]> git.sur5r.net Git - u-boot/blob - include/fs.h
Merge branch 'master' of git://git.denx.de/u-boot-sunxi
[u-boot] / include / fs.h
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
4  */
5 #ifndef _FS_H
6 #define _FS_H
7
8 #include <common.h>
9
10 #define FS_TYPE_ANY     0
11 #define FS_TYPE_FAT     1
12 #define FS_TYPE_EXT     2
13 #define FS_TYPE_SANDBOX 3
14 #define FS_TYPE_UBIFS   4
15 #define FS_TYPE_BTRFS   5
16
17 /*
18  * Tell the fs layer which block device an partition to use for future
19  * commands. This also internally identifies the filesystem that is present
20  * within the partition. The identification process may be limited to a
21  * specific filesystem type by passing FS_* in the fstype parameter.
22  *
23  * Returns 0 on success.
24  * Returns non-zero if there is an error accessing the disk or partition, or
25  * no known filesystem type could be recognized on it.
26  */
27 int fs_set_blk_dev(const char *ifname, const char *dev_part_str, int fstype);
28
29 /*
30  * fs_set_blk_dev_with_part - Set current block device + partition
31  *
32  * Similar to fs_set_blk_dev(), but useful for cases where you already
33  * know the blk_desc and part number.
34  *
35  * Returns 0 on success.
36  * Returns non-zero if invalid partition or error accessing the disk.
37  */
38 int fs_set_blk_dev_with_part(struct blk_desc *desc, int part);
39
40 /**
41  * fs_get_type_name() - Get type of current filesystem
42  *
43  * Return: Pointer to filesystem name
44  *
45  * Returns a string describing the current filesystem, or the sentinel
46  * "unsupported" for any unrecognised filesystem.
47  */
48 const char *fs_get_type_name(void);
49
50 /*
51  * Print the list of files on the partition previously set by fs_set_blk_dev(),
52  * in directory "dirname".
53  *
54  * Returns 0 on success. Returns non-zero on error.
55  */
56 int fs_ls(const char *dirname);
57
58 /*
59  * Determine whether a file exists
60  *
61  * Returns 1 if the file exists, 0 if it doesn't exist.
62  */
63 int fs_exists(const char *filename);
64
65 /*
66  * fs_size - Determine a file's size
67  *
68  * @filename: Name of the file
69  * @size: Size of file
70  * @return 0 if ok with valid *size, negative on error
71  */
72 int fs_size(const char *filename, loff_t *size);
73
74 /*
75  * fs_read - Read file from the partition previously set by fs_set_blk_dev()
76  * Note that not all filesystem types support either/both offset!=0 or len!=0.
77  *
78  * @filename: Name of file to read from
79  * @addr: The address to read into
80  * @offset: The offset in file to read from
81  * @len: The number of bytes to read. Maybe 0 to read entire file
82  * @actread: Returns the actual number of bytes read
83  * @return 0 if ok with valid *actread, -1 on error conditions
84  */
85 int fs_read(const char *filename, ulong addr, loff_t offset, loff_t len,
86             loff_t *actread);
87
88 /*
89  * fs_write - Write file to the partition previously set by fs_set_blk_dev()
90  * Note that not all filesystem types support offset!=0.
91  *
92  * @filename: Name of file to read from
93  * @addr: The address to read into
94  * @offset: The offset in file to read from. Maybe 0 to write to start of file
95  * @len: The number of bytes to write
96  * @actwrite: Returns the actual number of bytes written
97  * @return 0 if ok with valid *actwrite, -1 on error conditions
98  */
99 int fs_write(const char *filename, ulong addr, loff_t offset, loff_t len,
100              loff_t *actwrite);
101
102 /*
103  * Directory entry types, matches the subset of DT_x in posix readdir()
104  * which apply to u-boot.
105  */
106 #define FS_DT_DIR  4         /* directory */
107 #define FS_DT_REG  8         /* regular file */
108 #define FS_DT_LNK  10        /* symbolic link */
109
110 /*
111  * A directory entry, returned by fs_readdir().  Returns information
112  * about the file/directory at the current directory entry position.
113  */
114 struct fs_dirent {
115         unsigned type;       /* one of FS_DT_x (not a mask) */
116         loff_t size;         /* size in bytes */
117         char name[256];
118 };
119
120 /* Note: fs_dir_stream should be treated as opaque to the user of fs layer */
121 struct fs_dir_stream {
122         /* private to fs. layer: */
123         struct blk_desc *desc;
124         int part;
125 };
126
127 /*
128  * fs_opendir - Open a directory
129  *
130  * @filename: the path to directory to open
131  * @return a pointer to the directory stream or NULL on error and errno
132  *    set appropriately
133  */
134 struct fs_dir_stream *fs_opendir(const char *filename);
135
136 /*
137  * fs_readdir - Read the next directory entry in the directory stream.
138  *
139  * Works in an analogous way to posix readdir().  The previously returned
140  * directory entry is no longer valid after calling fs_readdir() again.
141  * After fs_closedir() is called, the returned directory entry is no
142  * longer valid.
143  *
144  * @dirs: the directory stream
145  * @return the next directory entry (only valid until next fs_readdir() or
146  *    fs_closedir() call, do not attempt to free()) or NULL if the end of
147  *    the directory is reached.
148  */
149 struct fs_dirent *fs_readdir(struct fs_dir_stream *dirs);
150
151 /*
152  * fs_closedir - close a directory stream
153  *
154  * @dirs: the directory stream
155  */
156 void fs_closedir(struct fs_dir_stream *dirs);
157
158 /*
159  * Common implementation for various filesystem commands, optionally limited
160  * to a specific filesystem type via the fstype parameter.
161  */
162 int do_size(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
163                 int fstype);
164 int do_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
165                 int fstype);
166 int do_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
167                 int fstype);
168 int file_exists(const char *dev_type, const char *dev_part, const char *file,
169                 int fstype);
170 int do_save(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
171                 int fstype);
172
173 /*
174  * Determine the UUID of the specified filesystem and print it. Optionally it is
175  * possible to store the UUID directly in env.
176  */
177 int do_fs_uuid(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
178                 int fstype);
179
180 /*
181  * Determine the type of the specified filesystem and print it. Optionally it is
182  * possible to store the type directly in env.
183  */
184 int do_fs_type(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
185
186 #endif /* _FS_H */