git.sur5r.net Git - u-boot/blob - include/configs/mx6sabre_common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   4  *
   5  * Configuration settings for the Freescale i.MX6Q SabreSD board.
   6  */
   7
   8 #ifndef __MX6QSABRE_COMMON_CONFIG_H
   9 #define __MX6QSABRE_COMMON_CONFIG_H
  10
  11 #include "mx6_common.h"
  12
  13 #define CONFIG_IMX_THERMAL
  14
  15 /* Size of malloc() pool */
  16 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  17
  18 #define CONFIG_MXC_UART
  19
  20 /* MMC Configs */
  21 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  22
  23 #define CONFIG_FEC_MXC
  24 #define CONFIG_MII
  25 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  26 #define CONFIG_FEC_XCV_TYPE             RGMII
  27 #define CONFIG_ETHPRIME                 "FEC"
  28 #define CONFIG_FEC_MXC_PHYADDR          1
  29
  30 #define CONFIG_PHY_ATHEROS
  31
  32 #ifdef CONFIG_CMD_SF
  33 #define CONFIG_SF_DEFAULT_BUS           0
  34 #define CONFIG_SF_DEFAULT_CS            0
  35 #define CONFIG_SF_DEFAULT_SPEED         20000000
  36 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  37 #endif
  38
  39 #ifdef CONFIG_SUPPORT_EMMC_BOOT
  40 #define EMMC_ENV \
  41         "emmcdev=2\0" \
  42         "update_emmc_firmware=" \
  43                 "if test ${ip_dyn} = yes; then " \
  44                         "setenv get_cmd dhcp; " \
  45                 "else " \
  46                         "setenv get_cmd tftp; " \
  47                 "fi; " \
  48                 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
  49                         "if mmc dev ${emmcdev} 1; then "        \
  50                                 "setexpr fw_sz ${filesize} / 0x200; " \
  51                                 "setexpr fw_sz ${fw_sz} + 1; "  \
  52                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
  53                         "fi; "  \
  54                 "fi\0"
  55 #else
  56 #define EMMC_ENV ""
  57 #endif
  58
  59 #define CONFIG_EXTRA_ENV_SETTINGS \
  60         "script=boot.scr\0" \
  61         "image=zImage\0" \
  62         "fdt_file=undefined\0" \
  63         "fdt_addr=0x18000000\0" \
  64         "boot_fdt=try\0" \
  65         "ip_dyn=yes\0" \
  66         "console=" CONSOLE_DEV "\0" \
  67         "dfuspi=dfu 0 sf 0:0:10000000:0\0" \
  68         "dfu_alt_info_spl=spl raw 0x400\0" \
  69         "dfu_alt_info_img=u-boot raw 0x10000\0" \
  70         "dfu_alt_info=spl raw 0x400\0" \
  71         "fdt_high=0xffffffff\0"   \
  72         "initrd_high=0xffffffff\0" \
  73         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
  74         "mmcpart=1\0" \
  75         "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
  76         "update_sd_firmware=" \
  77                 "if test ${ip_dyn} = yes; then " \
  78                         "setenv get_cmd dhcp; " \
  79                 "else " \
  80                         "setenv get_cmd tftp; " \
  81                 "fi; " \
  82                 "if mmc dev ${mmcdev}; then "   \
  83                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
  84                                 "setexpr fw_sz ${filesize} / 0x200; " \
  85                                 "setexpr fw_sz ${fw_sz} + 1; "  \
  86                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
  87                         "fi; "  \
  88                 "fi\0" \
  89         EMMC_ENV          \
  90         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  91                 "root=PARTUUID=${uuid} rootwait rw\0" \
  92         "loadbootscript=" \
  93                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  94         "bootscript=echo Running bootscript from mmc ...; " \
  95                 "source\0" \
  96         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  97         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  98         "mmcboot=echo Booting from mmc ...; " \
  99                 "run finduuid; " \
 100                 "run mmcargs; " \
 101                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 102                         "if run loadfdt; then " \
 103                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 104                         "else " \
 105                                 "if test ${boot_fdt} = try; then " \
 106                                         "bootz; " \
 107                                 "else " \
 108                                         "echo WARN: Cannot load the DT; " \
 109                                 "fi; " \
 110                         "fi; " \
 111                 "else " \
 112                         "bootz; " \
 113                 "fi;\0" \
