_SPEED       50000   /* I2C speed in Hz */
 536 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 537 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 538 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 539
 540 #define I2C_PCA6408_BUS_NUM             1
 541 #define I2C_PCA6408_ADDR                0x20
 542
 543 /* I2C bus multiplexer */
 544 #define I2C_MUX_CH_DEFAULT      0x8
 545
 546 /*
 547  * RTC configuration
 548  */
 549 #define RTC
 550 #define CONFIG_RTC_DS1337       1
 551 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 552
 553 /*
 554  * eSPI - Enhanced SPI
 555  */
 556 #define CONFIG_SPI_FLASH_BAR
 557 #define CONFIG_SF_DEFAULT_SPEED 10000000
 558 #define CONFIG_SF_DEFAULT_MODE  0
 559
 560 /*
 561  * General PCIe
 562  * Memory space is mapped 1-1, but I/O space must start from 0.
 563  */
 564 #define CONFIG_PCI              /* Enable PCI/PCIE */
 565 #define CONFIG_PCIE1            /* PCIE controller 1 */
 566 #define CONFIG_PCIE2            /* PCIE controller 2 */
 567 #define CONFIG_PCIE3            /* PCIE controller 3 */
 568 #ifdef CONFIG_PPC_T1040
 569 #define CONFIG_PCIE4            /* PCIE controller 4 */
 570 #endif
 571 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 572 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 573 #define CONFIG_PCI_INDIRECT_BRIDGE
 574
 575 #ifdef CONFIG_PCI
 576 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 577 #ifdef CONFIG_PCIE1
 578 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 579 #ifdef CONFIG_PHYS_64BIT
 580 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 581 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 582 #else
 583 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 584 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 585 #endif
 586 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 587 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 588 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 589 #ifdef CONFIG_PHYS_64BIT
 590 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 591 #else
 592 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 593 #endif
 594 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 595 #endif
 596
 597 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 598 #ifdef CONFIG_PCIE2
 599 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 600 #ifdef CONFIG_PHYS_64BIT
 601 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 602 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 603 #else
 604 #define CONFIG_SYS_PCIE2_MEM_BUS        0x90000000
 605 #define CONFIG_SYS_PCIE2_MEM_PHYS       0x90000000
 606 #endif
 607 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 608 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 609 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 610 #ifdef CONFIG_PHYS_64BIT
 611 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 612 #else
 613 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 614 #endif
 615 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 616 #endif
 617
 618 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 619 #ifdef CONFIG_PCIE3
 620 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 621 #ifdef CONFIG_PHYS_64BIT
 622 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 623 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 624 #else
 625 #define CONFIG_SYS_PCIE3_MEM_BUS        0xa0000000
 626 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xa0000000
 627 #endif
 628 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 629 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 630 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 631 #ifdef CONFIG_PHYS_64BIT
 632 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 633 #else
 634 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 635 #endif
 636 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 637 #endif
 638
 639 /* controller 4, Base address 203000, to be removed */
 640 #ifdef CONFIG_PCIE4
 641 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 642 #ifdef CONFIG_PHYS_64BIT
 643 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 644 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 645 #else
 646 #define CONFIG_SYS_PCIE4_MEM_BUS        0xb0000000
 647 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xb0000000
 648 #endif
 649 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 650 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 651 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 652 #ifdef CONFIG_PHYS_64BIT
 653 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 654 #else
 655 #define CONFIG_SYS_PCIE4_IO_PHYS        0xf8030000
 656 #endif
 657 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 658 #endif
 659
 660 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 661 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 662 #define CONFIG_DOS_PARTITION
 663 #endif  /* CONFIG_PCI */
 664
 665 /*
 666  * USB
 667  */
 668 #define CONFIG_HAS_FSL_DR_USB
 669
 670 #ifdef CONFIG_HAS_FSL_DR_USB
 671 #define CONFIG_USB_EHCI
 672 #define CONFIG_USB_EHCI_FSL
 673 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 674 #endif
 675
 676 /*
 677  * SDHC
 678  */
 679 #define CONFIG_MMC
 680 #ifdef CONFIG_MMC
 681 #define CONFIG_FSL_ESDHC
 682 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 683 #define CONFIG_GENERIC_MMC
 684 #define CONFIG_DOS_PARTITION
 685 #endif
 686
 687 /* Qman/Bman */
 688 #ifndef CONFIG_NOBQFMAN
 689 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 690 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 691 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 692 #ifdef CONFIG_PHYS_64BIT
 693 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 694 #else
 695 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 696 #endif
 697 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 698 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 699 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 700 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 701 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 702 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 703                                         CONFIG_SYS_BMAN_CENA_SIZE)
 704 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 705 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 706 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 707 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 708 #ifdef CONFIG_PHYS_64BIT
 709 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 710 #else
 711 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 712 #endif
 713 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 714 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 715 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 716 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 717 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 718 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 719                                         CONFIG_SYS_QMAN_CENA_SIZE)
 720 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 721 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 722
 723 #define CONFIG_SYS_DPAA_FMAN
 724
 725 #ifdef CONFIG_T1024RDB
 726 #define CONFIG_QE
 727 #define CONFIG_U_QE
 728 #endif
 729 /* Default address of microcode for the Linux FMan driver */
 730 #if defined(CONFIG_SPIFLASH)
 731 /*
 732  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 733  * env, so we got 0x110000.
