git.sur5r.net Git - u-boot/blob - include/configs/cyrus.h

   1 /*
   2  * Based on corenet_ds.h
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #define CONFIG_CYRUS
  11
  12 #if !defined(CONFIG_ARCH_P5020) && !defined(CONFIG_ARCH_P5040)
  13 #error Must call Cyrus CONFIG with a specific CPU enabled.
  14 #endif
  15
  16 #define CONFIG_SDCARD
  17 #define CONFIG_FSL_SATA_V2
  18 #define CONFIG_PCIE3
  19 #define CONFIG_PCIE4
  20 #ifdef CONFIG_ARCH_P5020
  21 #define CONFIG_SYS_FSL_RAID_ENGINE
  22 #define CONFIG_SYS_DPAA_RMAN
  23 #endif
  24 #define CONFIG_SYS_DPAA_PME
  25
  26 /*
  27  * Corenet DS style board configuration file
  28  */
  29 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  30 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  31 #define CONFIG_SYS_FSL_PBL_PBI board/varisys/cyrus/pbi.cfg
  32 #if defined(CONFIG_ARCH_P5020)
  33 #define CONFIG_SYS_CLK_FREQ 133000000
  34 #define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5020_v2.cfg
  35 #elif defined(CONFIG_ARCH_P5040)
  36 #define CONFIG_SYS_CLK_FREQ 100000000
  37 #define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5040.cfg
  38 #endif
  39
  40 /* High Level Configuration Options */
  41 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  42 #define CONFIG_MP                       /* support multiple processors */
  43
  44 #define CONFIG_SYS_MMC_MAX_DEVICE     1
  45
  46 #ifndef CONFIG_SYS_TEXT_BASE
  47 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  48 #endif
  49
  50 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  51 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  52 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  53 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  54 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  55 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  56
  57 #define CONFIG_ENV_OVERWRITE
  58
  59 #if defined(CONFIG_SDCARD)
  60 #define CONFIG_SYS_EXTRA_ENV_RELOC
  61 #define CONFIG_FSL_FIXED_MMC_LOCATION
  62 #define CONFIG_SYS_MMC_ENV_DEV          0
  63 #define CONFIG_ENV_SIZE                 0x2000
  64 #define CONFIG_ENV_OFFSET               (512 * 1658)
  65 #endif
  66
  67 /*
  68  * These can be toggled for performance analysis, otherwise use default.
  69  */
  70 #define CONFIG_SYS_CACHE_STASHING
  71 #define CONFIG_BACKSIDE_L2_CACHE
  72 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
  73 #define CONFIG_BTB                      /* toggle branch predition */
  74 #define CONFIG_DDR_ECC
  75 #ifdef CONFIG_DDR_ECC
  76 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  77 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  78 #endif
  79
  80 #define CONFIG_ENABLE_36BIT_PHYS
  81
  82 #ifdef CONFIG_PHYS_64BIT
  83 #define CONFIG_ADDR_MAP
  84 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
  85 #endif
  86
  87 /* test POST memory test */
  88 #undef CONFIG_POST
  89 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
  90 #define CONFIG_SYS_MEMTEST_END          0x00400000
  91 #define CONFIG_SYS_ALT_MEMTEST
  92
  93 /*
  94  *  Config the L3 Cache as L3 SRAM
  95  */
  96 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
  97 #ifdef CONFIG_PHYS_64BIT
  98 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE)
  99 #else
 100 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
 101 #endif
 102 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
 103 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
 104
 105 #ifdef CONFIG_PHYS_64BIT
 106 #define CONFIG_SYS_DCSRBAR              0xf0000000
 107 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 108 #endif
 109
 110 /*
 111  * DDR Setup
 112  */
 113 #define CONFIG_VERY_BIG_RAM
 114 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 115 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 116
 117 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 118 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 119
 120 #define CONFIG_DDR_SPD
 121
 122 #define CONFIG_SYS_SPD_BUS_NUM  1
 123 #define SPD_EEPROM_ADDRESS1     0x51
 124 #define SPD_EEPROM_ADDRESS2     0x52
 125 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 126
 127 /*
 128  * Local Bus Definitions
 129  */
 130
 131 #define CONFIG_SYS_LBC0_BASE            0xe0000000 /* Start of LBC Registers */
 132 #ifdef CONFIG_PHYS_64BIT
 133 #define CONFIG_SYS_LBC0_BASE_PHYS       0xfe0000000ull
 134 #else
 135 #define CONFIG_SYS_LBC0_BASE_PHYS       CONFIG_SYS_LBC0_BASE
 136 #endif
 137
 138 #define CONFIG_SYS_LBC1_BASE            0xe1000000 /* Start of LBC Registers */
 139 #ifdef CONFIG_PHYS_64BIT
 140 #define CONFIG_SYS_LBC1_BASE_PHYS       0xfe1000000ull
 141 #else
