git.sur5r.net Git - u-boot/blob - include/configs/socfpga_common.h

   1 /*
   2  * Copyright (C) 2012 Altera Corporation <www.altera.com>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6 #ifndef __CONFIG_SOCFPGA_COMMON_H__
   7 #define __CONFIG_SOCFPGA_COMMON_H__
   8
   9 /* Virtual target or real hardware */
  10 #undef CONFIG_SOCFPGA_VIRTUAL_TARGET
  11
  12 /*
  13  * High level configuration
  14  */
  15 #define CONFIG_DISPLAY_BOARDINFO_LATE
  16 #define CONFIG_CLOCKS
  17
  18 #define CONFIG_SYS_BOOTMAPSZ            (64 * 1024 * 1024)
  19
  20 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  21
  22 /* add target to build it automatically upon "make" */
  23 #define CONFIG_BUILD_TARGET             "u-boot-with-spl.sfp"
  24
  25 /*
  26  * Memory configurations
  27  */
  28 #define CONFIG_NR_DRAM_BANKS            1
  29 #define PHYS_SDRAM_1                    0x0
  30 #define CONFIG_SYS_MALLOC_LEN           (64 * 1024 * 1024)
  31 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM_1
  32 #define CONFIG_SYS_MEMTEST_END          PHYS_SDRAM_1_SIZE
  33 #if defined(CONFIG_TARGET_SOCFPGA_GEN5)
  34 #define CONFIG_SYS_INIT_RAM_ADDR        0xFFFF0000
  35 #define CONFIG_SYS_INIT_RAM_SIZE        0x10000
  36 #elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
  37 #define CONFIG_SYS_INIT_RAM_ADDR        0xFFE00000
  38 #define CONFIG_SYS_INIT_RAM_SIZE        0x40000 /* 256KB */
  39 #endif
  40 #define CONFIG_SYS_INIT_SP_OFFSET               \
  41         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  42 #define CONFIG_SYS_INIT_SP_ADDR                 \
  43         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  44
  45 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  46 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
  47 #define CONFIG_SYS_TEXT_BASE            0x08000040
  48 #else
  49 #define CONFIG_SYS_TEXT_BASE            0x01000040
  50 #endif
  51
  52 /*
  53  * U-Boot general configurations
  54  */
  55 #define CONFIG_SYS_LONGHELP
  56 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O buffer size */
  57 #define CONFIG_SYS_PBSIZE       \
  58         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
  59                                                 /* Print buffer size */
  60 #define CONFIG_SYS_MAXARGS      32              /* Max number of command args */
  61 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
  62                                                 /* Boot argument buffer size */
  63 #define CONFIG_AUTO_COMPLETE                    /* Command auto complete */
  64 #define CONFIG_CMDLINE_EDITING                  /* Command history etc */
  65
  66 #ifndef CONFIG_SYS_HOSTNAME
  67 #define CONFIG_SYS_HOSTNAME     CONFIG_SYS_BOARD
  68 #endif
  69
  70 #define CONFIG_CMD_PXE
  71 #define CONFIG_MENU
  72
  73 /*
  74  * Cache
  75  */
  76 #define CONFIG_SYS_L2_PL310
  77 #define CONFIG_SYS_PL310_BASE           SOCFPGA_MPUL2_ADDRESS
  78
  79 /*
  80  * EPCS/EPCQx1 Serial Flash Controller
  81  */
  82 #ifdef CONFIG_ALTERA_SPI
  83 #define CONFIG_SF_DEFAULT_SPEED         30000000
  84 /*
  85  * The base address is configurable in QSys, each board must specify the
  86  * base address based on it's particular FPGA configuration. Please note
  87  * that the address here is incremented by  0x400  from the Base address
  88  * selected in QSys, since the SPI registers are at offset +0x400.