 734  */
 735 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 736 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 737 #define CONFIG_SYS_QE_FW_ADDR   0x130000
 738 #elif defined(CONFIG_SDCARD)
 739 /*
 740  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 741  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 742  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820).
 743  */
 744 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 745 #define CONFIG_SYS_FMAN_FW_ADDR         (512 * 0x820)
 746 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 747 #elif defined(CONFIG_NAND)
 748 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 749 #if defined(CONFIG_T1024RDB)
 750 #define CONFIG_SYS_FMAN_FW_ADDR         (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 751 #define CONFIG_SYS_QE_FW_ADDR           (4 * CONFIG_SYS_NAND_BLOCK_SIZE)
 752 #elif defined(CONFIG_T1023RDB)
 753 #define CONFIG_SYS_FMAN_FW_ADDR         (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 754 #define CONFIG_SYS_QE_FW_ADDR           (12 * CONFIG_SYS_NAND_BLOCK_SIZE)
 755 #endif
 756 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 757 /*
 758  * Slave has no ucode locally, it can fetch this from remote. When implementing
 759  * in two corenet boards, slave's ucode could be stored in master's memory
 760  * space, the address can be mapped from slave TLB->slave LAW->
 761  * slave SRIO or PCIE outbound window->master inbound window->
 762  * master LAW->the ucode address in master's memory space.
 763  */
 764 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 765 #define CONFIG_SYS_FMAN_FW_ADDR         0xFFE00000
 766 #else
 767 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 768 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 769 #define CONFIG_SYS_QE_FW_ADDR           0xEFE00000
 770 #endif
 771 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 772 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 773 #endif /* CONFIG_NOBQFMAN */
 774
 775 #ifdef CONFIG_SYS_DPAA_FMAN
 776 #define CONFIG_FMAN_ENET
 777 #define CONFIG_PHYLIB_10G
 778 #define CONFIG_PHY_REALTEK
 779 #define CONFIG_PHY_AQUANTIA
 780 #if defined(CONFIG_T1024RDB)
 781 #define RGMII_PHY1_ADDR         0x2
 782 #define RGMII_PHY2_ADDR         0x6
 783 #define SGMII_AQR_PHY_ADDR      0x2
 784 #define FM1_10GEC1_PHY_ADDR     0x1
 785 #elif defined(CONFIG_T1023RDB)
 786 #define RGMII_PHY1_ADDR         0x1
 787 #define SGMII_RTK_PHY_ADDR      0x3
 788 #define SGMII_AQR_PHY_ADDR      0x2
 789 #endif
 790 #endif
 791
 792 #ifdef CONFIG_FMAN_ENET
 793 #define CONFIG_MII              /* MII PHY management */
 794 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 795 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 796 #endif
 797
 798 /*
 799  * Dynamic MTD Partition support with mtdparts
 800  */
 801 #ifndef CONFIG_SYS_NO_FLASH
 802 #define CONFIG_MTD_DEVICE
 803 #define CONFIG_MTD_PARTITIONS
 804 #define CONFIG_CMD_MTDPARTS
 805 #define CONFIG_FLASH_CFI_MTD
 806 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
 807                         "spi0=spife110000.1"
 808 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 809                         "128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot)," \
 810                         "5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:" \
 811                         "1m(uboot),5m(kernel),128k(dtb),-(user)"
 812 #endif
 813
 814 /*
 815  * Environment
 816  */
 817 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 818 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 819
 820 /*
 821  * Command line configuration.
