git.sur5r.net Git - u-boot/blob - include/configs/T4240RDB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  */
   5
   6 /*
   7  * T4240 RDB board configuration file
   8  */
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #define CONFIG_FSL_SATA_V2
  13 #define CONFIG_PCIE4
  14
  15 #define CONFIG_ICS307_REFCLK_HZ         25000000  /* ICS307 ref clk freq */
  16
  17 #ifdef CONFIG_RAMBOOT_PBL
  18 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4rdb/t4_pbi.cfg
  19 #ifndef CONFIG_SDCARD
  20 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  21 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  22 #else
  23 #define CONFIG_SPL_FLUSH_IMAGE
  24 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  25 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  26 #define CONFIG_SPL_PAD_TO               0x40000
  27 #define CONFIG_SPL_MAX_SIZE             0x28000
  28 #define RESET_VECTOR_OFFSET             0x27FFC
  29 #define BOOT_PAGE_OFFSET                0x27000
  30
  31 #ifdef  CONFIG_SDCARD
  32 #define CONFIG_RESET_VECTOR_ADDRESS     0x200FFC
  33 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  34 #define CONFIG_SYS_MMC_U_BOOT_DST       0x00200000
  35 #define CONFIG_SYS_MMC_U_BOOT_START     0x00200000
  36 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  37 #ifndef CONFIG_SPL_BUILD
  38 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  39 #endif
  40 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  41 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4rdb/t4_sd_rcw.cfg
  42 #define CONFIG_SPL_MMC_BOOT
  43 #endif
  44
  45 #ifdef CONFIG_SPL_BUILD
  46 #define CONFIG_SPL_SKIP_RELOCATE
  47 #define CONFIG_SPL_COMMON_INIT_DDR
  48 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  49 #endif
  50
  51 #endif
  52 #endif /* CONFIG_RAMBOOT_PBL */
  53
  54 #define CONFIG_DDR_ECC
  55
  56 /* High Level Configuration Options */
  57 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  58
  59 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  60 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  61 #endif
  62
  63 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  64 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  65 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  66 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  67 #define CONFIG_PCIE3                    /* PCIE controller 3 */
  68 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  69 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  70
  71 #define CONFIG_ENV_OVERWRITE
  72
  73 /*
  74  * These can be toggled for performance analysis, otherwise use default.
  75  */
  76 #define CONFIG_SYS_CACHE_STASHING
  77 #define CONFIG_BTB                      /* toggle branch predition */
  78 #ifdef CONFIG_DDR_ECC
  79 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  80 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  81 #endif
  82
  83 #define CONFIG_ENABLE_36BIT_PHYS
  84
  85 #define CONFIG_ADDR_MAP
  86 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
  87
  88 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
  89 #define CONFIG_SYS_MEMTEST_END          0x00400000
  90
  91 /*
  92  *  Config the L3 Cache as L3 SRAM
  93  */
  94 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
  95 #define CONFIG_SYS_L3_SIZE              (512 << 10)
  96 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
  97 #ifdef CONFIG_RAMBOOT_PBL
  98 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
  99 #endif
 100 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 101 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (50 << 10)
 102 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 103 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 104
 105 #define CONFIG_SYS_DCSRBAR              0xf0000000
 106 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 107
 108 /*
 109  * DDR Setup
 110  */
 111 #define CONFIG_VERY_BIG_RAM
 112 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 113 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 114
 115 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 116 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
 117 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
 118
 119 #define CONFIG_DDR_SPD
 120
 121 /*
 122  * IFC Definitions
 123  */
 124 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 125 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 126
 127 #ifdef CONFIG_SPL_BUILD
 128 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 129 #else
 130 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 131 #endif
 132
 133 #define CONFIG_MISC_INIT_R
 134
 135 #define CONFIG_HWCONFIG
 136
 137 /* define to use L1 as initial stack */
 138 #define CONFIG_L1_INIT_RAM
 139 #define CONFIG_SYS_INIT_RAM_LOCK
 140 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 141 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 142 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 143 /* The assembler doesn't like typecast */
 144 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 145         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 146           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 147 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 148
 149 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 150                                         GENERATED_GBL_DATA_SIZE)
 151 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 152
 153 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 154 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 155
 156 /* Serial Port - controlled on board with jumper J8
 157  * open - index 2
 158  * shorted - index 1
 159  */
 160 #define CONFIG_SYS_NS16550_SERIAL
 161 #define CONFIG_SYS_NS16550_REG_SIZE     1
 162 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 163
 164 #define CONFIG_SYS_BAUDRATE_TABLE       \
 165         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 166
 167 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 168 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 169 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 170 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 171
 172 /* I2C */
 173 #define CONFIG_SYS_I2C
 174 #define CONFIG_SYS_I2C_FSL
 175 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 176 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 177 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 178 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 179
 180 /*
 181  * General PCI
 182  * Memory space is mapped 1-1, but I/O space must start from 0.
