git.sur5r.net Git - u-boot/blob - include/configs/advantech_dms-ba16.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2016 Timesys Corporation
   4  * Copyright (C) 2016 Advantech Corporation
   5  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   6  */
   7
   8 #ifndef __ADVANTECH_DMSBA16_CONFIG_H
   9 #define __ADVANTECH_DMSBA16_CONFIG_H
  10
  11 #include <asm/arch/imx-regs.h>
  12 #include <asm/mach-imx/gpio.h>
  13
  14 #define CONFIG_BOARD_NAME       "Advantech DMS-BA16"
  15
  16 #define CONFIG_MXC_UART_BASE    UART4_BASE
  17 #define CONSOLE_DEV     "ttymxc3"
  18 #define CONFIG_EXTRA_BOOTARGS   "panic=10"
  19
  20 #define CONFIG_BOOT_DIR ""
  21 #define CONFIG_LOADCMD "fatload"
  22 #define CONFIG_RFSPART "2"
  23
  24 #define CONFIG_SUPPORT_EMMC_BOOT
  25
  26 #include "mx6_common.h"
  27 #include <linux/sizes.h>
  28
  29 #define CONFIG_CMDLINE_TAG
  30 #define CONFIG_SETUP_MEMORY_TAGS
  31 #define CONFIG_INITRD_TAG
  32 #define CONFIG_REVISION_TAG
  33 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  34
  35 #define CONFIG_MXC_UART
  36
  37 #define CONFIG_MXC_OCOTP
  38
  39 /* SATA Configs */
  40 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  41 #define CONFIG_DWC_AHSATA_PORT_ID       0
  42 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  43 #define CONFIG_LBA48
  44
  45 /* MMC Configs */
  46 #define CONFIG_FSL_USDHC
  47 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  48
  49 /* USB Configs */
  50 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  51 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  52 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  53 #define CONFIG_MXC_USB_FLAGS    0
  54
  55 #define CONFIG_USBD_HS
  56
  57 /* Networking Configs */
  58 #define CONFIG_FEC_MXC
  59 #define CONFIG_MII
  60 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  61 #define CONFIG_FEC_XCV_TYPE             RGMII
  62 #define CONFIG_ETHPRIME         "FEC"
  63 #define CONFIG_FEC_MXC_PHYADDR          4
  64 #define CONFIG_PHY_ATHEROS
  65
  66 /* Serial Flash */
  67 #ifdef CONFIG_CMD_SF
  68 #define CONFIG_SF_DEFAULT_BUS           0
  69 #define CONFIG_SF_DEFAULT_CS            0
  70 #define CONFIG_SF_DEFAULT_SPEED 20000000
  71 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  72 #endif
  73
  74 /* allow to overwrite serial and ethaddr */
  75 #define CONFIG_ENV_OVERWRITE
  76
  77 #define CONFIG_LOADADDR 0x12000000
  78
  79 #define CONFIG_EXTRA_ENV_SETTINGS \
  80         "script=boot.scr\0" \
  81         "image=" CONFIG_BOOT_DIR "/uImage\0" \
  82         "uboot=u-boot.imx\0" \
  83         "fdt_file=" CONFIG_BOOT_DIR "/" CONFIG_DEFAULT_FDT_FILE "\0" \
  84         "fdt_addr=0x18000000\0" \
  85         "boot_fdt=yes\0" \
  86         "ip_dyn=yes\0" \
  87         "console=" CONSOLE_DEV "\0" \
  88         "fdt_high=0xffffffff\0"   \
  89         "initrd_high=0xffffffff\0" \
  90         "sddev=0\0" \
  91         "emmcdev=1\0" \
  92         "partnum=1\0" \
  93         "loadcmd=" CONFIG_LOADCMD "\0" \
  94         "rfspart=" CONFIG_RFSPART "\0" \
  95         "update_sd_firmware=" \
  96                 "if test ${ip_dyn} = yes; then " \
  97                         "setenv get_cmd dhcp; " \
  98                 "else " \
  99                         "setenv get_cmd tftp; " \
 100                 "fi; " \
 101                 "if mmc dev ${mmcdev}; then "   \
 102                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 103                                 "setexpr fw_sz ${filesize} / 0x200; " \
 104                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 105                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 106                         "fi; "  \
 107                 "fi\0" \
 108         "update_sf_uboot=" \
 109                 "if tftp $loadaddr $uboot; then " \
 110                         "sf probe; " \
 111                         "sf erase 0 0xC0000; " \
 112                         "sf write $loadaddr 0x400 $filesize; " \
 113                         "echo 'U-Boot upgraded. Please reset'; " \
 114                 "fi\0" \
 115         "setargs=setenv bootargs console=${console},${baudrate} " \
 116                 "root=/dev/${rootdev} rw rootwait " CONFIG_EXTRA_BOOTARGS "\0" \
 117         "loadbootscript=" \
 118                 "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
 119         "bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
 120                 " source\0" \
 121         "loadimage=" \
 122                 "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
 123         "loadfdt=${loadcmd} ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
 124         "tryboot=" \
 125                 "if run loadbootscript; then " \
 126                         "run bootscript; " \
 127                 "else " \
 128                         "if run loadimage; then " \
 129                                 "run doboot; " \
 130                         "fi; " \
 131                 "fi;\0" \
 132         "doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
