git.sur5r.net Git - u-boot/blob - include/configs/T4240RDB.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T4240 RDB board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #define CONFIG_T4240RDB
  14 #define CONFIG_DISPLAY_BOARDINFO
  15
  16 #define CONFIG_FSL_SATA_V2
  17 #define CONFIG_PCIE4
  18
  19 #define CONFIG_ICS307_REFCLK_HZ         25000000  /* ICS307 ref clk freq */
  20
  21 #ifdef CONFIG_RAMBOOT_PBL
  22 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4rdb/t4_pbi.cfg
  23 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4rdb/t4_rcw.cfg
  24 #ifndef CONFIG_SDCARD
  25 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  26 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  27 #else
  28 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  29 #define CONFIG_SPL_ENV_SUPPORT
  30 #define CONFIG_SPL_SERIAL_SUPPORT
  31 #define CONFIG_SPL_FLUSH_IMAGE
  32 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  33 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  34 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  35 #define CONFIG_SPL_I2C_SUPPORT
  36 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
  37 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
  38 #define CONFIG_SYS_TEXT_BASE            0x00201000
  39 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  40 #define CONFIG_SPL_PAD_TO               0x40000
  41 #define CONFIG_SPL_MAX_SIZE             0x28000
  42 #define RESET_VECTOR_OFFSET             0x27FFC
  43 #define BOOT_PAGE_OFFSET                0x27000
  44
  45 #ifdef  CONFIG_SDCARD
  46 #define CONFIG_RESET_VECTOR_ADDRESS     0x200FFC
  47 #define CONFIG_SPL_MMC_SUPPORT
  48 #define CONFIG_SPL_MMC_MINIMAL
  49 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  50 #define CONFIG_SYS_MMC_U_BOOT_DST       0x00200000
  51 #define CONFIG_SYS_MMC_U_BOOT_START     0x00200000
  52 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  53 #ifndef CONFIG_SPL_BUILD
  54 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  55 #endif
  56 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  57 #define CONFIG_SPL_MMC_BOOT
  58 #endif
  59
  60 #ifdef CONFIG_SPL_BUILD
  61 #define CONFIG_SPL_SKIP_RELOCATE
  62 #define CONFIG_SPL_COMMON_INIT_DDR
  63 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  64 #define CONFIG_SYS_NO_FLASH
  65 #endif
  66
  67 #endif
  68 #endif /* CONFIG_RAMBOOT_PBL */
  69
  70 #define CONFIG_DDR_ECC
  71
  72 #define CONFIG_CMD_REGINFO
  73
  74 /* High Level Configuration Options */
  75 #define CONFIG_BOOKE
  76 #define CONFIG_E500                     /* BOOKE e500 family */
  77 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  78 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  79 #define CONFIG_MP                       /* support multiple processors */
  80
  81 #ifndef CONFIG_SYS_TEXT_BASE
  82 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  83 #endif
  84
  85 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  86 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  87 #endif
  88
  89 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  90 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  91 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  92 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  93 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  94 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  95 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  96 #define CONFIG_PCIE3                    /* PCIE controller 3 */
  97 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  98 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  99
 100 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
 101
 102 #define CONFIG_ENV_OVERWRITE
 103
 104 /*
 105  * These can be toggled for performance analysis, otherwise use default.
