git.sur5r.net Git - u-boot/blob - include/configs/ipek01.h

   1 /*
   2  * (C) Copyright 2006
   3  * MicroSys GmbH
   4  *
   5  * (C) Copyright 2009
   6  * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 /*
  15  * High Level Configuration Options
  16  */
  17
  18 #define CONFIG_MPC5200
  19 #define CONFIG_MPX5200          1       /* MPX5200 board */
  20 #define CONFIG_MPC5200_DDR      1       /* use DDR RAM */
  21 #define CONFIG_IPEK01                   /* Motherboard is ipek01 */
  22 #define CONFIG_DISPLAY_BOARDINFO
  23
  24 #define CONFIG_SYS_TEXT_BASE    0xfc000000
  25
  26 #define CONFIG_SYS_MPC5XXX_CLKIN        33000000 /* ... running at 33MHz */
  27
  28 #define CONFIG_MISC_INIT_R
  29
  30 #define CONFIG_SYS_CACHELINE_SIZE       32 /* For MPC5xxx CPUs */
  31 #ifdef CONFIG_CMD_KGDB
  32 #define CONFIG_SYS_CACHELINE_SHIFT      5  /* log base 2 of the above value */
  33 #endif
  34
  35 /*
  36  * Serial console configuration
  37  */
  38 #define CONFIG_PSC_CONSOLE      1       /* console is on PSC1 */
  39 #define CONFIG_BAUDRATE         115200  /* ... at 9600 bps */
  40 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
  41
  42 #define CONFIG_CMDLINE_EDITING  1       /* add command line history */
  43
  44 /*
  45  * Video configuration for LIME GDC
  46  */
  47 #define CONFIG_VIDEO
  48 #ifdef CONFIG_VIDEO
  49 #define CONFIG_VIDEO_MB862xx
  50 #define CONFIG_VIDEO_MB862xx_ACCEL
  51 #define VIDEO_FB_16BPP_WORD_SWAP
  52 #define CONFIG_CFB_CONSOLE
  53 #define CONFIG_VIDEO_LOGO
  54 #define CONFIG_VIDEO_BMP_LOGO
  55 #define CONFIG_CONSOLE_EXTRA_INFO
  56 #define CONFIG_VGA_AS_SINGLE_DEVICE
  57 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  58 #define CONFIG_VIDEO_SW_CURSOR
  59 #define CONFIG_SPLASH_SCREEN
  60 #define CONFIG_VIDEO_BMP_GZIP
  61 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE  (2 << 20)       /* decompressed img */
  62 /* Lime clock frequency */
  63 #define CONFIG_SYS_MB862xx_CCF  0x90000 /* geo 166MHz other 133MHz */
  64 /* SDRAM parameter */
  65 #define CONFIG_SYS_MB862xx_MMR  0x41c767e3
  66 #endif
  67
  68 /*
  69  * PCI Mapping:
  70  * 0x40000000 - 0x4fffffff - PCI Memory
  71  * 0x50000000 - 0x50ffffff - PCI IO Space
  72  */
  73 #define CONFIG_PCI              1
  74 #define CONFIG_PCI_PNP          1
  75 #define CONFIG_PCI_SCAN_SHOW    1
  76
  77 #define CONFIG_PCI_MEM_BUS      0x40000000
  78 #define CONFIG_PCI_MEM_PHYS     CONFIG_PCI_MEM_BUS
  79 #define CONFIG_PCI_MEM_SIZE     0x10000000
  80
  81 #define CONFIG_PCI_IO_BUS       0x50000000
  82 #define CONFIG_PCI_IO_PHYS      CONFIG_PCI_IO_BUS
  83 #define CONFIG_PCI_IO_SIZE      0x01000000
  84
  85 #define CONFIG_MII              1
  86 #define CONFIG_EEPRO100         1
  87 #define CONFIG_SYS_RX_ETH_BUFFER        8  /* use 8 rx buffer on eepro100  */
  88
  89 /* Partitions */
  90 #define CONFIG_DOS_PARTITION
  91
  92 /* USB */
  93 #define CONFIG_USB_OHCI_NEW
  94 #define CONFIG_SYS_OHCI_BE_CONTROLLER
  95
  96 #define CONFIG_SYS_USB_OHCI_CPU_INIT
  97 #define CONFIG_SYS_USB_OHCI_REGS_BASE           MPC5XXX_USB
  98 #define CONFIG_SYS_USB_OHCI_SLOT_NAME           "mpc5200"
  99 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      15
 100
 101 /*
 102  * Command line configuration.
