]> git.sur5r.net Git - u-boot/blob - tools/zynqimage.c
Merge git://git.denx.de/u-boot-imx
[u-boot] / tools / zynqimage.c
1 /*
2  * Copyright (C) 2015 Nathan Rossi <nathan@nathanrossi.com>
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  *
6  * The following Boot Header format/structures and values are defined in the
7  * following documents:
8  *   * Xilinx Zynq-7000 Technical Reference Manual (Section 6.3)
9  *   * Xilinx Zynq-7000 Software Developers Guide (Appendix A.7 and A.8)
10  *
11  * Expected Header Size = 0x8C0
12  * Forced as 'little' endian, 32-bit words
13  *
14  *  0x  0 - Interrupt Table (8 words)
15  *  ...     (Default value = 0xeafffffe)
16  *  0x 1f
17  *  0x 20 - Width Detection
18  *         * DEFAULT_WIDTHDETECTION    0xaa995566
19  *  0x 24 - Image Identifier
20  *         * DEFAULT_IMAGEIDENTIFIER   0x584c4e58
21  *  0x 28 - Encryption
22  *         * 0x00000000 - None
23  *         * 0xa5c3c5a3 - eFuse
24  *         * 0x3a5c3c5a - bbRam
25  *  0x 2C - User Field
26  *  0x 30 - Image Offset
27  *  0x 34 - Image Size
28  *  0x 38 - Reserved (0x00000000) (according to spec)
29  *          * FSBL defines this field for Image Destination Address.
30  *  0x 3C - Image Load
31  *  0x 40 - Image Stored Size
32  *  0x 44 - Reserved (0x00000000) (according to spec)
33  *          * FSBL defines this field for QSPI configuration Data.
34  *  0x 48 - Checksum
35  *  0x 4c - Unused (21 words)
36  *  ...
37  *  0x 9c
38  *  0x a0 - Register Initialization, 256 Address and Data word pairs
39  *         * List is terminated with an address of 0xffffffff or
40  *  ...    * at the max number of entries
41  *  0x89c
42  *  0x8a0 - Unused (8 words)
43  *  ...
44  *  0x8bf
45  *  0x8c0 - Data/Image starts here or above
46  */
47
48 #include "imagetool.h"
49 #include "mkimage.h"
50 #include <image.h>
51
52 #define HEADER_INTERRUPT_DEFAULT (cpu_to_le32(0xeafffffe))
53 #define HEADER_REGINIT_NULL (cpu_to_le32(0xffffffff))
54 #define HEADER_WIDTHDETECTION (cpu_to_le32(0xaa995566))
55 #define HEADER_IMAGEIDENTIFIER (cpu_to_le32(0x584c4e58))
56
57 enum {
58         ENCRYPTION_EFUSE = 0xa5c3c5a3,
59         ENCRYPTION_BBRAM = 0x3a5c3c5a,
60         ENCRYPTION_NONE = 0x0,
61 };
62
63 struct zynq_reginit {
64         uint32_t address;
65         uint32_t data;
66 };
67
68 #define HEADER_INTERRUPT_VECTORS 8
69 #define HEADER_REGINITS 256
70
71 struct zynq_header {
72         uint32_t interrupt_vectors[HEADER_INTERRUPT_VECTORS]; /* 0x0 */
73         uint32_t width_detection; /* 0x20 */
74         uint32_t image_identifier; /* 0x24 */
75         uint32_t encryption; /* 0x28 */
76         uint32_t user_field; /* 0x2c */
77         uint32_t image_offset; /* 0x30 */
78         uint32_t image_size; /* 0x34 */
79         uint32_t __reserved1; /* 0x38 */
80         uint32_t image_load; /* 0x3c */
81         uint32_t image_stored_size; /* 0x40 */
82         uint32_t __reserved2; /* 0x44 */
83         uint32_t checksum; /* 0x48 */
84         uint32_t __reserved3[21]; /* 0x4c */
85         struct zynq_reginit register_init[HEADER_REGINITS]; /* 0xa0 */
86         uint32_t __reserved4[8]; /* 0x8a0 */
87 };
88
89 static struct zynq_header zynqimage_header;
90
91 static uint32_t zynqimage_checksum(struct zynq_header *ptr)
92 {
93         uint32_t checksum = 0;
94
95         if (ptr == NULL)
96                 return 0;
97
98         checksum += le32_to_cpu(ptr->width_detection);
99         checksum += le32_to_cpu(ptr->image_identifier);
100         checksum += le32_to_cpu(ptr->encryption);
101         checksum += le32_to_cpu(ptr->user_field);
102         checksum += le32_to_cpu(ptr->image_offset);
103         checksum += le32_to_cpu(ptr->image_size);
104         checksum += le32_to_cpu(ptr->__reserved1);
105         checksum += le32_to_cpu(ptr->image_load);
106         checksum += le32_to_cpu(ptr->image_stored_size);
107         checksum += le32_to_cpu(ptr->__reserved2);