 106  */
 107 #define CONFIG_SYS_CACHE_STASHING
 108 #define CONFIG_BTB                      /* toggle branch predition */
 109 #ifdef CONFIG_DDR_ECC
 110 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 111 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 112 #endif
 113
 114 #define CONFIG_ENABLE_36BIT_PHYS
 115
 116 #define CONFIG_ADDR_MAP
 117 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 118
 119 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 120 #define CONFIG_SYS_MEMTEST_END          0x00400000
 121 #define CONFIG_SYS_ALT_MEMTEST
 122 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 123
 124 /*
 125  *  Config the L3 Cache as L3 SRAM
 126  */
 127 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 128 #define CONFIG_SYS_L3_SIZE              (512 << 10)
 129 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 130 #ifdef CONFIG_RAMBOOT_PBL
 131 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 132 #endif
 133 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 134 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (50 << 10)
 135 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 136 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 137
 138 #define CONFIG_SYS_DCSRBAR              0xf0000000
 139 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 140
 141 /*
 142  * DDR Setup
 143  */
 144 #define CONFIG_VERY_BIG_RAM
 145 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 146 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 147
 148 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 149 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 150 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
 151 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
 152
 153 #define CONFIG_DDR_SPD
 154 #define CONFIG_SYS_FSL_DDR3
 155
 156 /*
 157  * IFC Definitions
 158  */
 159 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 160 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 161
 162 #ifdef CONFIG_SPL_BUILD
 163 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 164 #else
 165 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 166 #endif
 167
 168 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 169 #define CONFIG_MISC_INIT_R
 170
 171 #define CONFIG_HWCONFIG
 172
 173 /* define to use L1 as initial stack */
 174 #define CONFIG_L1_INIT_RAM
 175 #define CONFIG_SYS_INIT_RAM_LOCK
 176 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 177 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 178 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 179 /* The assembler doesn't like typecast */
 180 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 181         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 182           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 183 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 184
 185 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 186                                         GENERATED_GBL_DATA_SIZE)
 187 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 188
 189 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 190 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 191
 192 /* Serial Port - controlled on board with jumper J8
 193  * open - index 2
 194  * shorted - index 1
 195  */
 196 #define CONFIG_CONS_INDEX       1
 197 #define CONFIG_SYS_NS16550_SERIAL
 198 #define CONFIG_SYS_NS16550_REG_SIZE     1
 199 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 200
 201 #define CONFIG_SYS_BAUDRATE_TABLE       \
 202         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 203
 204 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 205 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 206 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 207 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 208
 209 /* I2C */
 210 #define CONFIG_SYS_I2C
 211 #define CONFIG_SYS_I2C_FSL
 212 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 213 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 214 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 215 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 216
 217 /*
 218  * General PCI
 219  * Memory space is mapped 1-1, but I/O space must start from 0.
 220  */
 221
 222 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 223 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 224 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 225 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 226 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 227 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 228 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 229 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 230 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 231
 232 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 233 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 234 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 235 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 236 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 237 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 238 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 239 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 240 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 241
 242 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 243 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 244 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 245 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 246 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 247 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 248 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 249 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 250 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 251
 252 /* controller 4, Base address 203000 */
 253 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 254 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 255 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 256 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 257 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 258 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 259
 260 #ifdef CONFIG_PCI
 261 #define CONFIG_PCI_INDIRECT_BRIDGE
 262 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 263
 264 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 265 #define CONFIG_DOS_PARTITION
 266 #endif  /* CONFIG_PCI */
 267
 268 /* SATA */
 269 #ifdef CONFIG_FSL_SATA_V2
 270 #define CONFIG_LIBATA
 271 #define CONFIG_FSL_SATA
 272
 273 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 274 #define CONFIG_SATA1
 275 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 276 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 277 #define CONFIG_SATA2
 278 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 279 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 280
 281 #define CONFIG_LBA48
 282 #define CONFIG_CMD_SATA
 283 #define CONFIG_DOS_PARTITION
 284 #endif
 285
 286 #ifdef CONFIG_FMAN_ENET
 287 #define CONFIG_MII              /* MII PHY management */
 288 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 289 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 290 #endif
 291
 292 /*
 293  * Environment
 294  */
 295 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 296 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 297
 298 /*
 299  * Command line configuration.
 300  */
 301 #define CONFIG_CMD_ERRATA
 302 #define CONFIG_CMD_IRQ
 303
 304 #ifdef CONFIG_PCI
 305 #define CONFIG_CMD_PCI
 306 #endif
 307
 308 /*
 309  * Miscellaneous configurable options
 310  */
 311 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 312 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 313 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 314 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 315 #ifdef CONFIG_CMD_KGDB
 316 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 317 #else
 318 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 319 #endif
 320 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 321 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 322 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 323
 324 /*
 325  * For booting Linux, the board info and command line data
 326  * have to be in the first 64 MB of memory, since this is
 327  * the maximum mapped by the Linux kernel during initialization.