 103  */
 104 #ifdef CONFIG_VIDEO
 105 #define CONFIG_CMD_BMP          /* BMP support */
 106 #endif
 107 #define CONFIG_CMD_DATE         /* support for RTC, date/time...*/
 108 #define CONFIG_CMD_IDE          /* IDE harddisk support */
 109 #define CONFIG_CMD_IRQ          /* irqinfo */
 110 #define CONFIG_CMD_PCI          /* pciinfo */
 111
 112 #define CONFIG_SYS_LOWBOOT      1
 113
 114 /*
 115  * Autobooting
 116  */
 117
 118 #define CONFIG_PREBOOT  "echo;" \
 119         "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
 120         "echo"
 121
 122 #undef  CONFIG_BOOTARGS
 123
 124 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 125         "netdev=eth0\0"                                                 \
 126         "consoledev=ttyPSC0\0"                                          \
 127         "hostname=ipek01\0"                                             \
 128         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 129                 "nfsroot=${serverip}:${rootpath}\0"                     \
 130         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 131         "addip=setenv bootargs ${bootargs} "                            \
 132                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 133                 ":${hostname}:${netdev}:off panic=1\0"                  \
 134         "addtty=setenv bootargs ${bootargs} "                           \
 135                 "console=${consoledev},${baudrate}\0"                   \
 136         "flash_nfs=run nfsargs addip addtty;"                           \
 137                 "bootm ${kernel_addr} - ${fdtaddr}\0"                   \
 138         "flash_self=run ramargs addip addtty;"                          \
 139                 "bootm ${kernel_addr} ${ramdisk_addr} ${fdtaddr}\0"     \
 140         "net_nfs=tftp 200000 ${bootfile}; tftp ${fdtaddr} ${fdtfile};"  \
 141                 "run nfsargs addip addtty;"                             \
 142                  "bootm ${loadaddr} - ${fdtaddr}\0"                     \
 143         "rootpath=/opt/eldk/ppc_6xx\0"                                  \
 144         "bootfile=ipek01/uImage\0"                                      \
 145         "load=tftp 100000 ipek01/u-boot.bin\0"                          \
 146         "update=protect off FC000000 +60000; era FC000000 +60000; "     \
 147                 "cp.b 100000 FC000000 ${filesize}\0"                    \
 148         "upd=run load;run update\0"                                     \
 149         "fdtaddr=800000\0"                                              \
 150         "loadaddr=400000\0"                                             \
 151         "fdtfile=ipek01/ipek01.dtb\0"                                   \
 152         ""
 153
 154 #define CONFIG_BOOTCOMMAND      "run flash_self"
 155
 156 /*
 157  * IPB Bus clocking configuration.
 158  */
 159 #define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK         /* for 133MHz */
 160 /* PCI clock must be 33, because board will not boot */
 161 #undef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2     /* for 66MHz */
 162
 163 /*
 164  * Open firmware flat tree support
 165  */
 166 #define OF_CPU                  "PowerPC,5200@0"
 167 #define OF_SOC                  "soc5200@f0000000"
 168 #define OF_TBCLK                (bd->bi_busfreq / 4)
 169
 170 /*
 171  * I2C configuration
 172  */
 173 #define CONFIG_HARD_I2C         1       /* I2C with hardware support */
 174 #define CONFIG_SYS_I2C_MODULE   2       /* Select I2C module #1 or #2 */
 175
 176 #define CONFIG_SYS_I2C_SPEED    100000  /* 100 kHz */
 177 #define CONFIG_SYS_I2C_SLAVE    0x7F
 178
 179 /*
 180  * EEPROM configuration
 181  */
 182 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x53