 183  */
 184
 185 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 186 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 187 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 188 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 189 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 190 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 191 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 192 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 193 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 194
 195 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 196 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 197 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 198 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 199 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 200 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 201 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 202 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 203 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 204
 205 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 206 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 207 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 208 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 209 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 210 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 211 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 212 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 213 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 214
 215 /* controller 4, Base address 203000 */
 216 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 217 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 218 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 219 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 220 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 221 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 222
 223 #ifdef CONFIG_PCI
 224 #define CONFIG_PCI_INDIRECT_BRIDGE
 225
 226 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 227 #endif  /* CONFIG_PCI */
 228
 229 /* SATA */
 230 #ifdef CONFIG_FSL_SATA_V2
 231 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 232 #define CONFIG_SATA1
 233 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 234 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 235 #define CONFIG_SATA2
 236 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 237 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 238
 239 #define CONFIG_LBA48
 240 #endif
 241
 242 #ifdef CONFIG_FMAN_ENET
 243 #define CONFIG_MII              /* MII PHY management */
 244 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 245 #endif
 246
 247 /*
 248  * Environment
 249  */
 250 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 251 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 252
 253 /*
 254  * Command line configuration.
 255  */
 256
 257 /*
 258  * Miscellaneous configurable options
 259  */
 260 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 261
 262 /*
 263  * For booting Linux, the board info and command line data
 264  * have to be in the first 64 MB of memory, since this is
 265  * the maximum mapped by the Linux kernel during initialization.
 266  */
 267 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 268 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 269
 270 #ifdef CONFIG_CMD_KGDB
 271 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 272 #endif
 273
 274 /*
 275  * Environment Configuration
 276  */
 277 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 278 #define CONFIG_BOOTFILE         "uImage"
 279 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 280
 281 /* default location for tftp and bootm */
 282 #define CONFIG_LOADADDR         1000000
 283
 284 #define CONFIG_HVBOOT                                   \
 285         "setenv bootargs config-addr=0x60000000; "      \
 286         "bootm 0x01000000 - 0x00f00000"
 287
 288 #ifndef CONFIG_MTD_NOR_FLASH
 289 #else
 290 #define CONFIG_FLASH_CFI_DRIVER
 291 #define CONFIG_SYS_FLASH_CFI
 292 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 293 #endif
 294
 295 #if defined(CONFIG_SPIFLASH)
 296 #define CONFIG_SYS_EXTRA_ENV_RELOC
 297 #define CONFIG_ENV_SPI_BUS              0
 298 #define CONFIG_ENV_SPI_CS               0
 299 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 300 #define CONFIG_ENV_SPI_MODE             0
 301 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 302 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 303 #define CONFIG_ENV_SECT_SIZE            0x10000
 304 #elif defined(CONFIG_SDCARD)
 305 #define CONFIG_SYS_EXTRA_ENV_RELOC
 306 #define CONFIG_SYS_MMC_ENV_DEV          0
 307 #define CONFIG_ENV_SIZE                 0x2000
 308 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 309 #elif defined(CONFIG_NAND)
 310 #define CONFIG_SYS_EXTRA_ENV_RELOC
 311 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
 312 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 313 #elif defined(CONFIG_ENV_IS_NOWHERE)
 314 #define CONFIG_ENV_SIZE         0x2000
 315 #else
 316 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 317 #define CONFIG_ENV_SIZE         0x2000
 318 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 319 #endif
 320
 321 #define CONFIG_SYS_CLK_FREQ     66666666
 322 #define CONFIG_DDR_CLK_FREQ     133333333
 323
 324 #ifndef __ASSEMBLY__
 325 unsigned long get_board_sys_clk(void);
 326 unsigned long get_board_ddr_clk(void);
 327 #endif
 328
 329 /*
 330  * DDR Setup
 331  */
 332 #define CONFIG_SYS_SPD_BUS_NUM  0
 333 #define SPD_EEPROM_ADDRESS1     0x52
 334 #define SPD_EEPROM_ADDRESS2     0x54
 335 #define SPD_EEPROM_ADDRESS3     0x56
 336 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 337 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 338
 339 /*
 340  * IFC Definitions
 341  */
 342 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 343 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 344                                 + 0x8000000) | \
 345                                 CSPR_PORT_SIZE_16 | \
 346                                 CSPR_MSEL_NOR | \
 347                                 CSPR_V)
 348 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 349 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 350                                 CSPR_PORT_SIZE_16 | \
 351                                 CSPR_MSEL_NOR | \
 352                                 CSPR_V)
 353 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 354 /* NOR Flash Timing Params */
 355 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 356