 328  */
 329 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 330 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 331
 332 #ifdef CONFIG_CMD_KGDB
 333 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 334 #endif
 335
 336 /*
 337  * Environment Configuration
 338  */
 339 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 340 #define CONFIG_BOOTFILE         "uImage"
 341 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 342
 343 /* default location for tftp and bootm */
 344 #define CONFIG_LOADADDR         1000000
 345
 346 #define CONFIG_BAUDRATE 115200
 347
 348 #define CONFIG_HVBOOT                                   \
 349         "setenv bootargs config-addr=0x60000000; "      \
 350         "bootm 0x01000000 - 0x00f00000"
 351
 352 #ifdef CONFIG_SYS_NO_FLASH
 353 #ifndef CONFIG_RAMBOOT_PBL
 354 #define CONFIG_ENV_IS_NOWHERE
 355 #endif
 356 #else
 357 #define CONFIG_FLASH_CFI_DRIVER
 358 #define CONFIG_SYS_FLASH_CFI
 359 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 360 #endif
 361
 362 #if defined(CONFIG_SPIFLASH)
 363 #define CONFIG_SYS_EXTRA_ENV_RELOC
 364 #define CONFIG_ENV_IS_IN_SPI_FLASH
 365 #define CONFIG_ENV_SPI_BUS              0
 366 #define CONFIG_ENV_SPI_CS               0
 367 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 368 #define CONFIG_ENV_SPI_MODE             0
 369 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 370 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 371 #define CONFIG_ENV_SECT_SIZE            0x10000
 372 #elif defined(CONFIG_SDCARD)
 373 #define CONFIG_SYS_EXTRA_ENV_RELOC
 374 #define CONFIG_ENV_IS_IN_MMC
 375 #define CONFIG_SYS_MMC_ENV_DEV          0
 376 #define CONFIG_ENV_SIZE                 0x2000
 377 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 378 #elif defined(CONFIG_NAND)
 379 #define CONFIG_SYS_EXTRA_ENV_RELOC
 380 #define CONFIG_ENV_IS_IN_NAND
 381 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
 382 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 383 #elif defined(CONFIG_ENV_IS_NOWHERE)
 384 #define CONFIG_ENV_SIZE         0x2000
 385 #else
 386 #define CONFIG_ENV_IS_IN_FLASH
 387 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 388 #define CONFIG_ENV_SIZE         0x2000
 389 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 390 #endif
 391
 392 #define CONFIG_SYS_CLK_FREQ     66666666
 393 #define CONFIG_DDR_CLK_FREQ     133333333
 394
 395 #ifndef __ASSEMBLY__
 396 unsigned long get_board_sys_clk(void);
 397 unsigned long get_board_ddr_clk(void);
 398 #endif
 399
 400 /*
 401  * DDR Setup
 402  */
 403 #define CONFIG_SYS_SPD_BUS_NUM  0
 404 #define SPD_EEPROM_ADDRESS1     0x52
 405 #define SPD_EEPROM_ADDRESS2     0x54
 406 #define SPD_EEPROM_ADDRESS3     0x56
 407 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 408 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 409
 410 /*
 411  * IFC Definitions
 412  */
 413 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 414 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 415                                 + 0x8000000) | \
 416                                 CSPR_PORT_SIZE_16 | \
 417                                 CSPR_MSEL_NOR | \
 418                                 CSPR_V)
 419 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 420 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 421                                 CSPR_PORT_SIZE_16 | \
 422                                 CSPR_MSEL_NOR | \
 423                                 CSPR_V)
 424 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 425 /* NOR Flash Timing Params */
 426 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 427
 428 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 429                                 FTIM0_NOR_TEADC(0x5) | \
 430                                 FTIM0_NOR_TEAHC(0x5))
 431 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 432                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 433                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 434 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 435                                 FTIM2_NOR_TCH(0x4) | \
 436                                 FTIM2_NOR_TWPH(0x0E) | \
 437                                 FTIM2_NOR_TWP(0x1c))
 438 #define CONFIG_SYS_NOR_FTIM3    0x0
 439
 440 #define CONFIG_SYS_FLASH_QUIET_TEST
 441 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 442
 443 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 444 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 445 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 446 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 447
 448 #define CONFIG_SYS_FLASH_EMPTY_INFO
 449 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 450                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 451
 452 /* NAND Flash on IFC */
 453 #define CONFIG_NAND_FSL_IFC
 454 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 455 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 456 #define CONFIG_SYS_NAND_BASE            0xff800000
 457 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 458
 459 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 460 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 461                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 462                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 463                                 | CSPR_V)
 464 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 465
 466 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 467                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 468                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 469                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 470                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 471                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 472                                 | CSOR_NAND_PB(128))    /*Page Per Block = 128*/
