git.sur5r.net Git - u-boot/blob - include/configs/colibri_imx7.h

   1 /*
   2  * Copyright 2016 Toradex AG
   3  *
   4  * Configuration settings for the Colibri iMX7 module.
   5  *
   6  * based on mx7dsabresd.h:
   7  * Copyright (C) 2015 Freescale Semiconductor, Inc.
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef __COLIBRI_IMX7_CONFIG_H
  13 #define __COLIBRI_IMX7_CONFIG_H
  14
  15 #include "mx7_common.h"
  16
  17 #define CONFIG_SYS_THUMB_BUILD
  18 #define CONFIG_USE_ARCH_MEMCPY
  19 #define CONFIG_USE_ARCH_MEMSET
  20
  21 /*#define CONFIG_DBG_MONITOR*/
  22 #define PHYS_SDRAM_SIZE                 SZ_512M
  23
  24 #define CONFIG_BOARD_EARLY_INIT_F
  25 #define CONFIG_BOARD_LATE_INIT
  26
  27 #define CONFIG_DISPLAY_BOARDINFO_LATE
  28
  29 /* Size of malloc() pool */
  30 #define CONFIG_SYS_MALLOC_LEN           (32 * SZ_1M)
  31
  32 /* Uncomment to enable secure boot support */
  33 /* #define CONFIG_SECURE_BOOT */
  34 #define CONFIG_CSF_SIZE                 0x4000
  35
  36 #define CONFIG_CMD_BMODE
  37
  38 /* Network */
  39 #define CONFIG_FEC_MXC
  40 #define CONFIG_MII
  41 #define CONFIG_FEC_XCV_TYPE             RMII
  42 #define CONFIG_ETHPRIME                 "FEC"
  43 #define CONFIG_FEC_MXC_PHYADDR          0
  44
  45 #define CONFIG_PHYLIB
  46 #define CONFIG_PHY_MICREL
  47 #define CONFIG_TFTP_TSIZE
  48 #define CONFIG_IP_DEFRAG
  49 #define CONFIG_TFTP_BLOCKSIZE           16384
  50
  51 /* ENET1 */
  52 #define IMX_FEC_BASE                    ENET_IPS_BASE_ADDR
  53
  54 /* MMC Config*/
  55 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  56 #define CONFIG_SYS_FSL_USDHC_NUM        1
  57
  58 #undef CONFIG_BOOTM_PLAN9
  59 #undef CONFIG_BOOTM_RTEMS
  60
  61 /* I2C configs */
  62 #define CONFIG_SYS_I2C
  63 #define CONFIG_SYS_I2C_MXC
  64 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  65 #define CONFIG_SYS_I2C_SPEED            100000
  66
  67 #define CONFIG_IPADDR                   192.168.10.2
  68 #define CONFIG_NETMASK                  255.255.255.0
  69 #define CONFIG_SERVERIP                 192.168.10.1
  70
  71 #define MEM_LAYOUT_ENV_SETTINGS \
  72         "fdt_addr_r=0x82000000\0" \
  73         "fdt_high=0xffffffff\0" \
  74         "initrd_high=0xffffffff\0" \
  75         "kernel_addr_r=0x81000000\0" \
  76         "ramdisk_addr_r=0x82100000\0"
  77
  78 #define SD_BOOTCMD \
  79         "sdargs=root=/dev/mmcblk0p2 rw rootwait\0"      \
  80         "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \
  81         "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
  82         "run m4boot && " \
  83         "load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \
  84         "load mmc 0:1 ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
  85         "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
  86
  87 #define NFS_BOOTCMD \
  88         "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
  89         "nfsboot=run setup; " \
  90                 "setenv bootargs ${defargs} ${nfsargs} " \
  91                 "${setupargs} ${vidargs}; echo Booting from NFS...;" \
  92                 "dhcp ${kernel_addr_r} && "     \
  93                 "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
  94                 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
  95
  96 #define UBI_BOOTCMD     \
  97         "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
  98                 "ubi.fm_autoconvert=1\0" \
  99         "ubiboot=run setup; " \
 100                 "setenv bootargs ${defargs} ${ubiargs} " \
 101                 "${setupargs} ${vidargs}; echo Booting from NAND...; " \
 102                 "ubi part ubi && run m4boot && " \
 103                 "ubi read ${kernel_addr_r} kernel && " \
 104                 "ubi read ${fdt_addr_r} dtb && " \
 105                 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 106
 107 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
 108
 109 #define CONFIG_EXTRA_ENV_SETTINGS \
 110         MEM_LAYOUT_ENV_SETTINGS \
 111         NFS_BOOTCMD \
 112         SD_BOOTCMD \
 113         UBI_BOOTCMD \
 114         "console=ttymxc0\0" \
 115         "defargs=\0" \
 116         "fdt_board=eval-v3\0" \
 117         "fdt_fixup=;\0" \
 118         "m4boot=;\0" \
 119         "ip_dyn=yes\0" \
 120         "kernel_file=zImage\0" \
 121         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 122         "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 123                 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
 124                 "${board}/flash_eth.img && source ${loadaddr}\0" \
 125         "setsdupdate=mmc rescan && setenv interface mmc && " \
 126                 "fatload ${interface} 0:1 ${loadaddr} " \
