git.sur5r.net Git - u-boot/blob - include/configs/socfpga_mcvevk.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2015 Marek Vasut <marex@denx.de>
   4  */
   5 #ifndef __CONFIG_ARIES_MCVEVK_H__
   6 #define __CONFIG_ARIES_MCVEVK_H__
   7
   8 #include <asm/arch/base_addr_ac5.h>
   9
  10 /* Memory configurations */
  11 #define PHYS_SDRAM_1_SIZE               0x40000000      /* 1GiB on MCV */
  12
  13 /* Booting Linux */
  14 #define CONFIG_BOOTFILE         "fitImage"
  15 #define CONFIG_PREBOOT          "run try_bootscript"
  16 #define CONFIG_BOOTCOMMAND      "run mmc_mmc"
  17 #define CONFIG_LOADADDR         0x01000000
  18 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
  19
  20 /* Environment is in MMC */
  21 #define CONFIG_ENV_OVERWRITE
  22
  23 /* Extra Environment */
  24 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  25         "consdev=ttyS0\0"                                               \
  26         "baudrate=115200\0"                                             \
  27         "bootscript=boot.scr\0"                                         \
  28         "bootdev=/dev/mmcblk0p2\0"                                      \
  29         "rootdev=/dev/mmcblk0p3\0"                                      \
  30         "netdev=eth0\0"                                                 \
  31         "hostname=mcvevk\0"                                             \
  32         "kernel_addr_r=0x10000000\0"                                    \
  33         "dfu_alt_info=mmc raw 0 3867148288\0"                           \
  34         "update_filename=u-boot-with-spl.sfp\0"                         \
  35         "update_sd_offset=0x800\0"                                      \
  36         "update_sd="            /* Update the SD firmware partition */  \
  37                 "if mmc rescan ; then "                                 \
  38                 "if tftp ${update_filename} ; then "                    \
  39                 "setexpr fw_sz ${filesize} / 0x200 ; "  /* SD block size */ \
  40                 "setexpr fw_sz ${fw_sz} + 1 ; "                         \
  41                 "mmc write ${loadaddr} ${update_sd_offset} ${fw_sz} ; " \
  42                 "fi ; "                                                 \
  43                 "fi\0"                                                  \
  44         "update_qspi_offset=0x0\0"                                      \
  45         "update_qspi="          /* Update the QSPI firmware */          \
  46                 "if sf probe ; then "                                   \
  47                 "if tftp ${update_filename} ; then "                    \
  48                 "sf update ${loadaddr} ${update_qspi_offset} ${filesize} ; " \
  49                 "fi ; "                                                 \
  50                 "fi\0"                                                  \
  51         "fpga_filename=output_file.rbf\0"                               \
  52         "load_fpga="            /* Load FPGA bitstream */               \
  53                 "if tftp ${fpga_filename} ; then "                      \
  54                 "fpga load 0 $loadaddr $filesize ; "                    \
  55                 "bridge enable ; "                                      \
  56                 "fi\0"                                                  \
  57         "addcons="                                                      \
  58                 "setenv bootargs ${bootargs} "                          \
  59                 "console=${consdev},${baudrate}\0"                      \
  60         "addip="                                                        \
  61                 "setenv bootargs ${bootargs} "                          \
  62                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
  63                         "${netmask}:${hostname}:${netdev}:off\0"        \
  64         "addmisc="                                                      \
  65                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
  66         "addargs=run addcons addmisc\0"                                 \
  67         "mmcload="                                                      \
  68                 "mmc rescan ; "                                         \
  69                 "load mmc 0:2 ${kernel_addr_r} ${bootfile}\0"           \
  70         "netload="                                                      \
  71                 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
  72         "miscargs=nohlt panic=1\0"                                      \
  73         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
  74         "nfsargs="                                                      \
  75                 "setenv bootargs root=/dev/nfs rw "                     \
  76                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
  77         "mmc_mmc="                                                      \
  78                 "run mmcload mmcargs addargs ; "                        \
  79                 "bootm ${kernel_addr_r}\0"                              \
  80         "mmc_nfs="                                                      \
  81                 "run mmcload nfsargs addip addargs ; "                  \
  82                 "bootm ${kernel_addr_r}\0"                              \
  83         "net_mmc="                                                      \
  84                 "run netload mmcargs addargs ; "                        \
  85                 "bootm ${kernel_addr_r}\0"                              \
  86         "net_nfs="                                                      \
  87                 "run netload nfsargs addip addargs ; "                  \
  88                 "bootm ${kernel_addr_r}\0"                              \
  89         "try_bootscript="                                               \
  90                 "mmc rescan;"                                           \
  91                 "if test -e mmc 0:2 ${bootscript} ; then "              \
  92                 "if load mmc 0:2 ${kernel_addr_r} ${bootscript};"       \
  93                 "then ; "                                               \
  94                         "echo Running bootscript... ; "                 \
  95                         "source ${kernel_addr_r} ; "                    \
  96                 "fi ; "                                                 \
  97                 "fi\0"
  98
  99 /* The rest of the configuration is shared */
 100 #include <configs/socfpga_common.h>
 101
 102 #endif  /* __CONFIG_ARIES_MCVEVK_H__ */