  89  * #define CONFIG_SYS_SPI_BASE          0xff240400
  90  */
  91 #endif
  92
  93 /*
  94  * Ethernet on SoC (EMAC)
  95  */
  96 #if defined(CONFIG_CMD_NET) && !defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
  97 #define CONFIG_DW_ALTDESCRIPTOR
  98 #define CONFIG_MII
  99 #define CONFIG_AUTONEG_TIMEOUT          (15 * CONFIG_SYS_HZ)
 100 #define CONFIG_PHY_GIGE
 101 #endif
 102
 103 /*
 104  * FPGA Driver
 105  */
 106 #ifdef CONFIG_TARGET_SOCFPGA_GEN5
 107 #ifdef CONFIG_CMD_FPGA
 108 #define CONFIG_FPGA_COUNT               1
 109 #endif
 110 #endif
 111 /*
 112  * L4 OSC1 Timer 0
 113  */
 114 /* This timer uses eosc1, whose clock frequency is fixed at any condition. */
 115 #define CONFIG_SYS_TIMERBASE            SOCFPGA_OSC1TIMER0_ADDRESS
 116 #define CONFIG_SYS_TIMER_COUNTS_DOWN
 117 #define CONFIG_SYS_TIMER_COUNTER        (CONFIG_SYS_TIMERBASE + 0x4)
 118 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
 119 #define CONFIG_SYS_TIMER_RATE           2400000
 120 #else
 121 #define CONFIG_SYS_TIMER_RATE           25000000
 122 #endif
 123
 124 /*
 125  * L4 Watchdog
 126  */
 127 #ifdef CONFIG_HW_WATCHDOG
 128 #define CONFIG_DESIGNWARE_WATCHDOG
 129 #define CONFIG_DW_WDT_BASE              SOCFPGA_L4WD0_ADDRESS
 130 #define CONFIG_DW_WDT_CLOCK_KHZ         25000
 131 #define CONFIG_WATCHDOG_TIMEOUT_MSECS   30000
 132 #endif
 133
 134 /*
 135  * MMC Driver
 136  */
 137 #ifdef CONFIG_CMD_MMC
 138 #define CONFIG_BOUNCE_BUFFER
 139 /* FIXME */
 140 /* using smaller max blk cnt to avoid flooding the limited stack we have */
 141 #define CONFIG_SYS_MMC_MAX_BLK_COUNT    256     /* FIXME -- SPL only? */
 142 #endif
 143
 144 /*
 145  * NAND Support
 146  */
 147 #ifdef CONFIG_NAND_DENALI
 148 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 149 #define CONFIG_SYS_NAND_MAX_CHIPS       1
 150 #define CONFIG_SYS_NAND_ONFI_DETECTION
 151 #define CONFIG_NAND_DENALI_ECC_SIZE     512
 152 #define CONFIG_SYS_NAND_REGS_BASE       SOCFPGA_NANDREGS_ADDRESS
 153 #define CONFIG_SYS_NAND_DATA_BASE       SOCFPGA_NANDDATA_ADDRESS
 154 #define CONFIG_SYS_NAND_BASE            (CONFIG_SYS_NAND_DATA_BASE + 0x10)
 155 #endif
 156
 157 /*
 158  * I2C support
 159  */
 160 #define CONFIG_SYS_I2C
 161 #define CONFIG_SYS_I2C_BUS_MAX          4
 162 #define CONFIG_SYS_I2C_BASE             SOCFPGA_I2C0_ADDRESS
 163 #define CONFIG_SYS_I2C_BASE1            SOCFPGA_I2C1_ADDRESS
 164 #define CONFIG_SYS_I2C_BASE2            SOCFPGA_I2C2_ADDRESS
 165 #define CONFIG_SYS_I2C_BASE3            SOCFPGA_I2C3_ADDRESS
 166 /* Using standard mode which the speed up to 100Kb/s */
 167 #define CONFIG_SYS_I2C_SPEED            100000
 168 #define CONFIG_SYS_I2C_SPEED1           100000
 169 #define CONFIG_SYS_I2C_SPEED2           100000
 170 #define CONFIG_SYS_I2C_SPEED3           100000
 171 /* Address of device when used as slave */
 172 #define CONFIG_SYS_I2C_SLAVE            0x02
 173 #define CONFIG_SYS_I2C_SLAVE1           0x02
 174 #define CONFIG_SYS_I2C_SLAVE2           0x02
 175 #define CONFIG_SYS_I2C_SLAVE3           0x02
 176 #ifndef __ASSEMBLY__
 177 /* Clock supplied to I2C controller in unit of MHz */