 473
 474 #define CONFIG_SYS_NAND_ONFI_DETECTION
 475
 476 /* ONFI NAND Flash mode0 Timing Params */
 477 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 478                                         FTIM0_NAND_TWP(0x18)   | \
 479                                         FTIM0_NAND_TWCHT(0x07) | \
 480                                         FTIM0_NAND_TWH(0x0a))
 481 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 482                                         FTIM1_NAND_TWBE(0x39)  | \
 483                                         FTIM1_NAND_TRR(0x0e)   | \
 484                                         FTIM1_NAND_TRP(0x18))
 485 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 486                                         FTIM2_NAND_TREH(0x0a) | \
 487                                         FTIM2_NAND_TWHRE(0x1e))
 488 #define CONFIG_SYS_NAND_FTIM3           0x0
 489
 490 #define CONFIG_SYS_NAND_DDR_LAW         11
 491 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 492 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 493 #define CONFIG_CMD_NAND
 494
 495 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 496
 497 #if defined(CONFIG_NAND)
 498 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 499 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 500 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 501 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 502 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 503 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 504 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 505 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 506 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 507 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 508 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 509 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 510 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 511 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 512 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 513 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 514 #else
 515 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 516 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 517 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 518 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 519 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 520 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 521 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 522 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 523 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 524 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 525 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 526 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 527 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 528 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 529 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 530 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 531 #endif
 532 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 533 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 534 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 535 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 536 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 537 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 538 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 539 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 540
 541 /* CPLD on IFC */
 542 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 543 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 544 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 545 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 546                                 | CSPR_PORT_SIZE_8 \
 547                                 | CSPR_MSEL_GPCM \
 548                                 | CSPR_V)
 549
 550 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 551 #define CONFIG_SYS_CSOR3        0x0
 552
 553 /* CPLD Timing parameters for IFC CS3 */
 554 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 555                                         FTIM0_GPCM_TEADC(0x0e) | \
 556                                         FTIM0_GPCM_TEAHC(0x0e))
 557 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 558                                         FTIM1_GPCM_TRAD(0x1f))
 559 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 560                                         FTIM2_GPCM_TCH(0x8) | \
 561                                         FTIM2_GPCM_TWP(0x1f))
 562 #define CONFIG_SYS_CS3_FTIM3            0x0
 563
 564 #if defined(CONFIG_RAMBOOT_PBL)
 565 #define CONFIG_SYS_RAMBOOT
 566 #endif
 567
 568 /* I2C */
 569 #define CONFIG_SYS_FSL_I2C_SPEED        100000  /* I2C speed */
 570 #define CONFIG_SYS_FSL_I2C2_SPEED       100000  /* I2C2 speed */
 571 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* I2C bus multiplexer,primary */
 572 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* I2C bus multiplexer,secondary */
 573
 574 #define I2C_MUX_CH_DEFAULT      0x8
 575 #define I2C_MUX_CH_VOL_MONITOR  0xa
 576 #define I2C_MUX_CH_VSC3316_FS   0xc
 577 #define I2C_MUX_CH_VSC3316_BS   0xd
 578
 579 /* Voltage monitor on channel 2*/
 580 #define I2C_VOL_MONITOR_ADDR            0x40
 581 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 582 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 583 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 584
 585 #define CONFIG_VID_FLS_ENV              "t4240rdb_vdd_mv"
 586 #ifndef CONFIG_SPL_BUILD
 587 #define CONFIG_VID
 588 #endif
 589 #define CONFIG_VOL_MONITOR_IR36021_SET
 590 #define CONFIG_VOL_MONITOR_IR36021_READ
