git.sur5r.net Git - u-boot/blob - net/eth-uclass.c

   1 /*
   2  * (C) Copyright 2001-2015
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  * Joe Hershberger, National Instruments
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #include <common.h>
  10 #include <dm.h>
  11 #include <environment.h>
  12 #include <net.h>
  13 #include <dm/device-internal.h>
  14 #include <dm/uclass-internal.h>
  15 #include "eth_internal.h"
  16
  17 DECLARE_GLOBAL_DATA_PTR;
  18
  19 /**
  20  * struct eth_device_priv - private structure for each Ethernet device
  21  *
  22  * @state: The state of the Ethernet MAC driver (defined by enum eth_state_t)
  23  */
  24 struct eth_device_priv {
  25         enum eth_state_t state;
  26 };
  27
  28 /**
  29  * struct eth_uclass_priv - The structure attached to the uclass itself
  30  *
  31  * @current: The Ethernet device that the network functions are using
  32  */
  33 struct eth_uclass_priv {
  34         struct udevice *current;
  35 };
  36
  37 /* eth_errno - This stores the most recent failure code from DM functions */
  38 static int eth_errno;
  39
  40 static struct eth_uclass_priv *eth_get_uclass_priv(void)
  41 {
  42         struct uclass *uc;
  43
  44         uclass_get(UCLASS_ETH, &uc);
  45         assert(uc);
  46         return uc->priv;
  47 }
  48
  49 void eth_set_current_to_next(void)
  50 {
  51         struct eth_uclass_priv *uc_priv;
  52
  53         uc_priv = eth_get_uclass_priv();
  54         if (uc_priv->current)
  55                 uclass_next_device(&uc_priv->current);
  56         if (!uc_priv->current)
  57                 uclass_first_device(UCLASS_ETH, &uc_priv->current);
  58 }
  59
  60 /*
  61  * Typically this will simply return the active device.
  62  * In the case where the most recent active device was unset, this will attempt
  63  * to return the first device. If that device doesn't exist or fails to probe,
  64  * this function will return NULL.
  65  */
  66 struct udevice *eth_get_dev(void)
  67 {
  68         struct eth_uclass_priv *uc_priv;
  69
  70         uc_priv = eth_get_uclass_priv();
  71         if (!uc_priv->current)
  72                 eth_errno = uclass_first_device(UCLASS_ETH,
  73                                     &uc_priv->current);
  74         return uc_priv->current;
  75 }
  76
  77 /*
  78  * Typically this will just store a device pointer.
  79  * In case it was not probed, we will attempt to do so.
  80  * dev may be NULL to unset the active device.
  81  */
  82 void eth_set_dev(struct udevice *dev)
  83 {
  84         if (dev && !device_active(dev)) {
  85                 eth_errno = device_probe(dev);
  86                 if (eth_errno)
  87                         dev = NULL;
  88         }
  89
  90         eth_get_uclass_priv()->current = dev;
  91 }
  92
  93 /*
  94  * Find the udevice that either has the name passed in as devname or has an
  95  * alias named devname.
  96  */
  97 struct udevice *eth_get_dev_by_name(const char *devname)
  98 {
  99         int seq = -1;
 100         char *endp = NULL;
 101         const char *startp = NULL;
 102         struct udevice *it;
 103         struct uclass *uc;
 104         int len = strlen("eth");
 105
 106         /* Must be longer than 3 to be an alias */
 107         if (!strncmp(devname, "eth", len) && strlen(devname) > len) {
 108                 startp = devname + len;
 109                 seq = simple_strtoul(startp, &endp, 10);
 110         }
 111
 112         uclass_get(UCLASS_ETH, &uc);
 113         uclass_foreach_dev(it, uc) {
 114                 /*
 115                  * We need the seq to be valid, so try to probe it.
 116                  * If the probe fails, the seq will not match since it will be
 117                  * -1 instead of what we are looking for.
 118                  * We don't care about errors from probe here. Either they won't
 119                  * match an alias or it will match a literal name and we'll pick
 120                  * up the error when we try to probe again in eth_set_dev().