 142 #define CONFIG_SYS_LBC1_BASE_PHYS       CONFIG_SYS_LBC1_BASE
 143 #endif
 144
 145 /* Set the local bus clock 1/16 of platform clock */
 146 #define CONFIG_SYS_LBC_LCRR             (LCRR_CLKDIV_16 | LCRR_EADC_1)
 147
 148 #define CONFIG_SYS_BR0_PRELIM \
 149 (BR_PHYS_ADDR(CONFIG_SYS_LBC0_BASE_PHYS) | BR_PS_16 | BR_V)
 150 #define CONFIG_SYS_BR1_PRELIM \
 151 (BR_PHYS_ADDR(CONFIG_SYS_LBC1_BASE_PHYS) | BR_PS_16 | BR_V)
 152
 153 #define CONFIG_SYS_OR0_PRELIM   0xfff00010
 154 #define CONFIG_SYS_OR1_PRELIM   0xfff00010
 155
 156 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
 157
 158 #if defined(CONFIG_RAMBOOT_PBL)
 159 #define CONFIG_SYS_RAMBOOT
 160 #endif
 161
 162 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 163 #define CONFIG_MISC_INIT_R
 164
 165 #define CONFIG_HWCONFIG
 166
 167 /* define to use L1 as initial stack */
 168 #define CONFIG_L1_INIT_RAM
 169 #define CONFIG_SYS_INIT_RAM_LOCK
 170 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 171 #ifdef CONFIG_PHYS_64BIT
 172 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 173 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 174 /* The assembler doesn't like typecast */
 175 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 176         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 177           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 178 #else
 179 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
 180 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 181 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 182 #endif
 183 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000      /* Size of used area in RAM */
 184
 185 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 186 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 187
 188 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 189 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 190
 191 /* Serial Port - controlled on board with jumper J8
 192  * open - index 2
 193  * shorted - index 1
 194  */
 195 #define CONFIG_CONS_INDEX       1
 196 #define CONFIG_SYS_NS16550_SERIAL
 197 #define CONFIG_SYS_NS16550_REG_SIZE     1
 198 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 199
 200 #define CONFIG_SYS_BAUDRATE_TABLE       \
 201 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 202
 203 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 204 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 205 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 206 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 207
 208 /* I2C */
 209 #define CONFIG_SYS_I2C
 210 #define CONFIG_SYS_I2C_FSL
 211 #define CONFIG_I2C_MULTI_BUS
 212 #define CONFIG_I2C_CMD_TREE
 213 #define CONFIG_SYS_FSL_I2C_SPEED                400000  /* I2C speed and slave address */
 214 #define CONFIG_SYS_FSL_I2C_SLAVE                0x7F
 215 #define CONFIG_SYS_FSL_I2C_OFFSET               0x118000
 216 #define CONFIG_SYS_FSL_I2C2_SPEED               400000  /* I2C speed and slave address */
 217 #define CONFIG_SYS_FSL_I2C2_SLAVE               0x7F
 218 #define CONFIG_SYS_FSL_I2C2_OFFSET              0x118100
 219 #define CONFIG_SYS_FSL_I2C3_SPEED               400000  /* I2C speed and slave address */
 220 #define CONFIG_SYS_FSL_I2C3_SLAVE               0x7F
 221 #define CONFIG_SYS_FSL_I2C3_OFFSET              0x119000
 222 #define CONFIG_SYS_FSL_I2C4_SPEED               400000  /* I2C speed and slave address */
 223 #define CONFIG_SYS_FSL_I2C4_SLAVE               0x7F
 224 #define CONFIG_SYS_FSL_I2C4_OFFSET              0x119100
 225
 226 #define CONFIG_ID_EEPROM
 227 #define CONFIG_SYS_I2C_EEPROM_NXID
 228 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 229 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 230 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 231
 232 #define CONFIG_SYS_I2C_GENERIC_MAC
 233 #define CONFIG_SYS_I2C_MAC1_BUS 3
 234 #define CONFIG_SYS_I2C_MAC1_CHIP_ADDR 0x57
 235 #define CONFIG_SYS_I2C_MAC1_DATA_ADDR 0xf2
 236 #define CONFIG_SYS_I2C_MAC2_BUS 0
 237 #define CONFIG_SYS_I2C_MAC2_CHIP_ADDR 0x50
 238 #define CONFIG_SYS_I2C_MAC2_DATA_ADDR 0xfa
 239
 240 #define CONFIG_RTC_MCP79411             1
 241 #define CONFIG_SYS_RTC_BUS_NUM          3
 242 #define CONFIG_SYS_I2C_RTC_ADDR         0x6f
 243
 244 /*
 245  * eSPI - Enhanced SPI
 246  */
 247
 248 /*
 249  * General PCI
 250  * Memory space is mapped 1-1, but I/O space must start from 0.
 251  */
 252
 253 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 254 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 255 #ifdef CONFIG_PHYS_64BIT
 256 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 257 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 258 #else