 591 /* The lowest and highest voltage allowed for T4240RDB */
 592 #define VDD_MV_MIN                      819
 593 #define VDD_MV_MAX                      1212
 594
 595 /*
 596  * eSPI - Enhanced SPI
 597  */
 598 #define CONFIG_SF_DEFAULT_SPEED         10000000
 599 #define CONFIG_SF_DEFAULT_MODE          0
 600
 601 /* Qman/Bman */
 602 #ifndef CONFIG_NOBQFMAN
 603 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 604 #define CONFIG_SYS_BMAN_NUM_PORTALS     50
 605 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 606 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 607 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 608 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 609 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 610 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 611 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 612 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 613                                         CONFIG_SYS_BMAN_CENA_SIZE)
 614 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 615 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 616 #define CONFIG_SYS_QMAN_NUM_PORTALS     50
 617 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 618 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 619 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 620 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 621 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 622 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 623 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 624 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 625                                         CONFIG_SYS_QMAN_CENA_SIZE)
 626 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 627 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 628
 629 #define CONFIG_SYS_DPAA_FMAN
 630 #define CONFIG_SYS_DPAA_PME
 631 #define CONFIG_SYS_PMAN
 632 #define CONFIG_SYS_DPAA_DCE
 633 #define CONFIG_SYS_DPAA_RMAN
 634 #define CONFIG_SYS_INTERLAKEN
 635
 636 /* Default address of microcode for the Linux Fman driver */
 637 #if defined(CONFIG_SPIFLASH)
 638 /*
 639  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 640  * env, so we got 0x110000.
 641  */
 642 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 643 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 644 #elif defined(CONFIG_SDCARD)
 645 /*
 646  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 647  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 648  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 649  */
 650 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 651 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 652 #elif defined(CONFIG_NAND)
 653 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 654 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 655 #else
 656 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 657 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
 658 #endif
 659 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 660 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 661 #endif /* CONFIG_NOBQFMAN */
 662
 663 #ifdef CONFIG_SYS_DPAA_FMAN
 664 #define CONFIG_FMAN_ENET
 665 #define CONFIG_PHYLIB_10G
 666 #define CONFIG_PHY_VITESSE
 667 #define CONFIG_PHY_CORTINA
 668 #define CONFIG_SYS_CORTINA_FW_IN_NOR
 669 #define CONFIG_CORTINA_FW_ADDR          0xefe00000
 670 #define CONFIG_CORTINA_FW_LENGTH        0x40000
 671 #define CONFIG_PHY_TERANETICS
 672 #define SGMII_PHY_ADDR1 0x0
 673 #define SGMII_PHY_ADDR2 0x1
 674 #define SGMII_PHY_ADDR3 0x2
 675 #define SGMII_PHY_ADDR4 0x3
 676 #define SGMII_PHY_ADDR5 0x4
 677 #define SGMII_PHY_ADDR6 0x5
 678 #define SGMII_PHY_ADDR7 0x6
 679 #define SGMII_PHY_ADDR8 0x7
 680 #define FM1_10GEC1_PHY_ADDR     0x10
 681 #define FM1_10GEC2_PHY_ADDR     0x11
 682 #define FM2_10GEC1_PHY_ADDR     0x12
 683 #define FM2_10GEC2_PHY_ADDR     0x13
 684 #define CORTINA_PHY_ADDR1       FM1_10GEC1_PHY_ADDR
 685 #define CORTINA_PHY_ADDR2       FM1_10GEC2_PHY_ADDR
 686 #define CORTINA_PHY_ADDR3       FM2_10GEC1_PHY_ADDR
 687 #define CORTINA_PHY_ADDR4       FM2_10GEC2_PHY_ADDR
 688 #endif
 689
 690 /* SATA */
 691 #ifdef CONFIG_FSL_SATA_V2
 692 #define CONFIG_LIBATA
 693 #define CONFIG_FSL_SATA
 694
 695 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 696 #define CONFIG_SATA1
 697 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 698 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 699 #define CONFIG_SATA2
 700 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 701 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 702
 703 #define CONFIG_LBA48
 704 #define CONFIG_CMD_SATA
 705 #define CONFIG_DOS_PARTITION
 706 #endif
 707
 708 #ifdef CONFIG_FMAN_ENET
 709 #define CONFIG_MII              /* MII PHY management */
 710 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 711 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 712 #endif
 713
 714 /*
 715 * USB
 716 */
 717 #define CONFIG_USB_EHCI
 718 #define CONFIG_USB_EHCI_FSL
 719 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 720 #define CONFIG_HAS_FSL_DR_USB
 721
 722 #define CONFIG_MMC
 723
 724 #ifdef CONFIG_MMC
 725 #define CONFIG_FSL_ESDHC
 726 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 727 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 728 #define CONFIG_GENERIC_MMC
 729 #define CONFIG_DOS_PARTITION
 730 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 731 #endif
 732
 733 /* Hash command with SHA acceleration supported in hardware */
 734 #ifdef CONFIG_FSL_CAAM
 735 #define CONFIG_CMD_HASH
 736 #define CONFIG_SHA_HW_ACCEL
 737 #endif
 738
 739
 740 #define __USB_PHY_TYPE  utmi
 741
 742 /*
 743  * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
 744  * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
 745  * interleaving. It can be cacheline, page, bank, superbank.
