git.sur5r.net Git - u-boot/blob - include/configs/controlcenterdc.h

   1 /*
   2  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
   3  * Copyright (C) 2016 Mario Six <mario.six@gdsys.cc>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef _CONFIG_CONTROLCENTERDC_H
   9 #define _CONFIG_CONTROLCENTERDC_H
  10
  11 /*
  12  * High Level Configuration Options (easy to change)
  13  */
  14 #define CONFIG_CUSTOMER_BOARD_SUPPORT
  15
  16 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  17 #define CONFIG_DISPLAY_BOARDINFO_LATE
  18 #define CONFIG_BOARD_LATE_INIT
  19 #define CONFIG_LAST_STAGE_INIT
  20
  21 /*
  22  * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
  23  * for DDR ECC byte filling in the SPL before loading the main
  24  * U-Boot into it.
  25  */
  26
  27 #define CONFIG_SYS_TCLK         250000000       /* 250MHz */
  28
  29 #define CONFIG_LOADADDR                 1000000
  30
  31 /*
  32  * Commands configuration
  33  */
  34 #define CONFIG_CMD_I2C
  35 #define CONFIG_CMD_SPI
  36
  37 /* SPI NOR flash default params, used by sf commands */
  38 #define CONFIG_SF_DEFAULT_BUS           1
  39 #define CONFIG_SF_DEFAULT_SPEED         1000000
  40 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_3
  41
  42 /*
  43  * SDIO/MMC Card Configuration
  44  */
  45 #define CONFIG_SYS_MMC_BASE             MVEBU_SDIO_BASE
  46
  47 /*
  48  * SATA/SCSI/AHCI configuration
  49  */
  50 #define CONFIG_SCSI_AHCI_PLAT
  51 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     2
  52 #define CONFIG_SYS_SCSI_MAX_LUN         1
  53 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  54                                          CONFIG_SYS_SCSI_MAX_LUN)
  55
  56 /* USB/EHCI configuration */
  57 #define CONFIG_EHCI_IS_TDI
  58
  59 /* Environment in SPI NOR flash */
  60 #define CONFIG_ENV_SPI_BUS              1
  61 #define CONFIG_ENV_OFFSET               (1 << 20) /* 1MiB in */
  62 #define CONFIG_ENV_SIZE                 (64 << 10) /* 64KiB */
  63 #define CONFIG_ENV_SECT_SIZE            (256 << 10) /* 256KiB sectors */
  64
  65 #define CONFIG_PHY_MARVELL              /* there is a marvell phy */
  66 #define PHY_ANEG_TIMEOUT        8000    /* PHY needs a longer aneg time */
  67
  68 /* PCIe support */
  69 #ifndef CONFIG_SPL_BUILD
  70 #define CONFIG_PCI
  71 #define CONFIG_PCI_MVEBU
  72 #define CONFIG_PCI_PNP
  73 #define CONFIG_PCI_SCAN_SHOW
  74 #endif
  75
  76 /*
  77  * Software (bit-bang) MII driver configuration
  78  */
  79 #define CONFIG_BITBANGMII               /* bit-bang MII PHY management */
  80 #define CONFIG_BITBANGMII_MULTI
  81
  82 /* SPL */
  83 /*
  84  * Select the boot device here
  85  *
  86  * Currently supported are:
  87  * SPL_BOOT_SPI_NOR_FLASH       - Booting via SPI NOR flash
  88  * SPL_BOOT_SDIO_MMC_CARD       - Booting via SDIO/MMC card (partition 1)
  89  */
  90 #define SPL_BOOT_SPI_NOR_FLASH          1
  91 #define SPL_BOOT_SDIO_MMC_CARD          2
  92 #define CONFIG_SPL_BOOT_DEVICE          SPL_BOOT_SPI_NOR_FLASH
  93
  94 /* Defines for SPL */
  95 #define CONFIG_SPL_SIZE                 (160 << 10)
  96
  97 #if defined(CONFIG_SECURED_MODE_IMAGE)
  98 #define CONFIG_SPL_TEXT_BASE            0x40002614
  99 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SPL_SIZE - 0x2614)
 100 #else
 101 #define CONFIG_SPL_TEXT_BASE            0x40000030
 102 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SPL_SIZE - 0x30)
 103 #endif
 104
 105 #define CONFIG_SPL_BSS_START_ADDR       (0x40000000 + CONFIG_SPL_SIZE)
 106 #define CONFIG_SPL_BSS_MAX_SIZE         (16 << 10)
 107
 108 #ifdef CONFIG_SPL_BUILD
 109 #define CONFIG_SYS_MALLOC_SIMPLE
 110 #endif
 111
 112 #define CONFIG_SPL_STACK                (0x40000000 + ((212 - 16) << 10))
 113 #define CONFIG_SPL_BOOTROM_SAVE         (CONFIG_SPL_STACK + 4)
 114
 115 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 116 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 117 #define CONFIG_SPL_SERIAL_SUPPORT
 118 #define CONFIG_SPL_I2C_SUPPORT
 119
 120 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
 121 /* SPL related SPI defines */
 122 #define CONFIG_SPL_SPI_LOAD
 123 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x30000
 124 #define CONFIG_SYS_U_BOOT_OFFS          CONFIG_SYS_SPI_U_BOOT_OFFS
 125 #endif
 126
 127 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
 128 /* SPL related MMC defines */
 129 #define CONFIG_SPL_MMC_SUPPORT
 130 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1
 131 #define CONFIG_SYS_MMC_U_BOOT_OFFS              (168 << 10)
 132 #define CONFIG_SYS_U_BOOT_OFFS                  CONFIG_SYS_MMC_U_BOOT_OFFS
 133 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR (CONFIG_SYS_U_BOOT_OFFS / 512)
 134 #ifdef CONFIG_SPL_BUILD