 127                 "${board}/flash_blk.img && source ${loadaddr}\0" \
 128         "setup=setenv setupargs " \
 129                 "console=tty1 console=${console}" \
 130                 ",${baudrate}n8 ${memargs} consoleblank=0 ${mtdparts}\0" \
 131         "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
 132         "setusbupdate=usb start && setenv interface usb && " \
 133                 "fatload ${interface} 0:1 ${loadaddr} " \
 134                 "${board}/flash_blk.img && source ${loadaddr}\0" \
 135         "splashpos=m,m\0" \
 136         "videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \
 137
 138 /* Miscellaneous configurable options */
 139 #define CONFIG_SYS_LONGHELP
 140
 141 #define CONFIG_SYS_MEMTEST_START        0x80000000
 142 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x0c000000)
 143
 144 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 145 #define CONFIG_SYS_HZ                   1000
 146
 147 #define CONFIG_STACKSIZE                SZ_128K
 148
 149 /* Physical Memory Map */
 150 #define CONFIG_NR_DRAM_BANKS            1
 151 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 152
 153 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 154 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 155 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 156
 157 #define CONFIG_SYS_INIT_SP_OFFSET \
 158         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 159 #define CONFIG_SYS_INIT_SP_ADDR \
 160         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 161
 162 /* FLASH and environment organization */
 163 #define CONFIG_SYS_NO_FLASH
 164 #define CONFIG_ENV_IS_IN_NAND
 165
 166 #if defined(CONFIG_ENV_IS_IN_MMC)
 167 #define CONFIG_SYS_MMC_ENV_DEV          0   /* USDHC1 */
 168 #define CONFIG_SYS_MMC_ENV_PART         0       /* user area */
 169 #define CONFIG_MMCROOT                  "/dev/mmcblk0p2"  /* USDHC1 */
 170 #define CONFIG_ENV_OFFSET               (8 * SZ_64K)
 171 #elif defined(CONFIG_ENV_IS_IN_NAND)
 172 #define CONFIG_ENV_OFFSET               (4 * 1024 * 1024)
 173 #define CONFIG_ENV_SECT_SIZE            (128 * 1024)
 174 #define CONFIG_ENV_SIZE                 CONFIG_ENV_SECT_SIZE
 175 #endif
 176
 177 #define CONFIG_NAND_MXS
 178 #define CONFIG_CMD_NAND_TRIMFFS
 179
 180 /* NAND stuff */
 181 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 182 #define CONFIG_SYS_NAND_BASE            0x40000000
 183 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 184 #define CONFIG_SYS_NAND_ONFI_DETECTION
 185 #define CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES
 186 #define CONFIG_CMD_NAND_TORTURE
 187
 188 /* UBI stuff */
 189 #define CONFIG_RBTREE
 190 #define CONFIG_LZO
 191 #define CONFIG_CMD_UBI
 192 #define CONFIG_MTD_UBI_FASTMAP
 193 #define CONFIG_CMD_UBIFS        /* increases size by almost 60 KB */
 194
 195 /* Dynamic MTD partition support */
 196 #define CONFIG_CMD_MTDPARTS     /* Enable 'mtdparts' command line support */
 197 #define CONFIG_MTD_PARTITIONS
 198 #define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
 199 #define MTDIDS_DEFAULT          "nand0=gpmi-nand"
 200 #define MTDPARTS_DEFAULT        "mtdparts=gpmi-nand:"           \
 201                                 "512k(mx7-bcb),"                \
 202                                 "3584k(u-boot)ro,"              \
 203                                 "512k(u-boot-env),"             \
 204                                 "-(ubi)"
 205
 206 /* DMA stuff, needed for GPMI/MXS NAND support */
 207 #define CONFIG_APBH_DMA
 208 #define CONFIG_APBH_DMA_BURST
 209 #define CONFIG_APBH_DMA_BURST8
 210
 211 /* USB Configs */
 212 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 213
 214 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 215 #define CONFIG_MXC_USB_FLAGS            0
 216 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 217
 218 #define CONFIG_IMX_THERMAL
 219
 220 #define CONFIG_USBD_HS
 221
 222 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 223
 224 /* USB Device Firmware Update support */
 225 #define CONFIG_USB_FUNCTION_DFU
 226 #define CONFIG_DFU_MMC
 227 #define CONFIG_SYS_DFU_DATA_BUF_SIZE    SZ_16M
 228 #define DFU_DEFAULT_POLL_TIMEOUT        300
 229
 230 #define CONFIG_VIDEO
 231 #ifdef CONFIG_VIDEO
 232 #define CONFIG_CFB_CONSOLE
 233 #define CONFIG_VIDEO_MXS
 234 #define CONFIG_VIDEO_LOGO
 235 #define CONFIG_VIDEO_SW_CURSOR
 236 #define CONFIG_VGA_AS_SINGLE_DEVICE
 237 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 238 #define CONFIG_SPLASH_SCREEN
 239 #define CONFIG_SPLASH_SCREEN_ALIGN
 240 #define CONFIG_CMD_BMP
 241 #define CONFIG_BMP_16BPP
 242 #define CONFIG_VIDEO_BMP_RLE8
 243 #define CONFIG_VIDEO_BMP_LOGO
 244 #endif
 245
 246 #endif