 178 unsigned int cm_get_l4_sp_clk_hz(void);
 179 #define IC_CLK                          (cm_get_l4_sp_clk_hz() / 1000000)
 180 #endif
 181
 182 /*
 183  * QSPI support
 184  */
 185 /* Enable multiple SPI NOR flash manufacturers */
 186 #ifndef CONFIG_SPL_BUILD
 187 #define CONFIG_SPI_FLASH_MTD
 188 #define CONFIG_MTD_DEVICE
 189 #define CONFIG_MTD_PARTITIONS
 190 #define MTDIDS_DEFAULT                  "nor0=ff705000.spi.0"
 191 #endif
 192 /* QSPI reference clock */
 193 #ifndef __ASSEMBLY__
 194 unsigned int cm_get_qspi_controller_clk_hz(void);
 195 #define CONFIG_CQSPI_REF_CLK            cm_get_qspi_controller_clk_hz()
 196 #endif
 197 #define CONFIG_CQSPI_DECODER            0
 198 #define CONFIG_BOUNCE_BUFFER
 199
 200 /*
 201  * Designware SPI support
 202  */
 203
 204 /*
 205  * Serial Driver
 206  */
 207 #define CONFIG_SYS_NS16550_SERIAL
 208 #define CONFIG_SYS_NS16550_REG_SIZE     -4
 209 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
 210 #define CONFIG_SYS_NS16550_CLK          1000000
 211 #elif defined(CONFIG_TARGET_SOCFPGA_GEN5)
 212 #define CONFIG_SYS_NS16550_COM1         SOCFPGA_UART0_ADDRESS
 213 #define CONFIG_SYS_NS16550_CLK          100000000
 214 #elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
 215 #define CONFIG_SYS_NS16550_COM1        SOCFPGA_UART1_ADDRESS
 216 #define CONFIG_SYS_NS16550_CLK          50000000
 217 #endif
 218 #define CONFIG_CONS_INDEX               1
 219
 220 /*
 221  * USB
 222  */
 223
 224 /*
 225  * USB Gadget (DFU, UMS)
 226  */
 227 #if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE)
 228 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 229
 230 #define CONFIG_SYS_DFU_DATA_BUF_SIZE    (16 * 1024 * 1024)
 231 #define DFU_DEFAULT_POLL_TIMEOUT        300
 232
 233 /* USB IDs */
 234 #define CONFIG_G_DNL_UMS_VENDOR_NUM     0x0525
 235 #define CONFIG_G_DNL_UMS_PRODUCT_NUM    0xA4A5
 236 #endif
 237
 238 /*
 239  * U-Boot environment
 240  */
 241 #if !defined(CONFIG_ENV_SIZE)
 242 #define CONFIG_ENV_SIZE                 (8 * 1024)
 243 #endif
 244
 245 /* Environment for SDMMC boot */
 246 #if defined(CONFIG_ENV_IS_IN_MMC) && !defined(CONFIG_ENV_OFFSET)
 247 #define CONFIG_SYS_MMC_ENV_DEV          0 /* device 0 */
 248 #define CONFIG_ENV_OFFSET               (34 * 512) /* just after the GPT */
 249 #endif
 250
 251 /* Environment for QSPI boot */
 252 #if defined(CONFIG_ENV_IS_IN_SPI_FLASH) && !defined(CONFIG_ENV_OFFSET)
 253 #define CONFIG_ENV_OFFSET               0x00100000
 254 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
 255 #endif
 256
 257 /*
 258  * mtd partitioning for serial NOR flash
 259  *
 260  * device nor0 <ff705000.spi.0>, # parts = 6
 261  * #: name                size            offset          mask_flags
 262  * 0: u-boot              0x00100000      0x00000000      0
 263  * 1: env1                0x00040000      0x00100000      0
 264  * 2: env2                0x00040000      0x00140000      0
 265  * 3: UBI                 0x03e80000      0x00180000      0
 266  * 4: boot                0x00e80000      0x00180000      0
 267  * 5: rootfs              0x01000000      0x01000000      0
 268  *
 269  */