 135 #define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER       0x00180000      /* in SDRAM */
 136 #endif
 137 #endif
 138
 139 /*
 140  * Environment Configuration
 141  */
 142 #define CONFIG_ENV_OVERWRITE
 143
 144 #define CONFIG_BAUDRATE 115200
 145
 146 #define CONFIG_HOSTNAME         ccdc
 147 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 148 #define CONFIG_BOOTFILE         "ccdc.img"
 149
 150 #define CONFIG_PREBOOT          /* enable preboot variable */
 151
 152 #define CONFIG_EXTRA_ENV_SETTINGS                                               \
 153         "netdev=eth1\0"                                         \
 154         "consoledev=ttyS1\0"                                                    \
 155         "u-boot=u-boot.bin\0"                                                   \
 156         "bootfile_addr=1000000\0"                                               \
 157         "keyprogram_addr=3000000\0"                                             \
 158         "keyprogram_file=keyprogram.img\0"                                              \
 159         "fdtfile=controlcenterdc.dtb\0"                                         \
 160         "load=tftpboot ${loadaddr} ${u-boot}\0"                                 \
 161         "mmcdev=0:2\0"                                                          \
 162         "update=sf probe 1:0;"                                                  \
 163                 " sf erase 0 +${filesize};"                                     \
 164                 " sf write ${fileaddr} 0 ${filesize}\0"                         \
 165         "upd=run load update\0"                                                 \
 166         "fdt_high=0x10000000\0"                                                 \
 167         "initrd_high=0x10000000\0"                                              \
 168         "loadkeyprogram=tpm flush_keys;"                                        \
 169                 " mmc rescan;"                                                  \
 170                 " ext4load mmc ${mmcdev} ${keyprogram_addr} ${keyprogram_file};"\
 171                 " source ${keyprogram_addr}:script@1\0"                         \
 172         "gpio1=gpio@22_25\0"                                                    \
 173         "gpio2=A29\0"                                                           \
 174         "blinkseq='0 0 0 0 2 0 2 2 3 1 3 1 0 0 2 2 3 1 3 3 2 0 2 2 3 1 1 1 "    \
 175                   "2 0 2 2 3 1 3 1 0 0 2 0 3 3 3 1 2 0 0 0 3 1 1 1 0 0 0 0'\0"  \
 176         "bootfail=for i in ${blinkseq}; do"                                     \
 177                 " if test $i -eq 0; then"                                       \
 178                 " gpio clear ${gpio1}; gpio set ${gpio2};"                      \
 179                 " elif test $i -eq 1; then"                                     \
 180                 " gpio clear ${gpio1}; gpio clear ${gpio2};"                    \
 181                 " elif test $i -eq 2; then"                                     \
 182                 " gpio set ${gpio1}; gpio set ${gpio2};"                        \
 183                 " else;"                                                        \
 184                 " gpio clear ${gpio1}; gpio set ${gpio2};"                      \
 185                 " fi; sleep 0.12; done\0"
 186
 187 #define CONFIG_NFSBOOTCOMMAND                                                           \
 188         "setenv bootargs root=/dev/nfs rw "                                             \
 189         "nfsroot=${serverip}:${rootpath} "                                              \
 190         "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off "   \
 191         "console=${consoledev},${baudrate} ${othbootargs}; "                            \
 192         "tftpboot ${bootfile_addr} ${bootfile}; "                                               \
 193         "bootm ${bootfile_addr}"
 194
 195 #define CONFIG_MMCBOOTCOMMAND                                   \
 196         "setenv bootargs root=/dev/mmcblk0p3 rw rootwait "      \
 197         "console=${consoledev},${baudrate} ${othbootargs}; "    \
 198         "ext2load mmc 0:2 ${bootfile_addr} ${bootfile}; "       \
 199         "bootm ${bootfile_addr}"
 200
 201 #define CONFIG_BOOTCOMMAND                      \
 202         "if env exists keyprogram; then;"       \
 203         " setenv keyprogram; run nfsboot;"      \
 204         " fi;"                                  \
 205         " run dobootfail"
 206
 207 /*
 208  * mv-common.h should be defined after CMD configs since it used them
 209  * to enable certain macros
 210  */
 211 #include "mv-common.h"
 212
 213 #endif /* _CONFIG_CONTROLCENTERDC_H */