 121                  */
 122                 if (device_probe(it))
 123                         continue;
 124                 /* Check for the name or the sequence number to match */
 125                 if (strcmp(it->name, devname) == 0 ||
 126                     (endp > startp && it->seq == seq))
 127                         return it;
 128         }
 129
 130         return NULL;
 131 }
 132
 133 unsigned char *eth_get_ethaddr(void)
 134 {
 135         struct eth_pdata *pdata;
 136
 137         if (eth_get_dev()) {
 138                 pdata = eth_get_dev()->platdata;
 139                 return pdata->enetaddr;
 140         }
 141
 142         return NULL;
 143 }
 144
 145 /* Set active state without calling start on the driver */
 146 int eth_init_state_only(void)
 147 {
 148         struct udevice *current;
 149         struct eth_device_priv *priv;
 150
 151         current = eth_get_dev();
 152         if (!current || !device_active(current))
 153                 return -EINVAL;
 154
 155         priv = current->uclass_priv;
 156         priv->state = ETH_STATE_ACTIVE;
 157
 158         return 0;
 159 }
 160
 161 /* Set passive state without calling stop on the driver */
 162 void eth_halt_state_only(void)
 163 {
 164         struct udevice *current;
 165         struct eth_device_priv *priv;
 166
 167         current = eth_get_dev();
 168         if (!current || !device_active(current))
 169                 return;
 170
 171         priv = current->uclass_priv;
 172         priv->state = ETH_STATE_PASSIVE;
 173 }
 174
 175 int eth_get_dev_index(void)
 176 {
 177         if (eth_get_dev())
 178                 return eth_get_dev()->seq;
 179         return -1;
 180 }
 181
 182 static int eth_write_hwaddr(struct udevice *dev)
 183 {
 184         struct eth_pdata *pdata;
 185         int ret = 0;
 186
 187         if (!dev || !device_active(dev))
 188                 return -EINVAL;
 189
 190         /* seq is valid since the device is active */
 191         if (eth_get_ops(dev)->write_hwaddr && !eth_mac_skip(dev->seq)) {
 192                 pdata = dev->platdata;
 193                 if (!is_valid_ethaddr(pdata->enetaddr)) {
 194                         printf("\nError: %s address %pM illegal value\n",
 195                                dev->name, pdata->enetaddr);
 196                         return -EINVAL;
 197                 }
 198
 199                 /*
 200                  * Drivers are allowed to decide not to implement this at
 201                  * run-time. E.g. Some devices may use it and some may not.
 202                  */
 203                 ret = eth_get_ops(dev)->write_hwaddr(dev);
 204                 if (ret == -ENOSYS)
 205                         ret = 0;
 206                 if (ret)
 207                         printf("\nWarning: %s failed to set MAC address\n",
 208                                dev->name);
 209         }
 210
 211         return ret;
 212 }
 213
 214 static int on_ethaddr(const char *name, const char *value, enum env_op op,
 215         int flags)
 216 {
 217         int index;
 218         int retval;
 219         struct udevice *dev;
 220
 221         /* look for an index after "eth" */
 222         index = simple_strtoul(name + 3, NULL, 10);
 223
 224         retval = uclass_find_device_by_seq(UCLASS_ETH, index, false, &dev);
 225         if (!retval) {
 226                 struct eth_pdata *pdata = dev->platdata;
 227                 switch (op) {
 228                 case env_op_create:
 229                 case env_op_overwrite:
 230                         eth_parse_enetaddr(value, pdata->enetaddr);
 231                         eth_write_hwaddr(dev);
 232                         break;
 233                 case env_op_delete:
 234                         memset(pdata->enetaddr, 0, ARP_HLEN);
 235                 }
 236         }
 237
 238         return 0;
 239 }
 240 U_BOOT_ENV_CALLBACK(ethaddr, on_ethaddr);
 241
 242 int eth_init(void)
 243 {
 244         char *ethact = getenv("ethact");
 245         char *ethrotate = getenv("ethrotate");
 246         struct udevice *current = NULL;
 247         struct udevice *old_current;
 248         int ret = -ENODEV;
 249
 250         /*
 251          * When 'ethrotate' variable is set to 'no' and 'ethact' variable
 252          * is already set to an ethernet device, we should stick to 'ethact'.
