git.sur5r.net Git - u-boot/blob - include/configs/socfpga_common.h

   1 /*
   2  * Copyright (C) 2012 Altera Corporation <www.altera.com>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6 #ifndef __CONFIG_SOCFPGA_COMMON_H__
   7 #define __CONFIG_SOCFPGA_COMMON_H__
   8
   9 /* Virtual target or real hardware */
  10 #undef CONFIG_SOCFPGA_VIRTUAL_TARGET
  11
  12 /*
  13  * High level configuration
  14  */
  15 #define CONFIG_DISPLAY_BOARDINFO_LATE
  16 #define CONFIG_CLOCKS
  17
  18 #define CONFIG_SYS_BOOTMAPSZ            (64 * 1024 * 1024)
  19
  20 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  21
  22 /* add target to build it automatically upon "make" */
  23 #define CONFIG_BUILD_TARGET             "u-boot-with-spl.sfp"
  24
  25 /*
  26  * Memory configurations
  27  */
  28 #define CONFIG_NR_DRAM_BANKS            1
  29 #define PHYS_SDRAM_1                    0x0
  30 #define CONFIG_SYS_MALLOC_LEN           (64 * 1024 * 1024)
  31 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM_1
  32 #define CONFIG_SYS_MEMTEST_END          PHYS_SDRAM_1_SIZE
  33 #if defined(CONFIG_TARGET_SOCFPGA_GEN5)
  34 #define CONFIG_SYS_INIT_RAM_ADDR        0xFFFF0000
  35 #define CONFIG_SYS_INIT_RAM_SIZE        0x10000
  36 #elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
  37 #define CONFIG_SYS_INIT_RAM_ADDR        0xFFE00000
  38 #define CONFIG_SYS_INIT_RAM_SIZE        0x40000 /* 256KB */
  39 #endif
  40 #define CONFIG_SYS_INIT_SP_OFFSET               \
  41         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  42 #define CONFIG_SYS_INIT_SP_ADDR                 \
  43         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  44
  45 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  46
  47 /*
  48  * U-Boot general configurations
  49  */
  50 #define CONFIG_SYS_LONGHELP
  51 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O buffer size */
  52                                                 /* Print buffer size */
  53 #define CONFIG_SYS_MAXARGS      32              /* Max number of command args */
  54 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
  55                                                 /* Boot argument buffer size */
  56 #define CONFIG_AUTO_COMPLETE                    /* Command auto complete */
  57 #define CONFIG_CMDLINE_EDITING                  /* Command history etc */
  58
  59 #ifndef CONFIG_SYS_HOSTNAME
  60 #define CONFIG_SYS_HOSTNAME     CONFIG_SYS_BOARD
  61 #endif
  62
  63 /*
  64  * Cache
  65  */
  66 #define CONFIG_SYS_L2_PL310
  67 #define CONFIG_SYS_PL310_BASE           SOCFPGA_MPUL2_ADDRESS
  68
  69 /*
  70  * EPCS/EPCQx1 Serial Flash Controller
  71  */
  72 #ifdef CONFIG_ALTERA_SPI
  73 #define CONFIG_SF_DEFAULT_SPEED         30000000
  74 /*
  75  * The base address is configurable in QSys, each board must specify the
  76  * base address based on it's particular FPGA configuration. Please note
  77  * that the address here is incremented by  0x400  from the Base address
  78  * selected in QSys, since the SPI registers are at offset +0x400.