 822  */
 823 #define CONFIG_CMD_DATE
 824 #define CONFIG_CMD_EEPROM
 825 #define CONFIG_CMD_ERRATA
 826 #define CONFIG_CMD_IRQ
 827 #define CONFIG_CMD_REGINFO
 828
 829 #ifdef CONFIG_PCI
 830 #define CONFIG_CMD_PCI
 831 #endif
 832
 833 /*
 834  * Miscellaneous configurable options
 835  */
 836 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 837 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 838 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 839 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 840 #ifdef CONFIG_CMD_KGDB
 841 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 842 #else
 843 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 844 #endif
 845 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 846 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 847 #define CONFIG_SYS_BARGSIZE  CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size */
 848
 849 /*
 850  * For booting Linux, the board info and command line data
 851  * have to be in the first 64 MB of memory, since this is
 852  * the maximum mapped by the Linux kernel during initialization.
 853  */
 854 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 855 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 856
 857 #ifdef CONFIG_CMD_KGDB
 858 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 859 #endif
 860
 861 /*
 862  * Environment Configuration
 863  */
 864 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 865 #define CONFIG_BOOTFILE         "uImage"
 866 #define CONFIG_UBOOTPATH        u-boot.bin /* U-Boot image on TFTP server */
 867 #define CONFIG_LOADADDR         1000000 /* default location for tftp, bootm */
 868 #define CONFIG_BAUDRATE         115200
 869 #define __USB_PHY_TYPE          utmi
 870
 871 #ifdef CONFIG_PPC_T1024
 872 #define CONFIG_BOARDNAME t1024rdb
 873 #define BANK_INTLV cs0_cs1
 874 #else
 875 #define CONFIG_BOARDNAME t1023rdb
 876 #define BANK_INTLV  null
 877 #endif
 878
 879 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 880         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 881         "bank_intlv=" __stringify(BANK_INTLV) "\0"              \
 882         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"  \
 883         "ramdiskfile=" __stringify(CONFIG_BOARDNAME) "/ramdisk.uboot\0" \
 884         "fdtfile=" __stringify(CONFIG_BOARDNAME) "/"            \
 885         __stringify(CONFIG_BOARDNAME) ".dtb\0"                  \
 886         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 887         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 888         "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \
 889         "netdev=eth0\0"                                         \
 890         "tftpflash=tftpboot $loadaddr $uboot && "               \
 891         "protect off $ubootaddr +$filesize && "                 \
 892         "erase $ubootaddr +$filesize && "                       \
 893         "cp.b $loadaddr $ubootaddr $filesize && "               \
 894         "protect on $ubootaddr +$filesize && "                  \
 895         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 896         "consoledev=ttyS0\0"                                    \
 897         "ramdiskaddr=2000000\0"                                 \
 898         "fdtaddr=1e00000\0"                                     \
 899         "bdev=sda3\0"
 900
 901 #define CONFIG_LINUX                                    \
 902         "setenv bootargs root=/dev/ram rw "             \
 903         "console=$consoledev,$baudrate $othbootargs;"   \
 904         "setenv ramdiskaddr 0x02000000;"                \
 905         "setenv fdtaddr 0x00c00000;"                    \
 906         "setenv loadaddr 0x1000000;"                    \
 907         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 908
 909 #define CONFIG_NFSBOOTCOMMAND                   \
 910         "setenv bootargs root=/dev/nfs rw "     \
 911         "nfsroot=$serverip:$rootpath "          \
 912         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 913         "console=$consoledev,$baudrate $othbootargs;"   \
 914         "tftp $loadaddr $bootfile;"             \
 915         "tftp $fdtaddr $fdtfile;"               \
 916         "bootm $loadaddr - $fdtaddr"
 917
 918 #define CONFIG_BOOTCOMMAND      CONFIG_LINUX
 919
 920 /* Hash command with SHA acceleration supported in hardware */
 921 #ifdef CONFIG_FSL_CAAM
 922 #define CONFIG_CMD_HASH
 923 #define CONFIG_SHA_HW_ACCEL
 924 #endif
 925
 926 #include <asm/fsl_secure_boot.h>
 927
 928 #endif  /* __T1024RDB_H */