 357 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 358                                 FTIM0_NOR_TEADC(0x5) | \
 359                                 FTIM0_NOR_TEAHC(0x5))
 360 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 361                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 362                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 363 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 364                                 FTIM2_NOR_TCH(0x4) | \
 365                                 FTIM2_NOR_TWPH(0x0E) | \
 366                                 FTIM2_NOR_TWP(0x1c))
 367 #define CONFIG_SYS_NOR_FTIM3    0x0
 368
 369 #define CONFIG_SYS_FLASH_QUIET_TEST
 370 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 371
 372 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 373 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 374 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 375 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 376
 377 #define CONFIG_SYS_FLASH_EMPTY_INFO
 378 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 379                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 380
 381 /* NAND Flash on IFC */
 382 #define CONFIG_NAND_FSL_IFC
 383 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 384 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 385 #define CONFIG_SYS_NAND_BASE            0xff800000
 386 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 387
 388 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 389 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 390                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 391                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 392                                 | CSPR_V)
 393 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 394
 395 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 396                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 397                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 398                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 399                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 400                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 401                                 | CSOR_NAND_PB(128))    /*Page Per Block = 128*/
 402
 403 #define CONFIG_SYS_NAND_ONFI_DETECTION
 404
 405 /* ONFI NAND Flash mode0 Timing Params */
 406 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 407                                         FTIM0_NAND_TWP(0x18)   | \
 408                                         FTIM0_NAND_TWCHT(0x07) | \
 409                                         FTIM0_NAND_TWH(0x0a))
 410 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 411                                         FTIM1_NAND_TWBE(0x39)  | \
 412                                         FTIM1_NAND_TRR(0x0e)   | \
 413                                         FTIM1_NAND_TRP(0x18))
 414 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 415                                         FTIM2_NAND_TREH(0x0a) | \
 416                                         FTIM2_NAND_TWHRE(0x1e))
 417 #define CONFIG_SYS_NAND_FTIM3           0x0
 418
 419 #define CONFIG_SYS_NAND_DDR_LAW         11
 420 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 421 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 422
 423 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 424
 425 #if defined(CONFIG_NAND)
 426 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 427 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 428 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 429 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 430 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 431 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 432 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 433 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 434 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 435 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 436 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 437 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 438 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 439 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 440 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 441 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 442 #else
 443 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 444 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 445 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 446 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 447 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 448 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 449 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 450 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 451 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 452 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 453 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 454 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 455 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 456 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 457 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 458 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 459 #endif
 460 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 461 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 462 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 463 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 464 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 465 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 466 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 467 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 468
 469 /* CPLD on IFC */
 470 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 471 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 472 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 473 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 474                                 | CSPR_PORT_SIZE_8 \
 475                                 | CSPR_MSEL_GPCM \
 476                                 | CSPR_V)
 477
 478 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 479 #define CONFIG_SYS_CSOR3        0x0
 480
 481 /* CPLD Timing parameters for IFC CS3 */
 482 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 483                                         FTIM0_GPCM_TEADC(0x0e) | \
 484                                         FTIM0_GPCM_TEAHC(0x0e))
 485 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 486                                         FTIM1_GPCM_TRAD(0x1f))