108         checksum = ~checksum;
109
110         return cpu_to_le32(checksum);
111 }
112
113 static void zynqimage_default_header(struct zynq_header *ptr)
114 {
115         int i;
116
117         if (ptr == NULL)
118                 return;
119
120         ptr->width_detection = HEADER_WIDTHDETECTION;
121         ptr->image_identifier = HEADER_IMAGEIDENTIFIER;
122         ptr->encryption = cpu_to_le32(ENCRYPTION_NONE);
123
124         /* Setup not-supported/constant/reserved fields */
125         for (i = 0; i < HEADER_INTERRUPT_VECTORS; i++)
126                 ptr->interrupt_vectors[i] = HEADER_INTERRUPT_DEFAULT;
127
128         for (i = 0; i < HEADER_REGINITS; i++) {
129                 ptr->register_init[i].address = HEADER_REGINIT_NULL;
130                 ptr->register_init[i].data = HEADER_REGINIT_NULL;
131         }
132
133         /*
134          * Certain reserved fields are required to be set to 0, ensure they are
135          * set as such.
136          */
137         ptr->__reserved1 = 0x0;
138         ptr->__reserved2 = 0x0;
139 }
140
141 /* mkimage glue functions */
142 static int zynqimage_verify_header(unsigned char *ptr, int image_size,
143                 struct image_tool_params *params)
144 {
145         struct zynq_header *zynqhdr = (struct zynq_header *)ptr;
146
147         if (image_size < sizeof(struct zynq_header))
148                 return -1;
149
150         if (zynqhdr->__reserved1 != 0)
151                 return -1;
152
153         if (zynqhdr->__reserved2 != 0)
154                 return -1;
155
156         if (zynqhdr->width_detection != HEADER_WIDTHDETECTION)
157                 return -1;
158         if (zynqhdr->image_identifier != HEADER_IMAGEIDENTIFIER)
159                 return -1;
160
161         if (zynqimage_checksum(zynqhdr) != zynqhdr->checksum)
162                 return -1;
163
164         return 0;
165 }
166
167 static void zynqimage_print_header(const void *ptr)
168 {
169         struct zynq_header *zynqhdr = (struct zynq_header *)ptr;
170         int i;
171
172         printf("Image Type   : Xilinx Zynq Boot Image support\n");
173         printf("Image Offset : 0x%08x\n", le32_to_cpu(zynqhdr->image_offset));
174         printf("Image Size   : %lu bytes (%lu bytes packed)\n",
175                (unsigned long)le32_to_cpu(zynqhdr->image_size),
176                (unsigned long)le32_to_cpu(zynqhdr->image_stored_size));
177         printf("Image Load   : 0x%08x\n", le32_to_cpu(zynqhdr->image_load));
178         printf("User Field   : 0x%08x\n", le32_to_cpu(zynqhdr->user_field));
179         printf("Checksum     : 0x%08x\n", le32_to_cpu(zynqhdr->checksum));
180
181         for (i = 0; i < HEADER_INTERRUPT_VECTORS; i++) {
182                 if (zynqhdr->interrupt_vectors[i] == HEADER_INTERRUPT_DEFAULT)
183                         continue;
184
185                 printf("Modified Interrupt Vector Address [%d]: 0x%08x\n", i,
186                        le32_to_cpu(zynqhdr->interrupt_vectors[i]));
187         }
188
189         for (i = 0; i < HEADER_REGINITS; i++) {
190                 if (zynqhdr->register_init[i].address == HEADER_REGINIT_NULL)
191                         break;
192
193                 if (i == 0)
194                         printf("Custom Register Initialization:\n");
195
196                 printf("    @ 0x%08x -> 0x%08x\n",
197                        le32_to_cpu(zynqhdr->register_init[i].address),
198                        le32_to_cpu(zynqhdr->register_init[i].data));
199         }
200 }
201
202 static int zynqimage_check_params(struct image_tool_params *params)
203 {
204         if (!params)
205                 return 0;
206
207         if (params->addr != 0x0) {
208                 fprintf(stderr, "Error: Load Address cannot be specified.\n");
209                 return -1;
210         }
211
212         /*
213          * If the entry point is specified ensure it is 64 byte aligned.
