git.sur5r.net Git - u-boot/blob - include/configs/ls1012ardb.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2016 Freescale Semiconductor, Inc.
   4  */
   5
   6 #ifndef __LS1012ARDB_H__
   7 #define __LS1012ARDB_H__
   8
   9 #include "ls1012a_common.h"
  10
  11 /* DDR */
  12 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  13 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
  14 #define CONFIG_NR_DRAM_BANKS            2
  15 #define CONFIG_SYS_SDRAM_SIZE           0x40000000
  16 #define CONFIG_CMD_MEMINFO
  17 #define CONFIG_SYS_MEMTEST_START        0x80000000
  18 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
  19
  20
  21 /*
  22  * I2C IO expander
  23  */
  24
  25 #define I2C_MUX_IO_ADDR         0x24
  26 #define I2C_MUX_IO2_ADDR        0x25
  27 #define I2C_MUX_IO_0            0
  28 #define I2C_MUX_IO_1            1
  29 #define SW_BOOT_MASK            0x03
  30 #define SW_BOOT_EMU             0x02
  31 #define SW_BOOT_BANK1           0x00
  32 #define SW_BOOT_BANK2           0x01
  33 #define SW_REV_MASK             0xF8
  34 #define SW_REV_A                0xF8
  35 #define SW_REV_B                0xF0
  36 #define SW_REV_C                0xE8
  37 #define SW_REV_C1               0xE0
  38 #define SW_REV_C2               0xD8
  39 #define SW_REV_D                0xD0
  40 #define SW_REV_E                0xC8
  41 #define __PHY_MASK              0xF9
  42 #define __PHY_ETH2_MASK         0xFB
  43 #define __PHY_ETH1_MASK         0xFD
  44
  45 /*  MMC  */
  46 #ifdef CONFIG_MMC
  47 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
  48 #endif
  49
  50
  51 #define CONFIG_PCIE1            /* PCIE controller 1 */
  52
  53 #define CONFIG_PCI_SCAN_SHOW
  54
  55 #define CONFIG_CMD_MEMINFO
  56 #define CONFIG_SYS_MEMTEST_START        0x80000000
  57 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
  58
  59 #undef CONFIG_EXTRA_ENV_SETTINGS
  60 #define CONFIG_EXTRA_ENV_SETTINGS               \
  61         "verify=no\0"                           \
  62         "fdt_high=0xffffffffffffffff\0"         \
  63         "initrd_high=0xffffffffffffffff\0"      \
  64         "fdt_addr=0x00f00000\0"                 \
  65         "kernel_addr=0x01000000\0"              \
  66         "kernelheader_addr=0x800000\0"          \
  67         "scriptaddr=0x80000000\0"               \
  68         "scripthdraddr=0x80080000\0"            \
  69         "fdtheader_addr_r=0x80100000\0"         \
  70         "kernelheader_addr_r=0x80200000\0"      \
  71         "kernel_addr_r=0x81000000\0"            \
  72         "fdt_addr_r=0x90000000\0"               \
  73         "load_addr=0xa0000000\0"                \
  74         "kernel_size=0x2800000\0"               \
  75         "kernelheader_size=0x40000\0"           \
  76         "console=ttyS0,115200\0"                \
  77         BOOTENV                                 \
  78         "boot_scripts=ls1012ardb_boot.scr\0"    \
  79         "boot_script_hdr=hdr_ls1012ardb_bs.out\0"       \
  80         "scan_dev_for_boot_part="               \
  81              "part list ${devtype} ${devnum} devplist; "        \
  82              "env exists devplist || setenv devplist 1; "       \
  83              "for distro_bootpart in ${devplist}; do "          \
  84                   "if fstype ${devtype} "                       \
  85                       "${devnum}:${distro_bootpart} "           \
  86                       "bootfstype; then "                       \
  87                       "run scan_dev_for_boot; " \
  88                   "fi; "                        \
  89               "done\0"                          \
  90         "scan_dev_for_boot="                              \
  91                 "echo Scanning ${devtype} "               \
  92                                 "${devnum}:${distro_bootpart}...; "  \
  93                 "for prefix in ${boot_prefixes}; do "     \
  94                         "run scan_dev_for_scripts; "      \
  95                 "done;"                                   \
  96                 "\0"                                      \
  97         "boot_a_script="                                  \
  98                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
  99                         "${scriptaddr} ${prefix}${script}; "    \
 100                 "env exists secureboot && load ${devtype} "     \
 101                         "${devnum}:${distro_bootpart} "         \
 102                         "${scripthdraddr} ${prefix}${boot_script_hdr} " \
 103                         "&& esbc_validate ${scripthdraddr};"    \
 104                 "source ${scriptaddr}\0"          \
 105         "installer=load mmc 0:2 $load_addr "    \
 106                    "/flex_installer_arm64.itb; "        \
 107                    "bootm $load_addr#$board\0"  \
 108         "qspi_bootcmd=echo Trying load from qspi..;"    \
 109                 "sf probe && sf read $load_addr "       \
 110                 "$kernel_addr $kernel_size; env exists secureboot "     \
 111                 "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
 112                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 113                 "bootm $load_addr#$board\0"
 114
 115 #undef CONFIG_BOOTCOMMAND
 116 #define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\
 117                            "env exists secureboot && esbc_halt;"
 118
 119 #include <asm/fsl_secure_boot.h>
 120
 121 #endif /* __LS1012ARDB_H__ */