  79  * #define CONFIG_SYS_SPI_BASE          0xff240400
  80  */
  81 #endif
  82
  83 /*
  84  * Ethernet on SoC (EMAC)
  85  */
  86 #if defined(CONFIG_CMD_NET) && !defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
  87 #define CONFIG_DW_ALTDESCRIPTOR
  88 #define CONFIG_MII
  89 #endif
  90
  91 /*
  92  * FPGA Driver
  93  */
  94 #ifdef CONFIG_CMD_FPGA
  95 #define CONFIG_FPGA_COUNT               1
  96 #endif
  97
  98 /*
  99  * L4 OSC1 Timer 0
 100  */
 101 /* This timer uses eosc1, whose clock frequency is fixed at any condition. */
 102 #define CONFIG_SYS_TIMERBASE            SOCFPGA_OSC1TIMER0_ADDRESS
 103 #define CONFIG_SYS_TIMER_COUNTS_DOWN
 104 #define CONFIG_SYS_TIMER_COUNTER        (CONFIG_SYS_TIMERBASE + 0x4)
 105 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
 106 #define CONFIG_SYS_TIMER_RATE           2400000
 107 #else
 108 #define CONFIG_SYS_TIMER_RATE           25000000
 109 #endif
 110
 111 /*
 112  * L4 Watchdog
 113  */
 114 #ifdef CONFIG_HW_WATCHDOG
 115 #define CONFIG_DESIGNWARE_WATCHDOG
 116 #define CONFIG_DW_WDT_BASE              SOCFPGA_L4WD0_ADDRESS
 117 #define CONFIG_DW_WDT_CLOCK_KHZ         25000
 118 #define CONFIG_WATCHDOG_TIMEOUT_MSECS   30000
 119 #endif
 120
 121 /*
 122  * MMC Driver
 123  */
 124 #ifdef CONFIG_CMD_MMC
 125 #define CONFIG_BOUNCE_BUFFER
 126 /* FIXME */
 127 /* using smaller max blk cnt to avoid flooding the limited stack we have */
 128 #define CONFIG_SYS_MMC_MAX_BLK_COUNT    256     /* FIXME -- SPL only? */
 129 #endif
 130
 131 /*
 132  * NAND Support
 133  */
 134 #ifdef CONFIG_NAND_DENALI
 135 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 136 #define CONFIG_SYS_NAND_ONFI_DETECTION
 137 #define CONFIG_SYS_NAND_REGS_BASE       SOCFPGA_NANDREGS_ADDRESS
 138 #define CONFIG_SYS_NAND_DATA_BASE       SOCFPGA_NANDDATA_ADDRESS
 139 #endif
 140
 141 /*
 142  * I2C support
 143  */
 144 #define CONFIG_SYS_I2C
 145 #define CONFIG_SYS_I2C_BASE             SOCFPGA_I2C0_ADDRESS
 146 #define CONFIG_SYS_I2C_BASE1            SOCFPGA_I2C1_ADDRESS
 147 #define CONFIG_SYS_I2C_BASE2            SOCFPGA_I2C2_ADDRESS
 148 #define CONFIG_SYS_I2C_BASE3            SOCFPGA_I2C3_ADDRESS
 149 /* Using standard mode which the speed up to 100Kb/s */
 150 #define CONFIG_SYS_I2C_SPEED            100000
 151 #define CONFIG_SYS_I2C_SPEED1           100000
 152 #define CONFIG_SYS_I2C_SPEED2           100000
 153 #define CONFIG_SYS_I2C_SPEED3           100000
 154 /* Address of device when used as slave */
 155 #define CONFIG_SYS_I2C_SLAVE            0x02
 156 #define CONFIG_SYS_I2C_SLAVE1           0x02
 157 #define CONFIG_SYS_I2C_SLAVE2           0x02
 158 #define CONFIG_SYS_I2C_SLAVE3           0x02
 159 #ifndef __ASSEMBLY__
 160 /* Clock supplied to I2C controller in unit of MHz */
 161 unsigned int cm_get_l4_sp_clk_hz(void);
 162 #define IC_CLK                          (cm_get_l4_sp_clk_hz() / 1000000)
 163 #endif
 164
 165 /*
 166  * QSPI support
 167  */
 168 /* Enable multiple SPI NOR flash manufacturers */
 169 #ifndef CONFIG_SPL_BUILD
 170 #define CONFIG_SPI_FLASH_MTD
 171 #define CONFIG_MTD_DEVICE
 172 #define CONFIG_MTD_PARTITIONS
 173 #endif
 174 /* QSPI reference clock */
 175 #ifndef __ASSEMBLY__
 176 unsigned int cm_get_qspi_controller_clk_hz(void);
 177 #define CONFIG_CQSPI_REF_CLK            cm_get_qspi_controller_clk_hz()
 178 #endif
 179
 180 /*
 181  * Designware SPI support
 182  */
 183
 184 /*
 185  * Serial Driver
 186  */
 187 #define CONFIG_SYS_NS16550_SERIAL
 188 #define CONFIG_SYS_NS16550_REG_SIZE     -4
 189 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
 190 #define CONFIG_SYS_NS16550_CLK          1000000
 191 #elif defined(CONFIG_TARGET_SOCFPGA_GEN5)
 192 #define CONFIG_SYS_NS16550_COM1         SOCFPGA_UART0_ADDRESS
 193 #define CONFIG_SYS_NS16550_CLK          100000000
 194 #elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
 195 #define CONFIG_SYS_NS16550_COM1        SOCFPGA_UART1_ADDRESS
 196 #define CONFIG_SYS_NS16550_CLK          50000000
 197 #endif
 198 #define CONFIG_CONS_INDEX               1
 199
 200 /*
 201  * USB
 202  */
 203
 204 /*
 205  * USB Gadget (DFU, UMS)
 206  */
 207 #if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE)