 253          */
 254         if ((ethrotate != NULL) && (strcmp(ethrotate, "no") == 0)) {
 255                 if (ethact) {
 256                         current = eth_get_dev_by_name(ethact);
 257                         if (!current)
 258                                 return -EINVAL;
 259                 }
 260         }
 261
 262         if (!current) {
 263                 current = eth_get_dev();
 264                 if (!current) {
 265                         printf("No ethernet found.\n");
 266                         return -ENODEV;
 267                 }
 268         }
 269
 270         old_current = current;
 271         do {
 272                 if (current) {
 273                         debug("Trying %s\n", current->name);
 274
 275                         if (device_active(current)) {
 276                                 ret = eth_get_ops(current)->start(current);
 277                                 if (ret >= 0) {
 278                                         struct eth_device_priv *priv =
 279                                                 current->uclass_priv;
 280
 281                                         priv->state = ETH_STATE_ACTIVE;
 282                                         return 0;
 283                                 }
 284                         } else {
 285                                 ret = eth_errno;
 286                         }
 287
 288                         debug("FAIL\n");
 289                 } else {
 290                         debug("PROBE FAIL\n");
 291                 }
 292
 293                 /*
 294                  * If ethrotate is enabled, this will change "current",
 295                  * otherwise we will drop out of this while loop immediately
 296                  */
 297                 eth_try_another(0);
 298                 /* This will ensure the new "current" attempted to probe */
 299                 current = eth_get_dev();
 300         } while (old_current != current);
 301
 302         return ret;
 303 }
 304
 305 void eth_halt(void)
 306 {
 307         struct udevice *current;
 308         struct eth_device_priv *priv;
 309
 310         current = eth_get_dev();
 311         if (!current || !device_active(current))
 312                 return;
 313
 314         eth_get_ops(current)->stop(current);
 315         priv = current->uclass_priv;
 316         priv->state = ETH_STATE_PASSIVE;
 317 }
 318
 319 int eth_is_active(struct udevice *dev)
 320 {
 321         struct eth_device_priv *priv;
 322
 323         if (!dev || !device_active(dev))
 324                 return 0;
 325
 326         priv = dev_get_uclass_priv(dev);
 327         return priv->state == ETH_STATE_ACTIVE;
 328 }
 329
 330 int eth_send(void *packet, int length)
 331 {
 332         struct udevice *current;
 333         int ret;
 334
 335         current = eth_get_dev();
 336         if (!current)
 337                 return -ENODEV;
 338
 339         if (!device_active(current))
 340                 return -EINVAL;
 341
 342         ret = eth_get_ops(current)->send(current, packet, length);
 343         if (ret < 0) {
 344                 /* We cannot completely return the error at present */
 345                 debug("%s: send() returned error %d\n", __func__, ret);
 346         }
 347         return ret;
 348 }
 349
 350 int eth_rx(void)
 351 {
 352         struct udevice *current;
 353         uchar *packet;
 354         int flags;
 355         int ret;
 356         int i;
 357
 358         current = eth_get_dev();
 359         if (!current)
 360                 return -ENODEV;
 361
 362         if (!device_active(current))
 363                 return -EINVAL;
 364
 365         /* Process up to 32 packets at one time */
 366         flags = ETH_RECV_CHECK_DEVICE;
 367         for (i = 0; i < 32; i++) {
 368                 ret = eth_get_ops(current)->recv(current, flags, &packet);
 369                 flags = 0;
 370                 if (ret > 0)
 371                         net_process_received_packet(packet, ret);
 372                 if (ret >= 0 && eth_get_ops(current)->free_pkt)
 373                         eth_get_ops(current)->free_pkt(current, packet, ret);
 374                 if (ret <= 0)
 375                         break;
 376         }
 377         if (ret == -EAGAIN)
 378                 ret = 0;
 379         if (ret < 0) {
 380                 /* We cannot completely return the error at present */
 381                 debug("%s: recv() returned error %d\n", __func__, ret);
 382         }
 383         return ret;
 384 }
 385
 386 int eth_initialize(void)
 387 {
 388         int num_devices = 0;
 389         struct udevice *dev;
 390
 391         eth_common_init();
 392
 393         /*
 394          * Devices need to write the hwaddr even if not started so that Linux
 395          * will have access to the hwaddr that u-boot stored for the device.
 396          * This is accomplished by attempting to probe each device and calling
 397          * their write_hwaddr() operation.
 398          */
 399         uclass_first_device(UCLASS_ETH, &dev);
 400         if (!dev) {
 401                 printf("No ethernet found.\n");
 402                 bootstage_error(BOOTSTAGE_ID_NET_ETH_START);
 403         } else {
 404                 char *ethprime = getenv("ethprime");
 405                 struct udevice *prime_dev = NULL;
 406
 407                 if (ethprime)
 408                         prime_dev = eth_get_dev_by_name(ethprime);