 114         "netargs=setenv bootargs console=${console},${baudrate} " \
 115                 "root=/dev/nfs " \
 116                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 117         "netboot=echo Booting from net ...; " \
 118                 "run netargs; " \
 119                 "if test ${ip_dyn} = yes; then " \
 120                         "setenv get_cmd dhcp; " \
 121                 "else " \
 122                         "setenv get_cmd tftp; " \
 123                 "fi; " \
 124                 "${get_cmd} ${image}; " \
 125                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 126                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 127                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 128                         "else " \
 129                                 "if test ${boot_fdt} = try; then " \
 130                                         "bootz; " \
 131                                 "else " \
 132                                         "echo WARN: Cannot load the DT; " \
 133                                 "fi; " \
 134                         "fi; " \
 135                 "else " \
 136                         "bootz; " \
 137                 "fi;\0" \
 138                 "findfdt="\
 139                         "if test $fdt_file = undefined; then " \
 140                                 "if test $board_name = SABREAUTO && test $board_rev = MX6QP; then " \
 141                                         "setenv fdt_file imx6qp-sabreauto.dtb; fi; " \
 142                                 "if test $board_name = SABREAUTO && test $board_rev = MX6Q; then " \
 143                                         "setenv fdt_file imx6q-sabreauto.dtb; fi; " \
 144                                 "if test $board_name = SABREAUTO && test $board_rev = MX6DL; then " \
 145                                         "setenv fdt_file imx6dl-sabreauto.dtb; fi; " \
 146                                 "if test $board_name = SABRESD && test $board_rev = MX6QP; then " \
 147                                         "setenv fdt_file imx6qp-sabresd.dtb; fi; " \
 148                                 "if test $board_name = SABRESD && test $board_rev = MX6Q; then " \
 149                                         "setenv fdt_file imx6q-sabresd.dtb; fi; " \
 150                                 "if test $board_name = SABRESD && test $board_rev = MX6DL; then " \
 151                                         "setenv fdt_file imx6dl-sabresd.dtb; fi; " \
 152                                 "if test $fdt_file = undefined; then " \
 153                                         "echo WARNING: Could not determine dtb to use; fi; " \
 154                         "fi;\0" \
 155
 156 #define CONFIG_BOOTCOMMAND \
 157         "run findfdt;" \
 158         "mmc dev ${mmcdev};" \
 159         "if mmc rescan; then " \
 160                 "if run loadbootscript; then " \
 161                 "run bootscript; " \
 162                 "else " \
 163                         "if run loadimage; then " \
 164                                 "run mmcboot; " \
 165                         "else run netboot; " \
 166                         "fi; " \
 167                 "fi; " \
 168         "else run netboot; fi"
 169
 170 #define CONFIG_ARP_TIMEOUT     200UL
 171
 172 #define CONFIG_SYS_MEMTEST_START       0x10000000
 173 #define CONFIG_SYS_MEMTEST_END         0x10010000
 174 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 175
 176 /* Physical Memory Map */
 177 #define CONFIG_NR_DRAM_BANKS           1
 178 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 179
 180 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 181 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 182 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 183
 184 #define CONFIG_SYS_INIT_SP_OFFSET \
 185         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 186 #define CONFIG_SYS_INIT_SP_ADDR \
 187         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 188
 189 /* Environment organization */
 190 #define CONFIG_ENV_SIZE                 (8 * 1024)
 191
 192 #if defined(CONFIG_ENV_IS_IN_MMC)
 193 #define CONFIG_ENV_OFFSET               (768 * 1024)
 194 #endif
 195
 196 /* Framebuffer */
 197 #define CONFIG_VIDEO_IPUV3
 198 #define CONFIG_VIDEO_BMP_RLE8
 199 #define CONFIG_SPLASH_SCREEN
 200 #define CONFIG_SPLASH_SCREEN_ALIGN
 201 #define CONFIG_BMP_16BPP
 202 #define CONFIG_VIDEO_LOGO
 203 #define CONFIG_VIDEO_BMP_LOGO
 204 #define CONFIG_IMX_HDMI
 205 #define CONFIG_IMX_VIDEO_SKIP
 206
 207 #define CONFIG_USBD_HS
 208
 209 #endif                         /* __MX6QSABRE_COMMON_CONFIG_H */