]> git.sur5r.net Git - u-boot/blob - include/configs/imx6_spl.h
configs: Migrate CONFIG_SPL_FRAMEWORK
[u-boot] / include / configs / imx6_spl.h
1 /*
2  * Copyright (C) 2014 Gateworks Corporation
3  * Author: Tim Harvey <tharvey@gateworks.com>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7 #ifndef __IMX6_SPL_CONFIG_H
8 #define __IMX6_SPL_CONFIG_H
9
10 #ifdef CONFIG_SPL
11 /*
12  * see Figure 8-3 in IMX6DQ/IMX6SDL Reference manuals:
13  *  - IMX6SDL OCRAM (IRAM) is from 0x00907000 to 0x0091FFFF
14  *  - IMX6DQ has 2x IRAM of IMX6SDL but we intend to support IMX6SDL as well
15  *  - BOOT ROM stack is at 0x0091FFB8
16  *  - if icache/dcache is enabled (eFuse/strapping controlled) then the
17  *    IMX BOOT ROM will setup MMU table at 0x00918000, therefore we need to
18  *    fit between 0x00907000 and 0x00918000.
19  *  - Additionally the BOOT ROM loads what they consider the firmware image
20  *    which consists of a 4K header in front of us that contains the IVT, DCD
21  *    and some padding thus 'our' max size is really 0x00908000 - 0x00918000
22  *    or 64KB
23  */
24 #define CONFIG_SPL_TEXT_BASE            0x00908000
25 #define CONFIG_SPL_MAX_SIZE             0x10000
26 #define CONFIG_SPL_STACK                0x0091FFB8
27 /*
28  * Pad SPL to 68KB (4KB header + 64KB max size). This allows to write the
29  * SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a
30  * boot media (given that boot media specific offset is configured properly).
31  */
32 #define CONFIG_SPL_PAD_TO               0x11000
33
34 /* MMC support */
35 #if defined(CONFIG_SPL_MMC_SUPPORT)
36 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
37 #define CONFIG_SYS_MONITOR_LEN                  409600  /* 400 KB */
38 #endif
39
40 /* SATA support */
41 #if defined(CONFIG_SPL_SATA_SUPPORT)
42 #define CONFIG_SPL_SATA_BOOT_DEVICE             0
43 #define CONFIG_SYS_SATA_FAT_BOOT_PARTITION      1
44 #endif
45
46 /* Define the payload for FAT/EXT support */
47 #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
48 # ifdef CONFIG_OF_CONTROL
49 #  define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME       "u-boot-dtb.img"
50 # else
51 #  define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME       "u-boot.img"
52 # endif
53 #endif
54
55 #if defined(CONFIG_MX6SX) || defined(CONFIG_MX6SL) || \
56         defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
57 #define CONFIG_SPL_BSS_START_ADDR      0x88200000
58 #define CONFIG_SPL_BSS_MAX_SIZE        0x100000         /* 1 MB */
59 #define CONFIG_SYS_SPL_MALLOC_START    0x88300000
60 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000         /* 1 MB */
61 #else
62 #define CONFIG_SPL_BSS_START_ADDR       0x18200000
63 #define CONFIG_SPL_BSS_MAX_SIZE         0x100000        /* 1 MB */
64 #define CONFIG_SYS_SPL_MALLOC_START     0x18300000
65 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000        /* 1 MB */
66 #endif
67 #endif
68
69 #endif