 208 #define CONFIG_SYS_DFU_DATA_BUF_SIZE    (16 * 1024 * 1024)
 209 #define DFU_DEFAULT_POLL_TIMEOUT        300
 210
 211 /* USB IDs */
 212 #define CONFIG_G_DNL_UMS_VENDOR_NUM     0x0525
 213 #define CONFIG_G_DNL_UMS_PRODUCT_NUM    0xA4A5
 214 #endif
 215
 216 /*
 217  * U-Boot environment
 218  */
 219 #if !defined(CONFIG_ENV_SIZE)
 220 #define CONFIG_ENV_SIZE                 (8 * 1024)
 221 #endif
 222
 223 /* Environment for SDMMC boot */
 224 #if defined(CONFIG_ENV_IS_IN_MMC) && !defined(CONFIG_ENV_OFFSET)
 225 #define CONFIG_SYS_MMC_ENV_DEV          0 /* device 0 */
 226 #define CONFIG_ENV_OFFSET               (34 * 512) /* just after the GPT */
 227 #endif
 228
 229 /* Environment for QSPI boot */
 230 #if defined(CONFIG_ENV_IS_IN_SPI_FLASH) && !defined(CONFIG_ENV_OFFSET)
 231 #define CONFIG_ENV_OFFSET               0x00100000
 232 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
 233 #endif
 234
 235 /*
 236  * mtd partitioning for serial NOR flash
 237  *
 238  * device nor0 <ff705000.spi.0>, # parts = 6
 239  * #: name                size            offset          mask_flags
 240  * 0: u-boot              0x00100000      0x00000000      0
 241  * 1: env1                0x00040000      0x00100000      0
 242  * 2: env2                0x00040000      0x00140000      0
 243  * 3: UBI                 0x03e80000      0x00180000      0
 244  * 4: boot                0x00e80000      0x00180000      0
 245  * 5: rootfs              0x01000000      0x01000000      0
 246  *
 247  */
 248
 249 /*
 250  * SPL
 251  *
 252  * SRAM Memory layout:
 253  *
 254  * 0xFFFF_0000 ...... Start of SRAM
 255  * 0xFFFF_xxxx ...... Top of stack (grows down)
 256  * 0xFFFF_yyyy ...... Malloc area
 257  * 0xFFFF_zzzz ...... Global Data
 258  * 0xFFFF_FF00 ...... End of SRAM
 259  */
 260 #define CONFIG_SPL_TEXT_BASE            CONFIG_SYS_INIT_RAM_ADDR
 261 #define CONFIG_SPL_MAX_SIZE             CONFIG_SYS_INIT_RAM_SIZE
 262
 263 /* SPL SDMMC boot support */
 264 #ifdef CONFIG_SPL_MMC_SUPPORT
 265 #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
 266 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME         "u-boot-dtb.img"
 267 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 268 #endif
 269 #else
 270 #ifndef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
 271 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION      1
 272 #endif
 273 #endif
 274
 275 /* SPL QSPI boot support */
 276 #ifdef CONFIG_SPL_SPI_SUPPORT
 277 #define CONFIG_SPL_SPI_LOAD
 278 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x40000
 279 #endif
 280
 281 /* SPL NAND boot support */
 282 #ifdef CONFIG_SPL_NAND_SUPPORT
 283 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 284 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x40000
 285 #endif
 286
 287 /*
 288  * Stack setup
 289  */
 290 #define CONFIG_SPL_STACK                CONFIG_SYS_INIT_SP_ADDR
 291
 292 /* Extra Environment */
 293 #ifndef CONFIG_SPL_BUILD
 294 #include <config_distro_defaults.h>
 295
 296 #ifdef CONFIG_CMD_DHCP
 297 #define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na)
 298 #else
 299 #define BOOT_TARGET_DEVICES_DHCP(func)
 300 #endif
 301
 302 #ifdef CONFIG_CMD_PXE
 303 #define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
 304 #else
 305 #define BOOT_TARGET_DEVICES_PXE(func)
 306 #endif
 307
 308 #ifdef CONFIG_CMD_MMC
 309 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
 310 #else
 311 #define BOOT_TARGET_DEVICES_MMC(func)
 312 #endif
 313
 314 #define BOOT_TARGET_DEVICES(func) \
 315         BOOT_TARGET_DEVICES_MMC(func) \
 316         BOOT_TARGET_DEVICES_PXE(func) \
 317         BOOT_TARGET_DEVICES_DHCP(func)
 318
 319 #include <config_distro_bootcmd.h>
 320
 321 #ifndef CONFIG_EXTRA_ENV_SETTINGS
 322 #define CONFIG_EXTRA_ENV_SETTINGS \
 323         "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
 324         "bootm_size=0xa000000\0" \
 325         "kernel_addr_r="__stringify(CONFIG_SYS_LOAD_ADDR)"\0" \
 326         "fdt_addr_r=0x02000000\0" \
 327         "scriptaddr=0x02100000\0" \
 328         "pxefile_addr_r=0x02200000\0" \
 329         "ramdisk_addr_r=0x02300000\0" \
 330         BOOTENV
 331
 332 #endif
 333 #endif
 334
 335 #endif  /* __CONFIG_SOCFPGA_COMMON_H__ */