 133                 "run setargs; " \
 134                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 135                         "if run loadfdt; then " \
 136                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 137                         "else " \
 138                                 "if test ${boot_fdt} = try; then " \
 139                                         "bootm; " \
 140                                 "else " \
 141                                         "echo WARN: Cannot load the DT; " \
 142                                 "fi; " \
 143                         "fi; " \
 144                 "else " \
 145                         "bootm; " \
 146                 "fi;\0" \
 147         "netargs=setenv bootargs console=${console},${baudrate} " \
 148                 "root=/dev/nfs " \
 149                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 150         "netboot=echo Booting from net ...; " \
 151                 "run netargs; " \
 152                 "if test ${ip_dyn} = yes; then " \
 153                         "setenv get_cmd dhcp; " \
 154                 "else " \
 155                         "setenv get_cmd tftp; " \
 156                 "fi; " \
 157                 "${get_cmd} ${image}; " \
 158                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 159                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 160                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 161                         "else " \
 162                                 "if test ${boot_fdt} = try; then " \
 163                                         "bootm; " \
 164                                 "else " \
 165                                         "echo WARN: Cannot load the DT; " \
 166                                 "fi; " \
 167                         "fi; " \
 168                 "else " \
 169                         "bootm; " \
 170                 "fi;\0" \
 171
 172 #define CONFIG_BOOTCOMMAND \
 173         "usb start; " \
 174         "setenv dev usb; " \
 175         "setenv devnum 0; " \
 176         "setenv rootdev sda${rfspart}; " \
 177         "run tryboot; " \
 178         \
 179         "setenv dev mmc; " \
 180         "setenv rootdev mmcblk0p${rfspart}; " \
 181         \
 182         "setenv devnum ${sddev}; " \
 183         "if mmc dev ${devnum}; then " \
 184                 "run tryboot; " \
 185         "fi; " \
 186         \
 187         "setenv devnum ${emmcdev}; " \
 188         "setenv rootdev mmcblk${emmcdev}p${rfspart}; " \
 189         "if mmc dev ${devnum}; then " \
 190                 "run tryboot; " \
 191         "fi; " \
 192         \
 193         "bmode usb; " \
 194
 195 #define CONFIG_ARP_TIMEOUT     200UL
 196
 197 /* Miscellaneous configurable options */
 198
 199 #define CONFIG_SYS_MEMTEST_START       0x10000000
 200 #define CONFIG_SYS_MEMTEST_END         0x10010000
 201 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 202
 203 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 204
 205 /* Physical Memory Map */
 206 #define CONFIG_NR_DRAM_BANKS           1
 207 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 208
 209 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 210 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 211 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 212
 213 #define CONFIG_SYS_INIT_SP_OFFSET \
 214         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 215 #define CONFIG_SYS_INIT_SP_ADDR \
 216         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 217
 218 /* FLASH and environment organization */
 219
 220 #define CONFIG_ENV_SIZE                 (8 * 1024)
 221 #define CONFIG_ENV_OFFSET               (768 * 1024)
 222 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
 223 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 224 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 225 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 226 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 227
 228 #define CONFIG_SYS_FSL_USDHC_NUM        3
 229
 230 /* Framebuffer */
 231 #ifdef CONFIG_VIDEO
 232 #define CONFIG_VIDEO_IPUV3
 233 #define CONFIG_VIDEO_BMP_RLE8
 234 #define CONFIG_SPLASH_SCREEN
 235 #define CONFIG_SPLASH_SCREEN_ALIGN
 236 #define CONFIG_BMP_16BPP
 237 #define CONFIG_VIDEO_LOGO
 238 #define CONFIG_VIDEO_BMP_LOGO
 239 #define CONFIG_IMX_HDMI
 240 #define CONFIG_IMX_VIDEO_SKIP
 241 #endif
 242
 243 #define CONFIG_PWM_IMX
 244 #define CONFIG_IMX6_PWM_PER_CLK         66000000
 245
 246 #ifdef CONFIG_CMD_PCI
 247 #define CONFIG_PCI_SCAN_SHOW
 248 #define CONFIG_PCIE_IMX
 249 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
 250 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(1, 5)
 251 #endif
 252
 253 /* I2C Configs */
 254 #define CONFIG_SYS_I2C
 255 #define CONFIG_SYS_I2C_MXC
 256 #define CONFIG_SYS_I2C_SPEED            100000
 257 #define CONFIG_SYS_I2C_MXC_I2C1
 258 #define CONFIG_SYS_I2C_MXC_I2C2
 259 #define CONFIG_SYS_I2C_MXC_I2C3
 260
 261 #endif  /* __ADVANTECH_DMSBA16_CONFIG_H */