]> git.sur5r.net Git - u-boot/blob - include/configs/at91sam9rlek.h
ARM: Drop unreferenced CONFIG_* defines named after boards
[u-boot] / include / configs / at91sam9rlek.h
1 /*
2  * (C) Copyright 2007-2008
3  * Stelian Pop <stelian@popies.net>
4  * Lead Tech Design <www.leadtechdesign.com>
5  *
6  * Configuation settings for the AT91SAM9RLEK board.
7  *
8  * SPDX-License-Identifier:     GPL-2.0+
9  */
10
11 #ifndef __CONFIG_H
12 #define __CONFIG_H
13
14 #include <asm/hardware.h>
15
16 /* ARM asynchronous clock */
17 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768           /* slow clock xtal */
18 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000        /* main clock xtal */
19
20 #define CONFIG_ARCH_CPU_INIT
21 #define CONFIG_SKIP_LOWLEVEL_INIT
22
23 #define CONFIG_CMDLINE_TAG              1       /* enable passing of ATAGs */
24 #define CONFIG_SETUP_MEMORY_TAGS        1
25 #define CONFIG_INITRD_TAG               1
26
27 #define CONFIG_ATMEL_LEGACY
28
29 /*
30  * Hardware drivers
31  */
32
33 /* LCD */
34 #define LCD_BPP                         LCD_COLOR8
35 #define CONFIG_LCD_LOGO                 1
36 #undef LCD_TEST_PATTERN
37 #define CONFIG_LCD_INFO                 1
38 #define CONFIG_LCD_INFO_BELOW_LOGO      1
39 #define CONFIG_ATMEL_LCD                1
40 #define CONFIG_ATMEL_LCD_RGB565         1
41 /* Let board_init_f handle the framebuffer allocation */
42 #undef CONFIG_FB_ADDR
43
44 /* SDRAM */
45 #define CONFIG_NR_DRAM_BANKS            1
46 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_CS1
47 #define CONFIG_SYS_SDRAM_SIZE           0x04000000
48
49 #define CONFIG_SYS_INIT_SP_ADDR \
50         (ATMEL_BASE_SRAM + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
51
52 /* NAND flash */
53 #ifdef CONFIG_CMD_NAND
54 #define CONFIG_NAND_ATMEL
55 #define CONFIG_SYS_MAX_NAND_DEVICE              1
56 #define CONFIG_SYS_NAND_BASE                    ATMEL_BASE_CS3
57 #define CONFIG_SYS_NAND_DBW_8                   1
58 /* our ALE is AD21 */
59 #define CONFIG_SYS_NAND_MASK_ALE                (1 << 21)
60 /* our CLE is AD22 */
61 #define CONFIG_SYS_NAND_MASK_CLE                (1 << 22)
62 #define CONFIG_SYS_NAND_ENABLE_PIN              AT91_PIN_PB6
63 #define CONFIG_SYS_NAND_READY_PIN               AT91_PIN_PD17
64
65 #endif
66
67 /* Ethernet - not present */
68
69 /* USB - not supported */
70
71 #define CONFIG_SYS_LOAD_ADDR                    0x22000000      /* load address */
72
73 #define CONFIG_SYS_MEMTEST_START                CONFIG_SYS_SDRAM_BASE
74 #define CONFIG_SYS_MEMTEST_END                  0x23e00000
75
76 #ifdef CONFIG_SYS_USE_DATAFLASH
77
78 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
79 #define CONFIG_ENV_OFFSET       0x4200
80 #define CONFIG_ENV_SIZE         0x4200
81 #define CONFIG_ENV_SECT_SIZE    0x210
82 #define CONFIG_ENV_SPI_MAX_HZ   15000000
83 #define CONFIG_BOOTCOMMAND      "sf probe 0; " \
84                                 "sf read 0x22000000 0x84000 0x294000; " \
85                                 "bootm 0x22000000"
86
87 #elif CONFIG_SYS_USE_NANDFLASH
88
89 /* bootstrap + u-boot + env + linux in nandflash */
90 #define CONFIG_ENV_OFFSET               0x120000
91 #define CONFIG_ENV_OFFSET_REDUND        0x100000
92 #define CONFIG_ENV_SIZE         0x20000         /* 1 sector = 128 kB */
93 #define CONFIG_BOOTCOMMAND      "nand read 0x22000000 0x200000 0x600000; "      \
94                                 "nand read 0x21000000 0x180000 0x80000; "       \
95                                 "bootz 0x22000000 - 0x21000000"
96
97 #else /* CONFIG_SYS_USE_MMC */
98
99 /* bootstrap + u-boot + env + linux in mmc */
100 #define CONFIG_ENV_SIZE         0x4000
101 #define CONFIG_BOOTCOMMAND      "fatload mmc 0:1 0x21000000 at91sam9rlek.dtb; " \
102                                 "fatload mmc 0:1 0x22000000 zImage; " \
103                                 "bootz 0x22000000 - 0x21000000"
104 #endif
105
106 /*
107  * Size of malloc() pool
108  */
109 #define CONFIG_SYS_MALLOC_LEN   ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
110
111 #endif