 746  * See doc/README.fsl-ddr for details.
 747  */
 748 #ifdef CONFIG_PPC_T4240
 749 #define CTRL_INTLV_PREFERED 3way_4KB
 750 #else
 751 #define CTRL_INTLV_PREFERED cacheline
 752 #endif
 753
 754 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 755         "hwconfig=fsl_ddr:"                                     \
 756         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 757         "bank_intlv=auto;"                                      \
 758         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 759         "netdev=eth0\0"                                         \
 760         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 761         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 762         "tftpflash=tftpboot $loadaddr $uboot && "               \
 763         "protect off $ubootaddr +$filesize && "                 \
 764         "erase $ubootaddr +$filesize && "                       \
 765         "cp.b $loadaddr $ubootaddr $filesize && "               \
 766         "protect on $ubootaddr +$filesize && "                  \
 767         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 768         "consoledev=ttyS0\0"                                    \
 769         "ramdiskaddr=2000000\0"                                 \
 770         "ramdiskfile=t4240rdb/ramdisk.uboot\0"                  \
 771         "fdtaddr=1e00000\0"                                     \
 772         "fdtfile=t4240rdb/t4240rdb.dtb\0"                       \
 773         "bdev=sda3\0"
 774
 775 #define CONFIG_HVBOOT                                   \
 776         "setenv bootargs config-addr=0x60000000; "      \
 777         "bootm 0x01000000 - 0x00f00000"
 778
 779 #define CONFIG_LINUX                                    \
 780         "setenv bootargs root=/dev/ram rw "             \
 781         "console=$consoledev,$baudrate $othbootargs;"   \
 782         "setenv ramdiskaddr 0x02000000;"                \
 783         "setenv fdtaddr 0x00c00000;"                    \
 784         "setenv loadaddr 0x1000000;"                    \
 785         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 786
 787 #define CONFIG_HDBOOT                                   \
 788         "setenv bootargs root=/dev/$bdev rw "           \
 789         "console=$consoledev,$baudrate $othbootargs;"   \
 790         "tftp $loadaddr $bootfile;"                     \
 791         "tftp $fdtaddr $fdtfile;"                       \
 792         "bootm $loadaddr - $fdtaddr"
 793
 794 #define CONFIG_NFSBOOTCOMMAND                   \
 795         "setenv bootargs root=/dev/nfs rw "     \
 796         "nfsroot=$serverip:$rootpath "          \
 797         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 798         "console=$consoledev,$baudrate $othbootargs;"   \
 799         "tftp $loadaddr $bootfile;"             \
 800         "tftp $fdtaddr $fdtfile;"               \
 801         "bootm $loadaddr - $fdtaddr"
 802
 803 #define CONFIG_RAMBOOTCOMMAND                           \
 804         "setenv bootargs root=/dev/ram rw "             \
 805         "console=$consoledev,$baudrate $othbootargs;"   \
 806         "tftp $ramdiskaddr $ramdiskfile;"               \
 807         "tftp $loadaddr $bootfile;"                     \
 808         "tftp $fdtaddr $fdtfile;"                       \
 809         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 810
 811 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 812
 813 #include <asm/fsl_secure_boot.h>
 814
 815 #endif  /* __CONFIG_H */