214          */
215         if (params->eflag && (params->ep % 64 != 0)) {
216                 fprintf(stderr,
217                         "Error: Entry Point must be aligned to a 64-byte boundary.\n");
218                 return -1;
219         }
220
221         return !(params->lflag || params->dflag);
222 }
223
224 static int zynqimage_check_image_types(uint8_t type)
225 {
226         if (type == IH_TYPE_ZYNQIMAGE)
227                 return EXIT_SUCCESS;
228         return EXIT_FAILURE;
229 }
230
231 static void zynqimage_parse_initparams(struct zynq_header *zynqhdr,
232         const char *filename)
233 {
234         FILE *fp;
235         struct zynq_reginit reginit;
236         unsigned int reg_count = 0;
237         int r, err;
238         struct stat path_stat;
239
240         /* Expect a table of register-value pairs, e.g. "0x12345678 0x4321" */
241         fp = fopen(filename, "r");
242         if (!fp) {
243                 fprintf(stderr, "Cannot open initparams file: %s\n", filename);
244                 exit(1);
245         }
246
247         err = fstat(fileno(fp), &path_stat);
248         if (err) {
249                 fclose(fp);
250                 return;
251         }
252
253         if (!S_ISREG(path_stat.st_mode)) {
254                 fclose(fp);
255                 return;
256         }
257
258         do {
259                 r = fscanf(fp, "%x %x", &reginit.address, &reginit.data);
260                 if (r == 2) {
261                         zynqhdr->register_init[reg_count] = reginit;
262                         ++reg_count;
263                 }
264                 r = fscanf(fp, "%*[^\n]\n"); /* Skip to next line */
265         } while ((r != EOF) && (reg_count < HEADER_REGINITS));
266         fclose(fp);
267 }
268
269 static void zynqimage_set_header(void *ptr, struct stat *sbuf, int ifd,
270                 struct image_tool_params *params)
271 {
272         struct zynq_header *zynqhdr = (struct zynq_header *)ptr;
273         zynqimage_default_header(zynqhdr);
274
275         /* place image directly after header */
276         zynqhdr->image_offset =
277                 cpu_to_le32((uint32_t)sizeof(struct zynq_header));
278         zynqhdr->image_size = cpu_to_le32((uint32_t)sbuf->st_size);
279         zynqhdr->image_stored_size = zynqhdr->image_size;
280         zynqhdr->image_load = 0x0;
281         if (params->eflag)
282                 zynqhdr->image_load = cpu_to_le32((uint32_t)params->ep);
283
284         /* User can pass in text file with init list */
285         if (strlen(params->imagename2))
286                 zynqimage_parse_initparams(zynqhdr, params->imagename2);
287
288         zynqhdr->checksum = zynqimage_checksum(zynqhdr);
289 }
290
291 U_BOOT_IMAGE_TYPE(
292         zynqimage,
293         "Xilinx Zynq Boot Image support",
294         sizeof(struct zynq_header),
295         (void *)&zynqimage_header,
296         zynqimage_check_params,
297         zynqimage_verify_header,
298         zynqimage_print_header,
299         zynqimage_set_header,
300         NULL,
301         zynqimage_check_image_types,
302         NULL,
303         NULL
304 );