 487 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 488                                         FTIM2_GPCM_TCH(0x8) | \
 489                                         FTIM2_GPCM_TWP(0x1f))
 490 #define CONFIG_SYS_CS3_FTIM3            0x0
 491
 492 #if defined(CONFIG_RAMBOOT_PBL)
 493 #define CONFIG_SYS_RAMBOOT
 494 #endif
 495
 496 /* I2C */
 497 #define CONFIG_SYS_FSL_I2C_SPEED        100000  /* I2C speed */
 498 #define CONFIG_SYS_FSL_I2C2_SPEED       100000  /* I2C2 speed */
 499 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* I2C bus multiplexer,primary */
 500 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* I2C bus multiplexer,secondary */
 501
 502 #define I2C_MUX_CH_DEFAULT      0x8
 503 #define I2C_MUX_CH_VOL_MONITOR  0xa
 504 #define I2C_MUX_CH_VSC3316_FS   0xc
 505 #define I2C_MUX_CH_VSC3316_BS   0xd
 506
 507 /* Voltage monitor on channel 2*/
 508 #define I2C_VOL_MONITOR_ADDR            0x40
 509 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 510 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 511 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 512
 513 #define CONFIG_VID_FLS_ENV              "t4240rdb_vdd_mv"
 514 #ifndef CONFIG_SPL_BUILD
 515 #define CONFIG_VID
 516 #endif
 517 #define CONFIG_VOL_MONITOR_IR36021_SET
 518 #define CONFIG_VOL_MONITOR_IR36021_READ
 519 /* The lowest and highest voltage allowed for T4240RDB */
 520 #define VDD_MV_MIN                      819
 521 #define VDD_MV_MAX                      1212
 522
 523 /*
 524  * eSPI - Enhanced SPI
 525  */
 526 #define CONFIG_SF_DEFAULT_SPEED         10000000
 527 #define CONFIG_SF_DEFAULT_MODE          0
 528
 529 /* Qman/Bman */
 530 #ifndef CONFIG_NOBQFMAN
 531 #define CONFIG_SYS_BMAN_NUM_PORTALS     50
 532 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 533 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 534 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 535 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 536 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 537 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 538 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 539 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 540                                         CONFIG_SYS_BMAN_CENA_SIZE)
 541 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 542 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 543 #define CONFIG_SYS_QMAN_NUM_PORTALS     50
 544 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 545 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 546 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 547 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 548 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 549 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 550 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 551 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 552                                         CONFIG_SYS_QMAN_CENA_SIZE)
 553 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 554 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 555
 556 #define CONFIG_SYS_DPAA_FMAN
 557 #define CONFIG_SYS_DPAA_PME
 558 #define CONFIG_SYS_PMAN
 559 #define CONFIG_SYS_DPAA_DCE
 560 #define CONFIG_SYS_DPAA_RMAN
 561 #define CONFIG_SYS_INTERLAKEN
 562
 563 /* Default address of microcode for the Linux Fman driver */
 564 #if defined(CONFIG_SPIFLASH)
 565 /*
 566  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 567  * env, so we got 0x110000.
 568  */
 569 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 570 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 571 #elif defined(CONFIG_SDCARD)
 572 /*
 573  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 574  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 575  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 576  */
 577 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 578 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 579 #elif defined(CONFIG_NAND)
 580 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 581 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 582 #else
 583 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 584 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
 585 #endif
 586 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 587 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 588 #endif /* CONFIG_NOBQFMAN */
 589
 590 #ifdef CONFIG_SYS_DPAA_FMAN
 591 #define CONFIG_FMAN_ENET
 592 #define CONFIG_PHYLIB_10G
 593 #define CONFIG_PHY_VITESSE
 594 #define CONFIG_PHY_CORTINA
 595 #define CONFIG_SYS_CORTINA_FW_IN_NOR
 596 #define CONFIG_CORTINA_FW_ADDR          0xefe00000
 597 #define CONFIG_CORTINA_FW_LENGTH        0x40000
 598 #define CONFIG_PHY_TERANETICS
 599 #define SGMII_PHY_ADDR1 0x0
 600 #define SGMII_PHY_ADDR2 0x1
 601 #define SGMII_PHY_ADDR3 0x2
 602 #define SGMII_PHY_ADDR4 0x3
 603 #define SGMII_PHY_ADDR5 0x4
 604 #define SGMII_PHY_ADDR6 0x5
 605 #define SGMII_PHY_ADDR7 0x6
 606 #define SGMII_PHY_ADDR8 0x7
 607 #define FM1_10GEC1_PHY_ADDR     0x10
 608 #define FM1_10GEC2_PHY_ADDR     0x11
 609 #define FM2_10GEC1_PHY_ADDR     0x12
 610 #define FM2_10GEC2_PHY_ADDR     0x13
 611 #define CORTINA_PHY_ADDR1       FM1_10GEC1_PHY_ADDR
 612 #define CORTINA_PHY_ADDR2       FM1_10GEC2_PHY_ADDR
 613 #define CORTINA_PHY_ADDR3       FM2_10GEC1_PHY_ADDR
 614 #define CORTINA_PHY_ADDR4       FM2_10GEC2_PHY_ADDR
 615 #endif
 616
 617 /* SATA */
 618 #ifdef CONFIG_FSL_SATA_V2
 619 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 620 #define CONFIG_SATA1
 621 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 622 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 623 #define CONFIG_SATA2
 624 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 625 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 626
 627 #define CONFIG_LBA48
 628 #endif
 629
 630 #ifdef CONFIG_FMAN_ENET
 631 #define CONFIG_MII              /* MII PHY management */
 632 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 633 #endif
 634
 635 /*
 636 * USB
 637 */
 638 #define CONFIG_USB_EHCI_FSL
 639 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 640 #define CONFIG_HAS_FSL_DR_USB
 641
 642 #ifdef CONFIG_MMC
 643 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 644 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 645 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 646 #endif
 647
 648
 649 #define __USB_PHY_TYPE  utmi
 650
 651 /*
 652  * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
 653  * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
 654  * interleaving. It can be cacheline, page, bank, superbank.