 270 #if defined(CONFIG_CMD_SF) && !defined(MTDPARTS_DEFAULT)
 271 #define MTDPARTS_DEFAULT        "mtdparts=ff705000.spi.0:"\
 272                                 "1m(u-boot),"           \
 273                                 "256k(env1),"           \
 274                                 "256k(env2),"           \
 275                                 "14848k(boot),"         \
 276                                 "16m(rootfs),"          \
 277                                 "-@1536k(UBI)\0"
 278 #endif
 279
 280 /*
 281  * SPL
 282  *
 283  * SRAM Memory layout:
 284  *
 285  * 0xFFFF_0000 ...... Start of SRAM
 286  * 0xFFFF_xxxx ...... Top of stack (grows down)
 287  * 0xFFFF_yyyy ...... Malloc area
 288  * 0xFFFF_zzzz ...... Global Data
 289  * 0xFFFF_FF00 ...... End of SRAM
 290  */
 291 #define CONFIG_SPL_FRAMEWORK
 292 #define CONFIG_SPL_TEXT_BASE            CONFIG_SYS_INIT_RAM_ADDR
 293 #define CONFIG_SPL_MAX_SIZE             CONFIG_SYS_INIT_RAM_SIZE
 294
 295 /* SPL SDMMC boot support */
 296 #ifdef CONFIG_SPL_MMC_SUPPORT
 297 #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
 298 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME         "u-boot-dtb.img"
 299 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 300 #endif
 301 #else
 302 #ifndef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
 303 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION      1
 304 #endif
 305 #endif
 306
 307 /* SPL QSPI boot support */
 308 #ifdef CONFIG_SPL_SPI_SUPPORT
 309 #define CONFIG_SPL_SPI_LOAD
 310 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x40000
 311 #endif
 312
 313 /* SPL NAND boot support */
 314 #ifdef CONFIG_SPL_NAND_SUPPORT
 315 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 316 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 317 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x40000
 318 #endif
 319
 320 /*
 321  * Stack setup
 322  */
 323 #define CONFIG_SPL_STACK                CONFIG_SYS_INIT_SP_ADDR
 324
 325 /* Extra Environment */
 326 #ifndef CONFIG_SPL_BUILD
 327 #include <config_distro_defaults.h>
 328
 329 #ifdef CONFIG_CMD_PXE
 330 #define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
 331 #else
 332 #define BOOT_TARGET_DEVICES_PXE(func)
 333 #endif
 334
 335 #ifdef CONFIG_CMD_MMC
 336 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
 337 #else
 338 #define BOOT_TARGET_DEVICES_MMC(func)
 339 #endif
 340
 341 #define BOOT_TARGET_DEVICES(func) \
 342         BOOT_TARGET_DEVICES_MMC(func) \
 343         BOOT_TARGET_DEVICES_PXE(func) \
 344         func(DHCP, dhcp, na)
 345
 346 #include <config_distro_bootcmd.h>
 347
 348 #ifndef CONFIG_EXTRA_ENV_SETTINGS
 349 #define CONFIG_EXTRA_ENV_SETTINGS \
 350         "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
 351         "bootm_size=0xa000000\0" \
 352         "kernel_addr_r="__stringify(CONFIG_SYS_LOAD_ADDR)"\0" \
 353         "fdt_addr_r=0x02000000\0" \
 354         "scriptaddr=0x02100000\0" \
 355         "pxefile_addr_r=0x02200000\0" \
 356         "ramdisk_addr_r=0x02300000\0" \
 357         BOOTENV
 358
 359 #endif
 360 #endif
 361
 362 #endif  /* __CONFIG_SOCFPGA_COMMON_H__ */