 259 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 260 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 261 #endif
 262 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 263 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 264 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 265 #ifdef CONFIG_PHYS_64BIT
 266 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 267 #else
 268 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 269 #endif
 270 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 271
 272 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 273 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 274 #ifdef CONFIG_PHYS_64BIT
 275 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 276 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 277 #else
 278 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 279 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 280 #endif
 281 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 282 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 283 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 284 #ifdef CONFIG_PHYS_64BIT
 285 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 286 #else
 287 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 288 #endif
 289 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 290
 291 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 292 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 293 #ifdef CONFIG_PHYS_64BIT
 294 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 295 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 296 #else
 297 #define CONFIG_SYS_PCIE3_MEM_BUS        0xc0000000
 298 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc0000000
 299 #endif
 300 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 301 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 302 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 303 #ifdef CONFIG_PHYS_64BIT
 304 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 305 #else
 306 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 307 #endif
 308 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 309
 310 /* controller 4, Base address 203000 */
 311 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 312 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 313 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 314 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 315 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 316 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 317
 318 /* Qman/Bman */
 319 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 320 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 321 #ifdef CONFIG_PHYS_64BIT
 322 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 323 #else
 324 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 325 #endif
 326 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
 327 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 328 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 329 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 330 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 331 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 332                                          CONFIG_SYS_BMAN_CENA_SIZE)
 333 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 334 #define CONFIG_SYS_BMAN_SWP_ISDR_REG   0xE08
 335 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 336 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
 337 #ifdef CONFIG_PHYS_64BIT
 338 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
 339 #else
 340 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 341 #endif
 342 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
 343 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 344 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 345 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 346 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 347 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 348                                           CONFIG_SYS_QMAN_CENA_SIZE)
 349 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 350 #define CONFIG_SYS_QMAN_SWP_ISDR_REG   0xE08
 351
 352 #define CONFIG_SYS_DPAA_FMAN
 353 /* Default address of microcode for the Linux Fman driver */
 354 /*
 355  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 356  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 357  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 358  */
 359 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 360 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
 361