 409                 if (prime_dev) {
 410                         eth_set_dev(prime_dev);
 411                         eth_current_changed();
 412                 } else {
 413                         eth_set_dev(NULL);
 414                 }
 415
 416                 bootstage_mark(BOOTSTAGE_ID_NET_ETH_INIT);
 417                 do {
 418                         if (num_devices)
 419                                 printf(", ");
 420
 421                         printf("eth%d: %s", dev->seq, dev->name);
 422
 423                         if (ethprime && dev == prime_dev)
 424                                 printf(" [PRIME]");
 425
 426                         eth_write_hwaddr(dev);
 427
 428                         uclass_next_device(&dev);
 429                         num_devices++;
 430                 } while (dev);
 431
 432                 putc('\n');
 433         }
 434
 435         return num_devices;
 436 }
 437
 438 static int eth_post_bind(struct udevice *dev)
 439 {
 440         if (strchr(dev->name, ' ')) {
 441                 printf("\nError: eth device name \"%s\" has a space!\n",
 442                        dev->name);
 443                 return -EINVAL;
 444         }
 445
 446         return 0;
 447 }
 448
 449 static int eth_pre_unbind(struct udevice *dev)
 450 {
 451         /* Don't hang onto a pointer that is going away */
 452         if (dev == eth_get_uclass_priv()->current)
 453                 eth_set_dev(NULL);
 454
 455         return 0;
 456 }
 457
 458 static int eth_post_probe(struct udevice *dev)
 459 {
 460         struct eth_device_priv *priv = dev->uclass_priv;
 461         struct eth_pdata *pdata = dev->platdata;
 462         unsigned char env_enetaddr[ARP_HLEN];
 463
 464 #if defined(CONFIG_NEEDS_MANUAL_RELOC)
 465         struct eth_ops *ops = eth_get_ops(dev);
 466         static int reloc_done;
 467
 468         if (!reloc_done) {
 469                 if (ops->start)
 470                         ops->start += gd->reloc_off;
 471                 if (ops->send)
 472                         ops->send += gd->reloc_off;
 473                 if (ops->recv)
 474                         ops->recv += gd->reloc_off;
 475                 if (ops->free_pkt)
 476                         ops->free_pkt += gd->reloc_off;
 477                 if (ops->stop)
 478                         ops->stop += gd->reloc_off;
 479 #ifdef CONFIG_MCAST_TFTP
 480                 if (ops->mcast)
 481                         ops->mcast += gd->reloc_off;
 482 #endif
 483                 if (ops->write_hwaddr)
 484                         ops->write_hwaddr += gd->reloc_off;
 485                 if (ops->read_rom_hwaddr)
 486                         ops->read_rom_hwaddr += gd->reloc_off;
 487
 488                 reloc_done++;
 489         }
 490 #endif
 491
 492         priv->state = ETH_STATE_INIT;
 493
 494         /* Check if the device has a MAC address in ROM */
 495         if (eth_get_ops(dev)->read_rom_hwaddr)
 496                 eth_get_ops(dev)->read_rom_hwaddr(dev);
 497
 498         eth_getenv_enetaddr_by_index("eth", dev->seq, env_enetaddr);
 499         if (!is_zero_ethaddr(env_enetaddr)) {
 500                 if (!is_zero_ethaddr(pdata->enetaddr) &&
 501                     memcmp(pdata->enetaddr, env_enetaddr, ARP_HLEN)) {
 502                         printf("\nWarning: %s MAC addresses don't match:\n",
 503                                dev->name);
 504                         printf("Address in ROM is          %pM\n",
 505                                pdata->enetaddr);
 506                         printf("Address in environment is  %pM\n",
 507                                env_enetaddr);
 508                 }
 509
 510                 /* Override the ROM MAC address */
 511                 memcpy(pdata->enetaddr, env_enetaddr, ARP_HLEN);
 512         } else if (is_valid_ethaddr(pdata->enetaddr)) {
 513                 eth_setenv_enetaddr_by_index("eth", dev->seq, pdata->enetaddr);
 514                 printf("\nWarning: %s using MAC address from ROM\n",
 515                        dev->name);
 516         } else if (is_zero_ethaddr(pdata->enetaddr) ||
 517                    !is_valid_ethaddr(pdata->enetaddr)) {
 518 #ifdef CONFIG_NET_RANDOM_ETHADDR
 519                 net_random_ethaddr(pdata->enetaddr);
 520                 printf("\nWarning: %s (eth%d) using random MAC address - %pM\n",
 521                        dev->name, dev->seq, pdata->enetaddr);
 522 #else
 523                 printf("\nError: %s address not set.\n",
 524                        dev->name);
 525                 return -EINVAL;
 526 #endif
 527         }
 528
 529         return 0;
 530 }
 531
 532 static int eth_pre_remove(struct udevice *dev)
 533 {
 534         struct eth_pdata *pdata = dev->platdata;
 535
 536         eth_get_ops(dev)->stop(dev);
 537
 538         /* clear the MAC address */
 539         memset(pdata->enetaddr, 0, ARP_HLEN);
 540
 541         return 0;
 542 }
 543
 544 UCLASS_DRIVER(eth) = {
 545         .name           = "eth",
 546         .id             = UCLASS_ETH,
 547         .post_bind      = eth_post_bind,
 548         .pre_unbind     = eth_pre_unbind,
 549         .post_probe     = eth_post_probe,
 550         .pre_remove     = eth_pre_remove,
 551         .priv_auto_alloc_size = sizeof(struct eth_uclass_priv),
 552         .per_device_auto_alloc_size = sizeof(struct eth_device_priv),
 553         .flags          = DM_UC_FLAG_SEQ_ALIAS,
 554 };