 183 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2
 184 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6
 185 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10
 186
 187 /*
 188  * RTC configuration
 189  */
 190 #define CONFIG_RTC_PCF8563
 191 #define CONFIG_SYS_I2C_RTC_ADDR         0x51
 192
 193 #define CONFIG_SYS_FLASH_BASE           0xFC000000
 194 #define CONFIG_SYS_FLASH_SIZE           0x01000000
 195 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_FLASH_BASE + \
 196                                          CONFIG_SYS_MONITOR_LEN)
 197
 198 #define CONFIG_SYS_MAX_FLASH_BANKS      1    /* max num of memory banks */
 199 #define CONFIG_SYS_MAX_FLASH_SECT       256  /* max num of sects on one chip */
 200 #define CONFIG_SYS_FLASH_PROTECTION  /* "Real" (hardware) sectors protection */
 201
 202 /* use CFI flash driver */
 203 #define CONFIG_FLASH_CFI_DRIVER
 204 #define CONFIG_SYS_FLASH_CFI
 205 #define CONFIG_SYS_FLASH_EMPTY_INFO
 206 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
 207
 208 /*
 209  * Environment settings
 210  */
 211 #define CONFIG_ENV_IS_IN_FLASH          1
 212 #define CONFIG_ENV_SIZE                 0x10000
 213 #define CONFIG_ENV_SECT_SIZE            0x20000
 214 #define CONFIG_ENV_OVERWRITE            1
 215 #define CONFIG_ENV_ADDR_REDUND          (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
 216 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
 217
 218 /*
 219  * Memory map
 220  */
 221 #define CONFIG_SYS_MBAR                 0xf0000000
 222 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 223 #define CONFIG_SYS_DEFAULT_MBAR         0x80000000
 224 #define CONFIG_SYS_SRAM_BASE            0xF1000000
 225 #define CONFIG_SYS_SRAM_SIZE            0x00200000
 226 #define CONFIG_SYS_LIME_BASE            0xE4000000
 227 #define CONFIG_SYS_LIME_SIZE            0x04000000
 228 #define CONFIG_SYS_FPGA_BASE            0xC0000000
 229 #define CONFIG_SYS_FPGA_SIZE            0x10000000
 230 #define CONFIG_SYS_MPEG_BASE            0xe2000000
 231 #define CONFIG_SYS_MPEG_SIZE            0x01000000
 232 #define CONFIG_SYS_CF_BASE              0xe1000000
 233 #define CONFIG_SYS_CF_SIZE              0x01000000
 234
 235 /* Use SRAM until RAM will be available */
 236 #define CONFIG_SYS_INIT_RAM_ADDR        MPC5XXX_SRAM
 237 /* End of used area in DPRAM */
 238 #define CONFIG_SYS_INIT_RAM_SIZE                MPC5XXX_SRAM_SIZE
 239
 240 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 241                                          GENERATED_GBL_DATA_SIZE)
 242 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 243
 244 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 245 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 246 #   define CONFIG_SYS_RAMBOOT           1
 247 #endif
 248
 249 #define CONFIG_SYS_MONITOR_LEN  (384 << 10)  /* Reserve 384 kB for Monitor */
 250 #define CONFIG_SYS_MALLOC_LEN   (4 << 20)    /* Reserve 128 kB for malloc() */
 251 #define CONFIG_SYS_BOOTMAPSZ    (8 << 20)    /* Initial Memory map for Linux */
 252
 253 /*
 254  * Ethernet configuration
 255  */
 256 #define CONFIG_MPC5xxx_FEC              1
 257 #define CONFIG_MPC5xxx_FEC_MII100
 258 #define CONFIG_PHY_ADDR                 0x00
 259
 260 /*
 261  * GPIO configuration
 262  */
 263 #define CONFIG_SYS_GPS_PORT_CONFIG      0x1d556624
 264
 265 /*
 266  * Miscellaneous configurable options
 267  */
 268 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 269 #ifdef CONFIG_CMD_KGDB
 270 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
 271 #else
 272 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 273 #endif
 274 /* Print Buffer Size */
 275 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 276                                          sizeof(CONFIG_SYS_PROMPT) + 16)