 362 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 363 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 364
 365 #ifdef CONFIG_SYS_DPAA_FMAN
 366 #define CONFIG_FMAN_ENET
 367 #endif
 368
 369 #ifdef CONFIG_PCI
 370 #define CONFIG_PCI_INDIRECT_BRIDGE
 371
 372 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 373 #endif  /* CONFIG_PCI */
 374
 375 /* SATA */
 376 #ifdef CONFIG_FSL_SATA_V2
 377 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 378 #define CONFIG_SATA1
 379 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 380 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 381 #define CONFIG_SATA2
 382 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 383 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 384
 385 #define CONFIG_LBA48
 386 #endif
 387
 388 #ifdef CONFIG_FMAN_ENET
 389 #define CONFIG_SYS_TBIPA_VALUE  8
 390 #define CONFIG_MII              /* MII PHY management */
 391 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 392 #endif
 393
 394 /*
 395  * Environment
 396  */
 397 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 398 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 399
 400 /*
 401  * USB
 402  */
 403 #define CONFIG_HAS_FSL_DR_USB
 404 #define CONFIG_HAS_FSL_MPH_USB
 405
 406 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
 407 #define CONFIG_USB_EHCI_FSL
 408 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 409 #define CONFIG_EHCI_IS_TDI
 410  /* _VIA_CONTROL_EP  */
 411 #endif
 412
 413 #ifdef CONFIG_MMC
 414 #define CONFIG_FSL_ESDHC
 415 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 416 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 417 #endif
 418
 419 /*
 420  * Miscellaneous configurable options
 421  */
 422 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 423 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 424 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 425 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 426
 427 /*
 428  * For booting Linux, the board info and command line data
 429  * have to be in the first 64 MB of memory, since this is
 430  * the maximum mapped by the Linux kernel during initialization.
 431  */
 432 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 433 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 434
 435 #ifdef CONFIG_CMD_KGDB
 436 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 437 #endif
 438
 439 /*
 440  * Environment Configuration
 441  */
 442 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 443 #define CONFIG_BOOTFILE         "uImage"
 444 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 445
 446 /* default location for tftp and bootm */
 447 #define CONFIG_LOADADDR         1000000
 448
 449 #define __USB_PHY_TYPE  utmi
 450
 451 #define CONFIG_EXTRA_ENV_SETTINGS \
 452 "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 453 "bank_intlv=cs0_cs1;"                                   \
 454 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 455 "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 456 "netdev=eth0\0"                                         \
 457 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 458 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"                     \
 459 "consoledev=ttyS0\0"                                    \
 460 "ramdiskaddr=2000000\0"                                 \
 461 "fdtaddr=1e00000\0"                                     \
 462 "bdev=sda3\0"
 463
 464 #define CONFIG_HDBOOT                                   \
 465 "setenv bootargs root=/dev/$bdev rw "           \
 466 "console=$consoledev,$baudrate $othbootargs;"   \
 467 "tftp $loadaddr $bootfile;"                     \
 468 "tftp $fdtaddr $fdtfile;"                       \
 469 "bootm $loadaddr - $fdtaddr"
 470
 471 #define CONFIG_NFSBOOTCOMMAND                   \
 472 "setenv bootargs root=/dev/nfs rw "     \
 473 "nfsroot=$serverip:$rootpath "          \
 474 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 475 "console=$consoledev,$baudrate $othbootargs;"   \
 476 "tftp $loadaddr $bootfile;"             \
 477 "tftp $fdtaddr $fdtfile;"               \
 478 "bootm $loadaddr - $fdtaddr"
 479
 480 #define CONFIG_RAMBOOTCOMMAND                           \
 481 "setenv bootargs root=/dev/ram rw "             \
 482 "console=$consoledev,$baudrate $othbootargs;"   \
 483 "tftp $ramdiskaddr $ramdiskfile;"               \
 484 "tftp $loadaddr $bootfile;"                     \
 485 "tftp $fdtaddr $fdtfile;"                       \
 486 "bootm $loadaddr $ramdiskaddr $fdtaddr"
 487
 488 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 489
 490 #include <asm/fsl_secure_boot.h>
 491
 492 #ifdef CONFIG_SECURE_BOOT
 493 #endif
 494
 495 #endif  /* __CONFIG_H */