 655  * See doc/README.fsl-ddr for details.
 656  */
 657 #ifdef CONFIG_ARCH_T4240
 658 #define CTRL_INTLV_PREFERED 3way_4KB
 659 #else
 660 #define CTRL_INTLV_PREFERED cacheline
 661 #endif
 662
 663 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 664         "hwconfig=fsl_ddr:"                                     \
 665         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 666         "bank_intlv=auto;"                                      \
 667         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 668         "netdev=eth0\0"                                         \
 669         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 670         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 671         "tftpflash=tftpboot $loadaddr $uboot && "               \
 672         "protect off $ubootaddr +$filesize && "                 \
 673         "erase $ubootaddr +$filesize && "                       \
 674         "cp.b $loadaddr $ubootaddr $filesize && "               \
 675         "protect on $ubootaddr +$filesize && "                  \
 676         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 677         "consoledev=ttyS0\0"                                    \
 678         "ramdiskaddr=2000000\0"                                 \
 679         "ramdiskfile=t4240rdb/ramdisk.uboot\0"                  \
 680         "fdtaddr=1e00000\0"                                     \
 681         "fdtfile=t4240rdb/t4240rdb.dtb\0"                       \
 682         "bdev=sda3\0"
 683
 684 #define CONFIG_HVBOOT                                   \
 685         "setenv bootargs config-addr=0x60000000; "      \
 686         "bootm 0x01000000 - 0x00f00000"
 687
 688 #define CONFIG_LINUX                                    \
 689         "setenv bootargs root=/dev/ram rw "             \
 690         "console=$consoledev,$baudrate $othbootargs;"   \
 691         "setenv ramdiskaddr 0x02000000;"                \
 692         "setenv fdtaddr 0x00c00000;"                    \
 693         "setenv loadaddr 0x1000000;"                    \
 694         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 695
 696 #define CONFIG_HDBOOT                                   \
 697         "setenv bootargs root=/dev/$bdev rw "           \
 698         "console=$consoledev,$baudrate $othbootargs;"   \
 699         "tftp $loadaddr $bootfile;"                     \
 700         "tftp $fdtaddr $fdtfile;"                       \
 701         "bootm $loadaddr - $fdtaddr"
 702
 703 #define CONFIG_NFSBOOTCOMMAND                   \
 704         "setenv bootargs root=/dev/nfs rw "     \
 705         "nfsroot=$serverip:$rootpath "          \
 706         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 707         "console=$consoledev,$baudrate $othbootargs;"   \
 708         "tftp $loadaddr $bootfile;"             \
 709         "tftp $fdtaddr $fdtfile;"               \
 710         "bootm $loadaddr - $fdtaddr"
 711
 712 #define CONFIG_RAMBOOTCOMMAND                           \
 713         "setenv bootargs root=/dev/ram rw "             \
 714         "console=$consoledev,$baudrate $othbootargs;"   \
 715         "tftp $ramdiskaddr $ramdiskfile;"               \
 716         "tftp $loadaddr $bootfile;"                     \
 717         "tftp $fdtaddr $fdtfile;"                       \
 718         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 719
 720 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 721
 722 #include <asm/fsl_secure_boot.h>
 723
 724 #endif  /* __CONFIG_H */