 277 /* max number of command args */
 278 #define CONFIG_SYS_MAXARGS              16
 279 /* Boot Argument Buffer Size */
 280 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 281
 282 #define CONFIG_SYS_MEMTEST_START        0x00100000      /* memtest works on */
 283 #define CONFIG_SYS_MEMTEST_END          0x00f00000      /* 1...15 MB in DRAM */
 284
 285 #define CONFIG_SYS_LOAD_ADDR            0x100000 /* default load address */
 286
 287 /*
 288  * Various low-level settings
 289  */
 290 #define CONFIG_SYS_HID0_INIT            HID0_ICE | HID0_ICFI
 291 #define CONFIG_SYS_HID0_FINAL           HID0_ICE
 292
 293 #define CONFIG_SYS_BOOTCS_START         CONFIG_SYS_FLASH_BASE
 294 #define CONFIG_SYS_BOOTCS_SIZE          CONFIG_SYS_FLASH_SIZE
 295 #define CONFIG_SYS_CS0_START            CONFIG_SYS_FLASH_BASE
 296 #define CONFIG_SYS_CS0_SIZE             CONFIG_SYS_FLASH_SIZE
 297 #define CONFIG_SYS_CS1_START            CONFIG_SYS_SRAM_BASE
 298 #define CONFIG_SYS_CS1_SIZE             CONFIG_SYS_SRAM_SIZE
 299 #define CONFIG_SYS_CS3_START            CONFIG_SYS_LIME_BASE
 300 #define CONFIG_SYS_CS3_SIZE             CONFIG_SYS_LIME_SIZE
 301 #define CONFIG_SYS_CS6_START            CONFIG_SYS_FPGA_BASE
 302 #define CONFIG_SYS_CS6_SIZE             CONFIG_SYS_FPGA_SIZE
 303 #define CONFIG_SYS_CS5_START            CONFIG_SYS_CF_BASE
 304 #define CONFIG_SYS_CS5_SIZE             CONFIG_SYS_CF_SIZE
 305 #define CONFIG_SYS_CS7_START            CONFIG_SYS_MPEG_BASE
 306 #define CONFIG_SYS_CS7_SIZE             CONFIG_SYS_MPEG_SIZE
 307
 308 #ifdef CONFIG_SYS_PCISPEED_66
 309 #define CONFIG_SYS_BOOTCS_CFG           0x0006F900
 310 #define CONFIG_SYS_CS1_CFG              0x0004FB00
 311 #define CONFIG_SYS_CS2_CFG              0x0006F900
 312 #else
 313 #define CONFIG_SYS_BOOTCS_CFG           0x0002F900
 314 #define CONFIG_SYS_CS1_CFG              0x0001FB00
 315 #define CONFIG_SYS_CS2_CFG              0x0002F90C
 316 #endif
 317
 318 /*
 319  * Ack active, Muxed mode, AS=24 bit address, DS=32 bit data, 0
 320  * waitstates, writeswap and readswap enabled
 321  */
 322 #define CONFIG_SYS_CS3_CFG              0x00FFFB0C
 323 #define CONFIG_SYS_CS6_CFG              0x00FFFB0C
 324 #define CONFIG_SYS_CS7_CFG              0x4040751C
 325
 326 #define CONFIG_SYS_CS_BURST             0x00000000
 327 #define CONFIG_SYS_CS_DEADCYCLE         0x33330000
 328
 329 #define CONFIG_SYS_RESET_ADDRESS        0xff000000
 330
 331 /*-----------------------------------------------------------------------
 332  * USB stuff
 333  *-----------------------------------------------------------------------
 334  */
 335 #define CONFIG_USB_CLOCK                0x0001BBBB
 336 #define CONFIG_USB_CONFIG               0x00005000
 337
 338 /*-----------------------------------------------------------------------
 339  * IDE/ATA stuff Supports IDE harddisk
 340  *-----------------------------------------------------------------------
 341  */
 342 #define CONFIG_IDE_PREINIT
 343
 344 #define CONFIG_SYS_IDE_MAXBUS           1 /* max. 1 IDE bus */
 345 #define CONFIG_SYS_IDE_MAXDEVICE        2 /* max. 2 drives per IDE bus */
 346
 347 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
 348
 349 #define CONFIG_SYS_ATA_BASE_ADDR        MPC5XXX_ATA
 350
 351 /* Offset for data I/O */
 352 #define CONFIG_SYS_ATA_DATA_OFFSET      (0x0060)
 353
 354 /* Offset for normal register accesses */
 355 #define CONFIG_SYS_ATA_REG_OFFSET       (CONFIG_SYS_ATA_DATA_OFFSET)
 356
 357 /* Offset for alternate registers */
 358 #define CONFIG_SYS_ATA_ALT_OFFSET       (0x005C)
 359
 360 /* Interval between registers */
 361 #define CONFIG_SYS_ATA_STRIDE           4
 362
 363 #endif /* __CONFIG_H */